dmesg - RP2Complex1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.23.1.el6.x86_64 (mockbuild@c6b5.bsys.dev.centos.org) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Mon Jun 18 18:58:52 BST 2012
Command line: initrd=initrd0.img root=live:CDLABEL=SLI20_A01 rootfstype=auto ro liveimg quiet rhgb vga=791 rd_NO_LUKS rd_NO_MD rd_NO_DM BOOT_IMAGE=vmlinuz0
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000007fab0000 (usable)
BIOS-e820: 000000007fab0000 - 000000007fac4000 (reserved)
BIOS-e820: 000000007fac4000 - 000000007fac6000 (usable)
BIOS-e820: 000000007fac6000 - 000000007fad5c00 (ACPI data)
BIOS-e820: 000000007fad5c00 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000880000000 (usable)
DMI 2.5 present.
SMBIOS version 2.5 @ 0xFCDD0
DMI: Dell Inc. PowerEdge R900/0C764H, BIOS 1.2.0 11/11/2010
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0100000000 mask FF00000000 write-back
2 base 0200000000 mask FE00000000 write-back
3 base 0400000000 mask FC00000000 write-back
4 base 0800000000 mask FF80000000 write-back
5 base 007FC00000 mask FFFFC00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
reg 2, base: 8GB, range: 8GB, type WB
reg 3, base: 16GB, range: 16GB, type WB
reg 4, base: 32GB, range: 2GB, type WB
reg 5, base: 2044MB, range: 4MB, type UC
total RAM covered: 32764M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 8M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2044MB, range: 4MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 16GB, type WB
reg 5, base: 32GB, range: 2GB, type WB
e820 update range: 000000007fc00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7fac6 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007fac6000
0000000000 - 007fa00000 page 2M
007fa00000 - 007fac6000 page 4k
kernel direct mapping tables up to 7fac6000 @ 8000-c000
init_memory_mapping: 0000000100000000-0000000880000000
0100000000 - 0880000000 page 2M
kernel direct mapping tables up to 880000000 @ a000-2d000
RAMDISK: 7e7a7000 - 7fa8e8aa
ACPI: RSDP 00000000000f2600 00024 (v02 DELL )
ACPI: XSDT 00000000000f26f8 00104 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000000f28f0 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 000000007fac6000 02EE5 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 000000007fad5c00 00040
ACPI: APIC 00000000000f29e4 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000000f2b43 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000000f2b93 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000000f2bcb 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000000f2c07 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 000000007fad0838 00210 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 000000007fad0a48 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 000000007fad06b8 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 000000007fad06e8 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000000f2d89 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 000000007fac8ee5 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007fac933b 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007fac9791 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007fac9be7 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007faca03d 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007faca493 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007faca8e9 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007facad3f 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007facb195 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007facb5eb 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007facba41 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007facbe97 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007facc2ed 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007facc743 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007faccb99 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007faccfef 001A1 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 000000007facd445 03273 (v01 DELL PE_SC3 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000880000000
Bootmem setup node 0 0000000000000000-0000000880000000
NODE_DATA [0000000000028000 - 000000000005bfff]
bootmap [0000000000100000 - 000000000020ffff] pages 110
