dmesg - tnw-1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-14-generic (buildd@akateko) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #21-Ubuntu SMP Tue Nov 12 17:07:40 UTC 2013 (Ubuntu 3.11.0-14.21-generic 3.11.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: System manufacturer System Product Name/M2A-VM HDMI, BIOS ASUS M2A-VM HDMI ACPI BIOS Revision 1803 06/17/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 base 00CFF00000 mask FFFFF00000 uncachable
4 base 0100000000 mask FFE0000000 write-back
5 base 0120000000 mask FFF0000000 write-back
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 256MB, type WB
total RAM covered: 3327M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000f65b0-0x000f65bf] mapped at [c00f65b0]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b39000, 0x01b39fff] PGTABLE
RAMDISK: [mem 0x35548000-0x36a9bfff]
ACPI: RSDP 000f8260 00024 (v02 ATI )
ACPI: XSDT cfee3100 0004C (v01 ATI ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP cfee8500 000F4 (v03 ATI ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT cfee3280 0520B (v01 ATI ASUSACPI 00001000 MSFT 03000000)
ACPI: FACS cfee0000 00040
ACPI: SSDT cfee8740 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET cfee8a40 00038 (v01 ATI ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG cfee8ac0 0003C (v01 ATI ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC cfee8640 00084 (v01 ATI ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
3972MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b3a000, 0x01b3afff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcfedffff]
node 0: [mem 0x00000000-0x2fffffff]
On node 0 totalpages: 1048190
free_area_init_node: node 0, pgdat c1948b40, node_mem_map f2f48020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 7945 pages used for memmap
HighMem zone: 819938 pages, LIFO batch:31
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8200 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bb4000 s36288 r0 d21056 u57344
pcpu-alloc: s36288 r0 d21056 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1046406
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 9961464 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00130000)
Memory: 4109612K/4192760K available (6353K kernel code, 607K rwdata, 2640K rodata, 880K init, 908K bss, 83148K reserved, 3279752K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1962000 - 0xc1a3e000 ( 880 kB)
.data : 0xc1634864 - 0xc1961dc0 (3253 kB)
.text : 0xc1000000 - 0xc1634864 (6354 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2499.921 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.84 BogoMIPS (lpj=9999684)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 28K (c1a3e000 - c1a45000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27143 entries in 54 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) Dual Core Processor 4850e (fam: 0f, model: 6b, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f6cf4000 soft=f6cf6000
Initializing CPU#1
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (9999.62 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
regulator-dummy: no parameters
RTC time: 14:31:14, date: 01/03/14
NET: Registered protocol family 16
EISA bus registered
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff]
TOM2: 0000000130000000 aka 4864M
bus: [bus 00-03] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xefffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x130000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
pci 0000:00:02.0: [1002:7913] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:7917] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.3: System wakeup disabled by ACPI
pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.4: System wakeup disabled by ACPI
pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfdbc0000-0xfdbdffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xde00-0xdeff]
pci 0000:01:00.0: reg 0x30: [mem 0xfdba0000-0xfdbbffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfdbfc000-0xfdbfffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xee00-0xeeff]
pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:03:06.0: [13f6:0111] type 00 class 0x040100
pci 0000:03:06.0: reg 0x10: [io 0xcc00-0xccff]
pci 0000:03:06.0: supports D1 D2
pci 0000:03:07.0: [1106:3044] type 00 class 0x0c0010
pci 0000:03:07.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
pci 0000:03:07.0: reg 0x14: [io 0xcf00-0xcf7f]
pci 0000:03:07.0: supports D2
pci 0000:03:07.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:00: [io 0x4100-0x411f] has been reserved
system 00:00: [io 0x0228-0x022f] has been reserved
system 00:00: [io 0x040b] has been reserved
system 00:00: [io 0x04d6] has been reserved
system 00:00: [io 0x0c00-0x0c01] has been reserved
system 00:00: [io 0x0c14] has been reserved
system 00:00: [io 0x0c50-0x0c52] has been reserved
system 00:00: [io 0x0c6c-0x0c6d] has been reserved
system 00:00: [io 0x0c6f] has been reserved
system 00:00: [io 0x0cd0-0x0cd1] has been reserved
system 00:00: [io 0x0cd2-0x0cd3] has been reserved
system 00:00: [io 0x0cd4-0x0cdf] has been reserved
system 00:00: [io 0x4000-0x40fe] could not be reserved
system 00:00: [io 0x4210-0x4217] has been reserved
system 00:00: [io 0x0b10-0x0b1f] has been reserved
system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0220-0x0225] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x000ce600-0x000cffff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0xcfef0000-0xcffeffff] could not be reserved
system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved
system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfedffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21840K (f5548000 - f6a9c000)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1388759474.960:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1663
