dmesg - aesi_minion_3_4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-18-generic (buildd@toyol) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #32-Ubuntu SMP Tue Feb 18 21:11:14 UTC 2014 (Ubuntu 3.11.0-18.32-generic 3.11.10.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000aa86cfff] usable
BIOS-e820: [mem 0x00000000aa86d000-0x00000000aaa97fff] reserved
BIOS-e820: [mem 0x00000000aaa98000-0x00000000acdd8fff] usable
BIOS-e820: [mem 0x00000000acdd9000-0x00000000ace1afff] reserved
BIOS-e820: [mem 0x00000000ace1b000-0x00000000ace3efff] usable
BIOS-e820: [mem 0x00000000ace3f000-0x00000000acebefff] reserved
BIOS-e820: [mem 0x00000000acebf000-0x00000000acfbefff] ACPI NVS
BIOS-e820: [mem 0x00000000acfbf000-0x00000000acffefff] ACPI data
BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable
BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP Folio 13 Notebook PC/17F8, BIOS F.0B 01/23/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0AD000000 mask FFF000000 uncachable
3 base 0AE000000 mask FFE000000 uncachable
4 base 0B0000000 mask FF0000000 uncachable
5 base 0FFC00000 mask FFFC00000 write-protect
6 base 100000000 mask FC0000000 write-back
7 base 140000000 mask FF0000000 write-back
8 base 14FE00000 mask FFFE00000 uncachable
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xad000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x14fc00000-0x14fdfffff]
[mem 0x14fc00000-0x14fdfffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x14c000000-0x14fbfffff]
[mem 0x14c000000-0x14fbfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x14bffffff]
[mem 0x100000000-0x14bffffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0xaa86cfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xaa7fffff] page 2M
[mem 0xaa800000-0xaa86cfff] page 4k
init_memory_mapping: [mem 0xaaa98000-0xacdd8fff]
[mem 0xaaa98000-0xaabfffff] page 4k
[mem 0xaac00000-0xacbfffff] page 2M
[mem 0xacc00000-0xacdd8fff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0xace1b000-0xace3efff]
[mem 0xace1b000-0xace3efff] page 4k
init_memory_mapping: [mem 0xacfff000-0xacffffff]
[mem 0xacfff000-0xacffffff] page 4k
RAMDISK: [mem 0x35eb0000-0x36f4ffff]
ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
ACPI: XSDT 00000000acffe120 0008C (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 00000000acffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
ACPI: DSDT 00000000acfeb000 0D623 (v01 HP INSYDE 00000000 ACPI 00040000)
ACPI: FACS 00000000acf6b000 00040
ACPI: HPET 00000000acffb000 00038 (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: APIC 00000000acffa000 0008C (v02 HP INSYDE 00000001 ACPI 00040000)
ACPI: MCFG 00000000acff9000 0003C (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: SLIC 00000000acfea000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
ACPI: MSDM 00000000acfe9000 00055 (v03 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
ACPI: WDAT 00000000acfe8000 00224 (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: SSDT 00000000acfe7000 006FE (v01 HP INSYDE 00001000 ACPI 00040000)
ACPI: BOOT 00000000acfe5000 00028 (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: ASPT 00000000acfe2000 00034 (v07 HP INSYDE 00000001 ACPI 00040000)
ACPI: ASF! 00000000acffd000 000A5 (v32 HP INSYDE 00000001 ACPI 00040000)
ACPI: SSDT 00000000acfe1000 00804 (v01 HP INSYDE 00003000 ACPI 00040000)
ACPI: SSDT 00000000acfe0000 00996 (v01 HP INSYDE 00003000 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014fdfffff]
Initmem setup node 0 [mem 0x00000000-0x14fdfffff]
NODE_DATA [mem 0x14fdf6000-0x14fdfafff]
[ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014b400000-ffff88014f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x14fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xaa86cfff]
node 0: [mem 0xaaa98000-0xacdd8fff]
node 0: [mem 0xace1b000-0xace3efff]
node 0: [mem 0xacfff000-0xacffffff]
node 0: [mem 0x100000000-0x14fdfffff]
On node 0 totalpages: 1034607
DMA zone: 64 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 10992 pages used for memmap
DMA32 zone: 703443 pages, LIFO batch:31
Normal zone: 5112 pages used for memmap
Normal zone: 327168 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xaa86d000-0xaaa97fff]
