dmesg - nr_request_boot1024
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.6 (root@mcowork.contilex.local) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9) ) #1 SMP Fri Mar 7 08:58:38 BRT 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bbc4ffff] usable
BIOS-e820: [mem 0x00000000bbc50000-0x00000000bbc94fff] ACPI NVS
BIOS-e820: [mem 0x00000000bbc95000-0x00000000bbd08fff] reserved
BIOS-e820: [mem 0x00000000bbd09000-0x00000000bbd0afff] usable
BIOS-e820: [mem 0x00000000bbd0b000-0x00000000bbe10fff] reserved
BIOS-e820: [mem 0x00000000bbe11000-0x00000000bbe11fff] usable
BIOS-e820: [mem 0x00000000bbe12000-0x00000000bbe12fff] ACPI NVS
BIOS-e820: [mem 0x00000000bbe13000-0x00000000bbe1afff] ACPI data
BIOS-e820: [mem 0x00000000bbe1b000-0x00000000bbe1bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bbe1c000-0x00000000bbe1dfff] ACPI data
BIOS-e820: [mem 0x00000000bbe1e000-0x00000000bbe25fff] ACPI NVS
BIOS-e820: [mem 0x00000000bbe26000-0x00000000bbe46fff] reserved
BIOS-e820: [mem 0x00000000bbe47000-0x00000000bbe89fff] ACPI NVS
BIOS-e820: [mem 0x00000000bbe8a000-0x00000000bbffffff] usable
BIOS-e820: [mem 0x00000000bc000000-0x00000000bf7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: /DH55TC, BIOS TCIBX10H.86A.0048.2011.1206.1342 12/06/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
total RAM covered: 8192M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 1GB, type WB
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fccf0-0x000fccff] mapped at [ffff8800000fccf0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01f98000, 0x01f98fff] PGTABLE
BRK [0x01f99000, 0x01f99fff] PGTABLE
BRK [0x01f9a000, 0x01f9afff] PGTABLE
init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[mem 0x23fe00000-0x23fffffff] page 2M
BRK [0x01f9b000, 0x01f9bfff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[mem 0x23c000000-0x23fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbbc4ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbbbfffff] page 2M
[mem 0xbbc00000-0xbbc4ffff] page 4k
init_memory_mapping: [mem 0xbbd09000-0xbbd0afff]
[mem 0xbbd09000-0xbbd0afff] page 4k
init_memory_mapping: [mem 0xbbe11000-0xbbe11fff]
[mem 0xbbe11000-0xbbe11fff] page 4k
BRK [0x01f9c000, 0x01f9cfff] PGTABLE
init_memory_mapping: [mem 0xbbe8a000-0xbbffffff]
[mem 0xbbe8a000-0xbbffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01f9d000, 0x01f9dfff] PGTABLE
RAMDISK: [mem 0x3617c000-0x370b5fff]
ACPI: RSDP 00000000000f0410 000024 (v02 INTEL)
ACPI: XSDT 00000000bbe1ce18 00005C (v01 INTEL DH55TC 01072009 MSFT 00010013)
ACPI: FACP 00000000bbe1ad98 0000F4 (v04 INTEL DH55TC 01072009 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20131115/tbfadt-395)
ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xBBE1BF40/0x00000000BBE1BE40, using 32 (20131115/tbfadt-522)
ACPI: DSDT 00000000bbe13018 006B90 (v01 INTEL DH55TC 00000000 INTL 20051117)
ACPI: FACS 00000000bbe1bf40 000040
ACPI: APIC 00000000bbe1af18 0000CC (v02 INTEL DH55TC 01072009 MSFT 00010013)
ACPI: SSDT 00000000bbe1ac18 000102 (v01 INTEL DH55TC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bbe1df18 00003C (v01 INTEL DH55TC 01072009 MSFT 00000097)
ACPI: HPET 00000000bbe1de98 000038 (v01 INTEL DH55TC 01072009 AMI. 00000003)
ACPI: ASF! 00000000bbe1cc18 0000A0 (v32 INTEL DH55TC 00000001 TFSM 000F4240)
ACPI: DMAR 00000000bbe1cb18 000068 (v01 INTEL DH55TC 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x00000000-0x23fffffff]
NODE_DATA [mem 0x23fff5000-0x23fff9fff]
Reserving 128MB of memory at 736MB for crashkernel (System RAM: 8125MB)
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00099fff]
node 0: [mem 0x00100000-0xbbc4ffff]
node 0: [mem 0xbbd09000-0xbbd0afff]
node 0: [mem 0xbbe11000-0xbbe11fff]
node 0: [mem 0xbbe8a000-0xbbffffff]
node 0: [mem 0x100000000-0x23fffffff]
On node 0 totalpages: 2080098
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 11960 pages used for memmap
DMA32 zone: 765385 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 12 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbbc50000-0xbbc94fff]
PM: Registered nosave memory: [mem 0xbbc95000-0xbbd08fff]
PM: Registered nosave memory: [mem 0xbbd0b000-0xbbe10fff]
PM: Registered nosave memory: [mem 0xbbe12000-0xbbe12fff]
PM: Registered nosave memory: [mem 0xbbe13000-0xbbe1afff]
PM: Registered nosave memory: [mem 0xbbe1b000-0xbbe1bfff]
PM: Registered nosave memory: [mem 0xbbe1c000-0xbbe1dfff]
PM: Registered nosave memory: [mem 0xbbe1e000-0xbbe25fff]
PM: Registered nosave memory: [mem 0xbbe26000-0xbbe46fff]
PM: Registered nosave memory: [mem 0xbbe47000-0xbbe89fff]
PM: Registered nosave memory: [mem 0xbc000000-0xbf7fffff]
PM: Registered nosave memory: [mem 0xbf800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf800000-0xdfffffff] available for PCI devices
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s81984 r8192 d24512 u131072
pcpu-alloc: s81984 r8192 d24512 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047573
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
BIOS vendor: Intel Corp.; Ver: TCIBX10H.86A.0048.2011.1206.1342; Product Version:
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.6 #1
Hardware name: /DH55TC, BIOS TCIBX10H.86A.0048.2011.1206.1342 12/06/2011
000000000000000b ffffffff81c01e20 ffffffff8178af51 ffffffff81c01e68
ffffffff81c01e58 ffffffff8104e6fd ffffffff81f9700c ffffffff8189e02c
00000000fed90000 0000000000000000 0000000001598fb8 ffffffff81c01eb8
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt_taint+0x44/0x50
[] ? early_ioremap+0x13/0x15
[] ? __acpi_map_table+0x13/0x18
[] warn_invalid_dmar+0x7e/0x90
[] check_zero_address+0xd6/0xf4
