dmesg - test_battery
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-35-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #50-Ubuntu SMP Tue Dec 3 01:24:59 UTC 2013 (Ubuntu 3.8.0-35.50-generic 3.8.13.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000db65efff] usable
BIOS-e820: [mem 0x00000000db65f000-0x00000000db67efff] ACPI data
BIOS-e820: [mem 0x00000000db67f000-0x00000000db76efff] ACPI NVS
BIOS-e820: [mem 0x00000000db76f000-0x00000000dbffffff] reserved
BIOS-e820: [mem 0x00000000dde00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
BIOS-e820: [mem 0x0000000200000000-0x000000021bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. Latitude E5510/023HKR, BIOS A05 09/03/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 base 0DC000000 mask FFC000000 uncachable
4 base 100000000 mask F00000000 write-back
5 base 200000000 mask FE0000000 write-back
6 base 21C000000 mask FFC000000 uncachable
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 512MB, type WB
reg 6, base: 8640MB, range: 64MB, type UC
total RAM covered: 8064M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 512MB, type WB
reg 6, base: 8640MB, range: 64MB, type UC
e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdb65f max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f2360-0x000f236f] mapped at [ffff8800000f2360]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000094000] 94000 size 24576
init_memory_mapping: [mem 0x00000000-0xdb65efff]
[mem 0x00000000-0xdb5fffff] page 2M
[mem 0xdb600000-0xdb65efff] page 4k
kernel direct mapping tables up to 0xdb65efff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[mem 0x100000000-0x1fbffffff] page 2M
kernel direct mapping tables up to 0x1fbffffff @ [mem 0xdb65a000-0xdb65efff]
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
kernel direct mapping tables up to 0x21bffffff @ [mem 0x1fbffe000-0x1fbffffff]
RAMDISK: [mem 0x360de000-0x37066fff]
ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
ACPI: XSDT 00000000db67de18 00064 (v01 DELL E2 06222004 MSFT 00010013)
ACPI: FACP 00000000db75fc18 000F4 (v04 DELL E2 06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20121018/tbfadt-394)
ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40, using 32 (20121018/tbfadt-521)
ACPI: DSDT 00000000db750018 09B4D (v01 DELL E2 00001001 INTL 20080729)
ACPI: FACS 00000000db76bf40 00040
ACPI: APIC 00000000db67cf18 0008C (v02 DELL E2 06222004 MSFT 00010013)
ACPI: MCFG 00000000db76dd18 0003C (v01 A M I GMCH945. 06222004 MSFT 00000097)
ACPI: TCPA 00000000db76dc98 00032 (v02 00000000 00000000)
ACPI: HPET 00000000db76dc18 00038 (v01 DELL E2 00000001 ASL 00000061)
ACPI: BOOT 00000000db76db98 00028 (v01 DELL E2 06222004 AMI 00010013)
ACPI: SLIC 00000000db766818 00176 (v03 DELL E2 06222004 MSFT 00010013)
ACPI: SSDT 00000000db75e018 009F1 (v01 PmRef CpuPm 00003000 INTL 20080729)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021bffffff]
Initmem setup node 0 [mem 0x00000000-0x21bffffff]
NODE_DATA [mem 0x21bffb000-0x21bffffff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880213600000-ffff88021b5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x00099fff]
node 0: [mem 0x00100000-0xdb65efff]
node 0: [mem 0x100000000-0x1fbffffff]
node 0: [mem 0x200000000-0x21bffffff]
On node 0 totalpages: 2045417
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3908 pages, LIFO batch:0
DMA32 zone: 13978 pages used for memmap
DMA32 zone: 880581 pages, LIFO batch:31
Normal zone: 18176 pages used for memmap
Normal zone: 1128704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009a000 - 000000000009b000
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000db65f000 - 00000000db67f000
PM: Registered nosave memory: 00000000db67f000 - 00000000db76f000
PM: Registered nosave memory: 00000000db76f000 - 00000000dc000000
PM: Registered nosave memory: 00000000dc000000 - 00000000dde00000
PM: Registered nosave memory: 00000000dde00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021bc00000 s84928 r8192 d21568 u262144
pcpu-alloc: s84928 r8192 d21568 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013193
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7951888k/8847360k available (7018k kernel code, 665692k absent, 229780k reserved, 6225k data, 1000k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.208 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.41 BogoMIPS (lpj=9576832)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26743 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz (fam: 06, model: 25, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2: Thermal monitoring handled by SMI
CPU3: Thermal monitoring handled by SMI
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19153.66 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdb67f000-0xdb76efff] (983040 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000db7ea918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20080729)
ACPI: SSDT 00000000db7e8018 00842 (v01 PmRef Cpu0Cst 00003001 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00842 (v01 PmRef Cpu0Cst 00003001 INTL 20080729)
ACPI: SSDT 00000000db7e9a98 00303 (v01 PmRef ApIst 00003000 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20080729)
ACPI: SSDT 00000000db7e7d98 00119 (v01 PmRef ApCst 00003000 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20080729)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
_OSC request data:1 8 0
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x8080-0x8087]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf7d70000-0xf7d7000f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7d50000-0xf7d503ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7d40000-0xf7d43fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7d30000-0xf7d303ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x8070-0x8077]
