dmesg - software
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.12.3-031203-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201312041453 SMP Wed Dec 4 19:54:05 UTC 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bc37ffff] usable
BIOS-e820: [mem 0x00000000bc380000-0x00000000bc669fff] reserved
BIOS-e820: [mem 0x00000000bc66a000-0x00000000bc679fff] ACPI data
BIOS-e820: [mem 0x00000000bc67a000-0x00000000bca76fff] ACPI NVS
BIOS-e820: [mem 0x00000000bca77000-0x00000000bd667fff] reserved
BIOS-e820: [mem 0x00000000bd668000-0x00000000bd668fff] usable
BIOS-e820: [mem 0x00000000bd669000-0x00000000bd86bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bd86c000-0x00000000bdc96fff] usable
BIOS-e820: [mem 0x00000000bdc97000-0x00000000bdff3fff] reserved
BIOS-e820: [mem 0x00000000bdff4000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P9X79 LE, BIOS 3501 03/14/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFC00000000 write-back
1 base 000400000000 mask 3FFFC0000000 write-back
2 base 0000BF000000 mask 3FFFFF000000 uncachable
3 base 0000C0000000 mask 3FFFC0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 1GB, type WB
reg 2, base: 3056MB, range: 16MB, type UC
reg 3, base: 3GB, range: 1GB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3056MB, range: 16MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 1GB, type WB
e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf] mapped at [ffff8800000fd8c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[mem 0x43fe00000-0x43fffffff] page 1G
init_memory_mapping: [mem 0x43c000000-0x43fdfffff]
[mem 0x43c000000-0x43fdfffff] page 1G
init_memory_mapping: [mem 0x400000000-0x43bffffff]
[mem 0x400000000-0x43bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xbc37ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbc1fffff] page 2M
[mem 0xbc200000-0xbc37ffff] page 4k
init_memory_mapping: [mem 0xbd668000-0xbd668fff]
[mem 0xbd668000-0xbd668fff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0xbd86c000-0xbdc96fff]
[mem 0xbd86c000-0xbd9fffff] page 4k
[mem 0xbda00000-0xbdbfffff] page 2M
[mem 0xbdc00000-0xbdc96fff] page 4k
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
init_memory_mapping: [mem 0xbdff4000-0xbdffffff]
[mem 0xbdff4000-0xbdffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x34bac000-0x365cdfff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000bc671070 0005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bc6799c0 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bc671168 08853 (v02 ALASKA A M I 00000010 INTL 20051117)
ACPI: FACS 00000000bca6e080 00040
ACPI: APIC 00000000bc679ad0 000C8 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000bc679b98 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bc679be0 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bc679db8 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 00000000bc679df8 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: BGRT 00000000bc679e88 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x00000000-0x43fffffff]
NODE_DATA [mem 0x43fff8000-0x43fffcfff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbc37ffff]
node 0: [mem 0xbd668000-0xbd668fff]
node 0: [mem 0xbd86c000-0xbdc96fff]
node 0: [mem 0xbdff4000-0xbdffffff]
node 0: [mem 0x100000000-0x43fffffff]
On node 0 totalpages: 4179797
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11999 pages used for memmap
DMA32 zone: 767928 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407872 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbc380000-0xbc669fff]
PM: Registered nosave memory: [mem 0xbc66a000-0xbc679fff]
PM: Registered nosave memory: [mem 0xbc67a000-0xbca76fff]
PM: Registered nosave memory: [mem 0xbca77000-0xbd667fff]
PM: Registered nosave memory: [mem 0xbd669000-0xbd86bfff]
PM: Registered nosave memory: [mem 0xbdc97000-0xbdff3fff]
PM: Registered nosave memory: [mem 0xbe000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbe000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88043fc00000 s86592 r8192 d24000 u262144
pcpu-alloc: s86592 r8192 d24000 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4114465
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16346704K/16719188K available (7542K kernel code, 1118K rwdata, 3516K rodata, 1340K init, 1416K bss, 372484K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1152 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3610.704 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7221.40 BogoMIPS (lpj=14442816)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 16 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e68000 - ffffffff81e6f000)
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 31047 entries in 122 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
smpboot: Booting Node 0, Processors # 1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 3648922132 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
# 2 # 3 # 4 # 5 # 6 # 7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (57771.26 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbc67a000-0xbca76fff] (4182016 bytes)
PM: Registering ACPI NVS region [mem 0xbd669000-0xbd86bfff] (2109440 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 20:51:53, date: 12/15/13
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bca6d818 0079C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0079C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: SSDT 00000000bca6cd98 000EC (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000EC (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x10) granted
