dmesg - 12.04
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-34-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #49~precise1-Ubuntu SMP Wed Nov 13 18:05:00 UTC 2013 (Ubuntu 3.8.0-34.49~precise1-generic 3.8.13.12)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfea7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfea8000-0x00000000cfecffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A77TD, BIOS 2104 06/28/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000830000000 aka 33536M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfe8ffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcfe8ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfe8ffff @ [mem 0x1fffd000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x82fffffff]
[ 0.000000] [mem 0x100000000-0x7ffffffff] page 1G
[ 0.000000] [mem 0x800000000-0x82fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x82fffffff @ [mem 0xcfe8e000-0xcfe8ffff]
[ 0.000000] RAMDISK: [mem 0x36104000-0x37079fff]
[ 0.000000] ACPI: RSDP 00000000000fb510 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cfe90100 0005C (v01 062810 XSDT1005 20100628 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cfe90290 000F4 (v03 062810 FACP1005 20100628 MSFT 00000097)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
[ 0.000000] ACPI: DSDT 00000000cfe90450 0CFBE (v01 A1431 A1431001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cfea8000 00040
[ 0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 062810 APIC1005 20100628 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 062810 OEMMCFG 20100628 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 062810 OEMB1005 20100628 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cfe9f450 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cfe9f560 00038 (v01 062810 OEMHPET 20100628 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cfe9f5a0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x82fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x82fffffff] -> [mem 0x00000000-0x82fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x82fffffff]
[ 0.000000] NODE_DATA [mem 0x82fffb000-0x82fffffff]
[ 0.000000] [ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080f600000-ffff88082f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x82fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xcfe8ffff]
[ 0.000000] node 0: [mem 0x100000000-0x82fffffff]
[ 0.000000] On node 0 totalpages: 8388126
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13243 pages used for memmap
[ 0.000000] DMA32 zone: 834261 pages, LIFO batch:31
[ 0.000000] Normal zone: 117760 pages used for memmap
[ 0.000000] Normal zone: 7418880 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
[ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
[ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[ 0.000000] e820: [mem 0xcff00000-0xff6fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88082fc00000 s84928 r8192 d21568 u262144
[ 0.000000] pcpu-alloc: s84928 r8192 d21568 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8257053
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 32864268k/34340864k available (7172k kernel code, 788360k absent, 688236k reserved, 6071k data, 1016k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 134217728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Fast TSC calibration using PIT
[ 0.008000] tsc: Detected 2812.727 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.45 BogoMIPS (lpj=11250908)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000024] Security Framework initialized
[ 0.000034] AppArmor: AppArmor initialized
[ 0.000035] Yama: becoming mindful.
[ 0.001663] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.010118] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013919] Mount-cache hash table entries: 256
[ 0.014073] Initializing cgroup subsys cpuacct
[ 0.014075] Initializing cgroup subsys memory
[ 0.014083] Initializing cgroup subsys devices
[ 0.014084] Initializing cgroup subsys freezer
[ 0.014086] Initializing cgroup subsys blkio
[ 0.014087] Initializing cgroup subsys perf_event
[ 0.014089] Initializing cgroup subsys hugetlb
[ 0.014110] tseg: 0000000000
[ 0.014122] CPU: Physical Processor ID: 0
[ 0.014123] CPU: Processor Core ID: 0
[ 0.014124] mce: CPU supports 6 MCE banks
[ 0.014129] LVT offset 0 assigned for vector 0xf9
[ 0.014135] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.014135] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.014135] tlb_flushall_shift: 4
[ 0.014218] Freeing SMP alternatives: 24k freed
[ 0.015454] ACPI: Core revision 20121018
[ 0.026321] ftrace: allocating 29364 entries in 115 pages
[ 0.036815] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076494] smpboot: CPU0: AMD Phenom(tm) II X6 1055T Processor (fam: 10, model: 0a, stepping: 00)
[ 0.182896] Performance Events: AMD PMU driver.