(8 early reservations) ==> bootmem [0000000000 - 0880000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000200c864] TEXT DATA BSS ==> [0001000000 - 000200c864]
#3 [007e7a7000 - 007fa8e8aa] RAMDISK ==> [007e7a7000 - 007fa8e8aa]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [000200d000 - 000200d5a5] BRK ==> [000200d000 - 000200d5a5]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 0000028000] PGTABLE ==> [000000a000 - 0000028000]
found SMP MP-table at [ffff8800000fe710] fe710
[ffffea0000000000-ffffea001dbfffff] PMD -> [ffff880028600000-ffff8800445fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00880000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x000000a0
0: 0x00000100 -> 0x0007fab0
0: 0x0007fac4 -> 0x0007fac6
0: 0x00100000 -> 0x00880000
On node 0 totalpages: 8387153
DMA zone: 56 pages used for memmap
DMA zone: 132 pages reserved
DMA zone: 3811 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 504554 pages, LIFO batch:31
Normal zone: 107520 pages used for memmap
Normal zone: 7756800 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x18] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x1a] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x19] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x1b] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec81000] gsi_base[32])
IOAPIC[1]: apic_id 7, version 32, address 0xfec81000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 32 CPUs, 16 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 000000007fab0000 - 000000007fac4000
PM: Registered nosave memory: 000000007fac6000 - 000000007fad5000
PM: Registered nosave memory: 000000007fad5000 - 000000007fad6000
PM: Registered nosave memory: 000000007fad6000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880044600000 s92632 r8192 d22056 u131072
pcpu-alloc: s92632 r8192 d22056 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8265165
Policy zone: Normal
Kernel command line: initrd=initrd0.img root=live:CDLABEL=SLI20_A01 rootfstype=auto ro liveimg quiet rhgb vga=791 rd_NO_LUKS rd_NO_MD rd_NO_DM BOOT_IMAGE=vmlinuz0
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 32983524k/35651584k available (5086k kernel code, 2102972k absent, 565088k reserved, 7227k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1208
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 268435456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2393.556 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.11 BogoMIPS (lpj=2393556)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20793 entries in 82 pages
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E7440 @ 2.40GHz stepping 01
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
Brought up 16 CPUs
Total of 16 processors activated (76605.45 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
PCI: Dell PowerEdge R900 detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff88086c8be740), AE_NOT_FOUND
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xcc80-0xcc9f]
pci 0000:00:1d.1: reg 20 io port: [0xcca0-0xccbf]
pci 0000:00:1d.2: reg 20 io port: [0xccc0-0xccdf]
pci 0000:00:1d.3: reg 20 io port: [0xcce0-0xccff]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xde0ffc00-0xde0fffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
pci 0000:16:00.0: PME# supported from D0 D3hot D3cold
pci 0000:16:00.0: PME# disabled
pci 0000:16:00.3: PME# supported from D0 D3hot D3cold
pci 0000:16:00.3: PME# disabled
pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
pci 0000:00:02.0: bridge 32bit mmio: [0xde100000-0xde3fffff]
pci 0000:17:00.0: PME# supported from D0 D3hot D3cold
pci 0000:17:00.0: PME# disabled
pci 0000:17:01.0: PME# supported from D0 D3hot D3cold
pci 0000:17:01.0: PME# disabled
pci 0000:16:00.0: bridge io port: [0xe000-0xefff]
pci 0000:16:00.0: bridge 32bit mmio: [0xde200000-0xde3fffff]
pci 0000:19:00.0: reg 10 64bit mmio: [0xde380000-0xde3bffff]
pci 0000:19:00.0: reg 18 io port: [0xec00-0xecff]
pci 0000:19:00.0: reg 1c 64bit mmio: [0xde3c0000-0xde3fffff]
pci 0000:19:00.0: reg 30 32bit mmio pref: [0xde200000-0xde207fff]
pci 0000:19:00.0: supports D1
pci 0000:17:00.0: bridge io port: [0xe000-0xefff]
pci 0000:17:00.0: bridge 32bit mmio: [0xde200000-0xde3fffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:03.0: bridge 32bit mmio: [0xd6000000-0xddffffff]
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: PME# disabled
pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:01:00.0: bridge 32bit mmio: [0xd6000000-0xddffffff]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:02:02.0: bridge 32bit mmio: [0xd6000000-0xd7ffffff]
pci 0000:0b:00.0: reg 10 64bit mmio: [0xd6000000-0xd7ffffff]
pci 0000:0b:00.0: PME# supported from D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:0a:00.0: bridge 32bit mmio: [0xd6000000-0xd7ffffff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:02:03.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:08:00.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:02:04.0: bridge 32bit mmio: [0xda000000-0xdbffffff]
pci 0000:07:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:06:00.0: bridge 32bit mmio: [0xda000000-0xdbffffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:02:05.0: bridge 32bit mmio: [0xdc000000-0xddffffff]
pci 0000:05:00.0: reg 10 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: bridge 32bit mmio: [0xdc000000-0xddffffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:0d:02.0: PME# supported from D0 D3hot D3cold
pci 0000:0d:02.0: PME# disabled
pci 0000:0d:04.0: PME# supported from D0 D3hot D3cold
pci 0000:0d:04.0: PME# disabled
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: PME# disabled
pci 0000:11:02.0: PME# supported from D0 D3hot D3cold
pci 0000:11:02.0: PME# disabled
pci 0000:11:04.0: PME# supported from D0 D3hot D3cold
pci 0000:11:04.0: PME# disabled
pci 0000:1b:0c.0: reg 10 32bit mmio pref: [0xc8000000-0xcfffffff]
pci 0000:1b:0c.0: reg 14 io port: [0xdc00-0xdcff]
pci 0000:1b:0c.0: reg 18 32bit mmio: [0xde4f0000-0xde4fffff]
pci 0000:1b:0c.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:1b:0c.0: supports D1 D2
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xde400000-0xde4fffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN2.BCOM._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN3.BCOM._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN4.BCOM._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN5.BCOM._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.UPST.DWNB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.UPST.DWNC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.UPST.DWNB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.UPST.DWNC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
vgaarb: device added: PCI:0000:1b:0c.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:1b:0c.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x880-0x8bf has been reserved
system 00:07: ioport range 0x8c0-0x8df has been reserved
system 00:07: ioport range 0x8e0-0x8e3 has been reserved
system 00:07: ioport range 0x900-0x900 has been reserved
system 00:07: ioport range 0xc00-0xc7f has been reserved
system 00:07: ioport range 0xca0-0xca7 has been reserved
system 00:07: ioport range 0xca9-0xcab has been reserved
system 00:07: ioport range 0xcad-0xcaf has been reserved
system 00:08: ioport range 0xca8-0xca8 has been reserved
system 00:08: ioport range 0xcac-0xcac has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
pci 0000:00:01.0: PCI bridge to [bus 14-14]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:14
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:17:00.0: PCI bridge to [bus 19-19]
pci 0000:17:00.0: PCI bridge, secondary bus 0000:19
pci 0000:17:00.0: bridge window [0xe000-0xefff]
pci 0000:17:00.0: bridge window [0xde200000-0xde3fffff]
pci 0000:17:00.0: bridge window [mem pref disabled]
pci 0000:17:01.0: PCI bridge to [bus 18-18]
pci 0000:17:01.0: PCI bridge, secondary bus 0000:18
pci 0000:17:01.0: bridge window [io disabled]
pci 0000:17:01.0: bridge window [mem disabled]
pci 0000:17:01.0: bridge window [mem pref disabled]
pci 0000:16:00.0: PCI bridge to [bus 17-19]
pci 0000:16:00.0: PCI bridge, secondary bus 0000:17
pci 0000:16:00.0: bridge window [0xe000-0xefff]
pci 0000:16:00.0: bridge window [0xde200000-0xde3fffff]
pci 0000:16:00.0: bridge window [mem pref disabled]
pci 0000:16:00.3: PCI bridge to [bus 1a-1a]
pci 0000:16:00.3: PCI bridge, secondary bus 0000:1a
pci 0000:16:00.3: bridge window [io disabled]
pci 0000:16:00.3: bridge window [mem disabled]
pci 0000:16:00.3: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 16-1a]
pci 0000:00:02.0: PCI bridge, secondary bus 0000:16
pci 0000:00:02.0: bridge window [0xe000-0xefff]
