dmesg - tryout

Return To tryout System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-14-generic (buildd@akateko) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #21-Ubuntu SMP Tue Nov 12 17:07:40 UTC 2013 (Ubuntu 3.11.0-14.21-generic 3.11.7)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f68ffff] usable
BIOS-e820: [mem 0x000000007f690000-0x000000007f69dfff] ACPI data
BIOS-e820: [mem 0x000000007f69e000-0x000000007f6cffff] ACPI NVS
BIOS-e820: [mem 0x000000007f6d0000-0x000000007f6ddfff] reserved
BIOS-e820: [mem 0x000000007f6e0000-0x000000007f6fffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/P5KPL-AM EPU, BIOS 0415    02/04/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7f690 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 07F700000 mask FFFF00000 uncachable
  2 base 07F800000 mask FFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
total RAM covered: 2039M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
 [mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
 [mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
 [mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b39000, 0x01b39fff] PGTABLE
RAMDISK: [mem 0x35fa2000-0x36fc8fff]
ACPI: RSDP 000fb7f0 00014 (v00 ACPIAM)
ACPI: RSDT 7f690000 0003C (v01 A_M_I_ OEMRSDT  02001004 MSFT 00000097)
ACPI: FACP 7f690200 00084 (v02 A_M_I_ OEMFACP  02001004 MSFT 00000097)
ACPI: DSDT 7f6905c0 08A54 (v01  A1350 A1350000 00000000 INTL 20060113)
ACPI: FACS 7f69e000 00040
ACPI: APIC 7f690390 0006C (v01 A_M_I_ OEMAPIC  02001004 MSFT 00000097)
ACPI: MCFG 7f690400 0003C (v01 A_M_I_ OEMMCFG  02001004 MSFT 00000097)
ACPI: OEMB 7f69e040 00080 (v01 A_M_I_ AMI_OEM  02001004 MSFT 00000097)
ACPI: HPET 7f699020 00038 (v01 A_M_I_ OEMHPET  02001004 MSFT 00000097)
ACPI: GSCI 7f69e0c0 02024 (v01 A_M_I_ GMCHSCI  02001004 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
1146MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
BRK [0x01b3a000, 0x01b3afff] PGTABLE
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  Normal   [mem 0x01000000-0x37bfdfff]
  HighMem  [mem 0x37bfe000-0x7f68ffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0x7f68ffff]
On node 0 totalpages: 521774
free_area_init_node: node 0, pgdat c1948b40, node_mem_map f4fb2020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  Normal zone: 1752 pages used for memmap
  Normal zone: 224254 pages, LIFO batch:31
  HighMem zone: 2294 pages used for memmap
  HighMem zone: 293522 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
e820: [mem 0x7f700000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bba000 s36288 r0 d21056 u57344
pcpu-alloc: s36288 r0 d21056 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519990
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave: enabled xstate_bv 0x3, cntxt size 0x240
allocated 4174968 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007f690)
Memory: 2037512K/2087096K available (6353K kernel code, 607K rwdata, 2640K rodata, 880K init, 908K bss, 49584K reserved, 1174088K highmem)
virtual kernel memory layout:
    fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc1962000 - 0xc1a3e000   ( 880 kB)
      .data : 0xc1634864 - 0xc1961dc0   (3253 kB)
      .text : 0xc1000000 - 0xc1634864   (6354 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f7008000 soft=f700a000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2700.138 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5400.27 BogoMIPS (lpj=10800552)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 28K (c1a3e000 - c1a45000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27143 entries in 54 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Pentium(R) Dual-Core  CPU      E5400  @ 2.70GHz (fam: 06, model: 17, stepping: 0a)
APIC calibration not consistent with PM-Timer: 115ms instead of 100ms
APIC delta adjusted to PM-Timer: 1249997 (1449981)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
CPU 1 irqstacks, hard=f70f4000 soft=f70f6000
Initializing CPU#1
smpboot: Booting Node   0, Processors  #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (10800.55 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7f69e000-0x7f6cffff] (204800 bytes)
regulator-dummy: no parameters
RTC time: 13:52:56, date: 12/28/13
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 7f6a00f0 00256 (v01    AMI   CPU1PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00256 (v01    AMI   CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 7f6a0350 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x7f700000-0xffffffff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfea80000-0xfeafffff]
pci 0000:00:02.0: reg 0x14: [io  0xdc00-0xdc07]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfea78000-0xfea7bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xd400-0xd41f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xd480-0xd49f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xd800-0xd81f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0xd880-0xd89f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfea77c00-0xfea77fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io  0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0xd080-0xd087]