[ 0.182900] ... version: 0
[ 0.182901] ... bit width: 48
[ 0.182902] ... generic registers: 4
[ 0.182902] ... value mask: 0000ffffffffffff
[ 0.182903] ... max period: 00007fffffffffff
[ 0.182904] ... fixed-purpose events: 0
[ 0.182905] ... event mask: 000000000000000f
[ 0.183781] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.183842] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK
[ 0.249225] Brought up 6 CPUs
[ 0.249227] smpboot: Total of 6 processors activated (33752.72 BogoMIPS)
[ 0.256299] devtmpfs: initialized
[ 0.258757] EVM: security.selinux
[ 0.258758] EVM: security.SMACK64
[ 0.258759] EVM: security.capability
[ 0.258846] PM: Registering ACPI NVS region [mem 0xcfea8000-0xcfecffff] (163840 bytes)
[ 0.259602] regulator-dummy: no parameters
[ 0.259646] NET: Registered protocol family 16
[ 0.259723] node 0 link 0: io port [1000, ffffff]
[ 0.259726] TOM: 00000000d0000000 aka 3328M
[ 0.259727] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.259729] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.259731] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.259733] node 0 link 0: mmio [a0000, bffff]
[ 0.259734] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.259735] TOM2: 0000000830000000 aka 33536M
[ 0.259737] bus: [bus 00-07] on node 0 link 0
[ 0.259738] bus: 00 [io 0x0000-0xffff]
[ 0.259739] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.259740] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.259741] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.259742] bus: 00 [mem 0x830000000-0xfcffffffff]
[ 0.259857] ACPI: bus type pci registered
[ 0.259906] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.259908] PCI: not using MMCONFIG
[ 0.259910] PCI: Using configuration type 1 for base access
[ 0.259911] PCI: Using configuration type 1 for extended access
[ 0.260969] bio: create slab at 0
[ 0.261056] ACPI: Added _OSI(Module Device)
[ 0.261058] ACPI: Added _OSI(Processor Device)
[ 0.261059] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.261060] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.261951] ACPI: EC: Look up EC in DSDT
[ 0.263293] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.297340] ACPI: Interpreter enabled
[ 0.297345] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.297359] ACPI: Using IOAPIC for interrupt routing
[ 0.297375] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.298314] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.310791] ACPI: No dock devices found.
[ 0.310795] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.310850] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.310852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.311081] PCI host bridge to bus 0000:00
[ 0.311084] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.311085] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.311087] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.311089] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.311090] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.311092] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
[ 0.311093] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.311104] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[ 0.311143] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.311171] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.311190] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.311217] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.311241] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.311259] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.311268] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.311276] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.311285] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.311294] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.311303] pci 0000:00:11.0: reg 24: [mem 0xf9fffc00-0xf9ffffff]
[ 0.311357] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.311369] pci 0000:00:12.0: reg 10: [mem 0xf9ffe000-0xf9ffefff]
[ 0.311430] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.311442] pci 0000:00:12.1: reg 10: [mem 0xf9ffd000-0xf9ffdfff]
[ 0.311510] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.311527] pci 0000:00:12.2: reg 10: [mem 0xf9fff800-0xf9fff8ff]
[ 0.311606] pci 0000:00:12.2: supports D1 D2
[ 0.311607] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.311629] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.311641] pci 0000:00:13.0: reg 10: [mem 0xf9ffc000-0xf9ffcfff]
[ 0.311703] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.311715] pci 0000:00:13.1: reg 10: [mem 0xf9ffb000-0xf9ffbfff]
[ 0.311781] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.311799] pci 0000:00:13.2: reg 10: [mem 0xf9fff400-0xf9fff4ff]
[ 0.311877] pci 0000:00:13.2: supports D1 D2
[ 0.311879] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.311903] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.311996] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.312012] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.312020] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.312029] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.312037] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.312046] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.312101] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.312120] pci 0000:00:14.2: reg 10: [mem 0xf9ff4000-0xf9ff7fff 64bit]
[ 0.312183] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.312197] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.312269] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.312308] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.312320] pci 0000:00:14.5: reg 10: [mem 0xf9ffa000-0xf9ffafff]
[ 0.312384] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.312397] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.312407] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.312418] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.312430] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.312474] pci 0000:01:00.0: [10de:0f00] type 00 class 0x030000
[ 0.312482] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.312492] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.312501] pci 0000:01:00.0: reg 1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.312507] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.312514] pci 0000:01:00.0: reg 30: [mem 0xfbe80000-0xfbefffff pref]
[ 0.312565] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[ 0.312573] pci 0000:01:00.1: reg 10: [mem 0xfbe7c000-0xfbe7ffff]
[ 0.320872] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.320878] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.320880] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.320884] pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.320920] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.320933] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.320952] pci 0000:02:00.0: reg 18: [mem 0xf8fff000-0xf8ffffff 64bit pref]
[ 0.320964] pci 0000:02:00.0: reg 20: [mem 0xf8ff8000-0xf8ffbfff 64bit pref]
[ 0.320973] pci 0000:02:00.0: reg 30: [mem 0xfbff0000-0xfbffffff pref]
[ 0.321023] pci 0000:02:00.0: supports D1 D2
[ 0.321024] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.328869] pci 0000:00:0a.0: PCI bridge to [bus 02]
[ 0.328873] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.328876] pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.328879] pci 0000:00:0a.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.328939] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.328948] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.328950] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.328951] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.328953] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.328954] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 0.328956] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.328977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.329015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.329045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.329091] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.329092] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.329762] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[ 0.329789] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.329813] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.329838] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.329861] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.329884] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.329907] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.329930] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.330010] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.330011] vgaarb: loaded
[ 0.330012] vgaarb: bridge control possible 0000:01:00.0
[ 0.330142] SCSI subsystem initialized
[ 0.330143] ACPI: bus type scsi registered
[ 0.330210] libata version 3.00 loaded.