ACPI: \_SB_.PCI0.IOH_: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.VTDR: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.PCH_: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.CWDT: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.HPET: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.ITPM: can't evaluate _ADR (0x5)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb409000-0xfb409fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb408000-0xfb40800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb407000-0xfb4073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb400000-0xfb403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb406000-0xfb4063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb405000-0xfb4057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb404000-0xfb4040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:01:00.0: [10de:0fc6] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfb300000-0xfb307fff 64bit]
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfb200000-0xfb207fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:08:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:08:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:08:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:08:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:08:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:08:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:08:00.0: reg 0x24: [mem 0xfb100000-0xfb1001ff]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:09:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
pci 0000:09:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfbffffff] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
ACPI: \_SB_.UNC0: notify handler is installed
Found 2 acpi root devices
ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbc380000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd669000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdc97000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfbfff000-0xfbffffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io 0x0400-0x0453] could not be reserved
system 00:08: [io 0x0458-0x047f] has been reserved
system 00:08: [io 0x1180-0x119f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:09: [io 0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfbffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:07: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:09: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:0a: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0a: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0a: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0a: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0a: resource 10 [mem 0xc0000000-0xfbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26760K (ffff880034bac000 - ffff8800365ce000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb8380000-0xbc380000] (64MB) mapped at [ffff8800b8380000-ffff8800bc37ffff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1387140713.568:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31979
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Console: switching to colour frame buffer device 80x30
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb407000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12.3-031203-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb406000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.12.3-031203-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: irq 64 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 65 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 66 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 71 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.12.3-031203-generic xhci_hcd
usb usb3: SerialNumber: 0000:06:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.12.3-031203-generic xhci_hcd
usb usb4: SerialNumber: 0000:06:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 79 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.12.3-031203-generic xhci_hcd
usb usb5: SerialNumber: 0000:07:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.12.3-031203-generic xhci_hcd
usb usb6: SerialNumber: 0000:07:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 512624ee408e7d7f10b9a8d24ef89c2cc34dc79e'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 9:625:902
rtc_cmos 00:03: setting system clock to 2013-12-15 20:51:54 UTC (1387140714)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1340K (ffffffff81d19000 - ffffffff81e68000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 640K (ffff880001760000 - ffff880001800000)
Freeing unused kernel memory: 580K (ffff880001b6f000 - ffff880001c00000)
systemd-udevd[147]: starting version 204
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
pcieport 0000:00:1c.5: driver skip pci_set_master, fix it!
ahci 0000:00:1f.2: irq 80 for MSI/MSI-X
r8169 0000:09:00.0: irq 81 for MSI/MSI-X
r8169 0000:09:00.0 eth0: RTL8168f/8111f at 0xffffc90011bc8000, 74:d0:2b:28:01:b7, XID 08000800 IRQ 81
r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
MXM: GUID detected in BIOS
checking generic (d1000000 12c000) vs hw (c0000000 10000000)
checking generic (d1000000 12c000) vs hw (d0000000 2000000)
fb: conflicting fb hw usage nouveaufb vs simple - removing generic driver
Console: switching to colour dummy device 80x25
pcieport 0000:00:02.0: driver skip pci_set_master, fix it!
