dmesg - oh2gxn.tunk.org:X2
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-58-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #88-Ubuntu SMP Tue Dec 3 17:37:58 UTC 2013 (Ubuntu 3.2.0-58.88-generic 3.2.53)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091800 (usable)
[ 0.000000] BIOS-e820: 0000000000091800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf820000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff98000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff98000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A78, BIOS 1206 09/14/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf820 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000008c000] 8c000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf820000
[ 0.000000] 0000000000 - 00cf800000 page 2M
[ 0.000000] 00cf800000 - 00cf820000 page 4k
[ 0.000000] kernel direct mapping tables up to cf820000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ cf81a000-cf820000
[ 0.000000] RAMDISK: 36b8e000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb860 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cff80000 00040 (v01 NEC 20090914 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80200 00084 (v01 091409 FACP2214 20090914 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 00000000cff805d0 0CCE8 (v01 A1236 A1236001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff98000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0007C (v01 091409 APIC2214 20090914 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80410 0003C (v01 091409 OEMMCFG 20090914 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000cff80450 00176 (v01 NEC 20090914 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff98040 00072 (v01 091409 OEMB2214 20090914 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff8f5d0 00038 (v01 091409 OEMHPET 20090914 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff8f610 001C4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000091
[ 0.000000] 0: 0x00000100 -> 0x000cf820
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2095009
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3900 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 829536 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1225728 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf820000 - 00000000cff80000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff98000
[ 0.000000] PM: Registered nosave memory: 00000000cff98000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83136 r8192 d23360 u262144
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059164
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8079976k/9175040k available (6588k kernel code, 795004k absent, 300060k reserved, 6617k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2005.771 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4011.54 BogoMIPS (lpj=8023084)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004043] Security Framework initialized
[ 0.004060] AppArmor: AppArmor initialized
[ 0.004062] Yama: becoming mindful.
[ 0.004852] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011644] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013561] Mount-cache hash table entries: 256
[ 0.013728] Initializing cgroup subsys cpuacct
[ 0.013735] Initializing cgroup subsys memory
[ 0.013746] Initializing cgroup subsys devices
[ 0.013749] Initializing cgroup subsys freezer
[ 0.013751] Initializing cgroup subsys blkio
[ 0.013760] Initializing cgroup subsys perf_event
[ 0.013792] tseg: 0000000000
[ 0.013807] CPU: Physical Processor ID: 0
[ 0.013809] CPU: Processor Core ID: 0
[ 0.013811] mce: CPU supports 5 MCE banks
[ 0.013822] using AMD E400 aware idle routine
[ 0.015551] ACPI: Core revision 20110623
[ 0.022897] ftrace: allocating 26602 entries in 105 pages
[ 0.024467] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064592] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 8c000
[ 0.152099] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152126] Brought up 2 CPUs
[ 0.152129] Total of 2 processors activated (8022.96 BogoMIPS).
[ 0.152584] devtmpfs: initialized
[ 0.154240] EVM: security.selinux
[ 0.154242] EVM: security.SMACK64
[ 0.154244] EVM: security.capability
[ 0.154315] PM: Registering ACPI NVS region at cff98000 (229376 bytes)
[ 0.156052] print_constraints: dummy:
[ 0.156086] RTC time: 21:24:20, date: 01/16/14
[ 0.156136] NET: Registered protocol family 16
[ 0.156244] Trying to unpack rootfs image as initramfs...
[ 0.156306] node 0 link 0: io port [1000, ffffff]
[ 0.156309] TOM: 00000000d0000000 aka 3328M
[ 0.156313] node 0 link 0: mmio [e0000000, efffffff]
[ 0.156316] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.156319] node 0 link 0: mmio [a0000, bffff]
[ 0.156322] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.156325] TOM2: 0000000230000000 aka 8960M
[ 0.156327] bus: [00, 07] on node 0 link 0
[ 0.156330] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.156333] bus: 00 index 1 [mem 0xd0000000-0xffffffff]
[ 0.156336] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.156338] bus: 00 index 3 [mem 0x230000000-0xfcffffffff]
[ 0.156350] ACPI: bus type pci registered
[ 0.156429] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.156432] PCI: not using MMCONFIG
[ 0.156434] PCI: Using configuration type 1 for base access
[ 0.157989] bio: create slab at 0
[ 0.158101] ACPI: Added _OSI(Module Device)
[ 0.158104] ACPI: Added _OSI(Processor Device)
[ 0.158106] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.158108] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.159356] ACPI: EC: Look up EC in DSDT
[ 0.161294] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.224432] ACPI: Interpreter enabled
[ 0.224438] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.224466] ACPI: Using IOAPIC for interrupt routing
[ 0.224498] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.225586] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.260319] ACPI: No dock devices found.
