dmesg - 123
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@panlong) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:19:42 UTC 2013 (Ubuntu 3.8.0-19.29-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fedffff] usable
BIOS-e820: [mem 0x000000007fee0000-0x000000007fef4fff] ACPI data
BIOS-e820: [mem 0x000000007fef5000-0x000000007fefffff] ACPI NVS
BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: IBM 2687D4U/2687D4U, BIOS 1YET65WW (1.29 ) 08/21/2006
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7fee0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DBFFF uncachable
DC000-DFFFF write-back
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
total RAM covered: 2047M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x3447c000-0x36235fff]
ACPI: RSDP 000f6c00 00024 (v02 IBM )
ACPI: XSDT 7fee6fe7 0005C (v01 IBM TP-1Y 00001290 LTP 00000000)
ACPI: FACP 7fee7100 000F4 (v03 IBM TP-1Y 00001290 IBM 00000001)
ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20121018/tbfadt-567)
ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20121018/tbfadt-598)
ACPI: DSDT 7fee72e7 0DB15 (v01 IBM TP-1Y 00001290 MSFT 0100000E)
ACPI: FACS 7fef6000 00040
ACPI: SSDT 7fee72b4 00033 (v01 IBM TP-1Y 00001290 MSFT 0100000E)
ACPI: ECDT 7fef4dfc 00052 (v01 IBM TP-1Y 00001290 IBM 00000001)
ACPI: TCPA 7fef4e4e 00032 (v01 IBM TP-1Y 00001290 PTL 00000001)
ACPI: APIC 7fef4e80 0005A (v01 IBM TP-1Y 00001290 IBM 00000001)
ACPI: MCFG 7fef4eda 0003C (v01 IBM TP-1Y 00001290 IBM 00000001)
ACPI: BOOT 7fef4fd8 00028 (v01 IBM TP-1Y 00001290 LTP 00000001)
ACPI: Local APIC address 0xfee00000
1154MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x7fedffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x7fedffff]
On node 0 totalpages: 523887
free_area_init_node: node 0, pgdat c18f6100, node_mem_map f6bfd200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 2310 pages used for memmap
HighMem zone: 293340 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f6be3000 s35008 r0 d22336 u57344
pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519793
Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-19-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 4191872 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007fee0)
Memory: 2032736k/2096000k available (6251k kernel code, 62812k reserved, 2973k data, 784k init, 1182600k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1903000 - 0xc19c7000 ( 784 kB)
.data : 0xc161ad30 - 0xc19023c0 (2973 kB)
.text : 0xc1000000 - 0xc161ad30 (6251 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f4006000 soft=f4008000
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 1862.275 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.55 BogoMIPS (lpj=7449100)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Disabled fast string operations
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26115 entries in 52 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) M processor 1.86GHz (fam: 06, model: 0d, stepping: 08)
Performance Events: p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
Brought up 1 CPUs
smpboot: Total of 1 processors activated (3724.55 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7fef5000-0x7fefffff] (45056 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 3 docks/bays found
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
pci 0000:00:01.0: [8086:2591] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f]
pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f]
pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xb0000000-0xb00003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
pci 0000:00:1e.2: reg 10: [io 0x1c00-0x1cff]
pci 0000:00:1e.2: reg 14: [io 0x1880-0x18bf]
pci 0000:00:1e.2: reg 18: [mem 0xb0000800-0xb00009ff]
pci 0000:00:1e.2: reg 1c: [mem 0xb0000400-0xb00004ff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
pci 0000:00:1e.3: reg 10: [io 0x2400-0x24ff]
pci 0000:00:1e.3: reg 14: [io 0x2000-0x207f]
pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 15e0-15ef
pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
pci 0000:01:00.0: [1002:5460] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 18: [mem 0xb0100000-0xb010ffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xb0100000-0xb01fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff pref]
pci 0000:02:00.0: [14e4:167d] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0xb0200000-0xb020ffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xb0200000-0xb02fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-0a]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xb2000000-0xb3ffffff]
pci 0000:00:1c.2: bridge window [mem 0xc8000000-0xc80fffff 64bit pref]
pci 0000:0b:00.0: [1180:0476] type 02 class 0x060700
pci 0000:0b:00.0: reg 10: [mem 0xb4000000-0xb4000fff]
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:02.0: [8086:4224] type 00 class 0x028000
pci 0000:0b:02.0: reg 10: [mem 0xb4001000-0xb4001fff]
pci 0000:0b:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 0b-0e] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff]