pci 0000:00:1f.2: reg 0x14: [io  0xd000-0xd003]
pci 0000:00:1f.2: reg 0x18: [io  0xcc00-0xcc07]
pci 0000:00:1f.2: reg 0x1c: [io  0xc880-0xc883]
pci 0000:00:1f.2: reg 0x20: [io  0xc800-0xc80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:01:00.0: [1969:1026] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
pci 0000:01:00.0: reg 0x18: [io  0xec00-0xec7f]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 01]
pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f690000-0x7fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [dma 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:06: [io  0x0290-0x0297] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: [io  0x0800-0x087f] could not be reserved
system 00:07: [io  0x0480-0x04bf] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0d: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0e: [dma 0 disabled]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0f: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:10: [mem 0x00100000-0x7f6fffff] could not be reserved
system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 17 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f700000-0x7f8fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f900000-0x7fafffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x7fb00000-0x7fcfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x7f700000-0x7f8fffff]
pci 0000:00:1c.0:   bridge window [mem 0x7f900000-0x7fafffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 01]
pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.1:   bridge window [mem 0x7fb00000-0x7fcfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7f700000-0xffffffff]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x7f700000-0x7f8fffff]
pci_bus 0000:02: resource 2 [mem 0x7f900000-0x7fafffff 64bit pref]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:01: resource 2 [mem 0x7fb00000-0x7fcfffff 64bit pref]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0x7f700000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16540K (f5fa2000 - f6fc9000)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1388238776.456:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1718
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel G33 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [
 P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 23
ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 23
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfea77c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-14-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 94b4c972d56471bcbe88837e8baa241d98a4e0f0'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 9:858:888
ata_piix 0000:00:1f.1: hash matches
rtc_cmos 00:02: setting system clock to 2013-12-28 13:52:56 UTC (1388238776)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3.00: ATA-7: ST3300820AS, 3.AHG, max UDMA/100
ata3.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata3.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata3.01: configured for UDMA/133
isapnp: No Plug & Play device found
usb 1-3: new high-speed USB device number 2 using ehci-pci
ata1.00: ATAPI: ATAPI   DVD A  DH20A4H, QP53, max UDMA/66
ata1.01: ATAPI: LITE-ON DVDRW SHW-1635S, YS0R, max UDMA/66
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/66
scsi 0:0:0:0: CD-ROM            ATAPI    DVD A  DH20A4H   QP53 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 0:0:1:0: CD-ROM            LITE-ON  DVDRW SHW-1635S  YS0R PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
sr 0:0:1:0: Attached scsi generic sg1 type 5
scsi 2:0:0:0: Direct-Access     ATA      ST3300820AS      3.AH PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 2:0:1:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
sd 2:0:1:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-3: New USB device found, idVendor=04b8, idProduct=0898
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: EPSON XP-400 Series
usb 1-3: Manufacturer: EPSON
usb 1-3: SerialNumber: 514556593434353815
 sda: sda1 sda2 < sda5 >
 sdb: unknown partition table
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:1:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 880K (c1962000 - c1a3e000)
Write protecting the kernel text: 6356k
Write protecting the kernel read-only data: 2644k
NX-protecting the kernel data: 5932k
systemd-udevd[105]: starting version 204
usb_storage: module verification failed: signature and/or required key missing - tainting kernel
usb-storage 1-3:1.2: USB Mass Storage device detected
scsi4 : usb-storage 1-3:1.2
usbcore: registered new interface driver usb-storage
tsc: Refined TSC clocksource calibration: 2699.999 MHz
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 5-1: new full-speed USB device number 2 using uhci_hcd
EXT4-fs (sda1): orphan cleanup on readonly fs