pci 0000:00:02.0: bridge window [0xde100000-0xde3fffff]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:02:01.0: PCI bridge to [bus 03-03]
pci 0000:02:01.0: PCI bridge, secondary bus 0000:03
pci 0000:02:01.0: bridge window [io disabled]
pci 0000:02:01.0: bridge window [mem disabled]
pci 0000:02:01.0: bridge window [mem pref disabled]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b
pci 0000:0a:00.0: bridge window [io disabled]
pci 0000:0a:00.0: bridge window [0xd6000000-0xd7ffffff]
pci 0000:0a:00.0: bridge window [mem pref disabled]
pci 0000:02:02.0: PCI bridge to [bus 0a-0b]
pci 0000:02:02.0: PCI bridge, secondary bus 0000:0a
pci 0000:02:02.0: bridge window [io disabled]
pci 0000:02:02.0: bridge window [0xd6000000-0xd7ffffff]
pci 0000:02:02.0: bridge window [mem pref disabled]
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:08:00.0: PCI bridge, secondary bus 0000:09
pci 0000:08:00.0: bridge window [io disabled]
pci 0000:08:00.0: bridge window [0xd8000000-0xd9ffffff]
pci 0000:08:00.0: bridge window [mem pref disabled]
pci 0000:02:03.0: PCI bridge to [bus 08-09]
pci 0000:02:03.0: PCI bridge, secondary bus 0000:08
pci 0000:02:03.0: bridge window [io disabled]
pci 0000:02:03.0: bridge window [0xd8000000-0xd9ffffff]
pci 0000:02:03.0: bridge window [mem pref disabled]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [0xda000000-0xdbffffff]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:02:04.0: PCI bridge to [bus 06-07]
pci 0000:02:04.0: PCI bridge, secondary bus 0000:06
pci 0000:02:04.0: bridge window [io disabled]
pci 0000:02:04.0: bridge window [0xda000000-0xdbffffff]
pci 0000:02:04.0: bridge window [mem pref disabled]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0: bridge window [io disabled]
pci 0000:04:00.0: bridge window [0xdc000000-0xddffffff]
pci 0000:04:00.0: bridge window [mem pref disabled]
pci 0000:02:05.0: PCI bridge to [bus 04-05]
pci 0000:02:05.0: PCI bridge, secondary bus 0000:04
pci 0000:02:05.0: bridge window [io disabled]
pci 0000:02:05.0: bridge window [0xdc000000-0xddffffff]
pci 0000:02:05.0: bridge window [mem pref disabled]
pci 0000:01:00.0: PCI bridge to [bus 02-0b]
pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
pci 0000:01:00.0: bridge window [io disabled]
pci 0000:01:00.0: bridge window [0xd6000000-0xddffffff]
pci 0000:01:00.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 01-0b]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [0xd6000000-0xddffffff]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:0d:02.0: PCI bridge to [bus 0f-0f]
pci 0000:0d:02.0: PCI bridge, secondary bus 0000:0f
pci 0000:0d:02.0: bridge window [io disabled]
pci 0000:0d:02.0: bridge window [mem disabled]
pci 0000:0d:02.0: bridge window [mem pref disabled]
pci 0000:0d:04.0: PCI bridge to [bus 0e-0e]
pci 0000:0d:04.0: PCI bridge, secondary bus 0000:0e
pci 0000:0d:04.0: bridge window [io disabled]
pci 0000:0d:04.0: bridge window [mem disabled]
pci 0000:0d:04.0: bridge window [mem pref disabled]
pci 0000:0c:00.0: PCI bridge to [bus 0d-0f]
pci 0000:0c:00.0: PCI bridge, secondary bus 0000:0d
pci 0000:0c:00.0: bridge window [io disabled]
pci 0000:0c:00.0: bridge window [mem disabled]
pci 0000:0c:00.0: bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 0c-0f]
pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem disabled]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:11:02.0: PCI bridge to [bus 13-13]
pci 0000:11:02.0: PCI bridge, secondary bus 0000:13
pci 0000:11:02.0: bridge window [io disabled]
pci 0000:11:02.0: bridge window [mem disabled]
pci 0000:11:02.0: bridge window [mem pref disabled]
pci 0000:11:04.0: PCI bridge to [bus 12-12]
pci 0000:11:04.0: PCI bridge, secondary bus 0000:12
pci 0000:11:04.0: bridge window [io disabled]
pci 0000:11:04.0: bridge window [mem disabled]
pci 0000:11:04.0: bridge window [mem pref disabled]
pci 0000:10:00.0: PCI bridge to [bus 11-13]
pci 0000:10:00.0: PCI bridge, secondary bus 0000:11
pci 0000:10:00.0: bridge window [io disabled]
pci 0000:10:00.0: bridge window [mem disabled]
pci 0000:10:00.0: bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 10-13]
pci 0000:00:06.0: PCI bridge, secondary bus 0000:10
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem disabled]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 15-15]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1c.0: bridge window [0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [0x80000000-0x801fffff]
