dmesg - AMD_FX_CHESS_01

Return To AMD_FX_CHESS_01 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-18-generic (buildd@toyol) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #32-Ubuntu SMP Tue Feb 18 21:11:14 UTC 2014 (Ubuntu 3.11.0-18.32-generic 3.11.10.4)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfd9ffff] usable
BIOS-e820: [mem 0x00000000bfda0000-0x00000000bfdd0fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfdd1000-0x00000000bfdfffff] ACPI data
BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-990FXA-UD5/GA-990FXA-UD5, BIOS F12 10/03/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000BFE00000 mask FFFFFFE00000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3070MB, range: 2MB, type UC
total RAM covered: 3070M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 4M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3070MB, range: 2MB, type UC
e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfda0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4cd0-0x000f4cdf] mapped at [ffff8800000f4cd0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000093000] 93000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x23ee00000-0x23effffff]
 [mem 0x23ee00000-0x23effffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23edfffff]
 [mem 0x23c000000-0x23edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
 [mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbfd9ffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0xbfbfffff] page 2M
 [mem 0xbfc00000-0xbfd9ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
 [mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35eb0000-0x36f4ffff]
ACPI: RSDP 00000000000f6bf0 00014 (v00 GBT   )
ACPI: RSDT 00000000bfdd1000 0004C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000bfdd1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000bfdd1100 07997 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000bfda0000 00040
ACPI: MSDM 00000000bfdd8b80 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 00000000bfdd8c00 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000bfdd8c40 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 00000000bfdd8cc0 00740 (v01 GBT             00000000      00000000)
ACPI: MATS 00000000bfdd9400 00034 (v01 GBT             00000000      00000000)
ACPI: TAMG 00000000bfdd9470 00182 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC 00000000bfdd8ac0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000bfdd9600 066BA (v01        MATS RCM 80000001 INTL 20061109)
ACPI: SSDT 00000000bfddfd30 01158 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
Initmem setup node 0 [mem 0x00000000-0x23effffff]
  NODE_DATA [mem 0x23eff9000-0x23effdfff]
 [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236600000-ffff88023e5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x23effffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00098fff]
  node   0: [mem 0x00100000-0xbfd9ffff]
  node   0: [mem 0x100000000-0x23effffff]
On node 0 totalpages: 2092344
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3992 pages, LIFO batch:0
  DMA32 zone: 12215 pages used for memmap
  DMA32 zone: 781728 pages, LIFO batch:31
  Normal zone: 20416 pages used for memmap
  Normal zone: 1306624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfda0000-0xbfdd0fff]
PM: Registered nosave memory: [mem 0xbfdd1000-0xbfdfffff]
PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xbff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88023ec00000 s86720 r8192 d23872 u262144
pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2059628
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ b4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Memory: 8072184K/8369376K available (7154K kernel code, 1083K rwdata, 3312K rodata, 1364K init, 1420K bss, 297192K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3523.248 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7046.49 BogoMIPS (lpj=14092992)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27858 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5
Brought up 6 CPUs
smpboot: Total of 6 processors activated (42278.97 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbfda0000-0xbfdd0fff] (200704 bytes)
regulator-dummy: no parameters
RTC time: 20:46:29, date: 03/20/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0xD2, should be 0xD1 (20130517/tbprint-204)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:6658] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xdf800000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io  0xde00-0xdeff]
pci 0000:01:00.0: reg 0x24: [mem 0xfdd80000-0xfddbffff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aac0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfddfc000-0xfddfffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfdaf8000-0xfdafffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:09.0:   bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:09.0:   bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:03:00.0: reg 0x10: [io  0xef00-0xef07]
pci 0000:03:00.0: reg 0x14: [io  0xee00-0xee03]
pci 0000:03:00.0: reg 0x18: [io  0xed00-0xed07]
pci 0000:03:00.0: reg 0x1c: [io  0xec00-0xec03]
