dmesg - pruebas_ajedrez
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-38-generic (buildd@zirconium) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 (Ubuntu 2.6.32-38.83-generic 2.6.32.52+drm33.21)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.5 present.
last_pfn = 0x3fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003fff0000 (usable)
modified: 000000003fff0000 - 0000000040000000 (ACPI data)
modified: 00000000fffc0000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000377fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 2f893000 - 30033989
ACPI: RSDP 000e0000 00024 (v02 VBOX )
ACPI: XSDT 3fff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 3fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 3fff0410 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 3fff0200 00040
ACPI: SSDT 3fff0240 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
135MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00008e3f18] TEXT DATA BSS ==> [0000100000 - 00008e3f18]
#4 [002f893000 - 0030033989] RAMDISK ==> [002f893000 - 0030033989]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [00008e4000 - 00008e710c] BRK ==> [00008e4000 - 00008e710c]
#7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003fff0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262027
free_area_init_node: node 0, pgdat c079e9c0, node_mem_map c1001000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 272 pages used for memmap
HighMem zone: 34530 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u4194304
pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259979
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 5242560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0003fff0)
Memory: 1017428k/1048512k available (4696k kernel code, 30124k reserved, 2123k data, 664k init, 139208k highmem)
virtual kernel memory layout:
fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc07a9000 - 0xc084f000 ( 664 kB)
.data : 0xc0596257 - 0xc07a8f88 (2123 kB)
.text : 0xc0100000 - 0xc0596257 (4696 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:256
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 1975.198 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3950.39 BogoMIPS (lpj=7900792)
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
mce: CPU supports 0 MCE banks
using mwait in idle threads.
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 19k freed
ACPI: Core revision 20090903
ACPI: setting ELCR to 0200 (from 0e00)
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21817 entries in 43 pages
Enabling APIC mode: Flat. Using 0 I/O APICs
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
APIC calibration not consistent with PM-Timer: 98ms instead of 100ms
APIC delta adjusted to PM-Timer: 6268357 (6182691)
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (3950.39 BogoMIPS).
CPU0 attaching NULL sched-domain.
devtmpfs: initialized
regulator: core version 0.5
Time: 21:02:58 Date: 02/22/14
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20 io port: [0xd000-0xd00f]
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
pci 0000:00:03.0: reg 10 io port: [0xd020-0xd03f]
pci 0000:00:03.0: reg 14 32bit mmio: [0xf0000000-0xf0000fff]
pci 0000:00:03.0: reg 18 32bit mmio: [0xf0080000-0xf00fffff]
pci 0000:00:04.0: reg 10 io port: [0xd040-0xd05f]
pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18 32bit mmio pref: [0xf0800000-0xf0803fff]
pci 0000:00:05.0: reg 10 io port: [0xd100-0xd1ff]
pci 0000:00:05.0: reg 14 io port: [0xd200-0xd23f]
pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 5 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
platform rtc_cmos: registered platform RTC device (no PNP device found)
cpufreq-nforce2: No nForce2 chipset.
Scanning for low memory corruption every 60 seconds
Trying to unpack rootfs image as initramfs...
audit: initializing netlink socket (disabled)
type=2000 audit(1393102978.321:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 1716
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
ACPI: Battery Slot [BAT0] (battery present)
isapnp: Scanning for PnP cards...
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ohci_hcd 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
rtc0: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 41943040 sectors, multi 128: LBA
ata1.01: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 2:817:45
rtc_cmos rtc_cmos: setting system clock to 2014-02-22 21:02:59 UTC (1393102979)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-1: new full speed USB device using ohci_hcd and address 2
isapnp: No Plug & Play device found
Freeing initrd memory: 7810k freed
scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda:
scsi 0:0:1:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 664k freed
Write protecting the kernel text: 4700k
Write protecting the kernel read-only data: 1844k
usb 1-1: configuration #1 chosen from 1 choice
udev: starting version 151
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pcnet32 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
pcnet32 0000:00:03.0: setting latency timer to 64
pcnet32: PCnet/FAST III 79C973 at 0xd020, 08:00:27:05:ae:17 assigned IRQ 10.
pcnet32: Found PHY 0022:561b at address 0.
eth0: registered as PCnet/FAST III 79C973
pcnet32: 1 cards_found.
usbcore: registered new interface driver hiddev
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input4
generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
EXT4-fs (sda2): mounted filesystem with ordered data mode
Adding 1026040k swap on /dev/sda5. Priority:-1 extents:1 across:1026040k
udev: starting version 151
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
lp: driver loaded but no devices found
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
psmouse serio1: ID: 10 00 64
parport_pc 00:04: reported by Plug and Play ACPI
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
type=1505 audit(1393102988.395:2): operation="profile_load" pid=331 name="/sbin/dhclient3"
type=1505 audit(1393102988.395:3): operation="profile_load" pid=331 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1393102988.395:4): operation="profile_load" pid=331 name="/usr/lib/connman/scripts/dhclient-script"
ppdev: user-space parallel port driver
EXT4-fs (sda6): mounted filesystem with ordered data mode
Console: switching to colour frame buffer device 80x30
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Intel ICH 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:05.0: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 60659 usecs (9912 samples)
intel8x0: measured clock 163405 rejected
intel8x0_measure_ac97_clock: measured 55958 usecs (7680 samples)
intel8x0: measured clock 137245 rejected
intel8x0_measure_ac97_clock: measured 55960 usecs (7200 samples)
intel8x0: measured clock 128663 rejected
intel8x0: clocking to 48000
eth0: link up, 100Mbps, full-duplex
type=1505 audit(1393103000.443:5): operation="profile_load" pid=657 name="/usr/share/gdm/guest-session/Xsession"
type=1505 audit(1393103000.591:6): operation="profile_replace" pid=671 name="/sbin/dhclient3"
type=1505 audit(1393103000.591:7): operation="profile_replace" pid=671 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1393103000.591:8): operation="profile_replace" pid=671 name="/usr/lib/connman/scripts/dhclient-script"
type=1505 audit(1393103000.851:9): operation="profile_load" pid=675 name="/usr/bin/evince"
type=1505 audit(1393103000.879:10): operation="profile_load" pid=675 name="/usr/bin/evince-previewer"
type=1505 audit(1393103000.883:11): operation="profile_load" pid=675 name="/usr/bin/evince-thumbnailer"
type=1505 audit(1393103001.071:12): operation="profile_load" pid=682 name="/usr/lib/cups/backend/cups-pdf"
type=1505 audit(1393103001.071:13): operation="profile_load" pid=682 name="/usr/sbin/cupsd"
type=1505 audit(1393103001.091:14): operation="profile_load" pid=683 name="/usr/sbin/tcpdump"
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A