pci 0000:00:1c.0: bridge window [0x80200000-0x803fffff]
pci 0000:00:1e.0: PCI bridge to [bus 1b-1b]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:1b
pci 0000:00:1e.0: bridge window [0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [0xde400000-0xde4fffff]
pci 0000:00:1e.0: bridge window [0xc8000000-0xcfffffff]
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:02.0: setting latency timer to 64
pci 0000:16:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:16:00.0: setting latency timer to 64
pci 0000:17:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:17:00.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:17:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:17:01.0: setting latency timer to 64
pci 0000:16:00.3: setting latency timer to 64
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
pci 0000:00:03.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37
pci 0000:00:03.0: setting latency timer to 64
pci 0000:01:00.0: setting latency timer to 64
pci 0000:02:01.0: setting latency timer to 64
pci 0000:02:02.0: setting latency timer to 64
pci 0000:0a:00.0: setting latency timer to 64
pci 0000:02:03.0: setting latency timer to 64
pci 0000:08:00.0: setting latency timer to 64
pci 0000:02:04.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:02:05.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
pci 0000:00:04.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:04.0: setting latency timer to 64
pci 0000:0c:00.0: setting latency timer to 64
pci 0000:0d:02.0: setting latency timer to 64
pci 0000:0d:04.0: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
pci 0000:00:06.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
pci 0000:00:06.0: setting latency timer to 64
pci 0000:10:00.0: setting latency timer to 64
pci 0000:11:02.0: setting latency timer to 64
pci 0000:11:04.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:16: resource 0 io: [0xe000-0xefff]
pci_bus 0000:16: resource 1 mem: [0xde100000-0xde3fffff]
pci_bus 0000:17: resource 0 io: [0xe000-0xefff]
pci_bus 0000:17: resource 1 mem: [0xde200000-0xde3fffff]
pci_bus 0000:19: resource 0 io: [0xe000-0xefff]
pci_bus 0000:19: resource 1 mem: [0xde200000-0xde3fffff]
pci_bus 0000:01: resource 1 mem: [0xd6000000-0xddffffff]
pci_bus 0000:02: resource 1 mem: [0xd6000000-0xddffffff]
pci_bus 0000:0a: resource 1 mem: [0xd6000000-0xd7ffffff]
pci_bus 0000:0b: resource 1 mem: [0xd6000000-0xd7ffffff]
pci_bus 0000:08: resource 1 mem: [0xd8000000-0xd9ffffff]
pci_bus 0000:09: resource 1 mem: [0xd8000000-0xd9ffffff]
pci_bus 0000:06: resource 1 mem: [0xda000000-0xdbffffff]
pci_bus 0000:07: resource 1 mem: [0xda000000-0xdbffffff]
pci_bus 0000:04: resource 1 mem: [0xdc000000-0xddffffff]
pci_bus 0000:05: resource 1 mem: [0xdc000000-0xddffffff]
pci_bus 0000:15: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:15: resource 1 mem: [0x80000000-0x801fffff]
pci_bus 0000:15: resource 2 pref mem [0x80200000-0x803fffff]
pci_bus 0000:1b: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:1b: resource 1 mem: [0xde400000-0xde4fffff]
pci_bus 0000:1b: resource 2 pref mem [0xc8000000-0xcfffffff]
pci_bus 0000:1b: resource 3 io: [0x00-0xffff]
pci_bus 0000:1b: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:1b:0c.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19358k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1395311363.560:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key CA2975F3E810BFBE
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:02.0: irq 57 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 58 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:04.0: irq 59 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:06.0: irq 60 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 61 for MSI/MSI-X
pcieport 0000:01:00.0: setting latency timer to 64
pcieport 0000:02:01.0: setting latency timer to 64
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
pcieport 0000:02:01.0: irq 62 for MSI/MSI-X
pcieport 0000:02:02.0: setting latency timer to 64
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
pcieport 0000:02:02.0: irq 63 for MSI/MSI-X
pcieport 0000:02:03.0: setting latency timer to 64
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