[ 0.260323] HEST: Table not found.
[ 0.260328] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.260439] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.260673] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.260676] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.260679] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.260682] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.260685] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.260688] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.260706] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.260768] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.260811] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.260815] pci 0000:00:02.0: PME# disabled
[ 0.260839] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604
[ 0.260881] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.260885] pci 0000:00:06.0: PME# disabled
[ 0.260923] pci 0000:00:11.0: [1002:4392] type 0 class 0x000104
[ 0.260945] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.260957] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.260968] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.260980] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.260991] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.261003] pci 0000:00:11.0: reg 24: [mem 0xfbdffc00-0xfbdfffff]
[ 0.261069] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.261085] pci 0000:00:12.0: reg 10: [mem 0xfbdfe000-0xfbdfefff]
[ 0.261160] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.261176] pci 0000:00:12.1: reg 10: [mem 0xfbdfd000-0xfbdfdfff]
[ 0.261257] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.261278] pci 0000:00:12.2: reg 10: [mem 0xfbdff800-0xfbdff8ff]
[ 0.261372] pci 0000:00:12.2: supports D1 D2
[ 0.261375] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.261380] pci 0000:00:12.2: PME# disabled
[ 0.261405] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.261421] pci 0000:00:13.0: reg 10: [mem 0xfbdfc000-0xfbdfcfff]
[ 0.261496] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.261511] pci 0000:00:13.1: reg 10: [mem 0xfbdf7000-0xfbdf7fff]
[ 0.261592] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.261614] pci 0000:00:13.2: reg 10: [mem 0xfbdff400-0xfbdff4ff]
[ 0.261708] pci 0000:00:13.2: supports D1 D2
[ 0.261710] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.261715] pci 0000:00:13.2: PME# disabled
[ 0.261747] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.261861] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.261880] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.261891] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.261902] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.261914] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.261925] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.261993] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.262018] pci 0000:00:14.2: reg 10: [mem 0xfbdf0000-0xfbdf3fff 64bit]
[ 0.262093] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.262098] pci 0000:00:14.2: PME# disabled
[ 0.262114] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.262202] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.262251] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.262267] pci 0000:00:14.5: reg 10: [mem 0xfbdf6000-0xfbdf6fff]
[ 0.262346] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.262368] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.262389] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.262408] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.262476] pci 0000:01:00.0: [1002:68d8] type 0 class 0x000300
[ 0.262491] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.262504] pci 0000:01:00.0: reg 18: [mem 0xfbee0000-0xfbefffff 64bit]
[ 0.262513] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.262527] pci 0000:01:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.262562] pci 0000:01:00.0: supports D1 D2
[ 0.262586] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[ 0.262601] pci 0000:01:00.1: reg 10: [mem 0xfbebc000-0xfbebffff 64bit]
[ 0.262665] pci 0000:01:00.1: supports D1 D2
[ 0.268035] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.268040] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.268044] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.268049] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.268100] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.268117] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.268144] pci 0000:02:00.0: reg 18: [mem 0xfbfff000-0xfbffffff 64bit]
[ 0.268176] pci 0000:02:00.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
[ 0.268244] pci 0000:02:00.0: supports D1 D2
[ 0.268247] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.268252] pci 0000:02:00.0: PME# disabled
[ 0.268273] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.268282] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.268287] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.268291] pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.268363] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.268373] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.268381] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.268384] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.268387] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.268391] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.268394] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.268410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.268651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.268697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.268768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.268871] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.268875] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.268877] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.275756] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.275810] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.275862] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.275913] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.275964] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.276027] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.276088] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.276141] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.276301] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.276305] vgaarb: loaded
[ 0.276307] vgaarb: bridge control possible 0000:01:00.0
[ 0.276449] i2c-core: driver [aat2870] using legacy suspend method
[ 0.276451] i2c-core: driver [aat2870] using legacy resume method
[ 0.276553] SCSI subsystem initialized
[ 0.276630] libata version 3.00 loaded.