[ 0.330223] ACPI: bus type usb registered
[ 0.330237] usbcore: registered new interface driver usbfs
[ 0.330243] usbcore: registered new interface driver hub
[ 0.330263] usbcore: registered new device driver usb
[ 0.330336] PCI: Using ACPI for IRQ routing
[ 0.338473] PCI: pci_cache_line_size set to 64 bytes
[ 0.338524] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.338526] e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff]
[ 0.338587] NetLabel: Initializing
[ 0.338588] NetLabel: domain hash size = 128
[ 0.338589] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.338597] NetLabel: unlabeled traffic allowed by default
[ 0.338654] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.338657] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.340675] Switching to clocksource hpet
[ 0.344774] AppArmor: AppArmor Filesystem Enabled
[ 0.344792] pnp: PnP ACPI init
[ 0.344801] ACPI: bus type pnp registered
[ 0.344843] pnp 00:00: [dma 4]
[ 0.344861] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.344884] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.344899] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.344915] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.345375] pnp 00:04: [dma 0 disabled]
[ 0.345532] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.345565] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.345608] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.345924] pnp 00:07: [dma 0 disabled]
[ 0.345971] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.346045] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.346048] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.346049] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.346178] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.346180] system 00:09: [io 0x040b] has been reserved
[ 0.346181] system 00:09: [io 0x04d6] has been reserved
[ 0.346183] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.346184] system 00:09: [io 0x0c14] has been reserved
[ 0.346186] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.346187] system 00:09: [io 0x0c52] has been reserved
[ 0.346188] system 00:09: [io 0x0c6c] has been reserved
[ 0.346190] system 00:09: [io 0x0c6f] has been reserved
[ 0.346191] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.346193] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.346194] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.346196] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.346197] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.346199] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.346201] system 00:09: [io 0x0b00-0x0b0f] has been reserved
[ 0.346202] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.346205] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.346206] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.346208] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.346210] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.346212] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.346213] system 00:09: [mem 0x6ff00000-0x6fffffff] could not be reserved
[ 0.346215] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.346327] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.346329] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.346331] system 00:0a: [io 0x0300-0x030f] has been reserved
[ 0.346332] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.346334] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.346370] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.346372] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.346460] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.346462] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.346463] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.346465] system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved
[ 0.346466] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.346468] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.346536] pnp: PnP ACPI: found 13 devices
[ 0.346537] ACPI: ACPI bus type pnp unregistered
[ 0.352583] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.352586] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.352588] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.352591] pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.352593] pci 0000:00:0a.0: PCI bridge to [bus 02]
[ 0.352595] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.352597] pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.352599] pci 0000:00:0a.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.352602] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.352630] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.352631] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.352633] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.352634] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.352635] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.352637] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.352639] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.352640] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbefffff]
[ 0.352641] pci_bus 0000:01: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.352643] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.352644] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.352646] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.352647] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.352649] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.352650] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.352652] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.352653] pci_bus 0000:03: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.352654] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.352681] NET: Registered protocol family 2
[ 0.352972] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.353993] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.354244] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.354283] TCP: reno registered
[ 0.354312] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.354481] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.354676] NET: Registered protocol family 1
[ 0.796687] pci 0000:01:00.0: Boot video device
[ 0.796700] PCI: CLS 64 bytes, default 64
[ 0.796742] Trying to unpack rootfs image as initramfs...