[] detect_intel_iommu+0x15/0xae
[] pci_iommu_alloc+0x4a/0x6c
[] mem_init+0x17/0x9c
[] start_kernel+0x1fc/0x41e
[] ? repair_env_string+0x5c/0x5c
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0xf1/0xf4
---[ end trace f8ed937106000c62 ]---
Memory: 7958440K/8320392K available (7814K kernel code, 1111K rwdata, 3388K rodata, 1248K init, 1280K bss, 361952K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
NR_IRQS:16640 nr_irqs:808 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2659.948 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.89 BogoMIPS (lpj=10639792)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (ffffffff81e4f000 - ffffffff81e56000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 29351 entries in 115 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU: failed to map dmar0
dmar: parse DMAR table failure.
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21279.58 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbbc50000-0xbbc94fff] (282624 bytes)
PM: Registering ACPI NVS region [mem 0xbbe12000-0xbbe12fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbbe1b000-0xbbe1bfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbbe1e000-0xbbe25fff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0xbbe47000-0xbbe89fff] (274432 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bbe12c18 00038C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00038C (v01 AMI IST 00000001 MSFT 03000001)
ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20131115/tbprint-214)
ACPI: SSDT 00000000bbe1bd18 000084 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000084 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb12a000-0xfb12a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.2: [8086:3b66] type 00 class 0x010185
pci 0000:00:16.2: reg 0x10: [io 0xf0f0-0xf0f7]
pci 0000:00:16.2: reg 0x14: [io 0xf0e0-0xf0e3]
pci 0000:00:16.2: reg 0x18: [io 0xf0d0-0xf0d7]
pci 0000:00:16.2: reg 0x1c: [io 0xf0c0-0xf0c3]
pci 0000:00:16.2: reg 0x20: [io 0xf0b0-0xf0bf]
pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
pci 0000:00:16.3: reg 0x14: [mem 0xfb129000-0xfb129fff]
pci 0000:00:19.0: [8086:10f0] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb128000-0xfb128fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb127000-0xfb1273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb120000-0xfb123fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb126000-0xfb1263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb125000-0xfb1257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb124000-0xfb1240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:0421] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb01ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbbc50000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbbd0b000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbbe12000-0xbbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: [io 0x0400-0x047f] could not be reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0xc0000000-0xffffffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15592K (ffff88003617c000 - ffff8800370b6000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb7c50000-0xbbc50000] (64MB) mapped at [ffff8800b7c50000-ffff8800bbc4ffff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1395312205.452:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
msgmni has been set to 15574
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90005400000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
scsi0 : ata_generic
scsi1 : ata_generic
ata1: PATA max UDMA/100 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 18
ata2: PATA max UDMA/100 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb127000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.6 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb126000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.6 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: d686df8a5bf53379c7231ca8231fe8cb6f68252b'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos 00:03: setting system clock to 2014-03-20 10:43:26 UTC (1395312206)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-1: new high-speed USB device number 2 using ehci-pci
Freeing unused kernel memory: 1248K (ffffffff81d17000 - ffffffff81e4f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 368K (ffff8800017a4000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[121]: starting version 204
pps_core: module verification failed: signature and/or required key missing - tainting kernel
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125100 irq 46
ata4: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125180 irq 46
ata5: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125200 irq 46
ata6: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125280 irq 46
ata7: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125300 irq 46
ata8: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125380 irq 46
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:27:0e:0a:ae:eb
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-9: KINGSTON SV200S364G, E120506a, max UDMA/100
ata3.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA KINGSTON SV200S3 E120 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: configured for UDMA/100
sda: sda1 sda2
ata4.00: ATA-8: WDC WD10EARS-00Z5B1, 80.00A80, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sd 2:0:0:0: [sda] Attached SCSI disk
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD10EARS-00Z 80.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1AG0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg3 type 5