[ 0.276690] usbcore: registered new interface driver usbfs
[ 0.276705] usbcore: registered new interface driver hub
[ 0.276738] usbcore: registered new device driver usb
[ 0.276860] PCI: Using ACPI for IRQ routing
[ 0.286526] PCI: pci_cache_line_size set to 64 bytes
[ 0.286621] reserve RAM buffer: 0000000000091800 - 000000000009ffff
[ 0.286625] reserve RAM buffer: 00000000cf820000 - 00000000cfffffff
[ 0.286752] NetLabel: Initializing
[ 0.286754] NetLabel: domain hash size = 128
[ 0.286756] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.286772] NetLabel: unlabeled traffic allowed by default
[ 0.286837] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.286843] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.288068] Switching to clocksource hpet
[ 0.298283] AppArmor: AppArmor Filesystem Enabled
[ 0.298319] pnp: PnP ACPI init
[ 0.298342] ACPI: bus type pnp registered
[ 0.298489] pnp 00:00: [bus 00-ff]
[ 0.298493] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.298496] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.298499] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.298502] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.298505] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.298508] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.298511] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.298575] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.298627] pnp 00:01: [dma 4]
[ 0.298629] pnp 00:01: [io 0x0000-0x000f]
[ 0.298632] pnp 00:01: [io 0x0081-0x0083]
[ 0.298634] pnp 00:01: [io 0x0087]
[ 0.298637] pnp 00:01: [io 0x0089-0x008b]
[ 0.298639] pnp 00:01: [io 0x008f]
[ 0.298642] pnp 00:01: [io 0x00c0-0x00df]
[ 0.298681] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.298694] pnp 00:02: [io 0x0070-0x0071]
[ 0.298706] pnp 00:02: [irq 8]
[ 0.298744] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.298755] pnp 00:03: [io 0x0061]
[ 0.298794] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.298806] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.298812] pnp 00:04: [irq 13]
[ 0.298850] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.298903] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.298944] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.299254] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.299260] pnp 00:06: [irq 4]
[ 0.299262] pnp 00:06: [dma 0 disabled]
[ 0.299385] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.299490] pnp 00:07: [io 0x0060]
[ 0.299492] pnp 00:07: [io 0x0064]
[ 0.299495] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.299498] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.299572] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.299576] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.299580] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.299768] pnp 00:08: [io 0x0010-0x001f]
[ 0.299770] pnp 00:08: [io 0x0022-0x003f]
[ 0.299773] pnp 00:08: [io 0x0062-0x0063]
[ 0.299775] pnp 00:08: [io 0x0065-0x006f]
[ 0.299778] pnp 00:08: [io 0x0072-0x007f]
[ 0.299780] pnp 00:08: [io 0x0080]
[ 0.299783] pnp 00:08: [io 0x0084-0x0086]
[ 0.299785] pnp 00:08: [io 0x0088]
[ 0.299787] pnp 00:08: [io 0x008c-0x008e]
[ 0.299790] pnp 00:08: [io 0x0090-0x009f]
[ 0.299792] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.299795] pnp 00:08: [io 0x00b1]
[ 0.299797] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.299800] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.299802] pnp 00:08: [io 0x040b]
[ 0.299804] pnp 00:08: [io 0x04d6]
[ 0.299807] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.299812] pnp 00:08: [io 0x0c14]
[ 0.299815] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.299817] pnp 00:08: [io 0x0c52]
[ 0.299820] pnp 00:08: [io 0x0c6c]
[ 0.299822] pnp 00:08: [io 0x0c6f]
[ 0.299824] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.299827] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.299829] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.299832] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.299834] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.299837] pnp 00:08: [io 0x0800-0x089f]
[ 0.299840] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.299842] pnp 00:08: [io 0x0b00-0x0b0f]
[ 0.299845] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.299847] pnp 00:08: [io 0x0900-0x090f]
[ 0.299850] pnp 00:08: [io 0x0910-0x091f]
[ 0.299852] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.299855] pnp 00:08: [io 0x0060]
[ 0.299857] pnp 00:08: [io 0x0064]
[ 0.299860] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.299863] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.299966] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.299969] system 00:08: [io 0x040b] has been reserved
[ 0.299972] system 00:08: [io 0x04d6] has been reserved
[ 0.299976] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.299979] system 00:08: [io 0x0c14] has been reserved
[ 0.299982] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.299986] system 00:08: [io 0x0c52] has been reserved
[ 0.299989] system 00:08: [io 0x0c6c] has been reserved
[ 0.299992] system 00:08: [io 0x0c6f] has been reserved
