dmesg - tEST-PROVA

Return To tEST-PROVA System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-18-generic (buildd@toyol) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #32-Ubuntu SMP Tue Feb 18 21:11:14 UTC 2014 (Ubuntu 3.11.0-18.32-generic 3.11.10.4)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000deb8ffff] usable
BIOS-e820: [mem 0x00000000deb90000-0x00000000dee08fff] reserved
BIOS-e820: [mem 0x00000000dee09000-0x00000000dee8cfff] ACPI NVS
BIOS-e820: [mem 0x00000000dee8d000-0x00000000df13ffff] reserved
BIOS-e820: [mem 0x00000000df140000-0x00000000df384fff] ACPI NVS
BIOS-e820: [mem 0x00000000df385000-0x00000000df392fff] ACPI data
BIOS-e820: [mem 0x00000000df393000-0x00000000df3bffff] ACPI NVS
BIOS-e820: [mem 0x00000000df3c0000-0x00000000df3c4fff] ACPI data
BIOS-e820: [mem 0x00000000df3c5000-0x00000000df407fff] ACPI NVS
BIOS-e820: [mem 0x00000000df408000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: System manufacturer System Product Name/P8P67 EVO, BIOS 3602 11/01/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x81f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask 800000000 write-back
  1 base 800000000 mask FF0000000 write-back
  2 base 810000000 mask FF8000000 write-back
  3 base 818000000 mask FFC000000 write-back
  4 base 81C000000 mask FFE000000 write-back
  5 base 81E000000 mask FFF000000 write-back
  6 base 0E0000000 mask FE0000000 uncachable
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 256MB, type WB
reg 2, base: 33024MB, range: 128MB, type WB
reg 3, base: 33152MB, range: 64MB, type WB
reg 4, base: 33216MB, range: 32MB, type WB
reg 5, base: 33248MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 32752M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 32M 	num_reg: 8  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 512MB, type WB
reg 7, base: 33264MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce00-0x000fce0f] mapped at [ffff8800000fce00]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x81ee00000-0x81effffff]
 [mem 0x81ee00000-0x81effffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x81c000000-0x81edfffff]
 [mem 0x81c000000-0x81edfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x81bffffff]
 [mem 0x800000000-0x81bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdeb8ffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xde9fffff] page 2M
 [mem 0xdea00000-0xdeb8ffff] page 4k
init_memory_mapping: [mem 0xdf408000-0xdf7fffff]
 [mem 0xdf408000-0xdf5fffff] page 4k
 [mem 0xdf600000-0xdf7fffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
 [mem 0x100000000-0x7ffffffff] page 2M
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
RAMDISK: [mem 0x3504a000-0x3681cfff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000df385078 00064 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 00000000df390ce0 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
ACPI: DSDT 00000000df385170 0BB6D (v02 ALASKA    A M I 00000015 INTL 20051117)
ACPI: FACS 00000000df3bef80 00040
ACPI: APIC 00000000df390dd8 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 00000000df390e50 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000df390e90 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000df390ec8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000df391238 009AA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000df391be8 00A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: BGRT 00000000df3926d8 00038 (v00 ALASKA    A M I 01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081effffff]
Initmem setup node 0 [mem 0x00000000-0x81effffff]
  NODE_DATA [mem 0x81efdc000-0x81efe0fff]
 [ffffea0000000000-ffffea00207fffff] PMD -> [ffff8807fe600000-ffff88081e5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x81effffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009cfff]
  node   0: [mem 0x00100000-0xdeb8ffff]
  node   0: [mem 0xdf408000-0xdf7fffff]
  node   0: [mem 0x100000000-0x81effffff]
On node 0 totalpages: 8380196
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 14207 pages used for memmap
  DMA32 zone: 909192 pages, LIFO batch:31
  Normal zone: 116672 pages used for memmap
  Normal zone: 7467008 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdeb90000-0xdee08fff]
PM: Registered nosave memory: [mem 0xdee09000-0xdee8cfff]
PM: Registered nosave memory: [mem 0xdee8d000-0xdf13ffff]
PM: Registered nosave memory: [mem 0xdf140000-0xdf384fff]
PM: Registered nosave memory: [mem 0xdf385000-0xdf392fff]
PM: Registered nosave memory: [mem 0xdf393000-0xdf3bffff]
PM: Registered nosave memory: [mem 0xdf3c0000-0xdf3c4fff]
PM: Registered nosave memory: [mem 0xdf3c5000-0xdf407fff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88081ec00000 s86720 r8192 d23872 u524288
pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8249232