sdc: sdc1 sdc2 sdc3
sd 4:0:0:0: [sdc] Attached SCSI disk
usb 1-1.1: new low-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2659.999 MHz
sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 >
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 1-1.1: New USB device found, idVendor=051d, idProduct=0002
usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.1: Product: Back-UPS ES 600G FW:883.K1a.D USB FW:K1a
usb 1-1.1: Manufacturer: APC
usb 1-1.1: SerialNumber: 4B1118P47150
hidraw: raw HID events driver (C) Jiri Kosina
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.4: new full-speed USB device number 4 using ehci-pci
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1.4: New USB device found, idVendor=05a9, idProduct=a511
usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
random: init urandom read with 111 bits of entropy available
usb 1-1.5: new low-speed USB device number 5 using ehci-pci
init: ureadahead main process (192) terminated with status 5
random: nonblocking pool is initialized
usb 1-1.5: New USB device found, idVendor=1c4f, idProduct=0002
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: USB Keykoard
usb 1-1.5: Manufacturer: USB
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
usb 1-1.6: new low-speed USB device number 6 using ehci-pci
systemd-udevd[321]: starting version 204
lp: driver loaded but no devices found
usb 1-1.6: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: USB Optical Mouse
usb 1-1.6: Manufacturer: PixArt
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.AY34 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
[drm] Initialized drm 1.1.0 20060810
microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x5
platform microcode: Direct firmware load failed with error -2
platform microcode: Falling back to user helper
type=1400 audit(1395312207.941:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=383 comm="apparmor_parser"
type=1400 audit(1395312207.941:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=383 comm="apparmor_parser"
type=1400 audit(1395312207.941:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=383 comm="apparmor_parser"
type=1400 audit(1395312207.941:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=383 comm="apparmor_parser"
type=1400 audit(1395312207.941:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=383 comm="apparmor_parser"
type=1400 audit(1395312207.941:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=383 comm="apparmor_parser"
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
media: Linux media interface: v0.10
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 334.21 Thu Feb 27 15:55:45 PST 2014
gspca_main: ov519-2.14.0 probing 05a9:a511
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 600G FW:883.K1a.D USB FW:K1a] on usb-0000:00:1a.0-1.1/input0
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input10
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.5/input0
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input11
hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.5/input1
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input12
hid-generic 0003:093A:2510.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.6/input0
gpio_ich: GPIO from 180 to 255 on gpio_ich
microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x5
platform microcode: Direct firmware load failed with error -2
platform microcode: Falling back to user helper
microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x5
platform microcode: Direct firmware load failed with error -2
platform microcode: Falling back to user helper
microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x5
platform microcode: Direct firmware load failed with error -2
platform microcode: Falling back to user helper
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
input: ov519 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/input/input13
usbcore: registered new interface driver ov519
Switched to clocksource tsc
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,barrier=0,commit=60
EXT4-fs (sda2): barriers disabled
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=0,commit=60
EXT4-fs (sdb5): mounted filesystem with writeback data mode. Opts: data=writeback
EXT4-fs (sdb6): mounted filesystem with writeback data mode. Opts: data=writeback
EXT4-fs (sdb7): mounted filesystem with writeback data mode. Opts: data=writeback
EXT4-fs (sdb8): mounted filesystem with writeback data mode. Opts: data=writeback
EXT4-fs (sdb9): mounted filesystem with writeback data mode. Opts: data=writeback
EXT4-fs (sdb10): mounted filesystem with writeback data mode. Opts: data=writeback
EXT4-fs (sdc1): mounted filesystem with writeback data mode. Opts: data=writeback
EXT4-fs (sdb11): mounted filesystem with writeback data mode. Opts: data=writeback
EXT4-fs (sdb12): mounted filesystem with writeback data mode. Opts: data=writeback
EXT4-fs (sdc2): mounted filesystem with writeback data mode. Opts: data=writeback
UDF-fs: warning (device loop0): udf_load_vrs: No anchor found
UDF-fs: Rescanning with blocksize 2048
UDF-fs: warning (device loop1): udf_load_vrs: No anchor found
UDF-fs: Rescanning with blocksize 2048
UDF-fs: INFO Mounting volume 'DVD RETROATIVO', timestamp 2013/07/23 18:52 (1f4c)
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: failsafe main process (844) killed by TERM signal
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
type=1400 audit(1395312213.543:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=983 comm="apparmor_parser"
type=1400 audit(1395312213.543:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=983 comm="apparmor_parser"