[ 0.299995] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.300026] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.300033] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.300036] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.300039] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.300042] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.300046] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 0.300049] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.300052] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.300056] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.300059] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.300063] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.300067] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.300071] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.300183] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.300186] pnp 00:09: [io 0x0290-0x0297]
[ 0.300188] pnp 00:09: [io 0x02a0-0x02af]
[ 0.300254] system 00:09: [io 0x0290-0x0297] has been reserved
[ 0.300258] system 00:09: [io 0x02a0-0x02af] has been reserved
[ 0.300262] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.300600] pnp 00:0a: [io 0x0378-0x037f]
[ 0.300606] pnp 00:0a: [irq 5]
[ 0.300609] pnp 00:0a: [dma 0 disabled]
[ 0.300757] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.300809] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.300870] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.300874] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.301035] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.301038] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.301040] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.301043] pnp 00:0c: [mem 0x00100000-0xcfffffff]
[ 0.301046] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.301119] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.301122] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.301126] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.301130] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.301133] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.301137] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.301269] pnp: PnP ACPI: found 13 devices
[ 0.301271] ACPI: ACPI bus type pnp unregistered
[ 0.308118] PCI: max bus depth: 1 pci_try_num: 2
[ 0.308144] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.308148] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.308152] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.308156] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.308162] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.308165] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.308169] pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.308175] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.308206] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.308211] pci 0000:00:02.0: setting latency timer to 64
[ 0.308218] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.308222] pci 0000:00:06.0: setting latency timer to 64
[ 0.308231] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.308234] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.308237] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.308240] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.308243] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.308246] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.308250] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.308253] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.308256] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.308259] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.308263] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.308266] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.308269] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.308272] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.308276] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.308279] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.308282] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.308335] NET: Registered protocol family 2
[ 0.308628] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.310988] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.314921] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.315436] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.315439] TCP reno registered
[ 0.315460] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.315544] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.315717] NET: Registered protocol family 1
[ 0.315763] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.440029] pci 0000:00:12.0: PCI INT A disabled
[ 0.440039] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.520027] pci 0000:00:12.1: PCI INT A disabled
[ 0.520044] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.520066] pci 0000:00:12.2: PCI INT B disabled
[ 0.520075] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.600024] pci 0000:00:13.0: PCI INT A disabled
[ 0.600034] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.680027] pci 0000:00:13.1: PCI INT A disabled
[ 0.680043] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.680064] pci 0000:00:13.2: PCI INT B disabled
[ 0.680087] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.732744] Freeing initrd memory: 20872k freed
[ 0.760024] pci 0000:00:14.5: PCI INT C disabled
[ 0.760043] pci 0000:01:00.0: Boot video device
[ 0.760052] PCI: CLS 64 bytes, default 64
[ 0.760764] PCI-DMA: Disabling AGP.
[ 0.760856] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.760858] PCI-DMA: using GART IOMMU.