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32888872K/33520784K available (7154K kernel code, 1083K rwdata, 3312K rodata, 1364K init, 1420K bss, 631912K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3399.544 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.08 BogoMIPS (lpj=13598176)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27858 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (27196.35 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdee09000-0xdee8cfff] (540672 bytes)
PM: Registering ACPI NVS region [mem 0xdf140000-0xdf384fff] (2379776 bytes)
PM: Registering ACPI NVS region [mem 0xdf393000-0xdf3bffff] (184320 bytes)
PM: Registering ACPI NVS region [mem 0xdf3c5000-0xdf407fff] (274432 bytes)
regulator-dummy: no parameters
RTC time:  8:23:00, date: 03/15/14
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000df0ed018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000df0eea98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000df0efc18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
_OSC request data:1 8 0 
_OSC request data:1 1f 0 
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf762c000-0xf762c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7600000-0xf761ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7629000-0xf7629fff]
pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7628000-0xf76283ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7620000-0xf7623fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7627000-0xf76273ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7626000-0xf76267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7625000-0xf76250ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xf7500000-0xf7501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:04:00.0: [197b:2362] type 00 class 0x010185
pci 0000:04:00.0: reg 0x10: [io  0xd040-0xd047]
pci 0000:04:00.0: reg 0x14: [io  0xd030-0xd033]
pci 0000:04:00.0: reg 0x18: [io  0xd020-0xd027]
pci 0000:04:00.0: reg 0x1c: [io  0xd010-0xd013]
pci 0000:04:00.0: reg 0x20: [io  0xd000-0xd00f]
pci 0000:04:00.0: reg 0x24: [mem 0xf7410000-0xf74101ff]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xf7300000-0xf7301fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4:   bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.6:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.6:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.6:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.6:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.6:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.6:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.6:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:07:01.0: [1106:3038] type 00 class 0x0c0300
pci 0000:07:01.0: reg 0x20: [io  0xc1a0-0xc1bf]
pci 0000:07:01.0: supports D1 D2
pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot
pci 0000:07:01.1: [1106:3038] type 00 class 0x0c0300
pci 0000:07:01.1: reg 0x20: [io  0xc180-0xc19f]
pci 0000:07:01.1: supports D1 D2
pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot
pci 0000:07:01.2: [1106:3104] type 00 class 0x0c0320
pci 0000:07:01.2: reg 0x10: [mem 0xf7222000-0xf72220ff]
pci 0000:07:01.2: supports D1 D2
pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot
pci 0000:07:02.0: [10ec:8167] type 00 class 0x020000
pci 0000:07:02.0: reg 0x10: [io  0xc000-0xc0ff]
pci 0000:07:02.0: reg 0x14: [mem 0xf7221000-0xf72210ff]
pci 0000:07:02.0: reg 0x30: [mem 0xf7200000-0xf721ffff pref]
pci 0000:07:02.0: supports D1 D2
pci 0000:07:02.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:03.0: [1106:3044] type 00 class 0x0c0010
pci 0000:07:03.0: reg 0x10: [mem 0xf7220000-0xf72207ff]
pci 0000:07:03.0: reg 0x14: [io  0xc100-0xc17f]
pci 0000:07:03.0: supports D2
pci 0000:07:03.0: PME# supported from D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:06:00.0:   bridge window [io  0xc000-0xcfff]
pci 0000:06:00.0:   bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:06:00.0:   bridge window [io  0xc000-0xcfff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0xf7200000-0xf72fffff] (subtractive decode)
pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:06:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:08:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:08:00.0: reg 0x10: [io  0xb040-0xb047]
pci 0000:08:00.0: reg 0x14: [io  0xb030-0xb033]
pci 0000:08:00.0: reg 0x18: [io  0xb020-0xb027]
pci 0000:08:00.0: reg 0x1c: [io  0xb010-0xb013]
pci 0000:08:00.0: reg 0x20: [io  0xb000-0xb00f]
pci 0000:08:00.0: reg 0x24: [mem 0xf7110000-0xf71101ff]
pci 0000:08:00.0: reg 0x30: [mem 0xf7100000-0xf710ffff pref]
pci 0000:08:00.0: PME# supported from D3hot
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xdeb90000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x81f000000-0x81fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io  0x0680-0x069f] has been reserved