pci 0000:03:00.0: reg 0x20: [io  0xeb00-0xeb0f]
pci 0000:03:00.0: reg 0x24: [mem 0xfd0ff000-0xfd0ff1ff]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:0a.0:   bridge window [mem 0xfd000000-0xfd0fffff]
pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
pci 0000:04:0e.0: reg 0x10: [mem 0xfdcff000-0xfdcff7ff]
pci 0000:04:0e.0: reg 0x14: [io  0xbf00-0xbf7f]
pci 0000:04:0e.0: supports D2
pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io  0xae00-0xaeff]
pci 0000:05:00.0: reg 0x18: [mem 0xfd8ff000-0xfd8fffff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xfd8f8000-0xfd8fbfff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:15.0:   bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfd7f8000-0xfd7fffff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1:   bridge window [io  0x9000-0x9fff]
pci 0000:00:15.1:   bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:15.1:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:07:00.0: reg 0x10: [io  0x8f00-0x8f07]
pci 0000:07:00.0: reg 0x14: [io  0x8e00-0x8e03]
pci 0000:07:00.0: reg 0x18: [io  0x8d00-0x8d07]
pci 0000:07:00.0: reg 0x1c: [io  0x8c00-0x8c03]
pci 0000:07:00.0: reg 0x20: [io  0x8b00-0x8b0f]
pci 0000:07:00.0: reg 0x24: [mem 0xfd5ff000-0xfd5ff1ff]
pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:07:00.0: PME# supported from D3hot
pci 0000:00:15.2: PCI bridge to [bus 07]
pci 0000:00:15.2:   bridge window [io  0x8000-0x8fff]
pci 0000:00:15.2:   bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:15.2:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 08]
pci 0000:00:15.3:   bridge window [io  0x7000-0x7fff]
pci 0000:00:15.3:   bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:00:15.3:   bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfda0000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0220-0x0225] has been reserved
system 00:00: [io  0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:07:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
system 00:01: [io  0x0900-0x091f] has been reserved
system 00:01: [io  0x0228-0x022f] has been reserved
system 00:01: [io  0x040b] has been reserved
system 00:01: [io  0x04d6] has been reserved
system 00:01: [io  0x0c00-0x0c01] has been reserved
system 00:01: [io  0x0c14] has been reserved
system 00:01: [io  0x0c50-0x0c52] has been reserved
system 00:01: [io  0x0c6c-0x0c6d] has been reserved
system 00:01: [io  0x0c6f] has been reserved
system 00:01: [io  0x0cd0-0x0cd1] has been reserved
system 00:01: [io  0x0cd2-0x0cd3] has been reserved
system 00:01: [io  0x0cd4-0x0cdf] has been reserved
system 00:01: [io  0x0800-0x08fe] could not be reserved
system 00:01: [io  0x0a10-0x0a17] has been reserved
system 00:01: [io  0x0b00-0x0b0f] has been reserved
system 00:01: [io  0x0b10-0x0b1f] has been reserved
system 00:01: [io  0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: disabling [mem 0x000d5c00-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x00100000-0xbfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:08: [mem 0xbfda0000-0xbfdfffff] could not be reserved
system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
system 00:08: [mem 0xbfe00000-0xbfefffff] has been reserved
system 00:08: [mem 0xbff00000-0xbfffffff] could not be reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:09.0:   bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:09.0:   bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:0a.0:   bridge window [mem 0xfd000000-0xfd0fffff]
pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:15.0:   bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1:   bridge window [io  0x9000-0x9fff]
pci 0000:00:15.1:   bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:15.1:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:07:00.0: BAR 6: assigned [mem 0xfd400000-0xfd40ffff pref]
pci 0000:00:15.2: PCI bridge to [bus 07]
pci 0000:00:15.2:   bridge window [io  0x8000-0x8fff]
pci 0000:00:15.2:   bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:15.2:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 08]
pci 0000:00:15.3:   bridge window [io  0x7000-0x7fff]
pci 0000:00:15.3:   bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:00:15.3:   bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:02: resource 2 [mem 0xfd100000-0xfd1fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfd0fffff]
pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:04: resource 9 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:07: resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:07: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:08: resource 1 [mem 0xfd300000-0xfd3fffff]
pci_bus 0000:08: resource 2 [mem 0xfd200000-0xfd2fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17024K (ffff880035eb0000 - ffff880036f50000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1395348389.820:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15928
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.11.0-18-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.11.0-18-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.11.0-18-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.11.0-18-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:06:00.0: irq 41 for MSI/MSI-X
