dmesg - test2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-15-generic (buildd@batsu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #23-Ubuntu SMP Mon Dec 9 18:17:04 UTC 2013 (Ubuntu 3.11.0-15.23-generic 3.11.10)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cffaffff] usable
BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffbdfff] ACPI data
BIOS-e820: [mem 0x00000000cffbe000-0x00000000cffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001afffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: System manufacturer System Product Name/M2R32-MVP, BIOS 1109 09/22/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 00000001b0000000 aka 6912M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x1afe00000-0x1afffffff]
[mem 0x1afe00000-0x1afffffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x1ac000000-0x1afdfffff]
[mem 0x1ac000000-0x1afdfffff] page 2M
init_memory_mapping: [mem 0x180000000-0x1abffffff]
[mem 0x180000000-0x1abffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcffaffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcffaffff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
[mem 0x100000000-0x17fffffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
RAMDISK: [mem 0x35eae000-0x36f4efff]
ACPI: RSDP 00000000000fb930 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cffb0100 00054 (v01 A_M_I_ OEMXSDT 09000922 MSFT 00000097)
ACPI: FACP 00000000cffb0290 000F4 (v03 A_M_I_ OEMFACP 09000922 MSFT 00000097)
ACPI: DSDT 00000000cffb0440 07CDC (v01 A0578 A0578000 00000000 INTL 20060113)
ACPI: FACS 00000000cffbe000 00040
ACPI: APIC 00000000cffb0390 0006C (v01 A_M_I_ OEMAPIC 09000922 MSFT 00000097)
ACPI: MCFG 00000000cffb0400 0003C (v01 A_M_I_ OEMMCFG 09000922 MSFT 00000097)
ACPI: OEMB 00000000cffbe040 00060 (v01 A_M_I_ AMI_OEM 09000922 MSFT 00000097)
ACPI: HPET 00000000cffb8120 00038 (v01 A_M_I_ OEMHPET 09000922 MSFT 00000097)
ACPI: SSDT 00000000cffb8160 00350 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001afffffff]
Initmem setup node 0 [mem 0x00000000-0x1afffffff]
NODE_DATA [mem 0x1afff7000-0x1afffbfff]
[ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a9600000-ffff8801af5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1afffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcffaffff]
node 0: [mem 0x100000000-0x1afffffff]
On node 0 totalpages: 1572686
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13247 pages used for memmap
DMA32 zone: 847792 pages, LIFO batch:31
Normal zone: 11264 pages used for memmap
Normal zone: 720896 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcffb0000-0xcffbdfff]
PM: Registered nosave memory: [mem 0xcffbe000-0xcffdffff]
PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xff6fffff]
PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
e820: [mem 0xd0000000-0xff6fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff8801afc00000 s86720 r8192 d23872 u524288
pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1548090
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ c4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 6026772K/6290744K available (7149K kernel code, 1082K rwdata, 3312K rodata, 1364K init, 1420K bss, 263972K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 2 loops
tsc: Detected 3106.676 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 6213.35 BogoMIPS (lpj=12426704)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27844 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (fam: 0f, model: 6b, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (12427.46 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcffbe000-0xcffdffff] (139264 bytes)
regulator-dummy: no parameters
RTC time: 10:29:50, date: 01/25/14
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, ffffffff]
TOM2: 00000001b0000000 aka 6912M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xd0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x1b0000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [1002:5952] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a34] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a37] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
pci 0000:00:12.0: reg 0x10: [io 0xb000-0xb007]
pci 0000:00:12.0: reg 0x14: [io 0xa000-0xa003]
pci 0000:00:12.0: reg 0x18: [io 0x9000-0x9007]
pci 0000:00:12.0: reg 0x1c: [io 0x8000-0x8003]
pci 0000:00:12.0: reg 0x20: [io 0x7000-0x700f]
pci 0000:00:12.0: reg 0x24: [mem 0xfbcffc00-0xfbcfffff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfbcfe000-0xfbcfefff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfbcfd000-0xfbcfdfff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
pci 0000:00:13.2: reg 0x10: [mem 0xfbcfc000-0xfbcfcfff]
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
pci 0000:00:13.3: reg 0x10: [mem 0xfbcfb000-0xfbcfbfff]
pci 0000:00:13.3: System wakeup disabled by ACPI
pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
pci 0000:00:13.4: reg 0x10: [mem 0xfbcfa000-0xfbcfafff]
pci 0000:00:13.4: System wakeup disabled by ACPI
pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
pci 0000:00:13.5: reg 0x10: [mem 0xfbcff800-0xfbcff8ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
pci 0000:00:14.0: reg 0x14: [mem 0xfed00000-0xfed003ff]
pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfbcf4000-0xfbcf7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:00.0: [1002:6819] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfbdc0000-0xfbdfffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfbda0000-0xfbdbffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfbd9c000-0xfbd9ffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [197b:2360] type 00 class 0x010185
pci 0000:02:00.0: reg 0x10: [io 0xdc00-0xdc07]
pci 0000:02:00.0: reg 0x14: [io 0xd880-0xd883]
pci 0000:02:00.0: reg 0x18: [io 0xd800-0xd807]
pci 0000:02:00.0: reg 0x1c: [io 0xd480-0xd483]