system 00:04: [io  0x0200-0x020f] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0x0400-0x0453] could not be reserved
system 00:04: [io  0x0458-0x047f] has been reserved
system 00:04: [io  0x0500-0x057f] has been reserved
system 00:04: [io  0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io  0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xe0000000-0xe0000fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0100000-0xe02fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0300000-0xe04fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xe0500000-0xe05fffff pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xe0100000-0xe02fffff]
pci 0000:00:1c.0:   bridge window [mem 0xe0300000-0xe04fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:04:00.0: BAR 6: assigned [mem 0xe0500000-0xe050ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:00:1c.3:   bridge window [mem 0xe0500000-0xe05fffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4:   bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0:   bridge window [io  0xc000-0xcfff]
pci 0000:06:00.0:   bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.6: PCI bridge to [bus 06-07]
pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:06:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe02fffff]
pci_bus 0000:02: resource 2 [mem 0xe0300000-0xe04fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf7400000-0xf74fffff]
pci_bus 0000:04: resource 2 [mem 0xe0500000-0xe05fffff pref]
pci_bus 0000:05: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:06: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:06: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:06: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:07: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:07: resource 4 [io  0xc000-0xcfff]
pci_bus 0000:07: resource 5 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:07: resource 8 [io  0x0000-0x0cf7]
pci_bus 0000:07: resource 9 [io  0x0d00-0xffff]
pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:07: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:07: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:07: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:07: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:07: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:07: resource 17 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:08: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 24396K (ffff88003504a000 - ffff88003681d000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdab90000-0xdeb90000] (64MB) mapped at [ffff8800dab90000-ffff8800deb8ffff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1394871779.756:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7628000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7627000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:07:01.2: EHCI Host Controller
ehci-pci 0000:07:01.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:07:01.2: irq 17, io mem 0xf7222000
ehci-pci 0000:07:01.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
usb usb3: SerialNumber: 0000:07:01.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:07:01.0: UHCI Host Controller
uhci_hcd 0000:07:01.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:07:01.0: irq 19, io base 0x0000c1a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-18-generic uhci_hcd
usb usb4: SerialNumber: 0000:07:01.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:07:01.1: UHCI Host Controller
uhci_hcd 0000:07:01.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:07:01.1: irq 16, io base 0x0000c180
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-18-generic uhci_hcd
usb usb5: SerialNumber: 0000:07:01.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
usb usb6: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
usb usb7: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
usb usb8: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
usb usb9: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9d94dc8d073854d044b3fa3652786ac75597c2f5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 6:776:371
rtc_cmos 00:05: setting system clock to 2014-03-15 08:23:00 UTC (1394871780)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1028K (ffff8800016ff000 - ffff880001800000)
Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
systemd-udevd[116]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 51 for MSI/MSI-X
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:02.0 (unregistered net_device): not PCI Express
r8169 0000:07:02.0 eth0: RTL8169sc/8110sc at 0xffffc9000303c000, f4:6d:04:99:dc:11, XID 18000000 IRQ 16
r8169 0000:07:02.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626100 irq 51
ata2: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626180 irq 51
ata3: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626200 irq 51
ata4: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626280 irq 51