pcieport 0000:02:03.0: irq 64 for MSI/MSI-X
pcieport 0000:02:04.0: setting latency timer to 64
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
pcieport 0000:02:04.0: irq 65 for MSI/MSI-X
pcieport 0000:02:05.0: setting latency timer to 64
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
pcieport 0000:02:05.0: irq 66 for MSI/MSI-X
pcieport 0000:0c:00.0: setting latency timer to 64
pcieport 0000:0d:02.0: setting latency timer to 64
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
pcieport 0000:0d:02.0: irq 67 for MSI/MSI-X
pcieport 0000:0d:04.0: setting latency timer to 64
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
pcieport 0000:0d:04.0: irq 68 for MSI/MSI-X
pcieport 0000:10:00.0: setting latency timer to 64
pcieport 0000:11:02.0: setting latency timer to 64
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
pcieport 0000:11:02.0: irq 69 for MSI/MSI-X
pcieport 0000:11:04.0: setting latency timer to 64
alloc irq_desc for 70 on node -1
alloc kstat_irqs on node -1
pcieport 0000:11:04.0: irq 70 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcieffffffc4: HPC vendor_id 8086 device_id 2690 ss_vid 0 ss_did 0
pciehp 0000:00:1c.0:pcieffffffc4: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: framebuffer at 0xc8000000, mapped to 0xffffc90013e00000, using 3072k, total 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x2220
intel_idle: does not run on family 6 model 29
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
processor LNXCPU:0c: registered as cooling_device12
processor LNXCPU:0d: registered as cooling_device13
processor LNXCPU:0e: registered as cooling_device14
processor LNXCPU:0f: registered as cooling_device15
ERST: Can not request iomem region for ERST.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xde0ffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000cc80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cca0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ccc0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000cce0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2014-03-20 10:29:25 UTC (1395311365)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1756k freed
dracut: dracut-004-256.el6_2.1
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: root was live:/dev/disk/by-label/SLI20_A01, liveroot is now live:CDLABEL=SLI20_A01
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (c8000000 2000000) vs hw (c8000000 8000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
radeon 0000:1b:0c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[drm] initializing kernel modesetting (RV100 0x1002:0x515E).
[drm] register mmio base: 0xDE4F0000
[drm] register mmio size: 65536
radeon 0000:1b:0c.0: VRAM: 128M 0x00000000C8000000 - 0x00000000CFFFFFFF (32M used)
radeon 0000:1b:0c.0: GTT: 512M 0x00000000A8000000 - 0x00000000C7FFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 16503462 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
radeon 0000:1b:0c.0: WB enabled
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x00000000A8001000
[drm] ring test succeeded in 2 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] No valid Ext TMDS info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-D
[drm] HPD2
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] DFP2: INTERNAL_DVO1
usb 1-2: new high speed USB device using ehci_hcd and address 2
Switching to clocksource tsc
[drm] fb mappable at 0xC8040000
[drm] vram apper at 0xC8000000
[drm] size 1310720
[drm] fb depth is 8
[drm] pitch is 1280
fbcon: radeondrmfb (fb0) is primary device
usb 1-2: New USB device found, idVendor=413c, idProduct=a001
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 2 ports detected
Console: switching to colour frame buffer device 160x64
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.10.0 20080528 for 0000:1b:0c.0 on minor 0
dracut: Starting plymouth daemon
usb 1-7: new high speed USB device using ehci_hcd and address 4
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 1-7: New USB device found, idVendor=04b4, idProduct=6560
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-7: configuration #1 chosen from 1 choice
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 2 ports detected
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata2: port disabled. ignoring.