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
usb usb10: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
usb usb11: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9d94dc8d073854d044b3fa3652786ac75597c2f5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 6:841:801
rtc_cmos 00:04: setting system clock to 2014-03-20 20:46:30 UTC (1395348390)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1028K (ffff8800016ff000 - ffff880001800000)
Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
systemd-udevd[134]: starting version 204
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 19
ahci 0000:03:00.0: irq 42 for MSI/MSI-X
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 43 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c3c000, 50:e5:49:e0:c2:c8, XID 0c900800 IRQ 43
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfd0ff000 port 0xfd0ff100 irq 42
ata8: SATA max UDMA/133 abar m512@0xfd0ff000 port 0xfd0ff180 irq 42
ahci 0000:07:00.0: irq 44 for MSI/MSI-X
ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xfd5ff000 port 0xfd5ff100 irq 44
ata10: SATA max UDMA/133 abar m512@0xfd5ff000 port 0xfd5ff180 irq 44
firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3523.554 MHz
usb 7-2: new full-speed USB device number 2 using ohci-pci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: ATAPI   iHAS120   6, 7L0F, max UDMA/100
ata2.00: ATA-8: WDC WD5000AAKS-00A7B2, 01.03B01, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/100
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  EXT0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
 sda: sda1
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 4:0:0:0: CD-ROM            ATAPI    iHAS120   6      7L0F PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
 sdb: sdb1 sdb2 sdb3 < sdb5 > sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
firewire_core 0000:04:0e.0: created device fw0: GUID 00656f1cd920cc00, S400
usb 7-2: New USB device found, idVendor=0e6f, idProduct=011f
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-2: Product: Rock Candy Gamepad for Xbox 360
usb 7-2: Manufacturer: Performance Designed Products
usb 7-2: SerialNumber: 069B9BB5
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 4-3: new low-speed USB device number 2 using ohci-pci
usb 4-3: New USB device found, idVendor=045e, idProduct=00b4
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard
usb 4-3: Manufacturer: Microsoft
init: ureadahead main process (220) terminated with status 5
usb 4-4: new low-speed USB device number 3 using ohci-pci
Adding 7811068k swap on /dev/sdb5.  Priority:-1 extents:1 across:7811068k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 4-4: New USB device found, idVendor=046d, idProduct=c05a
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: USB Optical Mouse
usb 4-4: Manufacturer: Logitech
systemd-udevd[345]: starting version 204
lp: driver loaded but no devices found
Switched to clocksource tsc
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,discard
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
wmi: Mapper loaded
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90000c4cb00). heartbeat=60 sec (nowayout=0)
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
microcode: CPU0: patch_level=0x0600081c
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
microcode: CPU0: new patch_level=0x06000822
microcode: CPU1: patch_level=0x0600081c
microcode: CPU1: new patch_level=0x06000822
microcode: CPU2: patch_level=0x0600081c
microcode: CPU2: new patch_level=0x06000822
microcode: CPU3: patch_level=0x0600081c
microcode: CPU4: patch_level=0x0600081c
microcode: CPU5: patch_level=0x0600081c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
hidraw: raw HID events driver (C) Jiri Kosina
type=1400 audit(1395348392.043:2): apparmor="STATUS" operation="profile_load" parent=422 profile="unconfined" name="/sbin/dhclient" pid=426 comm="apparmor_parser"
type=1400 audit(1395348392.043:3): apparmor="STATUS" operation="profile_load" parent=422 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426 comm="apparmor_parser"
type=1400 audit(1395348392.043:4): apparmor="STATUS" operation="profile_load" parent=422 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=426 comm="apparmor_parser"
type=1400 audit(1395348392.043:5): apparmor="STATUS" operation="profile_replace" parent=422 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426 comm="apparmor_parser"
type=1400 audit(1395348392.043:6): apparmor="STATUS" operation="profile_replace" parent=422 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=426 comm="apparmor_parser"
type=1400 audit(1395348392.043:7): apparmor="STATUS" operation="profile_replace" parent=422 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=426 comm="apparmor_parser"
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
input: Generic X-Box pad as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.0/input/input2
usbcore: registered new interface driver xpad
fglrx: module verification failed: signature and/or required key missing - tainting kernel
hda-intel 0000:00:14.2: Using LPIB position fix
[fglrx] Maximum main memory to use for locked dma buffers: 7734 MBytes.
