dmesg - SLES12B2Prime

Return To SLES12B2Prime System Information

CPU0 microcode updated early to revision 0x19, date = 2013-06-21
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.12.12-13.g4bba7b5-default (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP Mon Mar 10 17:03:03 UTC 2014 (4bba7b5)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000053fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/P6T6 WS REVOLUTION, BIOS 0905    12/24/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x540000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E3FFF write-protect
  E4000-EBFFF write-through
  EC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask C00000000 write-back
  1 base 400000000 mask F00000000 write-back
  2 base 500000000 mask FC0000000 write-back
  3 base 0C0000000 mask FC0000000 uncachable
  4 base 0BF800000 mask FFF800000 uncachable
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01d9e000, 0x01d9efff] PGTABLE
BRK [0x01d9f000, 0x01d9ffff] PGTABLE
BRK [0x01da0000, 0x01da0fff] PGTABLE
init_memory_mapping: [mem 0x53fe00000-0x53fffffff]
 [mem 0x53fe00000-0x53fffffff] page 2M
BRK [0x01da1000, 0x01da1fff] PGTABLE
init_memory_mapping: [mem 0x53c000000-0x53fdfffff]
 [mem 0x53c000000-0x53fdfffff] page 2M
init_memory_mapping: [mem 0x500000000-0x53bffffff]
 [mem 0x500000000-0x53bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf77ffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xbf5fffff] page 2M
 [mem 0xbf600000-0xbf77ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x4ffffffff]
 [mem 0x100000000-0x4ffffffff] page 2M
BRK [0x01da2000, 0x01da2fff] PGTABLE
BRK [0x01da3000, 0x01da3fff] PGTABLE
RAMDISK: [mem 0x36ed0000-0x3775ffff]
ACPI: RSDP 00000000000fb390 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bf780000 0003C (v01 122410 RSDT1856 20101224 MSFT 00000097)
ACPI: FACP 00000000bf780200 00084 (v01 122410 FACP1856 20101224 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 0B455 (v01  A1107 A1107001 00000001 INTL 20060113)
ACPI: FACS 00000000bf798000 00040
ACPI: APIC 00000000bf780390 000D8 (v01 122410 APIC1856 20101224 MSFT 00000097)
ACPI: MCFG 00000000bf780470 0003C (v01 122410 OEMMCFG  20101224 MSFT 00000097)
ACPI: OEMB 00000000bf798040 00072 (v01 122410 OEMB1856 20101224 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 00038 (v01 122410 OEMHPET  20101224 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 000B0 (v01 122410 OEMOSFR  20101224 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000053fffffff]
Initmem setup node 0 [mem 0x00000000-0x53fffffff]
  NODE_DATA [mem 0x53ffdb000-0x53ffeefff]
Reserving 128MB of memory at 736MB for crashkernel (System RAM: 20471MB)
 [ffffea0000000000-ffffea00125fffff] PMD -> [ffff88052b600000-ffff88053cdfffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x53fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0xbf77ffff]
  node   0: [mem 0x100000000-0x53fffffff]
On node 0 totalpages: 5240605
  DMA zone: 56 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 10667 pages used for memmap
  DMA32 zone: 780160 pages, LIFO batch:31
  Normal zone: 60928 pages used for memmap
  Normal zone: 4456448 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff]
PM: Registered nosave memory: [mem 0x000e5000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff]
PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88053fc00000 s82752 r8192 d23744 u131072
pcpu-alloc: s82752 r8192 d23744 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 5168933
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 20453560K/20962420K available (5067K kernel code, 749K rwdata, 3936K rodata, 1300K init, 1620K bss, 508860K reserved)
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
NR_IRQS:33024 nr_irqs:1216 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3740.059 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7480.11 BogoMIPS (lpj=14960236)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81c02000 - ffffffff81c07000)
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU         950  @ 3.07GHz (fam: 06, model: 1a, stepping: 05)
APIC calibration not consistent with PM-Timer: 139ms instead of 100ms
APIC delta adjusted to PM-Timer: 1062499 (1487485)
Performance Events: PEBS fmt1+, 16-deep LBR, perf_event_intel: Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
CPU1 microcode updated early to revision 0x19, date = 2013-06-21
CPU2 microcode updated early to revision 0x19, date = 2013-06-21
CPU3 microcode updated early to revision 0x19, date = 2013-06-21