pci 0000:02:00.0: reg 0x20: [io 0xd400-0xd40f]
pci 0000:02:00.0: reg 0x24: [mem 0xfbefe000-0xfbefffff]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:03:03.0: [1106:3044] type 00 class 0x0c0010
pci 0000:03:03.0: reg 0x10: [mem 0xfbfff800-0xfbffffff]
pci 0000:03:03.0: reg 0x14: [io 0xec00-0xec7f]
pci 0000:03:03.0: supports D2
pci 0000:03:03.0: PME# supported from D2 D3hot D3cold
pci 0000:03:04.0: [11ab:4320] type 00 class 0x020000
pci 0000:03:04.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff]
pci 0000:03:04.0: reg 0x14: [io 0xe800-0xe8ff]
pci 0000:03:04.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
pci 0000:03:04.0: supports D1 D2
pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
pci 0000:00:14.4: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcffb0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] could not be reserved
system 00:05: [io 0x0b10-0x0b1f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [io 0xfe00-0xfefe] has been reserved
system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
system 00:05: [mem 0xff600000-0xff60ffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [io 0x0e00-0x0e0f] has been reserved
system 00:0b: [io 0x0e80-0x0e8f] has been reserved
system 00:0b: [io 0x0f40-0x0f4f] has been reserved
system 00:0b: [io 0x0a30-0x0a3f] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
pci 0000:00:14.4: bridge window [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17028K (ffff880035eae000 - ffff880036f4f000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1390645790.936:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 11933
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: duty_cycle spans bit 4
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:13.5: EHCI Host Controller
ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.5: debug port 1
ehci-pci 0000:00:13.5: irq 19, io mem 0xfbcff800
ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:13.0: irq 16, io mem 0xfbcfe000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.11.0-15-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:13.1: irq 17, io mem 0xfbcfd000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.11.0-15-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-pci 0000:00:13.2: OHCI PCI host controller
ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.2: irq 18, io mem 0xfbcfc000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.11.0-15-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci-pci 0000:00:13.3: OHCI PCI host controller
ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.3: irq 17, io mem 0xfbcfb000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.11.0-15-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci-pci 0000:00:13.4: OHCI PCI host controller
ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.4: irq 18, io mem 0xfbcfa000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.11.0-15-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9da89dd2daeca3a3cb171fe18502208f132adef8'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 14:831:477
rtc_cmos 00:01: setting system clock to 2014-01-25 10:29:51 UTC (1390645791)
powernow-k8: fid 0x17 (3100 MHz), vid 0x6
powernow-k8: fid 0x16 (3000 MHz), vid 0x7
powernow-k8: fid 0x14 (2800 MHz), vid 0x9
powernow-k8: fid 0x12 (2600 MHz), vid 0xb
powernow-k8: fid 0x10 (2400 MHz), vid 0xd
powernow-k8: fid 0xe (2200 MHz), vid 0xf
powernow-k8: fid 0xc (2000 MHz), vid 0x11
powernow-k8: fid 0xa (1800 MHz), vid 0x11
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1032K (ffff8800016fe000 - ffff880001800000)
Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
systemd-udevd[104]: starting version 204
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd00 irq 21
ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 21
ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 21
ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 21
pata_atiixp 0000:00:14.1: setting latency timer to 64
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi5 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 17
scsi4 : pata_atiixp
skge: 1.14 addr 0xfbff8000 irq 23 chip Yukon-Lite rev 9
skge 0000:03:04.0 eth0: addr 00:1b:fc:f7:a7:83
scsi6 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
FDC 0 is a post-1991 82077
firewire_ohci 0000:03:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata5.00: ATA-7: Maxtor 6Y080P0, YAR41BW0, max UDMA/133
ata5.00: 160086528 sectors, multi 16: LBA
ata5.01: ATAPI: _NEC DVD_RW ND-3500AG, 2.1B, max UDMA/33
ata5.00: configured for UDMA/100
ata5.01: configured for UDMA/33
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb 1-4: new high-speed USB device number 4 using ehci-pci
ata2: softreset failed (device not ready)
ata2: applying PMP SRST workaround and retrying
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
firewire_core 0000:03:03.0: created device fw0: GUID fedcba9876543210, S400
usb 1-4: New USB device found, idVendor=041e, idProduct=4083
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: VF0640 Live! Cam Socialize
usb 1-4: Manufacturer: Creative Labs
usb 1-4: SerialNumber: 0G050258
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
ata1.00: ATA-9: ST1000DX001-1CM162, CC43, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000DX001-1CM1 CC43 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 4:0:0:0: Direct-Access ATA Maxtor 6Y080P0 YAR4 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sda: sda1 sda2
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 4:0:1:0: CD-ROM _NEC DVD_RW ND-3500AG 2.1B PQ: 0 ANSI: 5
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc2 sdc3
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:1:0: Attached scsi CD-ROM sr0
sr 4:0:1:0: Attached scsi generic sg3 type 5
sd 4:0:0:0: [sdc] Attached SCSI disk