pci 0000:00:1f.2: reg 14: [io 0x8060-0x8063]
pci 0000:00:1f.2: reg 18: [io 0x8050-0x8057]
pci 0000:00:1f.2: reg 1c: [io 0x8040-0x8043]
pci 0000:00:1f.2: reg 20: [io 0x8020-0x803f]
pci 0000:00:1f.2: reg 24: [mem 0xf7d20000-0xf7d207ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7d10000-0xf7d100ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x8000-0x801f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 10: [mem 0xf7d00000-0xf7d00fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xf6900000-0xf7cfffff]
pci 0000:02:00.0: [8086:422c] type 00 class 0x028000
pci 0000:02:00.0: reg 10: [mem 0xf5500000-0xf5501fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.1: bridge window [mem 0xf5500000-0xf68fffff]
pci 0000:03:00.0: [1180:e822] type 00 class 0x080501
pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:03:00.0: reg 10: [mem 0xf2c40000-0xf2c400ff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.4: [1180:e832] type 00 class 0x0c0010
pci 0000:03:00.4: reg 10: [mem 0xf2c00000-0xf2c007ff]
pci 0000:03:00.4: supports D1 D2
pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03-04]
pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf2cfffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0a]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xf4100000-0xf54fffff]
pci 0000:0b:00.0: [14e4:1680] type 00 class 0x020000
pci 0000:0b:00.0: reg 10: [mem 0xf2d10000-0xf2d1ffff 64bit]
pci 0000:0b:00.0: reg 18: [mem 0xf2d00000-0xf2d0ffff 64bit]
pci 0000:0b:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0b]
pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.5: bridge window [mem 0xf2d00000-0xf40fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
_OSC request data:1 1f 0
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [bus 3f]
pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
pci0000:3f: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:3f: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdb65f000-0xdbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x1003] has been reserved
system 00:04: [io 0x1004-0x1013] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
pnp 00:09: Plug and Play ACPI device, IDs DLL0428 PNP0f13 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf7d80000-0xf7d80fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-04] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-0a] add_size 200000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf7e00000-0xf7ffffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xfc200000-0xfc3fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xfc400000-0xfc5fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xfc600000-0xfc7fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xf6900000-0xf7cfffff]
pci 0000:00:1c.0: bridge window [mem 0xf7e00000-0xf7ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.1: bridge window [mem 0xf5500000-0xf68fffff]
pci 0000:00:1c.1: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03-04]
pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf2cfffff]
pci 0000:00:1c.2: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0a]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xf4100000-0xf54fffff]
pci 0000:00:1c.3: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0b]
pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.5: bridge window [mem 0xf2d00000-0xf40fffff]
pci 0000:00:1c.5: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xf6900000-0xf7cfffff]
pci_bus 0000:01: resource 2 [mem 0xf7e00000-0xf7ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xf5500000-0xf68fffff]
pci_bus 0000:02: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf2cfffff]
pci_bus 0000:03: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:05: resource 1 [mem 0xf4100000-0xf54fffff]
pci_bus 0000:05: resource 2 [mem 0xfc400000-0xfc5fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:0b: resource 1 [mem 0xf2d00000-0xf40fffff]
pci_bus 0000:0b: resource 2 [mem 0xfc600000-0xfc7fffff 64bit pref]
pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0c: resource 7 [mem 0xe0000000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15908k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd765a000-0xdb65a000] (64MB) mapped at [ffff8800d765a000-ffff8800db659fff]
Simple Boot Flag at 0xf1 set to 0x1
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1390981659.488:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 15562
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d50000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 17, io mem 0xf7d30000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 8d968bde092d78a8950b64335542be89da868c3b'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:05: setting system clock to 2014-01-29 07:47:40 UTC (1390981660)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 1000k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1164k freed
Freeing unused kernel memory: 1028k freed
udevd[108]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 3)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7d20000 port 0xf7d20100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xf7d20000 port 0xf7d20180 irq 40
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf7d20000 port 0xf7d20380 irq 40
tg3.c:v3.128 (December 03, 2012)
mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
tg3 0000:0b:00.0 eth0: Tigon3 [partno(BCM95761e) rev 5761100] (PCI Express) MAC address f0:4d:a2:aa:eb:bd
tg3 0000:0b:00.0 eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:0b:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0b:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