smpboot: Booting Node   0, Processors smpboot:  #   1smpboot:  #   2smpboot:  #   3smpboot:  #   4smpboot:  #   5smpboot:  #   6smpboot:  #   7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (59840.94 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:39:06, date: 03/11/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0xa800-0xa81f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0xa880-0xa89f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0xac00-0xac1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf3fff000-0xf3fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf3ff8000-0xf3ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xa080-0xa09f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xa400-0xa41f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xa480-0xa49f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf3ffe000-0xf3ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io  0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x9c00-0x9c07]
pci 0000:00:1f.2: reg 0x14: [io  0x9880-0x9883]
pci 0000:00:1f.2: reg 0x18: [io  0x9800-0x9807]
pci 0000:00:1f.2: reg 0x1c: [io  0x9480-0x9483]
pci 0000:00:1f.2: reg 0x20: [io  0x9400-0x941f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf3ffc000-0xf3ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf3ffd000-0xf3ffd0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 02-05]
pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:03.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:03.0:   bridge window [mem 0xc8000000-0xd3ffffff 64bit pref]
pci 0000:03:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:02.0: [10de:05b1] type 01 class 0x060400
pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-05]
pci 0000:02:00.0:   bridge window [io  0xb000-0xbfff]
pci 0000:02:00.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:02:00.0:   bridge window [mem 0xc8000000-0xd3ffffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [10de:1200] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff]
pci 0000:05:00.0: reg 0x14: [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:05:00.0: reg 0x1c: [mem 0xd0000000-0xd3ffffff 64bit pref]
pci 0000:05:00.0: reg 0x24: [io  0xbc00-0xbc7f]
pci 0000:05:00.0: reg 0x30: [mem 0xf7f00000-0xf7f7ffff pref]
pci 0000:05:00.1: [10de:0e0c] type 00 class 0x040300
pci 0000:05:00.1: reg 0x10: [mem 0xf7ffc000-0xf7ffffff]
pci 0000:03:02.0: PCI bridge to [bus 05]
pci 0000:03:02.0:   bridge window [io  0xb000-0xbfff]
pci 0000:03:02.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:03:02.0:   bridge window [mem 0xc8000000-0xd3ffffff 64bit pref]
pci 0000:06:00.0: [10de:1200] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff]
pci 0000:06:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:06:00.0: reg 0x1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
pci 0000:06:00.0: reg 0x24: [io  0xcc00-0xcc7f]
pci 0000:06:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
pci 0000:06:00.1: [10de:0e0c] type 00 class 0x040300
pci 0000:06:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
pci 0000:00:07.0: PCI bridge to [bus 06]
pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:07.0:   bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:07.0:   bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 09]
pci 0000:00:1c.0:   bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [io  0xe800-0xe8ff]
pci 0000:08:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit]
pci 0000:08:00.0: reg 0x20: [mem 0xf2ef0000-0xf2efffff 64bit pref]
pci 0000:08:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.1:   bridge window [mem 0xf2e00000-0xf2efffff 64bit pref]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io  0xd800-0xd8ff]
pci 0000:07:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit]
pci 0000:07:00.0: reg 0x20: [mem 0xf2df0000-0xf2dfffff 64bit pref]
pci 0000:07:00.0: reg 0x30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2:   bridge window [mem 0xf2d00000-0xf2dfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
vgaarb: bridge control possible 0000:05:00.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io  0x0290-0x029f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: [io  0x0800-0x087f] could not be reserved
system 00:06: [io  0x0500-0x057f] could not be reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 400000
pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:02.0: PCI bridge to [bus 05]
pci 0000:03:02.0:   bridge window [io  0xb000-0xbfff]
pci 0000:03:02.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:03:02.0:   bridge window [mem 0xc8000000-0xd3ffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03-05]
pci 0000:02:00.0:   bridge window [io  0xb000-0xbfff]
