dmesg - 760k
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bce6b000 (usable)
BIOS-e820: 00000000bce6b000 - 00000000bce9b000 (reserved)
BIOS-e820: 00000000bce9b000 - 00000000bd157000 (usable)
BIOS-e820: 00000000bd157000 - 00000000bd212000 (ACPI NVS)
BIOS-e820: 00000000bd212000 - 00000000be23c000 (reserved)
BIOS-e820: 00000000be23c000 - 00000000be23d000 (usable)
BIOS-e820: 00000000be23d000 - 00000000be443000 (ACPI NVS)
BIOS-e820: 00000000be443000 - 00000000be882000 (usable)
BIOS-e820: 00000000be882000 - 00000000beff3000 (reserved)
BIOS-e820: 00000000beff3000 - 00000000bf000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved)
BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023f000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: MSI MS-7793/FM2-A55-G43 (MS-7793), BIOS V3.4 02/13/2014
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF000000 mask FFFFFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bf000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fd910] fd910
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf000000
0000000000 - 0080000000 page 1G
0080000000 - 00bf000000 page 2M
kernel direct mapping tables up to bf000000 @ 1fffe000-20000000
init_memory_mapping: 0000000100000000-000000023f000000
0100000000 - 0200000000 page 1G
0200000000 - 023f000000 page 2M
kernel direct mapping tables up to 23f000000 @ beffe000-bf000000
RAMDISK: 36b54000 - 375a2000
ACPI: RSDP 00000000000f04a0 00024 (v02 ALASKA)
ACPI: XSDT 00000000bd1db080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bd1e1708 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
ACPI: DSDT 00000000bd1db190 06573 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bd208e80 00040
ACPI: APIC 00000000bd1e1818 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000bd1e1890 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bd1e18d8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000bd1e1918 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 00000000bd1e1950 00068 (v02 AMD BANTRY 00000001 AMD 00000000)
ACPI: SSDT 00000000bd1e19b8 004B7 (v02 AMD BANTRY 00000001 MSFT 04000000)
ACPI: CRAT 00000000bd1e1e70 00578 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 00000000bd1e23e8 00852 (v01 AMD CPMDFDGP 00000001 INTL 20051117)
ACPI: SSDT 00000000bd1e2c40 01463 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 00000000bd1e40a8 0122C (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000023f000000
Initmem setup node 0 0000000000000000-000000023f000000
NODE_DATA [000000023effb000 - 000000023effffff]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236600000-ffff88023d5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023f000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bce6b
0: 0x000bce9b -> 0x000bd157
0: 0x000be23c -> 0x000be23d
0: 0x000be443 -> 0x000be882
0: 0x000beff3 -> 0x000bf000
0: 0x00100000 -> 0x0023f000
On node 0 totalpages: 2082050
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 757164 pages, LIFO batch:31
Normal zone: 17864 pages used for memmap
Normal zone: 1288760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bce6b000 - 00000000bce9b000
PM: Registered nosave memory: 00000000bd157000 - 00000000bd212000
PM: Registered nosave memory: 00000000bd212000 - 00000000be23c000
PM: Registered nosave memory: 00000000be23d000 - 00000000be443000
PM: Registered nosave memory: 00000000be882000 - 00000000beff3000
PM: Registered nosave memory: 00000000bf000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf000000 (gap: bf000000:3fc00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s82944 r8192 d23552 u524288
pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2049845
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8127936k/9420800k available (3426k kernel code, 1092600k absent, 200264k reserved, 3312k data, 576k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:712 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 4390.123 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 8780.24 BogoMIPS (lpj=17560492)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00bf000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) X4 760K Quad Core Processor stepping 01
Performance Events: AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#3 Ok.
