dmesg - test_7_zip
Initializing cgroup subsys cpuset
Linux version 2.6.33-nh3 (naguirre@z820.ow) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP PREEMPT RT Mon Mar 17 12:03:24 CET 2014
Command line: ro root=/dev/sda1 log_buf_len=131072 idle=halt
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cb428000 (usable)
BIOS-e820: 00000000cb428000 - 00000000cb83a000 (reserved)
BIOS-e820: 00000000cb83a000 - 00000000cba11000 (ACPI NVS)
BIOS-e820: 00000000cba11000 - 00000000cbb33000 (reserved)
BIOS-e820: 00000000cbb33000 - 00000000cc000000 (ACPI NVS)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000830000000 (usable)
NX (Execute Disable) protection: active
DMI 2.7 present.
No AGP bridge found
last_pfn = 0x830000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000CC000000 mask 3FFFFC000000 uncachable
1 base 0000D0000000 mask 3FFFF0000000 uncachable
2 base 0000E0000000 mask 3FFFE0000000 uncachable
3 base 000830000000 mask 3FFFF0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcb428 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cb428000
0000000000 - 00cb400000 page 2M
00cb400000 - 00cb428000 page 4k
kernel direct mapping tables up to cb428000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000830000000
0100000000 - 0830000000 page 2M
kernel direct mapping tables up to 830000000 @ c000-2e000
RAMDISK: 37d3f000 - 37fef032
ACPI: RSDP 00000000000f9810 00024 (v02 HPQOEM)
ACPI: XSDT 00000000cb75c088 00094 (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: FACP 00000000cb7638f0 0010C (v05 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20091214/tbfadt-288)
ACPI: DSDT 00000000cb75c1b0 07740 (v02 HPQOEM SLIC-WKS 00000350 INTL 20051117)
ACPI: FACS 00000000cba08080 00040
ACPI: APIC 00000000cb763a00 00144 (v03 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: FPDT 00000000cb763b48 00044 (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: MCFG 00000000cb763b90 0003C (v01 HPQOEM OEMMCFG. 01072009 MSFT 00000097)
ACPI: SRAT 00000000cb763bd0 003B0 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
ACPI: SLIT 00000000cb763f80 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 00000000cb763fb0 00038 (v01 HPQOEM SLIC-WKS 01072009 AMI. 00000005)
ACPI: SSDT 00000000cb763fe8 05913 (v01 COMPAQ WMI 00000001 MSFT 03000001)
ACPI: SSDT 00000000cb769900 02A71 (v02 HPQOEM CpuDef 00004000 INTL 20051117)
ACPI: SSDT 00000000cb76c378 CD380 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: ASF! 00000000cb8396f8 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: TCPA 00000000cb8397a0 00032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
ACPI: IFEU 00000000cb8397d8 00042 (v01 HPQOEM SLIC-WKS 01072009 00000000)
ACPI: DMAR 00000000cb839820 000E8 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x2c -> Node 1
SRAT: PXM 1 -> APIC 0x2e -> Node 1
SRAT: Node 0 PXM 0 0-d0000000
SRAT: Node 0 PXM 0 100000000-430000000
SRAT: Node 1 PXM 1 430000000-830000000
NUMA: Allocated memnodemap from 29000 - 29140
NUMA: Using 28 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000430000000
NODE_DATA [0000000000029140 - 000000000003513f]
bootmap [0000000000100000 - 0000000000185fff] pages 86
(10 early reservations) ==> bootmem [0000000000 - 0430000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00017f99f0] TEXT DATA BSS ==> [0001000000 - 00017f99f0]
#2 [0037d3f000 - 0037fef032] RAMDISK ==> [0037d3f000 - 0037fef032]
#3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#4 [00017fa000 - 00017fa1f1] BRK ==> [00017fa000 - 00017fa1f1]
#5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000029000] PGTABLE ==> [000000c000 - 0000029000]
#8 [0000003000 - 0000003030] ACPI SLIT ==> [0000003000 - 0000003030]
#9 [0000029000 - 0000029140] MEMNODEMAP ==> [0000029000 - 0000029140]
Bootmem setup node 1 0000000430000000-0000000830000000
NODE_DATA [0000000430000000 - 000000043000bfff]
bootmap [000000043000c000 - 000000043008bfff] pages 80
(10 early reservations) ==> bootmem [0430000000 - 0830000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0001000000 - 00017f99f0] TEXT DATA BSS
#2 [0037d3f000 - 0037fef032] RAMDISK
#3 [000009f800 - 0000100000] BIOS reserved
#4 [00017fa000 - 00017fa1f1] BRK
#5 [0000001000 - 0000003000] TRAMPOLINE
#6 [0000008000 - 000000c000] PGTABLE
#7 [000000c000 - 0000029000] PGTABLE