[ 0.760861] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.764856] audit: initializing netlink socket (disabled)
[ 0.764870] type=2000 audit(1389907460.760:1): initialized
[ 0.793384] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.796503] VFS: Disk quotas dquot_6.5.2
[ 0.796582] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.797283] fuse init (API version 7.17)
[ 0.797405] msgmni has been set to 15950
[ 0.797900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.797952] io scheduler noop registered
[ 0.797955] io scheduler deadline registered
[ 0.798001] io scheduler cfq registered (default)
[ 0.798144] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.798181] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.798258] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.798287] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.798386] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.798415] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.798586] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.798592] ACPI: Power Button [PWRB]
[ 0.798658] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.798662] ACPI: Power Button [PWRF]
[ 0.800235] ERST: Table is not found!
[ 0.800237] GHES: HEST is not enabled!
[ 0.820846] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.924722] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.925113] Linux agpgart interface v0.103
[ 0.927015] brd: module loaded
[ 0.928040] loop: module loaded
[ 0.928230] ahci 0000:00:11.0: version 3.0
[ 0.928258] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.928391] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 0.928396] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.929180] scsi0 : ahci
[ 0.929293] scsi1 : ahci
[ 0.929380] scsi2 : ahci
[ 0.929468] scsi3 : ahci
[ 0.929533] ata1: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffd00 irq 22
[ 0.929538] ata2: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffd80 irq 22
[ 0.929542] ata3: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffe00 irq 22
[ 0.929546] ata4: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffe80 irq 22
[ 0.929678] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.929714] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 0.930205] Fixed MDIO Bus: probed
[ 0.930233] tun: Universal TUN/TAP device driver, 1.6
[ 0.930235] tun: (C) 1999-2004 Max Krasnyansky
[ 0.930318] PPP generic driver version 2.4.2
[ 0.930459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.930489] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.930513] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.930593] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.930603] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.930634] QUIRK: Enable AMD PLL fix
[ 0.930637] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.930652] ehci_hcd 0000:00:12.2: debug port 1
[ 0.930679] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbdff800
[ 0.940027] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.940194] hub 1-0:1.0: USB hub found
[ 0.940199] hub 1-0:1.0: 6 ports detected
[ 0.940309] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.940324] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.940383] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.940392] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.940408] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.940423] ehci_hcd 0000:00:13.2: debug port 1
[ 0.940446] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbdff400
[ 0.952023] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.952156] hub 2-0:1.0: USB hub found
[ 0.952160] hub 2-0:1.0: 6 ports detected
[ 0.952260] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.952286] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.952302] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.952372] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.952400] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbdfe000
[ 1.012146] hub 3-0:1.0: USB hub found
[ 1.012154] hub 3-0:1.0: 3 ports detected
[ 1.012248] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.012263] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.012324] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.012345] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbdfd000
[ 1.072142] hub 4-0:1.0: USB hub found
[ 1.072149] hub 4-0:1.0: 3 ports detected
[ 1.072239] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.072255] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.072321] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.072349] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbdfc000
[ 1.132143] hub 5-0:1.0: USB hub found
[ 1.132150] hub 5-0:1.0: 3 ports detected
[ 1.132242] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.132256] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.132320] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.132339] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbdf7000
[ 1.192145] hub 6-0:1.0: USB hub found
[ 1.192153] hub 6-0:1.0: 3 ports detected
[ 1.192244] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.192259] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.192316] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.192335] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbdf6000
[ 1.248045] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.248132] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.252029] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[ 1.252198] hub 7-0:1.0: USB hub found
[ 1.252205] hub 7-0:1.0: 2 ports detected
[ 1.252288] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.252388] usbcore: registered new interface driver libusual
[ 1.252440] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.252840] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.252847] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.252986] mousedev: PS/2 mouse device common for all mice
[ 1.253156] rtc_cmos 00:02: RTC can wake from S4
[ 1.253279] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.253309] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.253415] device-mapper: uevent: version 1.0.3
[ 1.253503] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.253512] cpuidle: using governor ladder
[ 1.253515] cpuidle: using governor menu
[ 1.253517] EFI Variables Facility v0.08 2004-May-17
[ 1.253799] TCP cubic registered
[ 1.253939] NET: Registered protocol family 10
[ 1.254529] NET: Registered protocol family 17
[ 1.254536] Registering the dns_resolver key type
[ 1.254702] PM: Hibernation image not present or could not be loaded.