pci 0000:02:00.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:02:00.0:   bridge window [mem 0xc8000000-0xd3ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02-05]
pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:03.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:03.0:   bridge window [mem 0xc8000000-0xd3ffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 06]
pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:07.0:   bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:07.0:   bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 09]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.1:   bridge window [mem 0xf2e00000-0xf2efffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2:   bridge window [mem 0xf2d00000-0xf2dfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:02: resource 2 [mem 0xc8000000-0xd3ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:03: resource 2 [mem 0xc8000000-0xd3ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:05: resource 2 [mem 0xc8000000-0xd3ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xf8000000-0xfbcfffff]
pci_bus 0000:06: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
pci_bus 0000:09: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:09: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:09: resource 2 [mem 0xf2f00000-0xf2ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 2 [mem 0xf2e00000-0xf2efffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:07: resource 2 [mem 0xf2d00000-0xf2dfffff 64bit pref]
pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:0a: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:0a: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:06:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8768K (ffff880036ed0000 - ffff880037760000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1394555945.360:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 65 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 66 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90013700000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
TCP: cubic registered
NET: Registered protocol family 10
Loading compiled-in X.509 certificates
Loaded X.509 cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7'
Loaded X.509 cert 'Kernel OBS Project: 1fb41512acbc8eebdf828d877e4367bf6c719af3'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
  Magic number: 6:636:691
PM: Checking hibernation image partition /dev/sda1
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1300K (ffffffff81abd000 - ffffffff81c02000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1068K (ffff8800014f5000 - ffff880001600000)
Freeing unused kernel memory: 160K (ffff8800019d8000 - ffff880001a00000)
systemd[1]: systemd 210 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Running in initial RAM disk.
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
SCSI subsystem initialized
systemd-udevd[166]: starting version 210
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf3fff000
libata version 3.00 loaded.
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12.12-13.g4bba7b5-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3ffe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.12.12-13.g4bba7b5-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.12.12-13.g4bba7b5-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.12.12-13.g4bba7b5-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.12.12-13.g4bba7b5-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.12.12-13.g4bba7b5-default uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.12.12-13.g4bba7b5-default uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.12.12-13.g4bba7b5-default uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 67 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc100 irq 67
ata2: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc180 irq 67
ata3: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc200 irq 67
ata4: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc280 irq 67
ata5: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc300 irq 67
ata6: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc380 irq 67
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=0781, idProduct=5575
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Cruzer Glide
usb 1-1: Manufacturer: SanDisk
usb 1-1: SerialNumber: 200445277309D7924BB2
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 2-4: new high-speed USB device number 2 using ehci-pci
ata1.00: ATAPI: HL-DT-ST BD-RE  BH10LS30, 1.00, max UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH10LS30  1.00 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 5