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7060a2
nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
nouveau [ DEVICE][0000:01:00.0] Family : NVE0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x22 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:01:00.0] ... signature not found
nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xfb405000 port 0xfb405180 irq 80
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfb405000 port 0xfb405380 irq 80
pcieport 0000:00:1c.4: driver skip pci_set_master, fix it!
ahci 0000:08:00.0: irq 82 for MSI/MSI-X
ahci 0000:08:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfb100000 port 0xfb100100 irq 82
ata8: SATA max UDMA/133 abar m512@0xfb100000 port 0xfb100180 irq 82
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PROM
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 80.07.35.00.1d
nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN01, max UDMA/133
ata2.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
usb 2-1: new high-speed USB device number 2 using ehci-pci
sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
sd 1:0:0:0: [sda] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata8: SATA link down (SStatus 0 SControl 300)
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=045e, idProduct=0040
usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 3-1: Manufacturer: Microsoft
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1c.2/0000:06:00.0/usb3/3-1/3-1:1.0/input/input4
hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:06:00.0-1/input0
usb 2-1.3: new high-speed USB device number 3 using ehci-pci
usb 2-1.3: New USB device found, idVendor=152d, idProduct=2338
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 2-1.3: Product: USB to ATA/ATAPI Bridge
usb 2-1.3: Manufacturer: JMicron
usb 2-1.3: SerialNumber: 22226291744C
usb-storage 2-1.3:1.0: USB Mass Storage device detected
scsi8 : usb-storage 2-1.3:1.0
usbcore: registered new interface driver usb-storage
usb 2-1.5: new high-speed USB device number 4 using ehci-pci
usb 2-1.5: New USB device found, idVendor=03f0, idProduct=3e17
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: HP LaserJet P1006
usb 2-1.5: Manufacturer: Hewlett-Packard
usb 2-1.5: SerialNumber: AC20PYF
usb 2-1.6: new low-speed USB device number 5 using ehci-pci
usb 2-1.6: New USB device found, idVendor=045e, idProduct=0732
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: Microsoft\xffffffc2\xffffffae\xffffffae Digital Media oard 3000
usb 2-1.6: Manufacturer: Microsoft
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media oard 3000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input5
hid-generic 0003:045E:0732.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media oard 3000] on usb-0000:00:1d.0-1.6/input0
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media oard 3000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input6
hid-generic 0003:045E:0732.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media oard 3000] on usb-0000:00:1d.0-1.6/input1
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: disabled
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[TTM] Zone kernel: Available graphics memory: 8188026 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 02011f62 00020010
nouveau [ DRM] DCB outp 02: 01022f12 00020030
nouveau [ DRM] DCB conn 00: 00000000
nouveau [ DRM] DCB conn 01: 00002161
nouveau [ DRM] DCB conn 02: 00001231
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau W[ DRM] voltage table 0x50 unknown
nouveau [ DRM] 3 available performance level(s)
nouveau [ DRM] 1: core 162MHz shader 324MHz memory 648MHz voltage 30mV
nouveau [ DRM] 2: core 405MHz shader 810MHz memory 1080MHz voltage 30mV
nouveau [ DRM] 3: core 1250MHz shader 2500MHz memory 1080MHz voltage 40mV
nouveau [ DRM] c:
nouveau [ DRM] MM: using COPY for buffer copies
nouveau [ DRM] allocated 1920x1080 fb: 0x80000, bo ffff880422870800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
scsi 8:0:0:0: Direct-Access ST325031 0AS F PQ: 0 ANSI: 2 CCS
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 38 00 00
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 < sdb5 >
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda7): mounted filesystem with ordered data mode
init: ureadahead main process (324) terminated with status 5
Adding 25599996k swap on /dev/sda6. Priority:-1 extents:1 across:25599996k FS
systemd-udevd[429]: starting version 204
lp: driver loaded but no devices found
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 83 for MSI/MSI-X
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x70c
device-mapper: multipath: version 1.6.0 loaded
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x70c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
snd_hda_intel 0000:00:1b.0: irq 84 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4007e629
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x000000e6
SKU: external_amp=0x5
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4007e629 for NID 0x1d
realtek: Enabling init ASM_ID=0xe629 CODEC_ID=10ec0892
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input16
asus_wmi: Disabling ACPI video driver
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
EXT3-fs (sda7): using internal journal
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (741) killed by TERM signal
init: avahi-cups-reload main process (835) terminated with status 1
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:09:00.0 eth0: link down
r8169 0000:09:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:09:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (1519) terminated with status 1
hp-systray[1804]: segfault at 10 ip 00000000005b844d sp 00007fffc5646840 error 4 in python2.7[400000+2ba000]
usblp 2-1.5:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17
usbcore: registered new interface driver usblp
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda12): using internal journal
EXT3-fs (sda12): mounted filesystem with ordered data mode
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
init: anacron main process (17169) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
serial 00:07: disabled
serial 00:07: System wakeup disabled by ACPI
nouveau [ DRM] suspending display...