[ 1.000321] Freeing initrd memory: 15832k freed
[ 1.004968] PCI-DMA: Disabling AGP.
[ 1.005083] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.005084] PCI-DMA: using GART IOMMU.
[ 1.005087] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.008621] LVT offset 1 assigned for vector 0x400
[ 1.008633] IBS: LVT offset 1 assigned
[ 1.008667] perf: AMD IBS detected (0x0000001f)
[ 1.008819] Initialise module verification
[ 1.008855] audit: initializing netlink socket (disabled)
[ 1.008870] type=2000 audit(1386737748.900:1): initialized
[ 1.031779] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.034071] VFS: Disk quotas dquot_6.5.2
[ 1.034101] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.034487] fuse init (API version 7.20)
[ 1.034542] msgmni has been set to 32768
[ 1.035038] Key type asymmetric registered
[ 1.035040] Asymmetric key parser 'x509' registered
[ 1.035064] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.035094] io scheduler noop registered
[ 1.035095] io scheduler deadline registered (default)
[ 1.035099] io scheduler cfq registered
[ 1.035225] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.035309] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 1.035362] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.035376] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.035469] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.035472] ACPI: Power Button [PWRB]
[ 1.035502] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.035504] ACPI: Power Button [PWRF]
[ 1.035777] ACPI: acpi_idle registered with cpuidle
[ 1.039079] GHES: HEST is not enabled!
[ 1.059645] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.060670] Linux agpgart interface v0.103
[ 1.061659] brd: module loaded
[ 1.062152] loop: module loaded
[ 1.062390] libphy: Fixed MDIO Bus: probed
[ 1.062431] tun: Universal TUN/TAP device driver, 1.6
[ 1.062432] tun: (C) 1999-2004 Max Krasnyansky
[ 1.062489] PPP generic driver version 2.4.2
[ 1.062531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.062532] ehci-pci: EHCI PCI platform driver
[ 1.062589] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.062595] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.062600] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.062612] ehci-pci 0000:00:12.2: debug port 1
[ 1.062649] ehci-pci 0000:00:12.2: irq 17, io mem 0xf9fff800
[ 1.072592] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.072616] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.072619] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.072621] usb usb1: Product: EHCI Host Controller
[ 1.072623] usb usb1: Manufacturer: Linux 3.8.0-34-generic ehci_hcd
[ 1.072624] usb usb1: SerialNumber: 0000:00:12.2
[ 1.072730] hub 1-0:1.0: USB hub found
[ 1.072734] hub 1-0:1.0: 6 ports detected
[ 1.072849] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.072855] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.072858] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.072870] ehci-pci 0000:00:13.2: debug port 1
[ 1.072902] ehci-pci 0000:00:13.2: irq 19, io mem 0xf9fff400
[ 1.084589] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.084604] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.084606] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.084607] usb usb2: Product: EHCI Host Controller
[ 1.084609] usb usb2: Manufacturer: Linux 3.8.0-34-generic ehci_hcd
[ 1.084610] usb usb2: SerialNumber: 0000:00:13.2
[ 1.084700] hub 2-0:1.0: USB hub found
[ 1.084703] hub 2-0:1.0: 6 ports detected
[ 1.084821] ehci-platform: EHCI generic platform driver
[ 1.084830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.084866] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.084872] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.084895] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9ffe000
[ 1.144570] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.144572] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.144574] usb usb3: Product: OHCI Host Controller
[ 1.144575] usb usb3: Manufacturer: Linux 3.8.0-34-generic ohci_hcd
[ 1.144576] usb usb3: SerialNumber: 0000:00:12.0
[ 1.144663] hub 3-0:1.0: USB hub found
[ 1.144668] hub 3-0:1.0: 3 ports detected
[ 1.144761] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.144767] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.144782] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9ffd000
[ 1.204552] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.204554] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.204556] usb usb4: Product: OHCI Host Controller
[ 1.204557] usb usb4: Manufacturer: Linux 3.8.0-34-generic ohci_hcd
[ 1.204558] usb usb4: SerialNumber: 0000:00:12.1
[ 1.204643] hub 4-0:1.0: USB hub found
[ 1.204650] hub 4-0:1.0: 3 ports detected
[ 1.204750] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.204756] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.204776] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9ffc000
[ 1.264540] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.264542] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.264544] usb usb5: Product: OHCI Host Controller