[fglrx]   vendor: 1002 device: 6658 count: 1
[fglrx] ioport: bar 4, base 0xde00, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
hda-intel 0000:00:14.2: Enable sync_write for stable communication
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x11/0x1e
   inputs:
     Front Mic=0x19
     Rear Mic=0x18
     Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input3
hid-generic 0003:045E:00B4.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard] on usb-0000:00:12.0-3/input0
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input5
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
hid-generic 0003:045E:00B4.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard] on usb-0000:00:12.0-3/input1
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input8
hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-4/input0
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
kvm: disabled by bios
hda-intel 0000:01:00.1: Enable sync_write for stable communication
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
vesafb: mode is 1600x900x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011e80000, using 5632k, total 5632k
Console: switching to colour frame buffer device 200x56
fb0: VESA VGA frame buffer device
init: failsafe main process (703) killed by TERM signal
type=1400 audit(1395348395.515:8): apparmor="STATUS" operation="profile_replace" parent=825 profile="unconfined" name="/sbin/dhclient" pid=838 comm="apparmor_parser"
type=1400 audit(1395348395.515:9): apparmor="STATUS" operation="profile_replace" parent=825 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=838 comm="apparmor_parser"
type=1400 audit(1395348395.515:10): apparmor="STATUS" operation="profile_replace" parent=825 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=838 comm="apparmor_parser"
type=1400 audit(1395348395.515:11): apparmor="STATUS" operation="profile_replace" parent=825 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=838 comm="apparmor_parser"
type=1400 audit(1395348395.515:12): apparmor="STATUS" operation="profile_replace" parent=825 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=838 comm="apparmor_parser"
type=1400 audit(1395348395.515:13): apparmor="STATUS" operation="profile_replace" parent=825 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=838 comm="apparmor_parser"
type=1400 audit(1395348395.519:14): apparmor="STATUS" operation="profile_load" parent=825 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=836 comm="apparmor_parser"
type=1400 audit(1395348395.519:15): apparmor="STATUS" operation="profile_load" parent=825 profile="unconfined" name="chromium_browser" pid=836 comm="apparmor_parser"
type=1400 audit(1395348395.519:16): apparmor="STATUS" operation="profile_load" parent=825 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=835 comm="apparmor_parser"
type=1400 audit(1395348395.519:17): apparmor="STATUS" operation="profile_load" parent=825 profile="unconfined" name="chromium_browser" pid=835 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-cups-reload main process (884) terminated with status 1
ppdev: user-space parallel port driver
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:05:00.0 eth0: link down
fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1126
[fglrx] Firegl kernel thread PID: 1127
[fglrx] Firegl kernel thread PID: 1128
[fglrx] IRQ 46 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f778000, size:4000 
[fglrx] Reserved FB block: Unshared offset:f77c000, size:484000 
[fglrx] Reserved FB block: Unshared offset:fc00000, size:100000 
[fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000 
r8169 0000:05:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 7235 at /build/buildd/linux-3.11.0/drivers/usb/core/urb.c:327 usb_submit_urb+0x3be/0x3d0()
URB ffff88022efc7600 submitted while active
Modules linked in: parport_pc ppdev bnep rfcomm bluetooth binfmt_misc vesafb(F) snd_hda_codec_hdmi kvm joydev hid_generic mxm_wmi crct10dif_pclmul snd_hda_codec_realtek crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec fglrx(POF) snd_hwdep aesni_intel xpad aes_x86_64 lrw gf128mul glue_helper snd_pcm ablk_helper cryptd ff_memless usbhid hid snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi microcode edac_core snd_seq edac_mce_amd serio_raw k10temp fam15h_power snd_seq_device snd_timer snd amd_iommu_v2 soundcore sp5100_tco wmi i2c_piix4 mac_hid lp parport firewire_ohci r8169 firewire_core mii crc_itu_t ahci libahci
CPU: 0 PID: 7235 Comm: mupen64plus Tainted: PF          O 3.11.0-18-generic #32-Ubuntu
Hardware name: Gigabyte Technology Co., Ltd. GA-990FXA-UD5/GA-990FXA-UD5, BIOS F12 10/03/2013
 0000000000000009 ffff880145321c70 ffffffff816e8571 ffff880145321cb8
 ffff880145321ca8 ffffffff81061e2d ffff880145321d70 ffff880233251308
 ffff880233251000 ffff880145321d70 000000000000ffff ffff880145321d08
Call Trace:
 [] dump_stack+0x45/0x56
 [] warn_slowpath_common+0x7d/0xa0
 [] warn_slowpath_fmt+0x4c/0x50
 [] ? _raw_spin_lock_irqsave+0x23/0x30
 [] usb_submit_urb+0x3be/0x3d0
 [] xpad_play_effect+0x161/0x200 [xpad]
 [] ml_play_effects+0xf8/0x5f0 [ff_memless]
 [] ml_ff_playback+0x8f/0x100 [ff_memless]
 [] ? _raw_spin_lock_irq+0x15/0x20
 [] input_ff_event+0x70/0xa0
 [] input_handle_event+0x8e/0x530
 [] input_inject_event+0x94/0xb0
 [] evdev_write+0x14e/0x210
 [] vfs_write+0xbd/0x1e0
 [] ? vfs_read+0x9e/0x170
 [] SyS_write+0x49/0xa0
 [] system_call_fastpath+0x1a/0x1f
---[ end trace 0bc227d0a17a950b ]---
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
ata2: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
ata2: irq_stat 0x00400000, PHY RDY changed
ata2: SError: { RecovComm Persist PHYRdyChg 10B8B }
ata2: hard resetting link
ata5: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
ata5: irq_stat 0x00400000, PHY RDY changed
ata5: SError: { Persist PHYRdyChg 10B8B }
ata5: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata2: EH complete
ata5: EH complete
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.

Return To AMD_FX_CHESS_01 System Information