dmesg - john_the_ripper_one
ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq fbs pio
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 67
ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 67
ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 67
ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 67
ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 67
ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 67
ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 67
ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 67
ata9: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
ata12: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3073.634 MHz
Switching to clocksource tsc
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: ST31000528AS, CC3E, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC3E PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 3:0:0:0: [sdc] Attached SCSI disk
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: Optiarc DVD RW AD-7280S, 1.01, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7280S 1.01 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
sd 6:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
sdd: sdd1
sd 6:0:0:0: [sdd] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:0: Attached scsi generic sg3 type 5
sd 6:0:0:0: Attached scsi generic sg4 type 0
scsi 13:0:0:0: Attached scsi generic sg5 type 3
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.25-gentoo.sd05 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.25-gentoo.sd05 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usbcore: registered new interface driver usb-storage
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.25-gentoo.sd05 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.25-gentoo.sd05 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.10.25-gentoo.sd05 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.10.25-gentoo.sd05 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.10.25-gentoo.sd05 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.10.25-gentoo.sd05 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.10.25-gentoo.sd05 xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.10.25-gentoo.sd05 xhci_hcd
usb usb10: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.22)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Loading iSCSI transport class v2.0-870.
EXT3-fs (sdd1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sdd1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-4: new high-speed USB device number 3 using ehci-pci
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA -SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL -XZ)
systemd[1]: Set hostname to .
systemd[1]: Starting Login Prompts.
systemd[1]: Reached target Login Prompts.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
systemd[1]: Reached target Paths.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting Configuration File System...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journald[2475]: Vacuuming done, freed 0 bytes
EXT4-fs (sdd1): re-mounted. Opts: (null)
systemd-udevd[2687]: starting version 208
usb 2-4: New USB device found, idVendor=03f0, idProduct=6c11
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: Photosmart C4400 series
usb 2-4: Manufacturer: HP
usb 2-4: SerialNumber: CN86LFF0HC0557
usb-storage 2-4:1.3: USB Mass Storage device detected
scsi14 : usb-storage 2-4:1.3
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
wmi: Mapper loaded
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ATK0110 ATK0110:00: Overriding interface detection
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
snd_hda_intel 0000:00:1b.0: irq 76 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:01.0 (unregistered net_device): not PCI Express
r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc90010cbe000, bc:ae:c5:0a:5f:bd, XID 18000000 IRQ 19
r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
hda_intel: Disabling MSI
ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input2
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
systemd-udevd[3108]: renamed network interface eth0 to enp7s1
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:03:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.49 Wed Feb 12 20:42:50 PST 2014
Adding 2103484k swap on /dev/sdc2. Priority:-1 extents:1 across:2103484k
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
usb 7-1: new low-speed USB device number 2 using uhci_hcd
usb 7-1: New USB device found, idVendor=05dd, idProduct=a011
usb 7-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 7-1: Product: MINUTEMAN UPS
usb 7-1: Manufacturer: Minuteman
usb 7-1: SerialNumber:
scsi 14:0:0:0: Direct-Access HP Photosmart C4400 1.00 PQ: 0 ANSI: 5
sd 14:0:0:0: Attached scsi generic sg6 type 0
sd 14:0:0:0: [sde] Attached SCSI removable disk
hid-generic 0003:05DD:A011.0001: hiddev0,hidraw0: USB HID v1.11 Device [Minuteman MINUTEMAN UPS ] on usb-0000:00:1d.1-1/input0
systemd-journald[2475]: Received request to flush runtime journal from PID 1
r8169 0000:07:01.0 enp7s1: link down
r8169 0000:07:01.0 enp7s1: link down
IPv6: ADDRCONF(NETDEV_UP): enp7s1: link is not ready
usb 8-1: new low-speed USB device number 2 using uhci_hcd
usb 8-1: New USB device found, idVendor=046d, idProduct=c016
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: Optical USB Mouse
usb 8-1: Manufacturer: Logitech
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
hid-generic 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-1/input0
nvidia 0000:03:00.0: irq 77 for MSI/MSI-X
usb 8-2: new full-speed USB device number 3 using uhci_hcd
usb 8-2: New USB device found, idVendor=1532, idProduct=010d
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Razer BlackWidow Ultimate
usb 8-2: Manufacturer: Razer
input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4
hid-generic 0003:1532:010D.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.2-2/input0
input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input5
hid-generic 0003:1532:010D.0004: input,hidraw3: USB HID v1.11 Device [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.2-2/input1
input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.2/input/input6
hid-generic 0003:1532:010D.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.2-2/input2
r8169 0000:07:01.0 enp7s1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp7s1: link becomes ready
conftest[31757]: segfault at 0 ip 00000000004005e0 sp 00007fffcd39d970 error 4 in conftest[400000+1000]
conftest[31780]: segfault at 0 ip 00007faf40240416 sp 00007fff7bc6fc58 error 4 in libc-2.17.so[7faf4011f000+1a1000]
usb 1-4: new high-speed USB device number 2 using ehci-pci
usb 1-4: New USB device found, idVendor=046d, idProduct=081b
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-4: SerialNumber: F802AFE0
Linux video capture interface: v2.00
uvcvideo: Unable to create debugfs directory
set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device (046d:081b)
input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
i2c /dev entries driver