firewire_ohci 0000:03:00.4: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: WDC WD1600BEVT-75A23T0, 01.01A01, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-7 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, DW50, max UDMA/100
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C DW50 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
firewire_core 0000:03:00.4: created device fw0: GUID 04feee61434fc000, S400
tsc: Refined TSC clocksource calibration: 2393.999 MHz
Switching to clocksource tsc
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c016
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Optical USB Mouse
usb 2-1.1: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5
hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1.1/input0
usb 2-1.2: new low-speed USB device number 4 using ehci-pci
usb 2-1.2: New USB device found, idVendor=413c, idProduct=2106
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Dell QuietKey Keyboard
usb 2-1.2: Manufacturer: Dell
input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.2/input0
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 8180732k swap on /dev/sda5. Priority:-1 extents:1 across:8180732k
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[525]: starting version 175
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 41 for MSI/MSI-X
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
lp: driver loaded but no devices found
[drm] Initialized drm 1.1.0 20060810
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:02:00.0: irq 42 for MSI/MSI-X
wmi: Mapper loaded
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
i915 0000:00:02.0: setting latency timer to 64
parport_pc 00:08: [io 0x0378-0x037b]
parport_pc 00:08: [io 0x0278-0x027b]
parport_pc 00:08: [io 0x03bc-0x03bf]
parport_pc 00:08: [io 0x0378-0x037b]
parport_pc 00:08: [irq 7]
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
input: Dell WMI hotkeys as /devices/virtual/input/input7
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ppdev: user-space parallel port driver
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
parport_pc 00:08: activated
parport_pc 00:08: reported by Plug and Play ACPI
parport_pc 00:08: disabled
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
type=1400 audit(1390981679.764:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=815 comm="apparmor_parser"
type=1400 audit(1390981679.764:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=713 comm="apparmor_parser"
type=1400 audit(1390981679.764:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=712 comm="apparmor_parser"
type=1400 audit(1390981679.764:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=815 comm="apparmor_parser"
type=1400 audit(1390981679.764:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=815 comm="apparmor_parser"
type=1400 audit(1390981679.764:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=713 comm="apparmor_parser"
type=1400 audit(1390981679.764:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=712 comm="apparmor_parser"
type=1400 audit(1390981679.764:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=713 comm="apparmor_parser"
type=1400 audit(1390981679.764:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=712 comm="apparmor_parser"
init: failsafe main process (830) killed by TERM signal
fbcon: inteldrmfb (fb0) is primary device
type=1400 audit(1390981680.028:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=911 comm="apparmor_parser"
init: avahi-cups-reload main process (922) terminated with status 1
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input8
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input9
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:39: registered as cooling_device4
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
init: alsa-restore main process (994) terminated with status 19
input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel MID Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:0b:00.0: irq 45 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
tg3 0000:0b:00.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:0b:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (1899) terminated with status 1
usb 2-1.1: USB disconnect, device number 3
usb 2-1.2: USB disconnect, device number 4
tg3 0000:0b:00.0 eth0: Link is down
tg3 0000:0b:00.0: System wakeup enabled by ACPI
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI: Cannot transition to non-D0 state from D3
serial 00:07: disabled
ACPI: Cannot transition to non-D0 state from D3
PM: suspend of devices complete after 1211.798 msecs
PM: late suspend of devices complete after 0.163 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.733 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
NOHZ: local_softirq_pending 02
Broke affinity for irq 16
Broke affinity for irq 17
Broke affinity for irq 40
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x4
CPU1: Thermal monitoring handled by SMI
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
CPU2: Thermal monitoring handled by SMI
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x5
CPU3: Thermal monitoring handled by SMI
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
sdhci-pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
PM: noirq resume of devices complete after 160.368 msecs
PM: early resume of devices complete after 0.161 msecs
i915 0000:00:02.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: setting latency timer to 64
mei 0000:00:16.0: irq 41 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
tg3 0000:0b:00.0: System wakeup disabled by ACPI
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