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626380 irq 51
e1000e 0000:00:19.0: setting latency timer to 64
ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 52 for MSI/MSI-X
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf7410000 port 0xf7410100 irq 19
ata8: SATA max UDMA/133 abar m512@0xf7410000 port 0xf7410180 irq 19
ahci 0000:08:00.0: irq 53 for MSI/MSI-X
ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110100 irq 53
ata10: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110180 irq 53
firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth1: registered PHC clock
e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) f4:6d:04:99:cb:99
e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth1: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8807f2cb5708), AE_NOT_FOUND (20130517/psparse-536)
ata2.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff8807f2cb57f8), AE_NOT_FOUND (20130517/psparse-536)
ata4.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807f2cb58e8), AE_NOT_FOUND (20130517/psparse-536)
ata6.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8807f2cb5708), AE_NOT_FOUND (20130517/psparse-536)
ata2.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff8807f2cb57f8), AE_NOT_FOUND (20130517/psparse-536)
ata4.00: configured for UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807f2cb58e8), AE_NOT_FOUND (20130517/psparse-536)
ata6.00: configured for UDMA/100
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8807f2cb5690), AE_NOT_FOUND (20130517/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff8807f2cb5780), AE_NOT_FOUND (20130517/psparse-536)
ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff8807f2cb5780), AE_NOT_FOUND (20130517/psparse-536)
ata3.00: configured for UDMA/133
ata1.00: ATA-9: Corsair Force 3 SSD, 1.2, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
firewire_core 0000:07:03.0: created device fw0: GUID 001e8c000045fb0d, S400
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8807f2cb5690), AE_NOT_FOUND (20130517/psparse-536)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Corsair Force 3  1.2  PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-7241S  1.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
scsi 5:0:0:0: CD-ROM            Optiarc  DVD RW AD-7241S  1.03 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 5:0:0:0: Attached scsi CD-ROM sr1
sr 5:0:0:0: Attached scsi generic sg4 type 5
 sdb: sdb2 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
 sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 > sdc4
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 8-1: new full-speed USB device number 2 using xhci_hcd
usb 8-1: New USB device found, idVendor=11c5, idProduct=5123
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB PC/SC SmartCard Reader
usb 8-1: Manufacturer: Inmax Technology Corp.
usb 8-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
tsc: Refined TSC clocksource calibration: 3399.621 MHz
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
usb 1-1.4: New USB device found, idVendor=4971, idProduct=1014
usb 1-1.4: New USB device strings: Mfr=10, Product=11, SerialNumber=3
usb 1-1.4: Product: Touro Mobile 3.0
usb 1-1.4: Manufacturer: HGST
usb 1-1.4: SerialNumber: 21001401090002201199
usb-storage 1-1.4:1.0: USB Mass Storage device detected
scsi10 : usb-storage 1-1.4:1.0
usbcore: registered new interface driver usb-storage
usb 1-1.6: new high-speed USB device number 4 using ehci-pci
usb 1-1.6: New USB device found, idVendor=058f, idProduct=6362
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Mass Storage Device
usb 1-1.6: Manufacturer: Generic
usb 1-1.6: SerialNumber: 058F63626476
usb-storage 1-1.6:1.0: USB Mass Storage device detected
scsi11 : usb-storage 1-1.6:1.0
usb 5-1: new low-speed USB device number 2 using uhci_hcd
usb 5-1: New USB device found, idVendor=046d, idProduct=c219
usb 5-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 5-1: Product: Logitech Cordless RumblePad 2
usb 5-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:1c.6/0000:06:00.0/0000:07:01.1/usb5/5-1/5-1:1.0/input/input2
logitech 0003:046D:C219.0001: input,hidraw0: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:07:01.1-1/input0
logitech 0003:046D:C219.0001: missing HID_OUTPUT_REPORT 0
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=04d9, idProduct=1702
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Keyboard
usb 2-1.1: Manufacturer:  
input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.0-1.1/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input4
hid-generic 0003:04D9:1702.0003: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.0-1.1/input1
Switched to clocksource tsc
usb 2-1.2: new high-speed USB device number 4 using ehci-pci
usb 2-1.2: New USB device found, idVendor=058f, idProduct=6254
usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1.2:1.0: USB hub found
