dmesg - yah
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009d5bcfff] usable
BIOS-e820: [mem 0x000000009d5bd000-0x000000009d748fff] reserved
BIOS-e820: [mem 0x000000009d749000-0x000000009d758fff] ACPI data
BIOS-e820: [mem 0x000000009d759000-0x000000009dab9fff] ACPI NVS
BIOS-e820: [mem 0x000000009daba000-0x000000009e66ffff] reserved
BIOS-e820: [mem 0x000000009e670000-0x000000009e670fff] usable
BIOS-e820: [mem 0x000000009e671000-0x000000009e876fff] ACPI NVS
BIOS-e820: [mem 0x000000009e877000-0x000000009ec95fff] usable
BIOS-e820: [mem 0x000000009ec96000-0x000000009eff3fff] reserved
BIOS-e820: [mem 0x000000009eff4000-0x000000009effffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/F2A55-M, BIOS 5302 01/30/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 00009F000000 mask FFFFFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000013f000000 aka 5104M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2544MB, range: 16MB, type UC
total RAM covered: 2544M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2544MB, range: 16MB, type UC
e820: update [mem 0x9f000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x13ee00000-0x13effffff]
[mem 0x13ee00000-0x13effffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13edfffff]
[mem 0x13c000000-0x13edfffff] page 2M
init_memory_mapping: [mem 0x100001000-0x13bffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13bffffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x9d5bcfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x9d3fffff] page 2M
[mem 0x9d400000-0x9d5bcfff] page 4k
init_memory_mapping: [mem 0x9e670000-0x9e670fff]
[mem 0x9e670000-0x9e670fff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x9e877000-0x9ec95fff]
[mem 0x9e877000-0x9e9fffff] page 4k
[mem 0x9ea00000-0x9ebfffff] page 2M
[mem 0x9ec00000-0x9ec95fff] page 4k
init_memory_mapping: [mem 0x9eff4000-0x9effffff]
[mem 0x9eff4000-0x9effffff] page 4k
RAMDISK: [mem 0x350da000-0x36864fff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 000000009d750078 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000009d756e50 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
ACPI: DSDT 000000009d750170 06CDB (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 000000009dab1080 00040
ACPI: APIC 000000009d756f60 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000009d756fd8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000009d757020 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: IVRS 000000009d7582e8 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
ACPI: HPET 000000009d7570b8 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 000000009d7570f0 00D40 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 000000009d757e30 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013effffff]
Initmem setup node 0 [mem 0x00000000-0x13effffff]
NODE_DATA [mem 0x13eff6000-0x13effafff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x9d5bcfff]
node 0: [mem 0x9e670000-0x9e670fff]
node 0: [mem 0x9e877000-0x9ec95fff]
node 0: [mem 0x9eff4000-0x9effffff]
node 0: [mem 0x100001000-0x13effffff]
On node 0 totalpages: 903557
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 10024 pages used for memmap
DMA32 zone: 641513 pages, LIFO batch:31
Normal zone: 4032 pages used for memmap
Normal zone: 258047 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9d5bd000-0x9d748fff]
PM: Registered nosave memory: [mem 0x9d749000-0x9d758fff]
PM: Registered nosave memory: [mem 0x9d759000-0x9dab9fff]
PM: Registered nosave memory: [mem 0x9daba000-0x9e66ffff]
PM: Registered nosave memory: [mem 0x9e671000-0x9e876fff]
PM: Registered nosave memory: [mem 0x9ec96000-0x9eff3fff]
PM: Registered nosave memory: [mem 0x9f000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0x9f000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88013ec00000 s86720 r8192 d23872 u524288
pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 889416
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 94000000
PM: Registered nosave memory: [mem 0x94000000-0x97ffffff]
Memory: 3384128K/3614228K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 230100K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4321.529 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8643.05 BogoMIPS (lpj=17286116)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 009f000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27796 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-5800K APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (34572.23 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9d759000-0x9dab9fff] (3543040 bytes)
PM: Registering ACPI NVS region [mem 0x9e671000-0x9e876fff] (2121728 bytes)
regulator-dummy: no parameters
RTC time: 13:53:20, date: 01/13/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A03:00: ACPI _OSC control (0x18) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
pci 0000:00:01.0: [1002:9901] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb4c000-0xfeb4c7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:15.1: PCI bridge to [bus 03]
pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfea00000-0xfea07fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9d5bd000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e671000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9ec96000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0300-0x031f] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: [io 0x0230-0x023f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0a: [mem 0xa0000000-0xbfffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:14.4: PCI bridge to [bus 01]
pci 0000:00:15.0: PCI bridge to [bus 02]
pci 0000:00:15.1: PCI bridge to [bus 03]
pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2: bridge window [mem 0xfea00000-0xfeafffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:01: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:01: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:01: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 24108K (ffff8800350da000 - ffff880036865000)
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features: PreF PPR GT IA
AMD-Vi: Interrupt remapping enabled