usb 3-1: new full-speed USB device number 2 using ohci-pci
usb 3-1: New USB device found, idVendor=04b8, idProduct=082f
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: USB MFP
usb 3-1: Manufacturer: EPSON
usb 3-1: SerialNumber: HU66S0702061205110
EXT4-fs (sdc2): INFO: recovery required on readonly filesystem
EXT4-fs (sdc2): write access will be enabled during recovery
usb 2-2: new full-speed USB device number 2 using ohci-pci
usb 2-2: New USB device found, idVendor=046d, idProduct=c52b
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Receiver
usb 2-2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-2/input2
input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/input/input2
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:13.0-2:2
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/input/input3
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:13.0-2:3
EXT4-fs (sdc2): recovery complete
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
Adding 4715072k swap on /dev/sdc3. Priority:-1 extents:1 across:4715072k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[288]: starting version 204
lp: driver loaded but no devices found
it87: Found IT8726F chip at 0xe80, revision 1
ACPI Warning: 0x0000000000000e85-0x0000000000000e86 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.ECRE 1 (20130517/utaddress-251)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro
asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x13
sp5100_tco: failed to find MMIO address, giving up.
WARNING! power/level is deprecated; use power/control instead
MCE: In-kernel MCE decoding enabled.
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usblp 3-1:1.1: usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x082F
usbcore: registered new interface driver usblp
microcode: AMD CPU family 0xf not supported
microcode: AMD CPU family 0xf not supported
kvm: Nested Virtualization enabled
Linux video capture interface: v2.00
hda-intel 0000:00:14.2: Using LPIB position fix
snd_hda_intel 0000:00:14.2: irq 42 for MSI/MSI-X
hda-intel 0000:00:14.2: Enable sync_write for stable communication
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device VF0640 Live! Cam Socialize (041e:4083)
input: VF0640 Live! Cam Socialize as /devices/pci0000:00/0000:00:13.5/usb1/1-4/1-4:1.0/input/input4
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
hda_codec: AD1988: BIOS auto-probing.
autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1b/0x0
inputs:
Front Mic=0x14
Rear Mic=0x17
Line=0x15
Line=0x1a
CD=0x18
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
hda-intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or required key missing - tainting kernel
[fglrx] Maximum main memory to use for locked dma buffers: 5772 MBytes.
[fglrx] vendor: 1002 device: 6819 count: 1
[fglrx] ioport: bar 4, base 0xc000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors
type=1400 audit(1390642204.507:2): apparmor="STATUS" operation="profile_load" parent=422 profile="unconfined" name="/sbin/dhclient" pid=423 comm="apparmor_parser"
type=1400 audit(1390642204.507:3): apparmor="STATUS" operation="profile_load" parent=422 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=423 comm="apparmor_parser"
type=1400 audit(1390642204.507:4): apparmor="STATUS" operation="profile_load" parent=422 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=423 comm="apparmor_parser"
type=1400 audit(1390642204.507:5): apparmor="STATUS" operation="profile_replace" parent=464 profile="unconfined" name="/sbin/dhclient" pid=465 comm="apparmor_parser"
type=1400 audit(1390642204.507:6): apparmor="STATUS" operation="profile_replace" parent=464 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=465 comm="apparmor_parser"
type=1400 audit(1390642204.507:7): apparmor="STATUS" operation="profile_replace" parent=464 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=465 comm="apparmor_parser"
type=1400 audit(1390642204.507:8): apparmor="STATUS" operation="profile_replace" parent=422 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=423 comm="apparmor_parser"
type=1400 audit(1390642204.507:9): apparmor="STATUS" operation="profile_replace" parent=422 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=423 comm="apparmor_parser"
type=1400 audit(1390642204.507:10): apparmor="STATUS" operation="profile_replace" parent=464 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=465 comm="apparmor_parser"
type=1400 audit(1390642204.507:11): apparmor="STATUS" operation="profile_replace" parent=464 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=465 comm="apparmor_parser"
init: failsafe main process (537) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-cups-reload main process (719) terminated with status 1
ppdev: user-space parallel port driver
vesafb: mode is 800x600x32, linelength=3328, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011600000, using 1984k, total 1984k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
skge 0000:03:04.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
skge 0000:03:04.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1107
[fglrx] Firegl kernel thread PID: 1108
[fglrx] Firegl kernel thread PID: 1109
[fglrx] IRQ 44 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[fglrx] Reserved FB block: Unshared offset:3ffef000, size:11000
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
systemd-hostnamed[2152]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[4478]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[5986]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[6340]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
init: upstart-udev-bridge main process (283) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (386) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (552) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000