[ 1.254718] registered taskstats version 1
[ 1.264243] Magic number: 14:772:449
[ 1.264343] rtc_cmos 00:02: setting system clock to 2014-01-16 21:24:21 UTC (1389907461)
[ 1.264352] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2 cpu cores) (version 2.20.00)
[ 1.264392] powernow-k8: fid 0xc (2000 MHz), vid 0xe
[ 1.264394] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 1.264396] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 1.264485] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.264488] EDD information not available.
[ 1.420026] ata3: softreset failed (device not ready)
[ 1.420030] ata3: applying PMP SRST workaround and retrying
[ 1.420050] ata2: softreset failed (device not ready)
[ 1.420055] ata2: applying PMP SRST workaround and retrying
[ 1.592038] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.592067] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.593260] ata3.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[ 1.593264] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.593306] ata2.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[ 1.593309] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.594726] ata3.00: configured for UDMA/133
[ 1.594833] ata2.00: configured for UDMA/133
[ 1.595004] scsi 1:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[ 1.595169] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.595173] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.595193] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.595229] sd 1:0:0:0: [sda] Write Protect is off
[ 1.595233] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.595258] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.595347] scsi 2:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[ 1.595488] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.595493] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.595561] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.595564] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.595584] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.595591] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.639420] sda: sda1 sda2 < sda5 >
[ 1.639834] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.646927] sdb: sdb1 sdb2 < sdb5 >
[ 1.647366] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.649431] Freeing unused kernel memory: 924k freed
[ 1.649815] Write protecting the kernel read-only data: 12288k
[ 1.656515] Freeing unused kernel memory: 1584k freed
[ 1.662108] Freeing unused kernel memory: 1188k freed
[ 1.688135] udevd[94]: starting version 175
[ 1.774280] wmi: Mapper loaded
[ 1.785784] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.785811] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.785842] r8169 0000:02:00.0: setting latency timer to 64
[ 1.785903] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.786423] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000c22000, 90:e6:ba:c0:8b:9e, XID 18000000 IRQ 42
[ 1.786427] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 1.789197] scsi4 : pata_atiixp
[ 1.794537] scsi5 : pata_atiixp
[ 1.795291] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.795295] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.957356] ata5.00: ATAPI: LITE-ON COMBO LTC-48161H, KH0N, max UDMA/33
[ 1.957364] ata5.01: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL03, max UDMA/33
[ 1.958040] ata5.00: configured for UDMA/33
[ 1.972450] ata5.01: configured for UDMA/33
[ 1.975319] scsi 4:0:0:0: CD-ROM LITE-ON COMBO LTC-48161H KH0N PQ: 0 ANSI: 5
[ 1.976400] sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
[ 1.976403] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.976552] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.976714] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 1.980648] scsi 4:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL03 PQ: 0 ANSI: 5
[ 1.984311] ata6.00: ATA-8: ST3320613AS, CC2F, max UDMA/133
[ 1.984315] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.987103] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.987263] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 1.987442] sr 4:0:1:0: Attached scsi generic sg3 type 5
[ 2.040030] usb 4-2: new low-speed USB device number 2 using ohci_hcd
[ 2.043777] ata6.00: configured for UDMA/100
[ 2.043920] scsi 5:0:0:0: Direct-Access ATA ST3320613AS CC2F PQ: 0 ANSI: 5
[ 2.044143] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2.044248] sd 5:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.044371] sd 5:0:0:0: [sdc] Write Protect is off
[ 2.044375] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.044424] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.050476] sdc: sdc1 sdc2 sdc3
[ 2.050844] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 2.141642] device-mapper: table: 252:2: dm-1 too small for target: start=959993856, len=16779264, dev_size=976562432