hub 2-1.2:1.0: 4 ports detected
usb 2-1.3: new full-speed USB device number 5 using ehci-pci
usb 2-1.3: New USB device found, idVendor=046d, idProduct=c52b
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3: Product: USB Receiver
usb 2-1.3: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input2
scsi 11:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
scsi 11:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0006/input/input5
logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-1.3:1
scsi 11:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
scsi 11:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0
usb 2-1.6: new high-speed USB device number 6 using ehci-pci
usb 2-1.6: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.6: Product: USB2.0 Hub
hub 2-1.6:1.0: USB hub found
hub 2-1.6:1.0: 4 ports detected
usb 2-1.7: new full-speed USB device number 7 using ehci-pci
usb 2-1.7: New USB device found, idVendor=0cf3, idProduct=3000
usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.2.4: new high-speed USB device number 8 using ehci-pci
usb 2-1.2.4: New USB device found, idVendor=058f, idProduct=6254
usb 2-1.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1.2.4:1.0: USB hub found
hub 2-1.2.4:1.0: 4 ports detected
vesafb: module verification failed: signature and/or required key missing - tainting kernel
EXT4-fs (sda6): INFO: recovery required on readonly filesystem
EXT4-fs (sda6): write access will be enabled during recovery
usb 2-1.2.4.2: new low-speed USB device number 9 using ehci-pci
EXT4-fs (sda6): recovery complete
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.2.4.2: New USB device found, idVendor=056a, idProduct=0060
usb 2-1.2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2.4.2: Product: FT-0405-UV1.4-2
usb 2-1.2.4.2: Manufacturer: WACOM
Adding 16751612k swap on /dev/sda5.  Priority:-1 extents:1 across:16751612k SSFS
usb 2-1.2.4.3: new full-speed USB device number 10 using ehci-pci
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[353]: starting version 204
lp: driver loaded but no devices found
wmi: Mapper loaded
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 54 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  319.32  Wed Jun 19 15:51:20 PDT 2013
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
usb 2-1.2.4.3: string descriptor 0 read error: -32
usb 2-1.2.4.3: New USB device found, idVendor=03eb, idProduct=6201
usb 2-1.2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
input: HID 03eb:6201 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.3/2-1.2.4.3:1.0/input/input6
hid-generic 0003:03EB:6201.0008: input,hidraw5: USB HID v1.11 Keyboard [HID 03eb:6201] on usb-0000:00:1d.0-1.2.4.3/input0
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
type=1400 audit(1394868183.966:2): apparmor="STATUS" operation="profile_load" parent=391 profile="unconfined" name="/sbin/dhclient" pid=496 comm="apparmor_parser"
type=1400 audit(1394868183.966:3): apparmor="STATUS" operation="profile_load" parent=391 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=496 comm="apparmor_parser"
type=1400 audit(1394868183.966:4): apparmor="STATUS" operation="profile_load" parent=391 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=496 comm="apparmor_parser"
type=1400 audit(1394868183.966:5): apparmor="STATUS" operation="profile_replace" parent=444 profile="unconfined" name="/sbin/dhclient" pid=497 comm="apparmor_parser"
type=1400 audit(1394868183.966:6): apparmor="STATUS" operation="profile_replace" parent=444 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=497 comm="apparmor_parser"
type=1400 audit(1394868183.966:7): apparmor="STATUS" operation="profile_replace" parent=444 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=497 comm="apparmor_parser"
type=1400 audit(1394868183.966:8): apparmor="STATUS" operation="profile_replace" parent=391 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=496 comm="apparmor_parser"
type=1400 audit(1394868183.966:9): apparmor="STATUS" operation="profile_replace" parent=391 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=496 comm="apparmor_parser"
type=1400 audit(1394868183.966:10): apparmor="STATUS" operation="profile_replace" parent=444 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=497 comm="apparmor_parser"
input: Wacom Volito as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4.2/2-1.2.4.2:1.0/input/input7
usbcore: registered new interface driver wacom
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
asus_wmi: Disabling ACPI video driver
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
microcode: Microcode Update Driver: v2.00 , Peter Oruba
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
usbcore: registered new interface driver ath3k
usb 2-1.7: USB disconnect, device number 7
hda-intel 0000:00:1b.0: Codec #3 probe error; disabling it...