#8 [0000003000 - 0000003030] ACPI SLIT
#9 [0000029000 - 0000029140] MEMNODEMAP
[ffffea000ea80000-ffffea000ebfffff] potential offnode page_structs
[ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880028600000-ffff8800367fffff] on node 0
[ffffea000ec00000-ffffea001cbfffff] PMD -> [ffff880430200000-ffff88043e1fffff] on node 1
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00830000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000cb428
0: 0x00100000 -> 0x00430000
1: 0x00430000 -> 0x00830000
On node 0 totalpages: 4174791
DMA zone: 56 pages used for memmap
DMA zone: 132 pages reserved
DMA zone: 3811 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 814176 pages, LIFO batch:31
Normal zone: 45696 pages used for memmap
Normal zone: 3296640 pages, LIFO batch:31
On node 1 totalpages: 4194304
Normal zone: 57344 pages used for memmap
Normal zone: 4136960 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
Allocating PCI resources starting at cc000000 (gap: cc000000:24000000)
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:2
PERCPU: Embedded 164 pages/cpu @ffff880036800000 s640984 r8192 d22568 u1048576
pcpu-alloc: s640984 r8192 d22568 u1048576 alloc=1*2097152
pcpu-alloc: [0] 00 01 [0] 02 03 [0] 04 05 [0] 06 07
pcpu-alloc: [1] 08 09 [1] 10 11 [1] 12 13 [1] 14 15
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 8251587
Policy zone: Normal
Kernel command line: ro root=/dev/sda1 log_buf_len=131072 idle=halt
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 32927000k/34340864k available (2880k kernel code, 864484k absent, 549380k reserved, 2466k data, 1708k init)
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Experimental preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2892.742 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5785.48 BogoMIPS (lpj=11570968)
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8 CMCI:9 CMCI:10 CMCI:11 CMCI:12 CMCI:13 CMCI:14 CMCI:15 CMCI:16 CMCI:17 CMCI:18 CMCI:19
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 12233 entries in 48 pages
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 07
Booting Node 0 Processor 1 APIC 0x2
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 0 Processor 2 APIC 0x4
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 0 Processor 3 APIC 0x6
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 0 Processor 4 APIC 0x8
CPU 4 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 0 Processor 5 APIC 0xa
CPU 5 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 0 Processor 6 APIC 0xc
CPU 6 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 0 Processor 7 APIC 0xe
CPU 7 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 1 Processor 8 APIC 0x20
CPU 8 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8 CMCI:9 CMCI:10 CMCI:11 CMCI:12 CMCI:13 CMCI:14 CMCI:15 CMCI:16 CMCI:17 CMCI:18 CMCI:19
Booting Node 1 Processor 9 APIC 0x22
CPU 9 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 1 Processor 10 APIC 0x24
CPU 10 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 1 Processor 11 APIC 0x26
CPU 11 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 1 Processor 12 APIC 0x28
CPU 12 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 1 Processor 13 APIC 0x2a
CPU 13 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 1 Processor 14 APIC 0x2c
CPU 14 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Booting Node 1 Processor 15 APIC 0x2e
CPU 15 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
Brought up 16 CPUs
Total of 16 processors activated (92574.38 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xefffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x380000000000-0x38007fffffff] (ignored)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.4: reg 10: [mem 0xef72a000-0xef72afff]
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:19.0: reg 10: [mem 0xef700000-0xef71ffff]
pci 0000:00:19.0: reg 14: [mem 0xef72d000-0xef72dfff]
pci 0000:00:19.0: reg 18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xef72f000-0xef72f3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xef720000-0xef723fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xef72e000-0xef72e3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 14: [io 0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 18: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 1c: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xef72c000-0xef72c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xef72b000-0xef72b0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 14: [mem 0xef440000-0xef44ffff 64bit]