[ 2.142362] device-mapper: table: 252:2: linear: dm-linear: Device lookup failed
[ 2.142366] device-mapper: ioctl: error adding target to table
[ 2.223390] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input2
[ 2.223660] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.1-2/input0
[ 2.223686] usbcore: registered new interface driver usbhid
[ 2.223689] usbhid: USB HID core driver
[ 2.476027] usb 4-3: new low-speed USB device number 3 using ohci_hcd
[ 2.672419] input: USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input3
[ 2.672539] generic-usb 0003:04D9:0274.0002: input,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.1-3/input0
[ 2.698190] input: USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input4
[ 2.698307] generic-usb 0003:04D9:0274.0003: input,hidraw2: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.1-3/input1
[ 2.960021] usb 5-1: new low-speed USB device number 2 using ohci_hcd
[ 3.153304] generic-usb 0003:0665:5161.0004: hiddev0,hidraw3: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:13.0-1/input0
[ 3.416021] usb 5-3: new full-speed USB device number 3 using ohci_hcd
[ 3.782112] xor: automatically using best checksumming function: generic_sse
[ 3.800012] generic_sse: 6261.000 MB/sec
[ 3.800015] xor: using function: generic_sse (6261.000 MB/sec)
[ 3.800708] device-mapper: dm-raid45: initialized v0.2594b
[ 4.004021] usb 6-1: new full-speed USB device number 2 using ohci_hcd
[ 9.085524] EXT3-fs (dm-0): recovery required on readonly filesystem
[ 9.085528] EXT3-fs (dm-0): write access will be enabled during recovery
[ 14.776474] kjournald starting. Commit interval 5 seconds
[ 14.776651] EXT3-fs (dm-0): recovery complete
[ 14.777561] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 29.181833] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.221845] udevd[572]: starting version 175
[ 29.297362] lp: driver loaded but no devices found
[ 29.398984] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 29.398990] Disabling lock debugging due to kernel taint
[ 29.440049] type=1400 audit(1389900289.669:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=688 comm="apparmor_parser"
[ 29.440643] type=1400 audit(1389900289.673:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=688 comm="apparmor_parser"
[ 29.440975] type=1400 audit(1389900289.673:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=688 comm="apparmor_parser"
[ 29.712439] parport_pc 00:0a: reported by Plug and Play ACPI
[ 29.712508] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 29.724490] Linux video capture interface: v2.00
[ 29.728368] em28xx: New device @ 480 Mbps (eb1a:2710, interface 0, class 0)
[ 29.728505] IR NEC protocol handler initialized
[ 29.729142] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 29.729147] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 29.730039] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 29.730150] em28xx #0: chip ID is em2710
[ 29.730261] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 29.734609] IR RC5(x) protocol handler initialized
[ 29.739083] IR RC6 protocol handler initialized
[ 29.749398] IR JVC protocol handler initialized
[ 29.749995] [fglrx] Maximum main memory to use for locked dma buffers: 7746 MBytes.
[ 29.750134] [fglrx] vendor: 1002 device: 68d8 count: 1
[ 29.750739] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 29.750754] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 29.750761] pci 0000:01:00.0: setting latency timer to 64
[ 29.751250] [fglrx] Kernel PAT support is enabled
[ 29.751274] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 29.756846] IR Sony protocol handler initialized
[ 29.764922] IR MCE Keyboard/mouse protocol handler initialized
[ 29.772183] lirc_dev: IR Remote Control driver registered, major 249
[ 29.772506] IR LIRC bridge handler initialized
[ 29.793342] Bluetooth: Core ver 2.16
[ 29.795214] NET: Registered protocol family 31
[ 29.795219] Bluetooth: HCI device and connection manager initialized
[ 29.795224] Bluetooth: HCI socket layer initialized
[ 29.795226] Bluetooth: L2CAP socket layer initialized
[ 29.795237] Bluetooth: SCO socket layer initialized
[ 29.803774] device-mapper: multipath: version 1.3.1 loaded
[ 29.804127] EXT3-fs (dm-0): using internal journal
[ 29.805039] WARNING! power/level is deprecated; use power/control instead
[ 29.809246] lp0: using parport0 (interrupt-driven).
[ 29.824443] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 29.832299] usbcore: registered new interface driver btusb
[ 29.837944] em28xx #0: board has no eeprom
[ 29.858707] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 29.920603] hda_codec: ALC887: BIOS auto-probing.
[ 29.944650] MCE: In-kernel MCE decoding enabled.