smpboot cpu 3: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (35121.26 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at bd157000 (765952 bytes)
PM: Registering ACPI NVS region at be23d000 (2121728 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
Extended Config Space enabled on 0 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 0 class 0x000600
pci 0000:00:00.2: [1022:1419] type 0 class 0x000806
pci 0000:00:02.0: [1022:1412] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1414] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7814] type 0 class 0x000c03
pci 0000:00:10.0: reg 10: [mem 0xfeb06000-0xfeb07fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: [1022:7814] type 0 class 0x000c03
pci 0000:00:10.1: reg 10: [mem 0xfeb04000-0xfeb05fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 24: [mem 0xfeb0d000-0xfeb0d7ff]
pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfeb0c000-0xfeb0cfff]
pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfeb0b000-0xfeb0b0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:18.0: [1022:1400] type 0 class 0x000600
pci 0000:00:18.1: [1022:1401] type 0 class 0x000600
pci 0000:00:18.2: [1022:1402] type 0 class 0x000600
pci 0000:00:18.3: [1022:1403] type 0 class 0x000600
pci 0000:00:18.4: [1022:1404] type 0 class 0x000600
pci 0000:00:18.5: [1022:1405] type 0 class 0x000600
pci 0000:01:00.0: [1002:6819] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfea00000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:03:05.0: [168c:001a] type 0 class 0x000200
pci 0000:03:05.0: reg 10: [mem 0xfe900000-0xfe90ffff]
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e800 - 000000000009ffff
reserve RAM buffer: 00000000bce6b000 - 00000000bfffffff
reserve RAM buffer: 00000000bd157000 - 00000000bfffffff
reserve RAM buffer: 00000000be23d000 - 00000000bfffffff
reserve RAM buffer: 00000000be882000 - 00000000bfffffff
reserve RAM buffer: 00000000bf000000 - 00000000bfffffff
reserve RAM buffer: 000000023f000000 - 000000023fffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [mem 0xc0000000-0xbfffffff disabled]
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfeb80000-0xfebfffff]
system 00:03: [mem 0xfeb80000-0xfebfffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:04: [io 0x0295-0x0296]
pnp 00:04: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:04: [io 0x0000-0xffffffffffffffff disabled]
system 00:04: [io 0x0295-0x0296] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0060]
pnp 00:05: [io 0x0064]
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:06: [io 0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 4]
pnp 00:08: [io 0x0000-0x000f]
pnp 00:08: [io 0x0081-0x0083]
pnp 00:08: [io 0x0087]
pnp 00:08: [io 0x0089-0x008b]
pnp 00:08: [io 0x008f]
pnp 00:08: [io 0x00c0-0x00df]
pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:09: [io 0x0070-0x0071]
pnp 00:09: [irq 8]
pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0a: [io 0x0061]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:0b: [io 0x0010-0x001f]
pnp 00:0b: [io 0x0022-0x003f]
pnp 00:0b: [io 0x0044-0x005f]
pnp 00:0b: [io 0x0072-0x007f]
pnp 00:0b: [io 0x0080]
pnp 00:0b: [io 0x0084-0x0086]
pnp 00:0b: [io 0x0088]
pnp 00:0b: [io 0x008c-0x008e]
pnp 00:0b: [io 0x0090-0x009f]
pnp 00:0b: [io 0x00a2-0x00bf]
pnp 00:0b: [io 0x00e0-0x00ef]
pnp 00:0b: [io 0x04d0-0x04d1]
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x00f0-0x00ff]
pnp 00:0c: [irq 13]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0d: [io 0x0010-0x001f]
pnp 00:0d: [io 0x0022-0x003f]
pnp 00:0d: [io 0x0063]
pnp 00:0d: [io 0x0065]
pnp 00:0d: [io 0x0067-0x006f]
pnp 00:0d: [io 0x0072-0x007f]
pnp 00:0d: [io 0x0080]
pnp 00:0d: [io 0x0084-0x0086]
pnp 00:0d: [io 0x0088]
pnp 00:0d: [io 0x008c-0x008e]
pnp 00:0d: [io 0x0090-0x009f]
pnp 00:0d: [io 0x00a2-0x00bf]
pnp 00:0d: [io 0x00b1]
pnp 00:0d: [io 0x00e0-0x00ef]
pnp 00:0d: [io 0x04d0-0x04d1]
pnp 00:0d: [io 0x040b]
pnp 00:0d: [io 0x04d6]
pnp 00:0d: [io 0x0c00-0x0c01]
pnp 00:0d: [io 0x0c14]
pnp 00:0d: [io 0x0c50-0x0c51]
pnp 00:0d: [io 0x0c52]
pnp 00:0d: [io 0x0c6c]
pnp 00:0d: [io 0x0c6f]
pnp 00:0d: [io 0x0cd0-0x0cd1]
pnp 00:0d: [io 0x0cd2-0x0cd3]
pnp 00:0d: [io 0x0cd4-0x0cd5]
pnp 00:0d: [io 0x0cd6-0x0cd7]
pnp 00:0d: [io 0x0cd8-0x0cdf]
pnp 00:0d: [io 0x0800-0x089f]
pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0d: [io 0x0000-0x000f]
pnp 00:0d: [io 0x0b20-0x0b3f]
pnp 00:0d: [io 0x0900-0x090f]
pnp 00:0d: [io 0x0910-0x091f]
pnp 00:0d: [io 0xfe00-0xfefe]
pnp 00:0d: [io 0x0060-0x005f disabled]
pnp 00:0d: [io 0x0064-0x0063 disabled]
pnp 00:0d: [mem 0xfec00000-0xfec00fff]
pnp 00:0d: [mem 0xfee00000-0xfee00fff]
pnp 00:0d: [mem 0xfed80000-0xfed8ffff]
pnp 00:0d: [mem 0xfed61000-0xfed70fff]
pnp 00:0d: [mem 0xfec10000-0xfec10fff]
pnp 00:0d: [mem 0xfed00000-0xfed00fff]
pnp 00:0d: [mem 0xff000000-0xffffffff]
system 00:0d: [io 0x04d0-0x04d1] has been reserved