PM: Registered nosave memory: [mem 0xacdd9000-0xace1afff]
PM: Registered nosave memory: [mem 0xace3f000-0xacebefff]
PM: Registered nosave memory: [mem 0xacebf000-0xacfbefff]
PM: Registered nosave memory: [mem 0xacfbf000-0xacffefff]
PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88014fa00000 s86720 r8192 d23872 u262144
pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1018283
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3971732K/4138428K available (7154K kernel code, 1083K rwdata, 3312K rodata, 1364K init, 1420K bss, 166696K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1596.506 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.01 BogoMIPS (lpj=6386024)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27858 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2: Thermal monitoring handled by SMI
CPU3: Thermal monitoring handled by SMI
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (12772.04 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xacebf000-0xacfbefff] (1048576 bytes)
regulator-dummy: no parameters
RTC time: 7:04:51, date: 04/03/14
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000ace70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT 00000000ace71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT 00000000ace6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
_OSC request data:1 8 0
_OSC request data:1 1f 0
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
acpiphp_glue: can't evaluate _ADR (0x5)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc2704000-0xc270400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc2709000-0xc27093ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc2700000-0xc2703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc2708000-0xc27083ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc2707000-0xc27077ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc2705000-0xc27050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:02:00.0: [8086:008b] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xc2600000-0xc2601fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xc2600000-0xc26fffff]
pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xc1601000-0xc1601fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:03:00.1: [10ec:5209] type 00 class 0x080500
pci 0000:03:00.1: reg 0x10: [mem 0xc1600000-0xc16000ff]
pci 0000:03:00.1: supports D1 D2
pci 0000:03:00.1: PME# supported from D1 D2 D3hot
pci 0000:00:1c.3: PCI bridge to [bus 03-08]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xc1600000-0xc25fffff]
pci 0000:00:1c.3: bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
pci 0000:09:00.0: [1b73:1009] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xc1500000-0xc150ffff 64bit]
pci 0000:09:00.0: reg 0x18: [mem 0xc1510000-0xc1510fff 64bit]
pci 0000:09:00.0: reg 0x20: [mem 0xc1511000-0xc1511fff 64bit]
pci 0000:09:00.0: supports D1
pci 0000:09:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [mem 0xc1500000-0xc15fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xaa86d000-0xabffffff]
e820: reserve RAM buffer [mem 0xacdd9000-0xafffffff]
e820: reserve RAM buffer [mem 0xace3f000-0xafffffff]
e820: reserve RAM buffer [mem 0xad000000-0xafffffff]
e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN1e5a SYN0100 SYN0002 PNP0f13 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x20000000-0x201fffff] could not be reserved
system 00:07: [mem 0x40000000-0x401fffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xc2600000-0xc26fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03-08]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xc1600000-0xc25fffff]
pci 0000:00:1c.3: bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [mem 0xc1500000-0xc15fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xc2600000-0xc26fffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xc1600000-0xc25fffff]
pci_bus 0000:03: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xc1500000-0xc15fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17024K (ffff880035eb0000 - ffff880036f50000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa686d000-0xaa86d000] (64MB) mapped at [ffff8800a686d000-ffff8800aa86cfff]