[ 1.264545] usb usb5: Manufacturer: Linux 3.8.0-34-generic ohci_hcd
[ 1.264546] usb usb5: SerialNumber: 0000:00:13.0
[ 1.264636] hub 5-0:1.0: USB hub found
[ 1.264643] hub 5-0:1.0: 3 ports detected
[ 1.264736] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.264741] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.264754] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9ffb000
[ 1.324524] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.324527] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.324528] usb usb6: Product: OHCI Host Controller
[ 1.324529] usb usb6: Manufacturer: Linux 3.8.0-34-generic ohci_hcd
[ 1.324530] usb usb6: SerialNumber: 0000:00:13.1
[ 1.324624] hub 6-0:1.0: USB hub found
[ 1.324630] hub 6-0:1.0: 3 ports detected
[ 1.324723] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.324727] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.324742] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ffa000
[ 1.384514] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.384517] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.384518] usb usb7: Product: OHCI Host Controller
[ 1.384519] usb usb7: Manufacturer: Linux 3.8.0-34-generic ohci_hcd
[ 1.384520] usb usb7: SerialNumber: 0000:00:14.5
[ 1.384653] hub 7-0:1.0: USB hub found
[ 1.384660] hub 7-0:1.0: 2 ports detected
[ 1.384719] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.384774] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.384775] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.384906] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.384979] mousedev: PS/2 mouse device common for all mice
[ 1.385112] rtc_cmos 00:01: RTC can wake from S4
[ 1.385215] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.385241] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.385308] device-mapper: uevent: version 1.0.3
[ 1.385353] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.385424] cpuidle: using governor ladder
[ 1.385522] cpuidle: using governor menu
[ 1.385525] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.385527] EFI Variables Facility v0.08 2004-May-17
[ 1.385721] ashmem: initialized
[ 1.385824] TCP: cubic registered
[ 1.385882] NET: Registered protocol family 10
[ 1.386008] NET: Registered protocol family 17
[ 1.386014] Key type dns_resolver registered
[ 1.386304] Loading module verification certificates
[ 1.387074] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 253c4f779a04eefe395aecbd137448018b69410b'
[ 1.387081] registered taskstats version 1
[ 1.390224] Key type trusted registered
[ 1.391906] Key type encrypted registered
[ 1.393931] rtc_cmos 00:01: setting system clock to 2013-12-11 04:55:49 UTC (1386737749)
[ 1.393976] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
[ 1.394720] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.395283] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.395284] EDD information not available.
[ 1.396565] Freeing unused kernel memory: 1016k freed
[ 1.396802] Write protecting the kernel read-only data: 12288k
[ 1.397926] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.399248] Freeing unused kernel memory: 1008k freed
[ 1.401969] Freeing unused kernel memory: 1008k freed
[ 1.417184] udevd[121]: starting version 175
[ 1.430962] Disabling lock debugging due to kernel taint
[ 1.434066] ahci 0000:00:11.0: version 3.0
[ 1.434228] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.434232] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.435928] scsi0 : ahci
[ 1.436022] scsi1 : ahci
[ 1.436087] scsi2 : ahci
[ 1.436409] scsi3 : ahci
[ 1.437202] scsi4 : ahci
[ 1.437285] scsi5 : ahci
[ 1.437333] ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 22
[ 1.437336] ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 22
[ 1.437339] ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00 irq 22
[ 1.437342] ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 22
[ 1.437344] ata5: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9ffff00 irq 22
[ 1.437347] ata6: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9ffff80 irq 22
[ 1.438031] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.438250] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.438400] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc9000304c000, 20:cf:30:be:e0:0f, XID 083000c0 IRQ 42
[ 1.438403] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.440736] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.441407] scsi6 : pata_atiixp
[ 1.441793] scsi7 : pata_atiixp
[ 1.442010] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.442013] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.700466] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 1.756549] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.756635] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.756674] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.835141] usb 1-6: New USB device found, idVendor=04b8, idProduct=0131
[ 1.835144] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.835146] usb 1-6: Product: EPSON Scanner