nouveau [ DRM] unpinning framebuffer(s)...
nouveau [ DRM] evicting buffers...
mei_me 0000:00:16.0: suspend
nouveau [ DRM] waiting for kernel channels to go idle...
nouveau [ DRM] suspending client object trees...
nouveau [ DRM] suspending kernel object tree...
PM: suspend of devices complete after 1794.540 msecs
PM: late suspend of devices complete after 0.147 msecs
pcieport 0000:00:1c.5: System wakeup enabled by ACPI
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
pcieport 0000:00:1c.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 95.859 msecs
ACPI: Preparing to enter system sleep state S3
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 80
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 32
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
Intel pstate controlling: cpu 3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
Intel pstate controlling: cpu 4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
Intel pstate controlling: cpu 5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
Intel pstate controlling: cpu 6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
Intel pstate controlling: cpu 7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.2: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 173.031 msecs
PM: early resume of devices complete after 0.096 msecs
mei_me 0000:00:16.0: irq 83 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
ehci-pci 0000:00:1a.0: setting latency timer to 64
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
usb usb6: root hub lost power or was reset
pcieport 0000:00:1c.5: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
nouveau [ DRM] re-enabling device...
nouveau [ DRM] resuming kernel object tree...
nouveau [ VBIOS][0000:01:00.0] running init tables
xhci_hcd 0000:06:00.0: irq 65 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 66 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 84 for MSI/MSI-X
serial 00:07: activated
r8169 0000:09:00.0 eth0: link down
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/133
nouveau [ DRM] resuming client object trees...
nouveau [ DRM] resuming display...
usb 3-1: reset low-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:06:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88042333b340
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
r8169 0000:09:00.0 eth0: link up
ata2: link is slow to respond, please be patient (ready=0)
ata2: COMRESET failed (errno=-16)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 12445.398 msecs
PM: Finishing wakeup.
usb 2-1.3: USB disconnect, device number 3
Restarting tasks ... done.
Buffer I/O error on device sdb5, logical block 30441472
lost page write due to I/O error on sdb5
JBD2: Error -5 detected when updating journal superblock for sdb5-8.
mintmenu[2174]: segfault at 1 ip 00007fe5109186c6 sp 00007fffb50f2510 error 4 in _gi.so[7fe51090a000+22000]
mintmenu[21754]: segfault at 1 ip 00007f6d28e326c6 sp 00007fff4b0bdc30 error 4 in _gi.so[7f6d28e24000+22000]
mate-appearance[22160]: segfault at 8 ip 000000000041b375 sp 00007fff9d285cc0 error 4 in mate-appearance-properties[400000+2a000]
usb 2-1.3: new high-speed USB device number 6 using ehci-pci
usb 2-1.3: New USB device found, idVendor=152d, idProduct=2338
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 2-1.3: Product: USB to ATA/ATAPI Bridge
usb 2-1.3: Manufacturer: JMicron
usb 2-1.3: SerialNumber: 22226291744C
usb-storage 2-1.3:1.0: USB Mass Storage device detected
scsi9 : usb-storage 2-1.3:1.0
scsi 9:0:0:0: Direct-Access ST325031 0AS F PQ: 0 ANSI: 2 CCS
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 00 38 00 00
sd 9:0:0:0: [sdb] Asking for cache data failed
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sd 9:0:0:0: [sdb] Asking for cache data failed
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 < sdb5 >
sd 9:0:0:0: [sdb] Asking for cache data failed
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sd 9:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sdb5): recovery complete
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
perf samples too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000