pci 0000:00:00.2: irq 40 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x995bd000-0x9d5bd000] (64MB) mapped at [ffff8800995bd000-ffff88009d5bcfff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1389621199.820:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 6656
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4a000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb48000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 14:661:887
rtc_cmos 00:04: setting system clock to 2014-01-13 13:53:21 UTC (1389621201)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
systemd-udevd[118]: starting version 204
libahci: module verification failed: signature and/or required key missing - tainting kernel
wmi: Mapper loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 46 for MSI/MSI-X
ahci 0000:00:11.0: irq 47 for MSI/MSI-X
ahci 0000:00:11.0: irq 48 for MSI/MSI-X
ahci 0000:00:11.0: irq 49 for MSI/MSI-X
ahci 0000:00:11.0: irq 50 for MSI/MSI-X
ahci 0000:00:11.0: irq 51 for MSI/MSI-X
ahci 0000:00:11.0: irq 52 for MSI/MSI-X
ahci 0000:00:11.0: irq 53 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c100 irq 46
ata2: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c180 irq 47
ata3: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c200 irq 48
ata4: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c280 irq 49
ata5: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c300 irq 50
ata6: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c380 irq 51
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4b000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 54 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffc9000064e000, 50:46:5d:68:0b:a9, XID 08000800 IRQ 54
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:12.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb49000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATAPI: ATAPI iHAS322 8, 3L11, max UDMA/100
ata1.00: ATA-8: ST3160318AS, HP35, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3160318AS HP35 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM ATAPI iHAS322 8 3L11 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 4321.499 MHz
usb 6-1: new low-speed USB device number 2 using ohci-pci
usb 6-1: New USB device found, idVendor=045e, idProduct=0750
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Wired Keyboard 600
usb 6-1: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:13.0/usb6/6-1/6-1:1.0/input/input2
hid-generic 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:13.0-1/input0
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:13.0/usb6/6-1/6-1:1.1/input/input3
hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:13.0-1/input1
usb 5-3: new full-speed USB device number 2 using ohci-pci
usb 5-3: New USB device found, idVendor=04f2, idProduct=1013
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: USB Wireless HID Receiver
usb 5-3: Manufacturer: Chicony
input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.0/input/input4
hid-generic 0003:04F2:1013.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:12.0-3/input0
input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.1/input/input5
hid-generic 0003:04F2:1013.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:12.0-3/input1
Switched to clocksource tsc
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010900000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
usb 5-4: new full-speed USB device number 3 using ohci-pci
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 5-4: New USB device found, idVendor=0c76, idProduct=1600
usb 5-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-4: Product: USB PnP Audio Device
input: USB PnP Audio Device as /devices/pci0000:00/0000:00:12.0/usb5/5-4/5-4:1.3/input/input6
hid-generic 0003:0C76:1600.0005: input,hidraw4: USB HID v1.00 Device [USB PnP Audio Device] on usb-0000:00:12.0-4/input3
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 2044k swap on /dev/sda5. Priority:-1 extents:1 across:2044k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[346]: starting version 204
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
lp: driver loaded but no devices found
microcode: CPU0: patch_level=0x06001116
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
microcode: CPU0: new patch_level=0x06001119
microcode: CPU1: patch_level=0x06001116
microcode: CPU2: patch_level=0x06001116
microcode: CPU2: new patch_level=0x06001119
microcode: CPU3: patch_level=0x06001116
microcode: Microcode Update Driver: v2.00 , Peter Oruba
AMD IOMMUv2 driver by Joerg Roedel
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
hda-intel 0000:00:01.1: Using LPIB position fix
hda-intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 55 for MSI/MSI-X
hda-intel 0000:00:01.1: Enable sync_write for stable communication
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0887
input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
usbcore: registered new interface driver snd-usb-audio
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input14
asus_wmi: Disabling ACPI video driver
init: failsafe main process (552) killed by TERM signal
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3180 MBytes.
[fglrx] vendor: 1002 device: 9901 count: 1
[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors
init: avahi-cups-reload main process (713) terminated with status 1
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (1554) terminated with status 1
fglrx_pci 0000:00:01.0: irq 56 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1571
[fglrx] Firegl kernel thread PID: 1572
[fglrx] Firegl kernel thread PID: 1573
[fglrx] IRQ 56 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc52000, size:3ae000
[fglrx] Reserved FB block: Unshared offset:1ffee000, size:12000
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
usb 6-1: USB disconnect, device number 2
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
X-Plane-i686[27223]: segfault at 0 ip 00000000f5d9b69c sp 00000000ff95bafc error 4 in fglrx_dri.so[f4bb0000+22d7000]
X-Plane-i686[27297]: segfault at 0 ip 00000000f5e1b69c sp 00000000ffd5e4fc error 4 in fglrx_dri.so[f4c30000+22d7000]
X-Plane-i686[27301]: segfault at 0 ip 00000000f5e2b69c sp 00000000ffc12ce4 error 4 in fglrx_dri.so[f4c40000+22d7000]
X-Plane-i686[27305]: segfault at 0 ip 00000000f5e3b69c sp 00000000ffedce7c error 4 in fglrx_dri.so[f4c50000+22d7000]