pci 0000:02:00.0: reg 1c: [mem 0xef400000-0xef43ffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xef300000-0xef3fffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 02-02]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xef300000-0xef4fffff]
pci 0000:00:01.1: PCI bridge to [bus 03-03]
pci 0000:00:02.0: PCI bridge to [bus 06-06]
pci 0000:05:00.0: reg 10: [mem 0xee000000-0xeeffffff]
pci 0000:05:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:05:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:05:00.0: reg 24: [io 0xb000-0xb07f]
pci 0000:05:00.0: reg 30: [mem 0xef000000-0xef07ffff pref]
pci 0000:05:00.1: reg 10: [mem 0xef080000-0xef083fff]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xe2800000-0xe2803fff 64bit pref]
pci 0000:04:00.0: reg 18: [mem 0xe2400000-0xe27fffff 64bit pref]
pci 0000:04:00.0: reg 20: [io 0xc000-0xc0ff]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:00:11.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:11.0: bridge window [mem 0xe2400000-0xe28fffff 64bit pref]
pci 0000:01:00.0: reg 10: [mem 0xef600000-0xef61ffff]
pci 0000:01:00.0: reg 18: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 1c: [mem 0xef620000-0xef623fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xef600000-0xef6fffff]
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:08:00.0: reg 10: [mem 0xef500000-0xef50ffff 64bit]
pci 0000:08:00.0: reg 18: [mem 0xef510000-0xef511fff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 08-08]
pci 0000:00:1c.6: bridge window [mem 0xef500000-0xef5fffff]
pci 0000:09:00.0: reg 10: [mem 0xef220000-0xef23ffff 64bit]
pci 0000:09:00.0: reg 18: [mem 0xef1c0000-0xef1fffff 64bit]
pci 0000:09:00.0: reg 20: [io 0xa040-0xa07f]
pci 0000:09:00.0: reg 30: [mem 0xef180000-0xef1bffff pref]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:09:00.1: reg 10: [mem 0xef200000-0xef21ffff 64bit]
pci 0000:09:00.1: reg 18: [mem 0xef140000-0xef17ffff 64bit]
pci 0000:09:00.1: reg 20: [io 0xa000-0xa03f]
pci 0000:09:00.1: reg 30: [mem 0xef100000-0xef13ffff pref]
pci 0000:09:00.1: PME# supported from D0 D3hot
pci 0000:09:00.1: PME# disabled
pci 0000:09:01.0: reg 10: [mem 0xef240000-0xef240fff]
pci 0000:09:01.0: supports D1 D2
pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot
pci 0000:09:01.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xef100000-0xef2fffff]
pci_bus 0000:00: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NP1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
pci_root PNP0A08:01: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:01: host bridge window [io 0x0000-0x03af] (ignored)
pci_root PNP0A08:01: host bridge window [io 0x03e0-0x0cf7] (ignored)
pci_root PNP0A08:01: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:01: host bridge window [mem 0xf8000000-0xfbffffff] (ignored)
pci_root PNP0A08:01: host bridge window [mem 0x380600000000-0x38067fffffff] (ignored)
pci 0000:40:02.0: PME# supported from D0 D3hot D3cold
pci 0000:40:02.0: PME# disabled
pci 0000:40:03.0: PME# supported from D0 D3hot D3cold
pci 0000:40:03.0: PME# disabled
pci 0000:40:05.4: reg 10: [mem 0xfbf02000-0xfbf02fff]
pci 0000:40:02.0: PCI bridge to [bus 41-41]
pci 0000:40:03.0: PCI bridge to [bus 42-42]
pci_bus 0000:40: on NUMA node 1 (pxm 1)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.NPE3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:02: [mem 0xef724000-0xef725fff] has been reserved
system 00:03: [io 0x0620-0x063f] has been reserved
system 00:03: [io 0x0610-0x061f] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:0c: [io 0x0400-0x0453] has been reserved
system 00:0c: [io 0x0458-0x047f] has been reserved
system 00:0c: [io 0x1180-0x119f] has been reserved
system 00:0c: [io 0x0500-0x057f] has been reserved
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0c: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [io 0x0454-0x0457] has been reserved
system 00:10: [mem 0xfbf00000-0xfbf01fff] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 02-02]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xef300000-0xef4fffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:01.1: PCI bridge to [bus 03-03]