[ 1.835148] usb 1-6: Manufacturer: EPSON
[ 1.928462] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.928491] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.928520] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.930079] ata2.00: ATAPI: Optiarc DVD RW AD-7260S, 1.01, max UDMA/100
[ 1.930106] ata3.00: ATAPI: Optiarc DVD RW AD-7260S, 1.01, max UDMA/100
[ 1.931975] ata2.00: configured for UDMA/100
[ 1.932007] ata3.00: configured for UDMA/100
[ 1.957255] ata1.00: ATA-8: ST31500341AS, CC1J, max UDMA/133
[ 1.957258] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.999202] ata1.00: configured for UDMA/133
[ 1.999399] scsi 0:0:0:0: Direct-Access ATA ST31500341AS CC1J PQ: 0 ANSI: 5
[ 1.999573] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.999579] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.999832] sd 0:0:0:0: [sda] Write Protect is off
[ 1.999835] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.999872] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.000909] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.01 PQ: 0 ANSI: 5
[ 2.003117] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.003120] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.003231] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.003319] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.004459] tsc: Refined TSC clocksource calibration: 2812.530 MHz
[ 2.004464] Switching to clocksource tsc
[ 2.004640] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.01 PQ: 0 ANSI: 5
[ 2.006625] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.006725] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 2.006838] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 2.040684] sda: sda1 sda2 < sda5 >
[ 2.041123] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.224334] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[ 2.392330] usb 3-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.392333] usb 3-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.392335] usb 3-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.392337] usb 3-2: Manufacturer: Microsoft
[ 2.400362] usbcore: registered new interface driver usbhid
[ 2.400364] usbhid: USB HID core driver
[ 2.401917] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3
[ 2.402048] hid-generic 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:12.0-2/input0
[ 2.656234] usb 3-3: new full-speed USB device number 3 using ohci_hcd
[ 2.831226] usb 3-3: New USB device found, idVendor=04f9, idProduct=0033
[ 2.831229] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.831231] usb 3-3: Product: HL-2140 series
[ 2.831233] usb 3-3: Manufacturer: Brother
[ 2.831234] usb 3-3: SerialNumber: G8J686516
[ 3.223627] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.343235] init: ureadahead main process (306) terminated with status 5
[ 5.686591] Adding 33551356k swap on /dev/sda5. Priority:-1 extents:1 across:33551356k
[ 6.619509] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.766968] udevd[382]: starting version 175
[ 7.586955] lp: driver loaded but no devices found
[ 7.922291] parport_pc 00:04: reported by Plug and Play ACPI
[ 7.922345] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.954600] microcode: CPU0: patch_level=0x010000bf
[ 8.003059] ppdev: user-space parallel port driver
[ 8.011183] wmi: Mapper loaded
[ 8.019091] lp0: using parport0 (interrupt-driven).
[ 8.069444] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20121018/utaddress-251)
[ 8.069451] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 2 (20121018/utaddress-251)
[ 8.069455] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.101866] microcode: CPU0: new patch_level=0x010000dc
[ 8.101885] microcode: CPU1: patch_level=0x010000bf
[ 8.101893] microcode: CPU1: new patch_level=0x010000dc
[ 8.101906] microcode: CPU2: patch_level=0x010000bf
[ 8.101914] microcode: CPU2: new patch_level=0x010000dc
[ 8.101929] microcode: CPU3: patch_level=0x010000bf
[ 8.101939] microcode: CPU3: new patch_level=0x010000dc
[ 8.101954] microcode: CPU4: patch_level=0x010000bf
[ 8.101963] microcode: CPU4: new patch_level=0x010000dc
[ 8.101967] microcode: CPU5: patch_level=0x010000bf
[ 8.101972] microcode: CPU5: new patch_level=0x010000dc
[ 8.102028] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 8.136597] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 8.136652] sp5100_tco: PCI Revision ID: 0x3c
[ 8.136671] sp5100_tco: failed to find MMIO address, giving up.
[ 8.145293] MCE: In-kernel MCE decoding enabled.
[ 8.283556] EDAC MC: Ver: 3.0.0
[ 8.427252] kvm: disabled by bios
[ 8.439406] kvm: disabled by bios
[ 8.451407] kvm: disabled by bios
[ 8.455331] kvm: disabled by bios
[ 8.459312] kvm: disabled by bios
[ 8.463341] kvm: disabled by bios
[ 8.487588] AMD64 EDAC driver v3.4.0
[ 8.487623] EDAC amd64: DRAM ECC disabled.
[ 8.487634] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 8.487634] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 8.487634] (Note that use of the override may cause unknown side effects.)