system 00:0d: [io 0x040b] has been reserved
system 00:0d: [io 0x04d6] has been reserved
system 00:0d: [io 0x0c00-0x0c01] has been reserved
system 00:0d: [io 0x0c14] has been reserved
system 00:0d: [io 0x0c50-0x0c51] has been reserved
system 00:0d: [io 0x0c52] has been reserved
system 00:0d: [io 0x0c6c] has been reserved
system 00:0d: [io 0x0c6f] has been reserved
system 00:0d: [io 0x0cd0-0x0cd1] has been reserved
system 00:0d: [io 0x0cd2-0x0cd3] has been reserved
system 00:0d: [io 0x0cd4-0x0cd5] has been reserved
system 00:0d: [io 0x0cd6-0x0cd7] has been reserved
system 00:0d: [io 0x0cd8-0x0cdf] has been reserved
system 00:0d: [io 0x0800-0x089f] has been reserved
system 00:0d: [io 0x0b20-0x0b3f] has been reserved
system 00:0d: [io 0x0900-0x090f] has been reserved
system 00:0d: [io 0x0910-0x091f] has been reserved
system 00:0d: [io 0xfe00-0xfefe] has been reserved
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:0d: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:0d: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0xfed00000-0xfed003ff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10552k freed
pci 0000:00:00.2: irq 40 for MSI/MSI-X
AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 extended features: PreF PPR GT IA
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800b8e6b000 - ffff8800bce6b000
software IO TLB at phys 0xb8e6b000 - 0xbce6b000
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[Firmware Bug]: cpu 2, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100)
Failed to setup IBS, -22
audit: initializing netlink socket (disabled)
type=2000 audit(1394810868.812:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15895
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:09: RTC can wake from S4
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:09: setting system clock to 2014-03-14 15:27:50 UTC (1394810870)
Initializing network drop monitor service
Freeing unused kernel memory: 576k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 652k freed
Freeing unused kernel memory: 688k freed
udevd[58]: starting version 175
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 41 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c72000, 44:8a:5b:26:59:57, XID 0c900800 IRQ 41
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new device driver usb
xhci_hcd 0000:00:10.0: setting latency timer to 64
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
SCSI subsystem initialized
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:00:10.1: setting latency timer to 64
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb0b000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb09000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 52 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d100 irq 52
ata2: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d180 irq 52
ata3: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d200 irq 52
ata4: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d280 irq 52
ata5: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d300 irq 52
ata6: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d380 irq 52
ata7: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d400 irq 52
ata8: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d480 irq 52
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0c000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
usb usb7: SerialNumber: 0000:00:12.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 8
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb0a000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI Host Controller
usb usb8: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
usb usb8: SerialNumber: 0000:00:13.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb08000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI Host Controller
usb usb9: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
usb usb9: SerialNumber: 0000:00:14.5
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
usb 5-3: new high-speed USB device number 2 using ehci_hcd
ata8: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb 5-3: New USB device found, idVendor=058f, idProduct=6364
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-3: Product: Mass Storage Device
usb 5-3: Manufacturer: Generic
usb 5-3: SerialNumber: 058F63646476
Initializing USB Mass Storage driver...
scsi8 : usb-storage 5-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-9: SAMSUNG SSD 830 Series, CXM01B1Q, max UDMA/133
ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata4.00: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL02, max UDMA/100
ata1.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL02 PQ: 0 ANSI: 5
generic-usb 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:12.2-3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 3:0:0:0: Attached scsi generic sg2 type 5
Refined TSC clocksource calibration: 4390.449 MHz.