pci 0000:00:01.1: bridge window [io disabled]
pci 0000:00:01.1: bridge window [mem disabled]
pci 0000:00:01.1: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 06-06]
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [mem disabled]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:00:11.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:11.0: bridge window [mem disabled]
pci 0000:00:11.0: bridge window [mem 0xe2400000-0xe28fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xef600000-0xef6fffff]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 08-08]
pci 0000:00:1c.6: bridge window [io disabled]
pci 0000:00:1c.6: bridge window [mem 0xef500000-0xef5fffff]
pci 0000:00:1c.6: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 09-09]
pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xef100000-0xef2fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.5: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:40:02.0: PCI bridge to [bus 41-41]
pci 0000:40:02.0: bridge window [io disabled]
pci 0000:40:02.0: bridge window [mem disabled]
pci 0000:40:02.0: bridge window [mem pref disabled]
pci 0000:40:03.0: PCI bridge to [bus 42-42]
pci 0000:40:03.0: bridge window [io disabled]
pci 0000:40:03.0: bridge window [mem disabled]
pci 0000:40:03.0: bridge window [mem pref disabled]
pci 0000:40:02.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:40:02.0: setting latency timer to 64
pci 0000:40:03.0: PCI INT A -> GSI 64 (level, low) -> IRQ 64
pci 0000:40:03.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xef300000-0xef4fffff]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xee000000-0xef0fffff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 2 [mem 0xe2400000-0xe28fffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xef600000-0xef6fffff]
pci_bus 0000:08: resource 1 [mem 0xef500000-0xef5fffff]
pci_bus 0000:09: resource 0 [io 0xa000-0xafff]
pci_bus 0000:09: resource 1 [mem 0xef100000-0xef2fffff]
pci_bus 0000:09: resource 3 [io 0x0000-0xffff]
pci_bus 0000:09: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:40: resource 0 [io 0x0000-0xffff]
pci_bus 0000:40: resource 1 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 16384 (order: 9, 2621440 bytes)
UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes)
NET: Registered protocol family 1
pci 0000:05:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2752k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
audit: initializing netlink socket (disabled)
type=2000 audit(1395222798.952:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 72 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
pcieport 0000:00:01.1: irq 73 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 74 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 75 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
pcieport 0000:00:11.0: irq 76 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 77 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 78 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 79 for MSI/MSI-X
pcieport 0000:40:02.0: setting latency timer to 64
pcieport 0000:40:02.0: irq 80 for MSI/MSI-X
pcieport 0000:40:03.0: setting latency timer to 64
pcieport 0000:40:03.0: irq 81 for MSI/MSI-X
input: Power Button as /class/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /class/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-2 state
Linux agpgart interface v0.103
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
*****************************************************************************
* *
* REMINDER, the following debugging options are turned on in your .config: *
* *
* CONFIG_IRQSOFF_TRACER *
* CONFIG_PREEMPT_TRACER *
* CONFIG_INTERRUPT_OFF_HIST *
* CONFIG_PREEMPT_OFF_HIST *
* *
* they may increase runtime overhead and latencies. *
* *
*****************************************************************************
Freeing unused kernel memory: 1708k freed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xef72f000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33-nh3 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xef72e000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33-nh3 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 82 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xef72c000 port 0xef72c100 irq 82