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI: [Package] has zero elements (f6e4b3a0)
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:13.5: EHCI Host Controller
ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.5: debug port 1
ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-14-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 94b4c972d56471bcbe88837e8baa241d98a4e0f0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 14:155:535
bdi 1:13: hash matches
tty ttyS15: hash matches
rtc_cmos 00:03: setting system clock to 2014-01-03 14:31:15 UTC (1388759475)
powernow-k8: fid 0x11 (2500 MHz), vid 0xe
powernow-k8: fid 0x10 (2400 MHz), vid 0xf
powernow-k8: fid 0xe (2200 MHz), vid 0x11
powernow-k8: fid 0xc (2000 MHz), vid 0x13
powernow-k8: fid 0xa (1800 MHz), vid 0x15
powernow-k8: fid 0x2 (1000 MHz), vid 0x16
powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4850e (2 cpu cores) (version 2.20.00)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-1: new high-speed USB device number 2 using ehci-pci
isapnp: No Plug & Play device found
Freeing unused kernel memory: 880K (c1962000 - c1a3e000)
Write protecting the kernel text: 6356k
Write protecting the kernel read-only data: 2644k
NX-protecting the kernel data: 5932k
systemd-udevd[97]: starting version 204
libahci: module verification failed: signature and/or required key missing - tainting kernel
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: ASUS M2A-VM: enabling 64bit DMA
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi0 : ahci
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xf842e000, 00:1e:8c:17:ff:b8, XID 18000000 IRQ 42
r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.11.0-14-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB 2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.11.0-14-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-pci 0000:00:13.2: OHCI PCI host controller
ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
usb 1-2: new high-speed USB device number 3 using ehci-pci
ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB03, max UDMA/33
ata5.01: ATA-7: SAMSUNG SP2014N, VC100-37, max UDMA/100
ata5.01: 390721968 sectors, multi 1: LBA48
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.11.0-14-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci-pci 0000:00:13.3: OHCI PCI host controller
ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
ata5.00: configured for UDMA/33
ata5.01: configured for UDMA/100
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.11.0-14-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci-pci 0000:00:13.4: OHCI PCI host controller
ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.11.0-14-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 1-2: New USB device found, idVendor=13fd, idProduct=1340
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: HD103UJ
usb 1-2: Manufacturer: SAMSUNG
usb 1-2: SerialNumber: S13PJDWQB12735
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-3: new high-speed USB device number 4 using ehci-pci
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
usb 1-3: New USB device found, idVendor=0bc2, idProduct=3300
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Desktop
usb 1-3: Manufacturer: Seagate
usb 1-3: SerialNumber: 2GHN99XM
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi6 : usb-storage 1-2:1.0
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi7 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
firewire_core 0000:03:07.0: created device fw0: GUID 0011d800018490b4, S400
usb 1-1.1: new full-speed USB device number 5 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
scsi 4:0:1:0: Direct-Access ATA SAMSUNG SP2014N VC10 PQ: 0 ANSI: 5
sd 4:0:1:0: Attached scsi generic sg2 type 0
sd 4:0:1:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 4:0:1:0: [sdb] Write Protect is off
sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 4:0:1:0: [sdb] Attached SCSI disk
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.1: New USB device found, idVendor=0a12, idProduct=0001
usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.1: Product: Bluetooth2.1+EDR CLASS1
usb 1-1.4: new full-speed USB device number 6 using ehci-pci
usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52f
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB Receiver
usb 1-1.4: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.4/1-1.4:1.0/input/input2
hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.5-1.4/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.4/1-1.4:1.1/input/input3
hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.5-1.4/input1
scsi 7:0:0:0: Direct-Access Seagate Desktop 0130 PQ: 0 ANSI: 4
scsi 6:0:0:0: Direct-Access SAMSUNG HD103UJ 1.04 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00
sd 7:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 2f 08 00 00
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: [sdd] No Caching mode page found
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: [sdd] No Caching mode page found
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sdc: sdc1
sdd: sdd1
sd 7:0:0:0: [sdd] No Caching mode page found
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sd 7:0:0:0: [sdd] Attached SCSI disk
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI disk
vesafb: mode is 800x600x32, linelength=3200, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8600000, using 1920k, total 1920k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 6 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 6112696k swap on /dev/sda5. Priority:-1 extents:1 across:6112696k FS
Adding 3697660k swap on /dev/sdb6. Priority:-2 extents:1 across:3697660k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[317]: starting version 204
lp: driver loaded but no devices found
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[fglrx] Maximum main memory to use for locked dma buffers: 3872 MBytes.