Simple Boot Flag at 0x44 set to 0x1
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1396508691.852:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7790
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (33 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2709000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc2708000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:09:00.0: irq 40 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 44 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
usb usb3: SerialNumber: 0000:09:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
usb usb4: SerialNumber: 0000:09:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9d94dc8d073854d044b3fa3652786ac75597c2f5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 10:464:65
rtc_cmos 00:03: setting system clock to 2014-04-03 07:04:52 UTC (1396508692)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1028K (ffff8800016ff000 - ffff880001800000)
Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
systemd-udevd[124]: starting version 204
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:01:00.0: irq 45 for MSI/MSI-X
r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000063a000, b4:99:ba:f6:85:2e, XID 0c900800 IRQ 45
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
sdhci-pci 0000:03:00.1: SDHCI controller found [10ec:5209] (rev 1)
sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA
rtsx_pci 0000:03:00.0: irq 46 for MSI/MSI-X
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 46
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc2707000 port 0xc2707100 irq 47
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: SAMSUNG MZMPA128HMFU-000H1, AXM18H1Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMPA128 AXM1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 1596.373 MHz
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
Adding 4136956k swap on /dev/sda6. Priority:-1 extents:1 across:4136956k SSFS
usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c07
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: HP TrueVision HD
usb 1-1.1: Manufacturer: PK40000GO00LOE40A1CG000301E
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[305]: starting version 204
lp: driver loaded but no devices found
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP TrueVision HD (1bcf:2c07)
wmi: Mapper loaded
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
usb 1-1.2: new full-speed USB device number 4 using ehci-pci
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:02:00.0: irq 49 for MSI/MSI-X
input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
i915 0000:00:02.0: irq 50 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1.2: New USB device found, idVendor=8086, idProduct=0189
usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
Switched to clocksource tsc
type=1400 audit(1396508694.074:2): apparmor="STATUS" operation="profile_load" parent=360 profile="unconfined" name="/sbin/dhclient" pid=371 comm="apparmor_parser"
type=1400 audit(1396508694.074:3): apparmor="STATUS" operation="profile_load" parent=360 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=371 comm="apparmor_parser"
type=1400 audit(1396508694.074:4): apparmor="STATUS" operation="profile_load" parent=360 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=371 comm="apparmor_parser"
type=1400 audit(1396508694.074:5): apparmor="STATUS" operation="profile_replace" parent=360 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=371 comm="apparmor_parser"
type=1400 audit(1396508694.074:6): apparmor="STATUS" operation="profile_replace" parent=360 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=371 comm="apparmor_parser"
type=1400 audit(1396508694.074:7): apparmor="STATUS" operation="profile_replace" parent=360 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=371 comm="apparmor_parser"
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
fbcon: inteldrmfb (fb0) is primary device
iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HP WMI hotkeys as /devices/virtual/input/input4
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:33: registered as cooling_device7