usb 2-4: New USB device found, idVendor=03f0, idProduct=ac11
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: Deskjet 2510 series
usb 2-4: Manufacturer: HP
usb 2-4: SerialNumber: CN36J3JHKJ05QX
tsc: Refined TSC clocksource calibration: 3739.999 MHz
usb 8-1: new low-speed USB device number 2 using uhci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg1 type 0
usb 8-1: New USB device found, idVendor=046d, idProduct=c05a
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB Optical Mouse
usb 8-1: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1/input0
usb 8-2: new low-speed USB device number 3 using uhci_hcd
usb 8-2: New USB device found, idVendor=05c7, idProduct=2012
usb 8-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 8-2: Product: USB Keyboard
input: USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4
hid-generic 0003:05C7:2012.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:1d.2-2/input0
scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.26 PQ: 0 ANSI: 5
scsi 6:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
 sdb: sdb1
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
sd 1:0:0:0: [sda] Attached SCSI disk
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
ata3.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD203WI  1AN1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unknown main item tag 0x0
hid-generic 0003:05C7:2012.0003: unbalanced collection at end of report description
hid-generic: probe of 0003:05C7:2012.0003 failed with error -22
 sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
Switched to clocksource tsc
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg4 type 0
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1 < sdd5 sdd6 sdd7 >
sd 3:0:0:0: [sdd] Attached SCSI disk
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: WDC WD10EZRX-00A8LB0, 01.01A01, max UDMA/133
ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EZRX-00A 01.0 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sde] 4096-byte physical blocks
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde1
sd 5:0:0:0: [sde] Attached SCSI disk
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
raid6: sse2x1    9204 MB/s
raid6: sse2x2   10832 MB/s
raid6: sse2x4   12136 MB/s
raid6: using algorithm sse2x4 (12136 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
   prefetch64-sse: 15497.000 MB/sec
   generic_sse: 13652.000 MB/sec
xor: using function: prefetch64-sse (15497.000 MB/sec)
bio: create slab  at 1
Btrfs loaded, assert=on
BTRFS: device fsid f54a5746-3b68-4b9f-9a44-c4dafca609f8 devid 1 transid 25364 /dev/sdc1
BTRFS: device fsid 576e00eb-dcab-4055-a267-b20c9ea244d8 devid 1 transid 401 /dev/sda3
BTRFS: device fsid 576e00eb-dcab-4055-a267-b20c9ea244d8 devid 1 transid 401 /dev/sda3
BTRFS info (device sda3): disk space caching is enabled
BTRFS: has skinny extents
systemd-journald[103]: Received SIGTERM from PID 1 (systemd).
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
LVM: Activation generator successfully completed.
BTRFS info (device sda3): disk space caching is enabled
systemd-udevd[357]: starting version 210
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
[drm] Initialized drm 1.1.0 20060810
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input6
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:08:00.0: irq 68 for MSI/MSI-X
r8169 0000:08:00.0 eth0: RTL8168c/8111c at 0xffffc9001368c000, 20:cf:30:f1:e4:1d, XID 1c4000c0 IRQ 68
r8169 0000:08:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:07:00.0: irq 69 for MSI/MSI-X
r8169 0000:07:00.0 eth1: RTL8168c/8111c at 0xffffc9001368e000, 20:cf:30:f1:e4:d7, XID 1c4000c0 IRQ 69
r8169 0000:07:00.0 eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
nvidia: module license 'NVIDIA' taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia 0000:05:00.0: enabling device (0000 -> 0003)
vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:05:00.0 on minor 0
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:06:00.0 on minor 1
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  334.21  Thu Feb 27 15:55:45 PST 2014
BTRFS: device fsid f54a5746-3b68-4b9f-9a44-c4dafca609f8 devid 1 transid 25364 /dev/sdc1
snd_hda_intel 0000:00:1b.0: irq 70 for MSI/MSI-X
BTRFS: device fsid f54a5746-3b68-4b9f-9a44-c4dafca609f8 devid 1 transid 25364 /dev/sdc1
BTRFS info (device sdc1): disk space caching is enabled
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
XFS (sde1): Mounting Filesystem
XFS (sdd5): Mounting Filesystem
XFS (sdd6): Mounting Filesystem