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x11/0x1e
   inputs:
     Front Mic=0x19
     Rear Mic=0x18
     Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
hda_intel: Disabling MSI
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
usb 2-1.7: new full-speed USB device number 11 using ehci-pci
usb 2-1.7: New USB device found, idVendor=0cf3, idProduct=3005
usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver btusb
init: failsafe main process (916) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (1001) terminated with status 1
ppdev: user-space parallel port driver
audit_printk_skb: 9 callbacks suppressed
type=1400 audit(1394868185.982:14): apparmor="STATUS" operation="profile_load" parent=1032 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1041 comm="apparmor_parser"
type=1400 audit(1394868185.982:15): apparmor="STATUS" operation="profile_load" parent=1032 profile="unconfined" name="/usr/sbin/cupsd" pid=1041 comm="apparmor_parser"
type=1400 audit(1394868185.982:16): apparmor="STATUS" operation="profile_replace" parent=1032 profile="unconfined" name="/usr/sbin/cupsd" pid=1041 comm="apparmor_parser"
type=1400 audit(1394868185.982:17): apparmor="STATUS" operation="profile_replace" parent=1048 profile="unconfined" name="/sbin/dhclient" pid=1059 comm="apparmor_parser"
type=1400 audit(1394868185.982:18): apparmor="STATUS" operation="profile_replace" parent=1048 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1059 comm="apparmor_parser"
type=1400 audit(1394868185.982:19): apparmor="STATUS" operation="profile_replace" parent=1048 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1059 comm="apparmor_parser"
type=1400 audit(1394868185.986:20): apparmor="STATUS" operation="profile_replace" parent=1048 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1059 comm="apparmor_parser"
type=1400 audit(1394868185.986:21): apparmor="STATUS" operation="profile_replace" parent=1048 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1059 comm="apparmor_parser"
type=1400 audit(1394868185.986:22): apparmor="STATUS" operation="profile_replace" parent=1048 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1059 comm="apparmor_parser"
type=1400 audit(1394868185.986:23): apparmor="STATUS" operation="profile_load" parent=1048 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1058 comm="apparmor_parser"
e1000e 0000:00:19.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 52 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169 0000:07:02.0 eth0: link down
r8169 0000:07:02.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x12f offMax=0x897
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.8 (interface 0x001a0007).
init: udev-fallback-graphics main process (1248) terminated with status 1
vboxpci: IOMMU not found (not registered)
scsi 10:0:0:0: Direct-Access     HGST                      0000 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 11:0:0:0: Attached scsi generic sg6 type 0
sd 11:0:0:1: Attached scsi generic sg7 type 0
sd 11:0:0:2: Attached scsi generic sg8 type 0
sd 11:0:0:3: Attached scsi generic sg9 type 0
sd 10:0:0:0: [sdd] 976773116 512-byte logical blocks: (500 GB/465 GiB)
sd 10:0:0:0: [sdd] Write Protect is off
sd 10:0:0:0: [sdd] Mode Sense: 27 00 00 00
sd 10:0:0:0: [sdd] No Caching mode page found
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sd 10:0:0:0: [sdd] No Caching mode page found
sd 10:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1
sd 10:0:0:0: [sdd] No Caching mode page found
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sd 10:0:0:0: [sdd] Attached SCSI disk
sd 11:0:0:0: [sde] Attached SCSI removable disk
sd 11:0:0:1: [sdf] Attached SCSI removable disk
sd 11:0:0:2: [sdg] Attached SCSI removable disk
sd 11:0:0:3: [sdh] Attached SCSI removable disk
r8169 0000:07:02.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
show_signal_msg: 153 callbacks suppressed
SyncThread[2892]: segfault at 9 ip 00007fa45fac2c10 sp 00007fa454e23c68 error 4 in libdbus-1.so.3.7.4[7fa45faa6000+44000]
systemd-hostnamed[4290]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
xor: automatically using best checksumming function:
   avx       : 24534.000 MB/sec
raid6: sse2x1    8712 MB/s
raid6: sse2x2   10722 MB/s
raid6: sse2x4   12349 MB/s
raid6: using algorithm sse2x4 (12349 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab  at 1
Btrfs loaded
type=1400 audit(1394869254.941:75): apparmor="STATUS" operation="profile_replace" parent=28597 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=28601 comm="apparmor_parser"
type=1400 audit(1394869254.941:76): apparmor="STATUS" operation="profile_replace" parent=28597 profile="unconfined" name="/usr/sbin/cupsd" pid=28601 comm="apparmor_parser"
type=1400 audit(1394869254.941:77): apparmor="STATUS" operation="profile_replace" parent=28597 profile="unconfined" name="/usr/sbin/cupsd" pid=28601 comm="apparmor_parser"
systemd-hostnamed[16063]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)

Return To tEST-PROVA System Information