pci 0000:00:1e.0: bridge window [mem 0xb4000000-0xbfffffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:0c: busn_res: can not insert [bus 0c-ff] under [bus 0b-0e] (conflicts with (null) [bus 0b-0e])
pci_bus 0000:0c: busn_res: [bus 0c-ff] end is updated to 0d
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fee0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1180-0x11bf] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x1641] has been reserved
system 00:01: [io 0x1644-0x167f] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xf0008000-0xf000bfff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (disabled)
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [dma 3]
pnp 00:0a: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
pnp 00:0b: Plug and Play ACPI device, IDs NSC1100 (disabled)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xb0120000-0xb013ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xb0100000-0xb01fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.0: bridge window [mem 0xb0200000-0xb02fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03-0a]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xb2000000-0xb3ffffff]
pci 0000:00:1c.2: bridge window [mem 0xc8000000-0xc80fffff 64bit pref]
pci 0000:0b:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:0b:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:0b:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:0b:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:0b:00.0: BAR 15: assigned [mem 0xd0000000-0xd3ffffff pref]
pci 0000:0b:00.0: BAR 16: assigned [mem 0xb8000000-0xbbffffff]
pci 0000:0b:00.0: BAR 13: assigned [io 0x5000-0x50ff]
pci 0000:0b:00.0: BAR 14: assigned [io 0x5400-0x54ff]
pci 0000:0b:00.0: CardBus bridge to [bus 0c-0d]
pci 0000:0b:00.0: bridge window [io 0x5000-0x50ff]
pci 0000:0b:00.0: bridge window [io 0x5400-0x54ff]
pci 0000:0b:00.0: bridge window [mem 0xd0000000-0xd3ffffff pref]
pci 0000:0b:00.0: bridge window [mem 0xb8000000-0xbbffffff]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0e]
pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff]
pci 0000:00:1e.0: bridge window [mem 0xb4000000-0xbfffffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xb0100000-0xb01fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff pref]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0xb0200000-0xb02fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xb2000000-0xb3ffffff]
pci_bus 0000:03: resource 2 [mem 0xc8000000-0xc80fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x5000-0x8fff]
pci_bus 0000:0b: resource 1 [mem 0xb4000000-0xbfffffff]
pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:0b: resource 4 [io 0x0000-0xffff]
pci_bus 0000:0b: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:0c: resource 0 [io 0x5000-0x50ff]
pci_bus 0000:0c: resource 1 [io 0x5400-0x54ff]
pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xd3ffffff pref]
pci_bus 0000:0c: resource 3 [mem 0xb8000000-0xbbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.1: power state changed by ACPI to D0
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30440k freed
Simple Boot Flag at 0x35 set to 0x1
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1387906007.028:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1719
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 13
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (79 C)
GHES: HEST is not enabled!
serial 00:08: [io 0x03f8-0x03ff]
serial 00:08: [irq 4]
serial 00:08: activated
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 19, io mem 0xb0000000
isapnp: No Plug & Play device found
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fceb9fd088cf158e29d83343e1c98bf8ab23d94a'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:05: setting system clock to 2013-12-24 17:26:47 UTC (1387906007)
ACPI: Battery Slot [BAT0] (battery present)
P-state transition latency capped at 20 uS
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata2.00: ATAPI: UJDA765 DVD/CDRW, 1.70, max UDMA/33
ata1.00: ATA-6: HTS541080G9AT00, MB4IA60A, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA
ata1.00: applying bridge limits
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4I PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM MATSHITA UJDA765 DVD/CDRW 1.70 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 784k freed
Write protecting the kernel text: 6252k
Write protecting the kernel read-only data: 2432k
NX-protecting the kernel data: 3988k
udevd[96]: starting version 175
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[drm] Initialized drm 1.1.0 20060810
Disabling lock debugging due to kernel taint
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
PTP clock support registered
tg3.c:v3.128 (December 03, 2012)
tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:16:41:12:40:18
tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
usb 3-1: new low-speed USB device number 2 using uhci_hcd
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV380 0x1002:0x5460 0x1014:0x056E).