usb 5-1: new full-speed USB device number 3 using uhci_hcd
EXT4-fs (sda1): 24 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
scsi 4:0:0:0: Direct-Access     EPSON    Storage          1.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sdc] Attached SCSI removable disk
Switched to clocksource tsc
hub 5-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 5-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 5-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 5-0:1.0: unable to enumerate USB device on port 1
Adding 2085884k swap on /dev/sda5.  Priority:-1 extents:1 across:2085884k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[273]: starting version 204
lp: driver loaded but no devices found
intel_rng: FWH not detected
[drm] Initialized drm 1.1.0 20060810
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPS0 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPS0 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
type=1400 audit(1388238790.117:2): apparmor="STATUS" operation="profile_load" parent=300 profile="unconfined" name="/sbin/dhclient" pid=314 comm="apparmor_parser"
type=1400 audit(1388238790.117:3): apparmor="STATUS" operation="profile_load" parent=300 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=314 comm="apparmor_parser"
type=1400 audit(1388238790.117:4): apparmor="STATUS" operation="profile_load" parent=300 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=314 comm="apparmor_parser"
type=1400 audit(1388238790.121:5): apparmor="STATUS" operation="profile_replace" parent=300 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=314 comm="apparmor_parser"
type=1400 audit(1388238790.121:6): apparmor="STATUS" operation="profile_replace" parent=300 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=314 comm="apparmor_parser"
type=1400 audit(1388238790.121:7): apparmor="STATUS" operation="profile_replace" parent=300 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=314 comm="apparmor_parser"
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
[drm] Memory usable by graphics device = 512M
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
lp0: using parport0 (interrupt-driven).
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
i915: No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x20/0x0
   inputs:
     Rear Mic=0x1a
     Front Mic=0x1e
     Line=0x1b
     CD=0x1f
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0898
usbcore: registered new interface driver usblp
ppdev: user-space parallel port driver
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (598) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
type=1400 audit(1388238794.529:8): apparmor="STATUS" operation="profile_load" parent=723 profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=729 comm="apparmor_parser"
type=1400 audit(1388238794.529:9): apparmor="STATUS" operation="profile_load" parent=723 profile="unconfined" name="chromium_browser" pid=729 comm="apparmor_parser"
type=1400 audit(1388238794.529:10): apparmor="STATUS" operation="profile_replace" parent=723 profile="unconfined" name="chromium_browser" pid=729 comm="apparmor_parser"
type=1400 audit(1388238794.557:11): apparmor="STATUS" operation="profile_load" parent=723 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=728 comm="apparmor_parser"
init: avahi-cups-reload main process (747) terminated with status 1
audit_printk_skb: 153 callbacks suppressed
type=1400 audit(1388238795.173:63): apparmor="STATUS" operation="profile_replace" parent=760 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=764 comm="apparmor_parser"
type=1400 audit(1388238795.173:64): apparmor="STATUS" operation="profile_replace" parent=760 profile="unconfined" name="/usr/sbin/cupsd" pid=764 comm="apparmor_parser"
type=1400 audit(1388238795.173:65): apparmor="STATUS" operation="profile_replace" parent=760 profile="unconfined" name="/usr/sbin/cupsd" pid=764 comm="apparmor_parser"
init: alsa-restore main process (852) terminated with status 99
ATL1E 0000:01:00.0 eth0: NIC Link is Up 
perf samples too long (2544 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
type=1400 audit(1388240918.115:66): apparmor="STATUS" operation="profile_replace" parent=2876 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2880 comm="apparmor_parser"
type=1400 audit(1388240918.115:67): apparmor="STATUS" operation="profile_replace" parent=2876 profile="unconfined" name="/usr/sbin/cupsd" pid=2880 comm="apparmor_parser"
type=1400 audit(1388240918.115:68): apparmor="STATUS" operation="profile_replace" parent=2876 profile="unconfined" name="/usr/sbin/cupsd" pid=2880 comm="apparmor_parser"
systemd-hostnamed[2958]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[5729]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
conftest[22435]: segfault at 0 ip 0804847b sp bfa45530 error 4 in conftest[8048000+1000]
conftest[22464]: segfault at 0 ip b762dd1b sp bfdcc1dc error 4 in libc-2.17.so[b74e9000+1ae000]

Return To tryout System Information