dmesg - sudokut
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-56-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #118-Ubuntu SMP Mon Jan 6 18:51:59 UTC 2014 (Ubuntu 2.6.32-56.118-generic 2.6.32.61+drm33.26)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.5 present.
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000001fff0000 (usable)
modified: 000000001fff0000 - 0000000020000000 (ACPI data)
modified: 00000000fffc0000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-000000001fff0000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 001fc00000 page 2M
001fc00000 - 001fff0000 page 4k
kernel direct mapping tables up to 1fff0000 @ 7000-c000
RAMDISK: 17890000 - 180330bf
ACPI: RSDP 000e0000 00024 (v02 VBOX )
ACPI: XSDT 1fff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 1fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 1fff0410 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 1fff0200 00040
ACPI: SSDT 1fff0240 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1fff0000
low ram: 0 - 1fff0000
node 0 low ram: 00000000 - 1fff0000
node 0 bootmap 00008000 - 0000c000
(9 early reservations) ==> bootmem [0000000000 - 001fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00008e7ef8] TEXT DATA BSS ==> [0000100000 - 00008e7ef8]
#4 [0017890000 - 00180330bf] RAMDISK ==> [0017890000 - 00180330bf]
#5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#6 [00008e8000 - 00008eb10c] BRK ==> [00008e8000 - 00008eb10c]
#7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001fff0
HighMem 0x0001fff0 -> 0x0001fff0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130955
free_area_init_node: node 0, pgdat c07a2800, node_mem_map c1001000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125968 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 20000000:dffc0000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304
pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129931
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 2621120 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 500380k/524224k available (4704k kernel code, 23092k reserved, 2130k data, 664k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc07ad000 - 0xc0853000 ( 664 kB)
.data : 0xc05983b7 - 0xc07acdc8 (2130 kB)
.text : 0xc0100000 - 0xc05983b7 (4704 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:256
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2092.023 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4184.04 BogoMIPS (lpj=8368092)
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
, L1 D cache: 32K
CPU: L2 cache: 6144K
mce: CPU supports 0 MCE banks
using mwait in idle threads.
Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 19k freed
ACPI: Core revision 20090903
ACPI: setting ELCR to 0200 (from 0e00)
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21852 entries in 43 pages
Enabling APIC mode: Flat. Using 0 I/O APICs
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
APIC calibration not consistent with PM-Timer: 102ms instead of 100ms
APIC delta adjusted to PM-Timer: 6069995 (6249745)
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4184.04 BogoMIPS).
CPU0 attaching NULL sched-domain.
devtmpfs: initialized
regulator: core version 0.5
Time: 13:45:46 Date: 02/22/14
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20 io port: [0xd000-0xd00f]
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe0ffffff]
pci 0000:00:03.0: reg 10 32bit mmio: [0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 18 io port: [0xd010-0xd017]
pci 0000:00:04.0: reg 10 io port: [0xd020-0xd03f]
pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18 32bit mmio pref: [0xf0800000-0xf0803fff]
pci 0000:00:05.0: reg 10 io port: [0xd100-0xd1ff]
pci 0000:00:05.0: reg 14 io port: [0xd200-0xd23f]
pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff]
pci 0000:00:0d.0: reg 10 io port: [0xd240-0xd247]
pci 0000:00:0d.0: reg 18 io port: [0xd250-0xd257]
pci 0000:00:0d.0: reg 20 io port: [0xd260-0xd26f]
pci 0000:00:0d.0: reg 24 32bit mmio: [0xf0806000-0xf0807fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 5 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:06.0: PCI INT A disabled
platform rtc_cmos: registered platform RTC device (no PNP device found)
cpufreq-nforce2: No nForce2 chipset.
Scanning for low memory corruption every 60 seconds
Trying to unpack rootfs image as initramfs...
audit: initializing netlink socket (disabled)
type=2000 audit(1393076746.223:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 978
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ata_piix 0000:00:01.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
ata2.00: configured for UDMA/33
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 2:243:787
rtc_cmos rtc_cmos: setting system clock to 2014-02-22 13:45:47 UTC (1393076747)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing initrd memory: 7820k freed
isapnp: No Plug & Play device found
usb 1-1: new full speed USB device using ohci_hcd and address 2
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 664k freed
Write protecting the kernel text: 4708k
Write protecting the kernel read-only data: 1848k
udev: starting version 151
usb 1-1: configuration #1 chosen from 1 choice
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 08:00:27:2e:3a:81
usbcore: registered new interface driver hiddev
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ahci 0000:00:0d.0: version 3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ahci 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input4
generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
scsi2 : ahci
ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 11
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata3.00: 134217728 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 134217728 512-byte logical blocks: (68.7 GB/64.0 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 > sda4
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode
Adding 4562936k swap on /dev/sda6. Priority:-1 extents:1 across:4562936k
udev: starting version 151
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
udev: renamed network interface eth0 to eth2
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
lp: driver loaded but no devices found
parport_pc 00:04: reported by Plug and Play ACPI
psmouse serio1: ID: 10 00 64
type=1505 audit(1393076761.217:2): operation="profile_load" pid=353 name="/sbin/dhclient3"
type=1505 audit(1393076761.301:3): operation="profile_load" pid=353 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1393076761.301:4): operation="profile_load" pid=353 name="/usr/lib/connman/scripts/dhclient-script"
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
ppdev: user-space parallel port driver
Console: switching to colour frame buffer device 80x30
EXT4-fs (sda4): mounted filesystem with ordered data mode
Intel ICH 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
intel8x0_measure_ac97_clock: measured 55801 usecs (7516 samples)
intel8x0: measured clock 134692 rejected
intel8x0_measure_ac97_clock: measured 55745 usecs (7172 samples)
intel8x0: measured clock 128657 rejected
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
type=1505 audit(1393076763.945:5): operation="profile_load" pid=589 name="/usr/share/gdm/guest-session/Xsession"
type=1505 audit(1393076764.013:6): operation="profile_replace" pid=590 name="/sbin/dhclient3"
type=1505 audit(1393076764.013:7): operation="profile_replace" pid=590 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1393076764.013:8): operation="profile_replace" pid=590 name="/usr/lib/connman/scripts/dhclient-script"
intel8x0_measure_ac97_clock: measured 53039 usecs (7381 samples)
intel8x0: measured clock 139161 rejected
intel8x0: clocking to 48000
type=1505 audit(1393076764.297:9): operation="profile_load" pid=593 name="/usr/bin/evince"
type=1505 audit(1393076764.369:10): operation="profile_load" pid=593 name="/usr/bin/evince-previewer"
type=1505 audit(1393076764.418:11): operation="profile_load" pid=593 name="/usr/bin/evince-thumbnailer"
eth2: no IPv6 routers present
hrtimer: interrupt took 12243937 ns