type=1400 audit(1395312213.543:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=983 comm="apparmor_parser"
type=1400 audit(1395312213.543:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=983 comm="apparmor_parser"
type=1400 audit(1395312213.543:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=983 comm="apparmor_parser"
type=1400 audit(1395312213.543:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=983 comm="apparmor_parser"
type=1400 audit(1395312213.551:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=980 comm="apparmor_parser"
type=1400 audit(1395312213.551:15): apparmor="STATUS" operation="profile_load" name="chromium_browser" pid=980 comm="apparmor_parser"
type=1400 audit(1395312213.551:16): apparmor="STATUS" operation="profile_replace" name="chromium_browser" pid=980 comm="apparmor_parser"
type=1400 audit(1395312213.555:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=981 comm="apparmor_parser"
init: smbd main process (822) killed by ABRT signal
init: smbd main process ended, respawning
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
init: smbd main process (1015) killed by ABRT signal
init: smbd main process ended, respawning
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: smbd main process (1034) killed by ABRT signal
init: smbd main process ended, respawning
init: avahi-cups-reload main process (1048) terminated with status 1
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
ppdev: user-space parallel port driver
init: smbd main process (1056) killed by ABRT signal
init: smbd main process ended, respawning
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
init: smbd main process (1070) killed by ABRT signal
init: smbd main process ended, respawning
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
init: smbd main process (1081) killed by ABRT signal
init: smbd main process ended, respawning
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
init: smbd main process (1094) killed by ABRT signal
init: smbd main process ended, respawning
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
init: smbd main process (1103) killed by ABRT signal
init: smbd main process ended, respawning
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
init: smbd main process (1121) killed by ABRT signal
init: smbd main process ended, respawning
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
init: smbd main process (1132) killed by ABRT signal
init: smbd main process ended, respawning
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
init: smbd main process (1143) killed by ABRT signal
init: smbd respawning too fast, stopped
init: isc-dhcp-server pre-start process (1209) terminated with status 127
e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
nvidia 0000:01:00.0: irq 49 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: winbind main process (2455) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2460) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2464) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2467) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2470) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2473) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2476) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2479) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2482) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2485) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2488) terminated with status 127
init: winbind respawning too fast, stopped
device eth0 entered promiscuous mode
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81cdeac0)
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x25b offMax=0xc4c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.8 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (4079) terminated with status 1
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
audit_printk_skb: 150 callbacks suppressed
type=1400 audit(1395313135.983:68): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=13390 comm="apparmor_parser"
type=1400 audit(1395313135.983:69): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=13390 comm="apparmor_parser"
type=1400 audit(1395313135.983:70): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=13390 comm="apparmor_parser"
usb 2-1.4: new high-speed USB device number 3 using ehci-pci
usb 2-1.4: New USB device found, idVendor=0930, idProduct=6545
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4: Product: DT 101 G2
usb 2-1.4: Manufacturer: Kingston
usb 2-1.4: SerialNumber: 0019E02B7592EBB1856001A0
usb-storage 2-1.4:1.0: USB Mass Storage device detected
scsi8 : usb-storage 2-1.4:1.0
usbcore: registered new interface driver usb-storage
scsi 8:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: [sdd] 30481152 512-byte logical blocks: (15.6 GB/14.5 GiB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sd 8:0:0:0: [sdd] Attached SCSI removable disk
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd1): barriers disabled
EXT4-fs (sdd1): mounted filesystem with writeback data mode. Opts: nobarrier,data=writeback,commit=900
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
init: smbd main process (4076) killed by TERM signal
vboxnetflt: 0 out of 1869 packets were not sent (directed to host)
EXT4-fs (sdd1): barriers disabled
EXT4-fs (sdd1): mounted filesystem with writeback data mode. Opts: nobarrier,data=writeback,commit=900
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
perf samples too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 2-1.4: USB disconnect, device number 3