Switching to clocksource hpet
usb 3-1: new low speed USB device using uhci_hcd and address 2
ata1.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-T10N, A102, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST CDRW/DVD GCCT10N A102 PQ: 0 ANSI: 5
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.1.fw
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:05:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem dc000000, IRQ 38, node addr 00:22:19:7e:45:83
bnx2 0000:07:00.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37
bnx2 0000:07:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.1.fw
bnx2 0000:07:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:07:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem da000000, IRQ 37, node addr 00:22:19:7e:45:85
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
bnx2 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.1.fw
bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:09:00.0: eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d8000000, IRQ 19, node addr 00:22:19:7e:45:87
bnx2 0000:0b:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
bnx2 0000:0b:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.1.fw
bnx2 0000:0b:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:0b:00.0: eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d6000000, IRQ 18, node addr 00:22:19:7e:45:89
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
usb 3-1: New USB device found, idVendor=0a81, idProduct=0205
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: PS2 to USB Converter
usb 3-1: Manufacturer: CHESEN
usb 3-1: configuration #1 chosen from 1 choice
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.1-1/input0
input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3
generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.1-1/input1
usb 1-2.1: new full speed USB device using ehci_hcd and address 5
usb 1-2.1: New USB device found, idVendor=413c, idProduct=0000
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.1: Product: DRAC5
usb 1-2.1: Manufacturer: Dell
usb 1-2.1: SerialNumber: 0000000
usb 1-2.1: configuration #1 chosen from 1 choice
input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.0/input/input4
generic-usb 0003:413C:0000.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-2.1/input0
input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.1/input/input5
generic-usb 0003:413C:0000.0004: input,hidraw3: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-2.1/input1
usb 1-7.1: new high speed USB device using ehci_hcd and address 6
usb 1-7.1: New USB device found, idVendor=04b4, idProduct=6560
usb 1-7.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-7.1: configuration #1 chosen from 1 choice
hub 1-7.1:1.0: USB hub found
hub 1-7.1:1.0: 2 ports detected
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/live-rw
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1395311372.303:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
EDAC MC: Ver: 2.1.0 Jun 18 2012
EDAC MC0: Giving out device to 'i7300_edac.c' 'I7300': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i7300_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU1 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU2 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU3 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU4 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU5 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU6 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU7 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU8 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU9 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU10 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU11 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU12 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU13 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU14 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU15 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
Microcode Update Driver: v2.00 , Peter Oruba
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sr 0:0:0:0: Attached scsi generic sg0 type 5
megasas: 00.00.05.40-rh2 Thu. Aug. 4 17:00:00 PDT 2011
megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 25:slot 0:func 0
megaraid_sas 0000:19:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
megaraid_sas 0000:19:00.0: setting latency timer to 64
megasas: FW now in Ready state
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
megaraid_sas: fw state:c0000000
megasas: fwstate:c0000000, dis_OCR=0
scsi2 : LSI SAS based MegaRAID driver
scsi 2:0:0:0: Direct-Access SEAGATE ST9146803SS FS66 PQ: 0 ANSI: 5
scsi 2:0:1:0: Direct-Access SEAGATE ST9146803SS FS66 PQ: 0 ANSI: 5
scsi 2:0:32:0: Enclosure DP BACKPLANE 1.06 PQ: 0 ANSI: 5
scsi 2:0:32:0: Attached scsi generic sg1 type 13
ses 2:0:32:0: Attached Enclosure device
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
bnx2 0000:0b:00.0: PCI INT A disabled
bnx2 0000:09:00.0: PCI INT A disabled
bnx2 0000:07:00.0: PCI INT A disabled
bnx2 0000:05:00.0: PCI INT A disabled
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
bnx2 0000:05:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.1.fw
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:05:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem dc000000, IRQ 38, node addr 00:22:19:7e:45:83
bnx2 0000:07:00.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37
bnx2 0000:07:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.1.fw
bnx2 0000:07:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:07:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem da000000, IRQ 37, node addr 00:22:19:7e:45:85
bnx2 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.1.fw
bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:09:00.0: eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d8000000, IRQ 19, node addr 00:22:19:7e:45:87
bnx2 0000:0b:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
bnx2 0000:0b:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.1.fw
bnx2 0000:0b:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:0b:00.0: eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d6000000, IRQ 18, node addr 00:22:19:7e:45:89
Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.00-0 (2011/06/13)
dca service started, version 1.12.1
Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k
Copyright (c) 2007-2011 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.4.8-k
ixgbe: Copyright (c) 1999-2011 Intel Corporation.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
TECH PREVIEW: FCOE Target support may not be fully supported.