[drm] register mmio base: 0xB0100000
[drm] register mmio size: 65536
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (64M used)
radeon 0000:01:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 43 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 440692 kiB
[TTM] Zone highmem: Available graphics memory: 1031992 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 64M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0xffc91000
[drm] Loading R300 Microcode
[drm] radeon: ring at 0x00000000A0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Panel ID String: Samsung LTN150P1-L02
[drm] Panel Size 1400x1050
[drm] radeon legacy LVDS backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] DFP1: INTERNAL_TMDS1
[drm] Connector 2:
[drm] LVDS-1
[drm] Encoders:
[drm] LCD1: INTERNAL_LVDS
[drm] Connector 3:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
[drm] radeon: power management initialized
[drm] fb mappable at 0xC00C0000
[drm] vram apper at 0xC0000000
[drm] size 5914624
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 175x65
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
bio: create slab at 1
usb 3-1: New USB device found, idVendor=1d57, idProduct=0010
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: usb mouse with wheel
usb 3-1: Manufacturer: HID-Compliant Mouse
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID-Compliant Mouse usb mouse with wheel as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5
hid-generic 0003:1D57:0010.0001: input,hidraw0: USB HID v1.10 Mouse [HID-Compliant Mouse usb mouse with wheel] on usb-0000:00:1d.1-1/input0
input: HID-Compliant Mouse usb mouse with wheel as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input6
hid-generic 0003:1D57:0010.0002: input,hidraw1: USB HID v1.10 Keyboard [HID-Compliant Mouse usb mouse with wheel] on usb-0000:00:1d.1-1/input1
usb 3-2: new low-speed USB device number 3 using uhci_hcd
usb 3-2: New USB device found, idVendor=04f2, idProduct=0402
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Keyboard
usb 3-2: Manufacturer: Chicony
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
hid-generic 0003:04F2:0402.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.1-2/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input8
hid-generic 0003:04F2:0402.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1d.1-2/input1
xor: automatically using best checksumming function:
pIII_sse : 4919.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
Btrfs loaded
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): orphan cleanup on readonly fs
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 3932175
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 924554
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 924553
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2884398
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2884361
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 3932177
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 1181314
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 664273
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 924556
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 924555
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 664342
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 397289
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 525247
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 525244
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 397292
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 397297
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 663344
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2884161
EXT4-fs (dm-0): 18 orphan inodes deleted
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Adding 2097148k swap on /dev/mapper/mint--vg-swap_1. Priority:-1 extents:1 across:2097148k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[459]: starting version 175
lp: driver loaded but no devices found
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
intel_rng: FWH not detected
cfg80211: Calling CRDA to update world regulatory domain
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
yenta_cardbus 0000:0b:00.0: CardBus bridge found [1014:056c]
NET: Registered protocol family 23
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lp0: using parport0 (interrupt-driven).
Non-volatile memory driver v1.3
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc 00:0a: disabled
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation
yenta_cardbus 0000:0b:00.0: ISA IRQ mask 0x0c30, PCI irq 16
yenta_cardbus 0000:0b:00.0: Socket status: 30000006
yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge window: [io 0x5000-0x8fff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x8fff:
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 1YET65WW (1.29 ), EC 1YHT27WW-1.04
thinkpad_acpi: IBM ThinkPad T43, model 2687D4U
thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
device-mapper: multipath: version 1.5.1 loaded
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0, board id: 71, fw id: 4797594
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
excluding 0x5000-0x50ff 0x5400-0x54ff
yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge window: [mem 0xb4000000-0xbfffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xb4000000-0xbfffffff:
excluding 0xb4000000-0xb47fffff 0xb8000000-0xbbffffff
yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd7ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd7ffffff:
excluding 0xd0000000-0xd7ffffff
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
gpio_ich: GPIO from 206 to 255 on gpio_ich
ppdev: user-space parallel port driver
snd_intel8x0 0000:00:1e.2: setting latency timer to 64
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
excluding 0x3f0-0x3ff 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcffff 0xdc000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
intel8x0_measure_ac97_clock: measured 55464 usecs (2672 samples)
intel8x0: clocking to 48000
psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
btrfs: open /dev/dm-0 failed
btrfs: open /dev/dm-1 failed
btrfs: open /dev/dm-0 failed
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
init: failsafe main process (856) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (969) terminated with status 1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (1383) terminated with status 1
usb 3-1: USB disconnect, device number 2
usb 3-1: new low-speed USB device number 4 using uhci_hcd
usb 3-1: New USB device found, idVendor=1d57, idProduct=0010
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: usb mouse with wheel
usb 3-1: Manufacturer: HID-Compliant Mouse
input: HID-Compliant Mouse usb mouse with wheel as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input12
hid-generic 0003:1D57:0010.0005: input,hidraw0: USB HID v1.10 Mouse [HID-Compliant Mouse usb mouse with wheel] on usb-0000:00:1d.1-1/input0
input: HID-Compliant Mouse usb mouse with wheel as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input13
hid-generic 0003:1D57:0010.0006: input,hidraw1: USB HID v1.10 Keyboard [HID-Compliant Mouse usb mouse with wheel] on usb-0000:00:1d.1-1/input1
systemd-timedated[2161]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 441)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1438)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 5783)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 7661)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 8019)
CPU0: Core temperature/speed normal