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
mute LED gpio 8 polarity 1
autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Internal Mic=0x11
Mic=0xa
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2031, fw id: 988796
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
mtrr: type mismatch for b0000000,400000 old: write-back new: write-combining
mtrr: type mismatch for b0000000,200000 old: write-back new: write-combining
mtrr: type mismatch for b0000000,100000 old: write-back new: write-combining
mtrr: type mismatch for b0000000,80000 old: write-back new: write-combining
mtrr: type mismatch for b0000000,40000 old: write-back new: write-combining
mtrr: type mismatch for b0000000,20000 old: write-back new: write-combining
mtrr: type mismatch for b0000000,10000 old: write-back new: write-combining
mtrr: type mismatch for b0000000,8000 old: write-back new: write-combining
mtrr: type mismatch for b0000000,4000 old: write-back new: write-combining
mtrr: type mismatch for b0000000,2000 old: write-back new: write-combining
mtrr: type mismatch for b0000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90021300000, using 3072k, total 3072k
fb1: VESA VGA frame buffer device
init: failsafe main process (731) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (845) terminated with status 1
type=1400 audit(1396508696.682:8): apparmor="STATUS" operation="profile_load" parent=860 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=868 comm="apparmor_parser"
type=1400 audit(1396508696.682:9): apparmor="STATUS" operation="profile_load" parent=860 profile="unconfined" name="/usr/sbin/cupsd" pid=868 comm="apparmor_parser"
type=1400 audit(1396508696.682:10): apparmor="STATUS" operation="profile_replace" parent=860 profile="unconfined" name="/usr/sbin/cupsd" pid=868 comm="apparmor_parser"
audit_printk_skb: 72 callbacks suppressed
type=1400 audit(1396508697.066:35): apparmor="STATUS" operation="profile_replace" parent=914 profile="unconfined" name="pxgsettings" pid=925 comm="apparmor_parser"
type=1400 audit(1396508697.066:36): apparmor="STATUS" operation="profile_replace" parent=914 profile="unconfined" name="sanitized_helper" pid=925 comm="apparmor_parser"
type=1400 audit(1396508697.066:37): apparmor="STATUS" operation="profile_replace" parent=914 profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=925 comm="apparmor_parser"
type=1400 audit(1396508697.066:38): apparmor="STATUS" operation="profile_load" parent=914 profile="unconfined" name="/usr/sbin/tcpdump" pid=928 comm="apparmor_parser"
type=1400 audit(1396508697.066:39): apparmor="STATUS" operation="profile_load" parent=914 profile="unconfined" name="/usr/bin/evince" pid=923 comm="apparmor_parser"
type=1400 audit(1396508697.066:40): apparmor="STATUS" operation="profile_load" parent=914 profile="unconfined" name="sanitized_helper" pid=923 comm="apparmor_parser"
type=1400 audit(1396508697.066:41): apparmor="STATUS" operation="profile_load" parent=914 profile="unconfined" name="/usr/bin/evince-previewer" pid=923 comm="apparmor_parser"
type=1400 audit(1396508697.066:42): apparmor="STATUS" operation="profile_load" parent=914 profile="unconfined" name="sanitized_helper" pid=923 comm="apparmor_parser"
type=1400 audit(1396508697.066:43): apparmor="STATUS" operation="profile_load" parent=914 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=923 comm="apparmor_parser"
type=1400 audit(1396508697.066:44): apparmor="STATUS" operation="profile_load" parent=914 profile="unconfined" name="sanitized_helper" pid=923 comm="apparmor_parser"
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x210 offMax=0xe2c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.6 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
r8169 0000:01:00.0 eth0: link down
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: anacron main process (1056) killed by TERM signal
wlan0: authenticate with 00:0b:0e:2a:46:44
wlan0: direct probe to 00:0b:0e:2a:46:44 (try 1/3)
wlan0: direct probe to 00:0b:0e:2a:46:44 (try 2/3)
wlan0: direct probe to 00:0b:0e:2a:46:44 (try 3/3)
wlan0: authentication with 00:0b:0e:2a:46:44 timed out
r8169 0000:01:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wlan0: authenticate with 00:0b:0e:29:f5:04