firewire_core 0000:03:00.4: rediscovered device fw0
ata2.00: configured for UDMA/100
serial 00:07: activated
Extended CMOS year: 2000
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2356.817 msecs
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:0b:00.0: irq 45 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:0b:00.0: System wakeup enabled by ACPI
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:07: disabled
PM: suspend of devices complete after 1083.801 msecs
PM: late suspend of devices complete after 0.166 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.627 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 16
Broke affinity for irq 17
Broke affinity for irq 40
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x4
CPU1: Thermal monitoring handled by SMI
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
CPU2: Thermal monitoring handled by SMI
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x5
CPU3: Thermal monitoring handled by SMI
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
sdhci-pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
PM: noirq resume of devices complete after 160.383 msecs
PM: early resume of devices complete after 0.186 msecs
i915 0000:00:02.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: setting latency timer to 64
mei 0000:00:16.0: irq 41 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
tg3 0000:0b:00.0: System wakeup disabled by ACPI
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
firewire_core 0000:03:00.4: rediscovered device fw0
ata2.00: configured for UDMA/100
serial 00:07: activated
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2368.474 msecs
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:0b:00.0: irq 45 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:0b:00.0: System wakeup enabled by ACPI
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:07: disabled
PM: suspend of devices complete after 1203.729 msecs
PM: late suspend of devices complete after 0.171 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.626 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 16
Broke affinity for irq 17
Broke affinity for irq 40
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x4
CPU1: Thermal monitoring handled by SMI
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
CPU2: Thermal monitoring handled by SMI
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x5
CPU3: Thermal monitoring handled by SMI
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
sdhci-pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
PM: noirq resume of devices complete after 159.781 msecs
PM: early resume of devices complete after 0.183 msecs
i915 0000:00:02.0: setting latency timer to 64
mei 0000:00:16.0: irq 41 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
tg3 0000:0b:00.0: System wakeup disabled by ACPI
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
firewire_core 0000:03:00.4: rediscovered device fw0
serial 00:07: activated
Extended CMOS year: 2000
ata2.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2318.014 msecs
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:0b:00.0: irq 45 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:0b:00.0: System wakeup enabled by ACPI
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:07: disabled
PM: suspend of devices complete after 1099.758 msecs
PM: late suspend of devices complete after 0.161 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.667 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 16
Broke affinity for irq 17
Broke affinity for irq 40
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x4
CPU1: Thermal monitoring handled by SMI
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
CPU2: Thermal monitoring handled by SMI
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x5
CPU3: Thermal monitoring handled by SMI
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
sdhci-pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
PM: noirq resume of devices complete after 160.738 msecs
PM: early resume of devices complete after 0.160 msecs
i915 0000:00:02.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: setting latency timer to 64
mei 0000:00:16.0: irq 41 for MSI/MSI-X
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
tg3 0000:0b:00.0: System wakeup disabled by ACPI
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
firewire_core 0000:03:00.4: rediscovered device fw0
ata2.00: configured for UDMA/100
serial 00:07: activated
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2317.508 msecs
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:0b:00.0: irq 45 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:0b:00.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:0b:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:0b:00.0 eth0: Link is down
tg3 0000:0b:00.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:0b:00.0 eth0: Flow control is off for TX and off for RX
usb 2-1.2: new low-speed USB device number 5 using ehci-pci
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c016
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Optical USB Mouse
usb 2-1.2: Manufacturer: Logitech
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input17
hid-generic 0003:046D:C016.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1.2/input0
usb 2-1.1: new low-speed USB device number 6 using ehci-pci
usb 2-1.1: New USB device found, idVendor=413c, idProduct=2106
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Dell QuietKey Keyboard
usb 2-1.1: Manufacturer: Dell
input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input18
hid-generic 0003:413C:2106.0004: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.1/input0