[ 8.514770] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.039715] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 9.039802] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 9.039865] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 9.039923] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 9.039980] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 9.040035] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 9.040097] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.040150] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 9.040417] hda_intel: Disabling MSI
[ 9.040429] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 9.265583] type=1400 audit(1386737757.367:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=691 comm="apparmor_parser"
[ 9.265597] type=1400 audit(1386737757.367:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=708 comm="apparmor_parser"
[ 9.265932] type=1400 audit(1386737757.367:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=691 comm="apparmor_parser"
[ 9.265949] type=1400 audit(1386737757.367:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=708 comm="apparmor_parser"
[ 9.266133] type=1400 audit(1386737757.367:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=691 comm="apparmor_parser"
[ 9.266151] type=1400 audit(1386737757.367:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=708 comm="apparmor_parser"
[ 9.487785] usblp 3-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0033
[ 9.487815] usbcore: registered new interface driver usblp
[ 9.643128] init: failsafe main process (799) killed by TERM signal
[ 9.910614] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 9.910703] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 9.910762] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 9.910819] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 10.175898] type=1400 audit(1386737758.279:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=904 comm="apparmor_parser"
[ 10.176314] type=1400 audit(1386737758.279:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=904 comm="apparmor_parser"
[ 10.176553] type=1400 audit(1386737758.279:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=904 comm="apparmor_parser"
[ 10.388274] nvidia: module license 'NVIDIA' taints kernel.
[ 10.399928] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 10.400070] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
[ 10.827599] type=1400 audit(1386737758.931:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=910 comm="apparmor_parser"
[ 12.746767] Bluetooth: Core ver 2.16
[ 12.746788] NET: Registered protocol family 31
[ 12.746790] Bluetooth: HCI device and connection manager initialized
[ 12.746798] Bluetooth: HCI socket layer initialized
[ 12.746800] Bluetooth: L2CAP socket layer initialized
[ 12.746805] Bluetooth: SCO socket layer initialized
[ 12.901778] Bluetooth: RFCOMM TTY layer initialized
[ 12.901790] Bluetooth: RFCOMM socket layer initialized
[ 12.901792] Bluetooth: RFCOMM ver 1.11
[ 12.910140] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.910144] Bluetooth: BNEP filters: protocol multicast
[ 12.910150] Bluetooth: BNEP socket layer initialized
[ 15.005555] init: udev-fallback-graphics main process (1221) terminated with status 1
[ 15.016343] init: plymouth-stop pre-start process (1238) terminated with status 1
[ 15.017520] init: plymouth-splash main process (1242) terminated with status 1
[ 15.582485] r8169 0000:02:00.0 eth0: link down
[ 15.582493] r8169 0000:02:00.0 eth0: link down
[ 15.582525] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.582707] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.077720] r8169 0000:02:00.0 eth0: link up
[ 18.077729] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 92.291500] audit_printk_skb: 48 callbacks suppressed
[ 92.291505] type=1400 audit(1386737842.363:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1022 comm="cupsd" pid=1022 comm="cupsd" capability=36 capname="block_suspend"
[ 200.046535] type=1400 audit(1386737950.143:29): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1022 comm="cupsd" pid=1022 comm="cupsd" capability=36 capname="block_suspend"
[ 216.182054] usb 1-6: USB disconnect, device number 4
[ 227.791727] usb 1-6: new high-speed USB device number 5 using ehci-pci
[ 227.926648] usb 1-6: New USB device found, idVendor=04b8, idProduct=0131
[ 227.926664] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 227.926671] usb 1-6: Product: EPSON Scanner
[ 227.926677] usb 1-6: Manufacturer: EPSON
[ 232.461443] type=1400 audit(1386737982.563:30): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1022 comm="cupsd" pid=1022 comm="cupsd" capability=36 capname="block_suspend"
[ 303.459767] type=1400 audit(1386738053.579:31): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1022 comm="cupsd" pid=1022 comm="cupsd" capability=36 capname="block_suspend"
[ 310.870296] usb 1-6: USB disconnect, device number 5
[ 312.555923] usb 1-6: new high-speed USB device number 6 using ehci-pci
[ 312.690851] usb 1-6: New USB device found, idVendor=04b8, idProduct=0131
[ 312.690863] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 312.690870] usb 1-6: Product: EPSON Scanner
[ 312.690876] usb 1-6: Manufacturer: EPSON
[ 398.949263] usb 1-6: USB disconnect, device number 6
[ 402.195303] type=1400 audit(1386738152.339:32): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1022 comm="cupsd" pid=1022 comm="cupsd" capability=36 capname="block_suspend"
[ 888.721359] usb 1-6: new high-speed USB device number 7 using ehci-pci
[ 888.856334] usb 1-6: New USB device found, idVendor=04b8, idProduct=0131
[ 888.856345] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 888.856353] usb 1-6: Product: EPSON Scanner
[ 888.856359] usb 1-6: Manufacturer: EPSON
[ 1063.912153] type=1400 audit(1386738814.207:33): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1022 comm="cupsd" pid=1022 comm="cupsd" capability=36 capname="block_suspend"
[19518.017062] usb 1-6: usbfs: interface 0 claimed by usbfs while 'xsane' sets config #1
[19518.064952] usb 1-6: usbfs: interface 0 claimed by usbfs while 'xsane' sets config #1
[20074.843903] usb 2-6: new high-speed USB device number 2 using ehci-pci
[20074.978726] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[20074.978738] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20074.978745] usb 2-6: Product: iPhone
[20074.978752] usb 2-6: Manufacturer: Apple Inc.