wlan0: send auth to 00:0b:0e:29:f5:04 (try 1/3)
wlan0: authenticated
iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:0b:0e:29:f5:04 (try 1/3)
wlan0: RX AssocResp from 00:0b:0e:29:f5:04 (capab=0x411 status=0 aid=7)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
hidraw: raw HID events driver (C) Jiri Kosina
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
hid-generic 0005:04B4:0033.0001: unknown main item tag 0x0
input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:36/input10
hid-generic 0005:04B4:0033.0001: input,hidraw0: BLUETOOTH HID v6.11 Mouse [Bluetooth Laser Mouse] on 4c:eb:42:1c:a5:f1
wlan0: authenticate with 00:0b:0e:2a:b3:c4
wlan0: send auth to 00:0b:0e:2a:b3:c4 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:0b:0e:2a:b3:c4 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: associate with 00:0b:0e:2a:b3:c4 (try 2/3)
wlan0: associate with 00:0b:0e:2a:b3:c4 (try 3/3)
wlan0: association with 00:0b:0e:2a:b3:c4 timed out
wlan0: authenticate with 00:0b:0e:2a:3d:04
wlan0: send auth to 00:0b:0e:2a:3d:04 (try 1/3)
wlan0: authenticated
wlan0: authenticate with 00:1a:1e:cf:95:31
wlan0: direct probe to 00:1a:1e:cf:95:31 (try 1/3)
wlan0: direct probe to 00:1a:1e:cf:95:31 (try 2/3)
wlan0: direct probe to 00:1a:1e:cf:95:31 (try 3/3)
wlan0: authentication with 00:1a:1e:cf:95:31 timed out
wlan0: authenticate with 00:1a:1e:d0:a0:d1
wlan0: send auth to 00:1a:1e:d0:a0:d1 (try 1/3)
wlan0: authenticated
iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:1a:1e:d0:a0:d1 (try 1/3)
wlan0: RX AssocResp from 00:1a:1e:d0:a0:d1 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: authenticate with 00:1a:1e:d0:9f:81
wlan0: direct probe to 00:1a:1e:d0:9f:81 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: direct probe to 00:1a:1e:d0:9f:81 (try 2/3)
wlan0: direct probe to 00:1a:1e:d0:9f:81 (try 3/3)
wlan0: authentication with 00:1a:1e:d0:9f:81 timed out
wlan0: authenticate with 00:1a:1e:cf:96:a1
wlan0: send auth to 00:1a:1e:cf:96:a1 (try 1/3)
wlan0: send auth to 00:1a:1e:cf:96:a1 (try 2/3)
wlan0: send auth to 00:1a:1e:cf:96:a1 (try 3/3)
wlan0: authenticated
wlan0: authenticate with 00:0b:0e:2a:3d:04
wlan0: send auth to 00:0b:0e:2a:3d:04 (try 1/3)
wlan0: authenticated
iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:0b:0e:2a:3d:04 (try 1/3)
wlan0: RX AssocResp from 00:0b:0e:2a:3d:04 (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: disassociating from 00:0b:0e:2a:3d:04 by local choice (reason=3)
wlan0: deauthenticating from 00:0b:0e:2a:3d:04 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:0b:0e:2a:b3:c4
wlan0: send auth to 00:0b:0e:2a:b3:c4 (try 1/3)
wlan0: authenticated
iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:0b:0e:2a:b3:c4 (try 1/3)
wlan0: associate with 00:0b:0e:2a:b3:c4 (try 2/3)
wlan0: associate with 00:0b:0e:2a:b3:c4 (try 3/3)
wlan0: association with 00:0b:0e:2a:b3:c4 timed out
wlan0: authenticate with 00:0b:0e:29:f5:04
wlan0: send auth to 00:0b:0e:29:f5:04 (try 1/3)
wlan0: authenticated
iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:0b:0e:29:f5:04 (try 1/3)
wlan0: RX AssocResp from 00:0b:0e:29:f5:04 (capab=0x411 status=0 aid=7)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: deauthenticating from 00:0b:0e:29:f5:04 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:0b:0e:2a:46:42
wlan0: send auth to 00:0b:0e:2a:46:42 (try 1/3)
wlan0: authenticated
iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:0b:0e:2a:46:42 (try 1/3)
wlan0: RX AssocResp from 00:0b:0e:2a:46:42 (capab=0x401 status=0 aid=19)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
r8169 0000:01:00.0 eth0: link down
r8169 0000:01:00.0 eth0: link down
r8169 0000:01:00.0 eth0: link up
systemd-hostnamed[3845]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
hid-generic 0005:04B4:0033.0002: unknown main item tag 0x0
input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:40/input11
hid-generic 0005:04B4:0033.0002: input,hidraw0: BLUETOOTH HID v6.11 Mouse [Bluetooth Laser Mouse] on 4c:eb:42:1c:a5:f1
perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
r8169 0000:01:00.0 eth0: link down
r8169 0000:01:00.0 eth0: link up