ata2: SATA max UDMA/133 abar m2048@0xef72c000 port 0xef72c180 irq 82
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: WDC WD3200AAKX-00ERMA0, 15.01H15, max UDMA/133
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ATAPI: hp DVD-RAM SW820, UH06, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM hp DVD-RAM SW820 UH06 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKX-0 15.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
mpt2sas version 03.100.03.00 loaded
scsi6 : Fusion MPT SAS Host
mpt2sas 0000:02:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
mpt2sas 0000:02:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32931488 kB)
mpt2sas 0000:02:00.0: irq 83 for MSI/MSI-X
mpt2sas0: PCI-MSI-X enabled: IRQ 83
mpt2sas0: iomem(0xef440000), mapped(0xffffc9000c6e0000), size(65536)
mpt2sas0: ioport(0xd000), size(256)
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new low speed USB device using ehci_hcd and address 3
usb 1-1.3: New USB device found, idVendor=04d9, idProduct=1603
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Keyboard
usb 1-1.3: Manufacturer:
mpt2sas0: Allocated physical memory: size(835 kB)
mpt2sas0: Current Controller Queue Depth(337), Max Controller Queue Depth(3072)
mpt2sas0: Scatter Gather Elements per IO(128)
input: USB Keyboard as /class/input/input2
generic-usb 0003:04D9:1603.0001: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1a.0-1.3/input0
input: USB Keyboard as /class/input/input3
generic-usb 0003:04D9:1603.0002: input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1a.0-1.3/input1
usb 2-1.6: new high speed USB device using ehci_hcd and address 3
usb 2-1.6: New USB device found, idVendor=0b95, idProduct=7720
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: AX88x72A
usb 2-1.6: Manufacturer: ASIX Elec. Corp.
usb 2-1.6: SerialNumber: 0DA12E
mpt2sas0: LSISAS2308: FWVersion(12.00.02.00), ChipRevision(0x05), BiosVersion(07.23.02.00)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x5001438025e430fb), phys(8)
mpt2sas0: port enable: SUCCESS
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
EXT3-fs (sda1): recovery required on readonly filesystem
EXT3-fs (sda1): write access will be enabled during recovery
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): recovery complete
EXT3-fs (sda1): mounted filesystem with ordered data mode
e1000e: Intel(R) PRO/1000 Network Driver - 3.0.4-NAPI
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 84 for MSI/MSI-X
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) d8:9d:67:f3:17:93
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
e1000e 0000:01:00.0: Disabling ASPM L0s L1
e1000e 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:01:00.0: setting latency timer to 64
e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:01:00.0: irq 85 for MSI/MSI-X
e1000e 0000:01:00.0: irq 86 for MSI/MSI-X
e1000e 0000:01:00.0: irq 87 for MSI/MSI-X
e1000e 0000:01:00.0: eth1: (PCI Express:2.5GT/s:Width x1) d8:9d:67:f3:17:92
e1000e 0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:09:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000: 0000:09:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:12:79:9e:a0:ce
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:09:00.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
e1000: 0000:09:00.1: e1000_probe: (PCI:33MHz:32-bit) 00:12:79:9e:a0:cf
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
EXT3-fs (sda1): using internal journal
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
microcode: Microcode Update Driver: v2.00 removed.
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:01:00.0: eth1: 10/100 speed: disabling TSO
e1000e 0000:00:19.0: irq 84 for MSI/MSI-X
e1000e 0000:00:19.0: irq 84 for MSI/MSI-X
e1000e: eth2 NIC Link is Down
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
comedi: module is from the staging directory, the quality is unknown, you have been warned.
comedi: version 0.7.76 -
8255: module is from the staging directory, the quality is unknown, you have been warned.
amplc_dio200: module is from the staging directory, the quality is unknown, you have been warned.
hrtimer: interrupt took 2442 ns