[ 29.944737] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 29.944888] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 29.945017] input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 29.945141] input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 29.945265] input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 29.945389] input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 29.945918] EDAC MC: Ver: 2.1.0
[ 29.946276] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 29.946354] snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
[ 29.946379] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 29.946416] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 29.956280] AMD64 EDAC driver v3.4.0
[ 29.956428] EDAC amd64: DRAM ECC disabled.
[ 29.956438] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 29.956440] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 29.956442] (Note that use of the override may cause unknown side effects.)
[ 29.985156] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 29.985260] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 30.080046] em28xx #0: Sensor is mt9v011, using model Silvercrest Webcam 1.3mpix entry.
[ 30.080061] em28xx #0: Identified as Silvercrest Webcam 1.3mpix (card=71)
[ 30.123918] type=1400 audit(1389900290.353:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=731 comm="apparmor_parser"
[ 30.145945] mt9v011 0-005d: chip found @ 0xba (em28xx #0 - chip version 0x8232)
[ 30.150339] em28xx #0: Config register raw data: 0x00
[ 30.296149] ppdev: user-space parallel port driver
[ 30.337876] device-mapper: table: 252:2: dm-1 too small for target: start=959993856, len=16779264, dev_size=976562432
[ 30.340424] device-mapper: table: 252:2: linear: dm-linear: Device lookup failed
[ 30.340454] device-mapper: ioctl: error adding target to table
[ 30.532331] em28xx #0: v4l2 driver version 0.1.3
[ 30.648142] FAT-fs (sdc3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 30.928116] em28xx #0: V4L2 video device registered as video0
[ 30.928241] usbcore: registered new interface driver em28xx
[ 30.928244] em28xx driver loaded
[ 31.672998] init: udev-fallback-graphics main process (1231) terminated with status 1
[ 36.785136] init: failsafe main process (1254) killed by TERM signal
[ 36.842458] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.842463] Bluetooth: BNEP filters: protocol multicast
[ 36.883691] Bluetooth: RFCOMM TTY layer initialized
[ 36.883699] Bluetooth: RFCOMM socket layer initialized
[ 36.883702] Bluetooth: RFCOMM ver 1.11
[ 36.900987] type=1400 audit(1389900297.133:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1348 comm="apparmor_parser"
[ 36.908180] type=1400 audit(1389900297.141:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1348 comm="apparmor_parser"
[ 36.926564] type=1400 audit(1389900297.157:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1367 comm="apparmor_parser"
[ 36.927488] type=1400 audit(1389900297.157:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1367 comm="apparmor_parser"
[ 36.927826] type=1400 audit(1389900297.157:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1367 comm="apparmor_parser"
[ 36.933673] type=1400 audit(1389900297.165:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1369 comm="apparmor_parser"
[ 36.938102] type=1400 audit(1389900297.169:12): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1369 comm="apparmor_parser"
[ 36.943866] type=1400 audit(1389900297.173:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1370 comm="apparmor_parser"
[ 36.944260] type=1400 audit(1389900297.177:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1370 comm="apparmor_parser"
[ 36.950625] type=1400 audit(1389900297.181:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=1372 comm="apparmor_parser"
[ 37.033953] r8169 0000:02:00.0: eth0: link down
[ 37.033962] r8169 0000:02:00.0: eth0: link down
[ 37.035162] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.035573] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.566612] platform lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0
[ 37.972628] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[ 37.973830] [fglrx] Firegl kernel thread PID: 1563
[ 37.973957] [fglrx] Firegl kernel thread PID: 1564
[ 37.974115] [fglrx] Firegl kernel thread PID: 1565
[ 37.974262] [fglrx] IRQ 44 Enabled
[ 38.100481] [fglrx] Gart USWC size:1280 M.
[ 38.100485] [fglrx] Gart cacheable size:508 M.
[ 38.100491] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 38.100494] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[ 38.100497] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 38.641427] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 38.646881] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 38.689752] r8169 0000:02:00.0: eth0: link up
[ 38.690904] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 43.139919] init: plymouth-stop pre-start process (2374) terminated with status 1
[ 49.536019] eth0: no IPv6 routers present