XFS (sdd7): Mounting Filesystem
XFS (sde1): Ending clean mount
ALSA hda_auto_parser.c:393 autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
ALSA hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:401    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:402    mono: mono_out=0x0
ALSA hda_auto_parser.c:405    dig-out=0x1b/0x1d
ALSA hda_auto_parser.c:406    inputs:
ALSA hda_auto_parser.c:410      Front Mic=0x14
ALSA hda_auto_parser.c:410      Rear Mic=0x17
ALSA hda_auto_parser.c:410      Line=0x15
ALSA hda_auto_parser.c:410      CD=0x18
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
hda_intel: Disabling MSI
ALSA hda_intel.c:3657 0000:05:00.1: Disabling 64bit DMA
ALSA hda_intel.c:1760 0000:05:00.1: Enable delay in RIRB handling
systemd-udevd[381]: renamed network interface eth0 to enp8s0
systemd-udevd[383]: renamed network interface eth1 to enp7s0
XFS (sdd6): Ending clean mount
XFS (sdd5): Ending clean mount
XFS (sdd7): Ending clean mount
BTRFS: device fsid 576e00eb-dcab-4055-a267-b20c9ea244d8 devid 1 transid 401 /dev/sda3
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:02:00.0/0000:03:02.0/0000:05:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:02:00.0/0000:03:02.0/0000:05:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.0/0000:03:02.0/0000:05:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.0/0000:03:02.0/0000:05:00.1/sound/card1/input16
hda_intel: Disabling MSI
ALSA hda_intel.c:3657 0000:06:00.1: Disabling 64bit DMA
ALSA hda_intel.c:1760 0000:06:00.1: Enable delay in RIRB handling
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:07.0/0000:06:00.1/sound/card2/input23
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:07.0/0000:06:00.1/sound/card2/input22
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:07.0/0000:06:00.1/sound/card2/input21
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/0000:06:00.1/sound/card2/input20
XFS (sda4): Mounting Filesystem
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
WARNING! power/level is deprecated; use power/control instead
XFS (sda7): Mounting Filesystem
usblp 2-4:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0xAC11
usbcore: registered new interface driver usblp
Adding 41945084k swap on /dev/sda1.  Priority:-1 extents:1 across:41945084k FS
XFS (sda11): Mounting Filesystem
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
BTRFS: device fsid 576e00eb-dcab-4055-a267-b20c9ea244d8 devid 1 transid 401 /dev/sda3
BTRFS: device fsid 576e00eb-dcab-4055-a267-b20c9ea244d8 devid 1 transid 401 /dev/sda3
XFS (sda9): Mounting Filesystem
XFS (sda6): Mounting Filesystem
XFS (sda10): Mounting Filesystem
XFS (sda5): Mounting Filesystem
XFS (sda4): Ending clean mount
XFS (sda8): Mounting Filesystem
XFS (sda7): Ending clean mount
XFS (sda9): Ending clean mount
XFS (sda5): Ending clean mount
BTRFS: device fsid 576e00eb-dcab-4055-a267-b20c9ea244d8 devid 1 transid 401 /dev/sda3
BTRFS: device fsid 576e00eb-dcab-4055-a267-b20c9ea244d8 devid 1 transid 401 /dev/sda3
BTRFS: device fsid 576e00eb-dcab-4055-a267-b20c9ea244d8 devid 1 transid 401 /dev/sda3
BTRFS: device fsid 576e00eb-dcab-4055-a267-b20c9ea244d8 devid 1 transid 401 /dev/sda3
BTRFS: device fsid 576e00eb-dcab-4055-a267-b20c9ea244d8 devid 1 transid 401 /dev/sda3
XFS (sda8): Ending clean mount
XFS (sda6): Ending clean mount
XFS (sda11): Ending clean mount
XFS (sda10): Ending clean mount
systemd-journald[334]: Received request to flush runtime journal from PID 1
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
No iBFT detected.
r8169 0000:08:00.0 enp8s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
r8169 0000:07:00.0 enp7s0: link down
r8169 0000:07:00.0 enp7s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
PAX: PMU arbitration service v1.0.1 has been started.
sep3_10: PMU collection driver v3.10.3 (EMON INTERNAL) has been loaded.
sep3_10: Chipset support is enabled.
sep3_10: IDT vector 0x21 will be used for handling PMU interrupts.
r8169 0000:07:00.0 enp7s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
nvidia 0000:05:00.0: irq 71 for MSI/MSI-X
nvidia 0000:06:00.0: irq 72 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia 0000:06:00.0: irq 72 for MSI/MSI-X
hda-codec: out of range cmd 1:5:707:ffffffbf
hda-codec: out of range cmd 2:5:707:ffffffbf
hda-codec: out of range cmd 3:5:707:ffffffbf
fuse init (API version 7.22)
hda-codec: out of range cmd 2:5:707:ffffffff
usb 1-1: USB disconnect, device number 2
usb 2-4: USB disconnect, device number 2
usblp0: removed
perf samples too long (4176 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

Return To SLES12B2Prime System Information