[fglrx] vendor: 1002 device: 68f9 count: 1
[fglrx] ioport: bar 4, base 0xde00, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10
lp0: using parport0 (interrupt-driven).
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x14
sp5100_tco: failed to find MMIO address, giving up.
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input4
microcode: AMD CPU family 0xf not supported
type=1400 audit(1388755888.843:2): apparmor="STATUS" operation="profile_load" parent=356 profile="unconfined" name="/sbin/dhclient" pid=370 comm="apparmor_parser"
type=1400 audit(1388755888.843:3): apparmor="STATUS" operation="profile_load" parent=356 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=370 comm="apparmor_parser"
type=1400 audit(1388755888.843:4): apparmor="STATUS" operation="profile_load" parent=356 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=370 comm="apparmor_parser"
type=1400 audit(1388755888.843:5): apparmor="STATUS" operation="profile_replace" parent=356 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=370 comm="apparmor_parser"
type=1400 audit(1388755888.843:6): apparmor="STATUS" operation="profile_replace" parent=356 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=370 comm="apparmor_parser"
type=1400 audit(1388755888.843:7): apparmor="STATUS" operation="profile_replace" parent=356 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=370 comm="apparmor_parser"
kvm: Nested Virtualization enabled
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
ppdev: user-space parallel port driver
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: failsafe main process (844) killed by TERM signal
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
init: idmapd-mounting (/mnt/addons-config) main process (687) killed by TERM signal
init: idmapd-mounting (/mnt/backup) main process (690) killed by TERM signal
init: idmapd-mounting (/mnt/media) main process (704) killed by TERM signal
init: idmapd-mounting (/mnt/Bilder) main process (706) killed by TERM signal
init: idmapd-mounting (/mnt/Tryfan) main process (720) killed by TERM signal
init: idmapd-mounting (/mnt/Gemensamma_dokument) main process (722) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1388755893.323:8): apparmor="STATUS" operation="profile_load" parent=995 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1001 comm="apparmor_parser"
type=1400 audit(1388755893.323:9): apparmor="STATUS" operation="profile_load" parent=995 profile="unconfined" name="chromium_browser" pid=1001 comm="apparmor_parser"
type=1400 audit(1388755893.323:10): apparmor="STATUS" operation="profile_replace" parent=995 profile="unconfined" name="chromium_browser" pid=1001 comm="apparmor_parser"
type=1400 audit(1388755893.347:11): apparmor="STATUS" operation="profile_replace" parent=995 profile="unconfined" name="/sbin/dhclient" pid=1002 comm="apparmor_parser"
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0x192881 offMax=0x192881
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.16_Ubuntu (interface 0x001a0005).