Please review provided documentation for limitations.
TARGET_CORE[0]: Loading Generic Kernel Storage Engine: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.32-220.23.1.el6.x86_64
TARGET_CORE[0]: Initialized ConfigFS Fabric Infrastructure: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.32-220.23.1.el6.x86_64
TCM: Registered subsystem plugin: rd_dr struct module: (null)
TCM: Registered subsystem plugin: rd_mcp struct module: (null)
CORE_HBA[0] - TCM Ramdisk HBA Driver v4.0 on Generic Target Core Stack v4.0.0-rc7-ml
CORE_HBA[0] - Attached Ramdisk HBA: 0 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024
CORE_HBA[0] - Attached HBA to Generic Target Core
RAMDISK: Referencing Page Count: 8
CORE_RD[0] - Built Ramdisk Device ID: 0 space of 8 pages in 1 tables
rd_dr: Using SPC_PASSTHROUGH, no reservation emulation
rd_dr: Using SPC_ALUA_PASSTHROUGH, no ALUA emulation
Vendor: LIO-ORG Model: RAMDISK-DR Revision: 4.0
Type: Direct-Access ANSI SCSI revision: 05
CORE_RD[0] - Added TCM DIRECT Ramdisk Device ID: 0 of 8 pages in 1 tables, 32768 total bytes
TCM: Registered subsystem plugin: pscsi struct module: ffffffffa05b6ee0
TCM: Registered subsystem plugin: fileio struct module: ffffffffa05bf7c0
TCM: Registered subsystem plugin: iblock struct module: ffffffffa05c6880
alloc irq_desc for 71 on node -1
alloc kstat_irqs on node -1
bnx2 0000:0b:00.0: irq 71 for MSI/MSI-X
bnx2 0000:0b:00.0: eth3: using MSI
ADDRCONF(NETDEV_UP): eth3: link is not ready
alloc irq_desc for 72 on node -1
alloc kstat_irqs on node -1
bnx2 0000:09:00.0: irq 72 for MSI/MSI-X
bnx2 0000:09:00.0: eth2: using MSI
ADDRCONF(NETDEV_UP): eth2: link is not ready
alloc irq_desc for 73 on node -1
alloc kstat_irqs on node -1
bnx2 0000:07:00.0: irq 73 for MSI/MSI-X
bnx2 0000:07:00.0: eth1: using MSI
ADDRCONF(NETDEV_UP): eth1: link is not ready
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 74 for MSI/MSI-X
bnx2 0000:05:00.0: eth0: using MSI
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
IPMI kcs interface initialized
ipmi device interface
Fusion MPT base driver 3.04.19
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT misc device (ioctl) driver 3.04.19
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
mpt2sas version 09.101.00.00 loaded
nfsd: last server has exited, flushing export cache
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
readahead-collector: sorting
readahead-collector: finished
fuse init (API version 7.13)
IPMI System Interface driver.
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
IPMI kcs interface initialized