Switching to clocksource tsc
usb 8-2: new low-speed USB device number 2 using ohci_hcd
usb 8-2: New USB device found, idVendor=046d, idProduct=c315
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Logitech USB Keyboard
usb 8-2: Manufacturer: Logitech
input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb8/8-2/8-2:1.0/input/input0
generic-usb 0003:046D:C315.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-2/input0
microcode: CPU0: patch_level=0x06001119
platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
microcode: CPU1: patch_level=0x06001119
platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
microcode: CPU2: patch_level=0x06001119
platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
microcode: CPU3: patch_level=0x06001119
platform microcode: firmware: agent loaded amd-ucode/microcode_amd_fam15h.bin into memory
microcode: Microcode Update Driver: v2.00 , Peter Oruba
PM: Starting manual resume from disk
PM: Hibernation image partition 8:21 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
scsi 8:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:1: Attached scsi generic sg4 type 0
sd 8:0:0:2: Attached scsi generic sg5 type 0
sd 8:0:0:3: Attached scsi generic sg6 type 0
sd 8:0:0:1: [sdd] Attached SCSI removable disk
udevd[438]: starting version 175
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:2: [sde] Attached SCSI removable disk
sd 8:0:0:3: [sdf] Attached SCSI removable disk
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
udevd[464]: renamed network interface eth0 to eth1
input: PC Speaker as /devices/platform/pcspkr/input/input3
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:1c: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:1b/LNXVIDEO:01/input/input4
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
wmi: Mapper loaded
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
powernow-k8: Found 1 AMD Athlon(tm) X4 760K Quad Core Processor (4 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
cfg80211: Calling CRDA to update world regulatory domain
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
ath5k 0000:03:05.0: registered as 'phy0'
[fglrx] Maximum main memory to use for locked dma buffers: 7717 MBytes.
[fglrx] vendor: 1002 device: 6819 count: 1
[fglrx] IOMMU is enabled, CrossFire are not supported on this platform
[fglrx] Disable IOMMU in BIOS options or kernel boot parameters to support CF
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
snd_hda_intel 0000:01:00.1: irq 53 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: setting latency timer to 64
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
hda-codec: out of range cmd 0:0:1e5c:707:40
hda-codec: out of range cmd 0:0:1e5c:708:1edc
hda-codec: out of range cmd 0:0:fffe:707:40
hda-codec: out of range cmd 0:0:fffe:708:fffe
HDMI status: Codec=0 Pin=2 Presence_Detect=0 ELD_Valid=0
hda-codec: out of range cmd 0:0:e0:f0d:0
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=9 Presence_Detect=0 ELD_Valid=0
hda-codec: out of range cmd 0:0:1e5c:f00:c
hda-codec: out of range cmd 0:0:1e5c:709:0
hda-codec: out of range cmd 0:0:1e5c:f09:0
HDMI status: Codec=0 Pin=7772 Presence_Detect=1 ELD_Valid=1
hda-codec: out of range cmd 0:0:1e5c:f2e:8
hda-codec: out of range cmd 0:0:1e5c:709:0
hda-codec: out of range cmd 0:0:1e5c:f09:0
HDMI status: Codec=0 Pin=0 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=1 Presence_Detect=0 ELD_Valid=0
hda_codec: cannot build controls for #0 (error -16)
hda_codec: cannot revert codec
snd_hda_intel: probe of 0000:01:00.1 failed with error -16
Adding 2579452k swap on /dev/sdb5. Priority:-1 extents:1 across:2579452k SS
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
EXT4-fs (sdb1): re-mounted. Opts: (null)
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
loop: module loaded
f71882fg: Found f71889a chip at 0x290, revision 49
f71882fg f71882fg.656: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.656: Fan: 2 is in duty-cycle mode
f71882fg f71882fg.656: Fan: 3 is in duty-cycle mode
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
fglrx_pci 0000:01:00.0: irq 53 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 2123
[fglrx] Firegl kernel thread PID: 2124
[fglrx] Firegl kernel thread PID: 2125
[fglrx] IRQ 53 Enabled
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000
powernow-k8: Found 1 AMD Athlon(tm) X4 760K Quad Core Processor (4 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
[fglrx] ATIF platform detected with notification ID: 0x81
r8169 0000:02:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
r8169 0000:02:00.0: eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000f address=0x0000000000000000 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000f address=0x0000000000000040 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000f address=0x0000000000000080 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000f address=0x00000000000000c0 flags=0x0000]
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB2_.VGA_.AF03] (Node ffff880235c8a470), AE_AML_INFINITE_LOOP (20110623/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB2_.VGA_.ATIF] (Node ffff880235c8a678), AE_AML_INFINITE_LOOP (20110623/psparse-536)
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wlan0: authenticate with 02:23:08:c0:7e:d9 (try 1)
wlan0: authenticated
wlan0: associate with 02:23:08:c0:7e:d9 (try 1)
wlan0: RX AssocResp from 02:23:08:c0:7e:d9 (capab=0x411 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
fuse init (API version 7.17)
wlan0: no IPv6 routers present
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)