vboxpci: IOMMU not found (not registered)
init: avahi-cups-reload main process (1096) terminated with status 1
audit_printk_skb: 90 callbacks suppressed
type=1400 audit(1388755895.587:42): apparmor="STATUS" operation="profile_replace" parent=1104 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1342 comm="apparmor_parser"
type=1400 audit(1388755895.587:43): apparmor="STATUS" operation="profile_replace" parent=1104 profile="unconfined" name="/usr/sbin/cupsd" pid=1342 comm="apparmor_parser"
type=1400 audit(1388755895.587:44): apparmor="STATUS" operation="profile_replace" parent=1104 profile="unconfined" name="/usr/sbin/cupsd" pid=1342 comm="apparmor_parser"
fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1352
[fglrx] Firegl kernel thread PID: 1353
[fglrx] Firegl kernel thread PID: 1354
[fglrx] IRQ 44 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f88c000, size:474000
[fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
EXT4-fs (sdb5): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdd1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sdd1): using internal journal
EXT3-fs (sdd1): mounted filesystem with ordered data mode
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
hid-generic 0005:045E:023C.0003: unknown main item tag 0x0
input: Bluetooth Keyboard as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.1/1-1.1:1.0/bluetooth/hci0/hci0:42/input5
hid-generic 0005:045E:023C.0003: input,hidraw2: BLUETOOTH HID v0.01 Keyboard [Bluetooth Keyboard] on 00:15:83:52:32:13
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
hid-generic 0005:045E:023C.0004: unknown main item tag 0x0
input: Bluetooth Keyboard as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.1/1-1.1:1.0/bluetooth/hci0/hci0:42/input6
hid-generic 0005:045E:023C.0004: input,hidraw2: BLUETOOTH HID v0.01 Keyboard [Bluetooth Keyboard] on 00:15:83:52:32:13
perf samples too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
soffice.bin[13940]: segfault at e0 ip aea344d1 sp bffb19a4 error 4 in libQtGui.so.4.8.4[ae72d000+a89000]
type=1400 audit(1388818318.790:45): apparmor="STATUS" operation="profile_replace" parent=15450 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=15454 comm="apparmor_parser"
type=1400 audit(1388818318.790:46): apparmor="STATUS" operation="profile_replace" parent=15450 profile="unconfined" name="/usr/sbin/cupsd" pid=15454 comm="apparmor_parser"
type=1400 audit(1388818318.790:47): apparmor="STATUS" operation="profile_replace" parent=15450 profile="unconfined" name="/usr/sbin/cupsd" pid=15454 comm="apparmor_parser"
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
hid-generic 0005:045E:023C.0005: unknown main item tag 0x0
input: Bluetooth Keyboard as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.1/1-1.1:1.0/bluetooth/hci0/hci0:42/input7
hid-generic 0005:045E:023C.0005: input,hidraw2: BLUETOOTH HID v0.01 Keyboard [Bluetooth Keyboard] on 00:15:83:52:32:13
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
usb 1-10: new high-speed USB device number 7 using ehci-pci
usb 1-10: New USB device found, idVendor=0bda, idProduct=0301
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: USB3.0 Card Reader
usb 1-10: Manufacturer: Realtek
usb 1-10: SerialNumber: 201006010301
usb-storage 1-10:1.0: USB Mass Storage device detected
scsi8 : usb-storage 1-10:1.0
scsi 8:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 4
scsi 8:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 4
scsi 8:0:0:2: Direct-Access Generic- USB3.0 CRW -2 1.00 PQ: 0 ANSI: 4
scsi 8:0:0:3: Direct-Access Generic- USB3.0 CRW -3 1.00 PQ: 0 ANSI: 4
sd 8:0:0:0: Attached scsi generic sg5 type 0
sd 8:0:0:1: Attached scsi generic sg6 type 0
sd 8:0:0:2: Attached scsi generic sg7 type 0
sd 8:0:0:3: Attached scsi generic sg8 type 0
sd 8:0:0:0: [sde] 1000944 512-byte logical blocks: (512 MB/488 MiB)
sd 8:0:0:2: [sdg] Attached SCSI removable disk
sd 8:0:0:0: [sde] Write Protect is off
sd 8:0:0:0: [sde] Mode Sense: 2f 00 00 00
sd 8:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:1: [sdf] Attached SCSI removable disk
sd 8:0:0:3: [sdh] Attached SCSI removable disk
sde: sde1
sd 8:0:0:0: [sde] Attached SCSI removable disk
FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-10: USB disconnect, device number 7