[20074.978757] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[20076.319743] ipheth 2-6:4.2: ipheth_get_macaddr: usb_control_msg: -110
[20076.319780] ipheth: probe of 2-6:4.2 failed with error -110
[20076.319863] usbcore: registered new interface driver ipheth
[20098.075563] usb 2-6: USB disconnect, device number 2
[20098.462411] hub 2-0:1.0: unable to enumerate USB device on port 6
[20098.798316] usb 2-6: new high-speed USB device number 4 using ehci-pci
[20098.933591] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[20098.933603] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20098.933610] usb 2-6: Product: iPhone
[20098.933616] usb 2-6: Manufacturer: Apple Inc.
[20098.933622] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[20098.948768] ipheth 2-6:4.2: Apple iPhone USB Ethernet device attached
[20099.028479] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20099.029245] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20112.567613] usb 2-6: USB disconnect, device number 4
[20112.587158] ipheth 2-6:4.2: Apple iPhone USB Ethernet now disconnected
[20112.975017] hub 2-0:1.0: unable to enumerate USB device on port 6
[20113.310916] usb 2-6: new high-speed USB device number 6 using ehci-pci
[20113.446151] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[20113.446163] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20113.446171] usb 2-6: Product: iPhone
[20113.446177] usb 2-6: Manufacturer: Apple Inc.
[20113.446182] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[20113.465645] ipheth 2-6:4.2: Apple iPhone USB Ethernet device attached
[20113.500577] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20113.501348] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20119.911491] ipheth 2-6:4.2: ipheth_rcvbulk_callback: urb status: -71
[20120.178793] usb 2-6: USB disconnect, device number 6
[20120.186671] ipheth 2-6:4.2: ipheth_carrier_set: usb_control_msg: -71
[20120.196432] ipheth 2-6:4.2: Apple iPhone USB Ethernet now disconnected
[20120.529244] usb 2-6: new high-speed USB device number 7 using ehci-pci
[20120.665126] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[20120.665139] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20120.665146] usb 2-6: Product: iPhone
[20120.665152] usb 2-6: Manufacturer: Apple Inc.
[20120.665158] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[20120.681005] ipheth 2-6:4.2: Apple iPhone USB Ethernet device attached
[20120.715515] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20120.716231] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20138.463259] usb 2-6: USB disconnect, device number 7
[20138.485039] ipheth 2-6:4.2: Apple iPhone USB Ethernet now disconnected
[20138.852941] usb 2-6: new high-speed USB device number 8 using ehci-pci
[20138.989044] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[20138.989056] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20138.989063] usb 2-6: Product: iPhone
[20138.989069] usb 2-6: Manufacturer: Apple Inc.
[20138.989075] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[20139.004233] ipheth 2-6:4.2: Apple iPhone USB Ethernet device attached
[20139.036459] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20139.037225] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20144.725980] usb 2-6: USB disconnect, device number 8
[20144.747617] ipheth 2-6:4.2: Apple iPhone USB Ethernet now disconnected
[20145.319454] usb 2-6: new high-speed USB device number 9 using ehci-pci
[20145.454636] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[20145.454647] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20145.454654] usb 2-6: Product: iPhone
[20145.454660] usb 2-6: Manufacturer: Apple Inc.
[20145.454666] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[20145.469630] ipheth 2-6:4.2: Apple iPhone USB Ethernet device attached
[20145.502651] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20145.503432] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20170.127626] usb 2-6: USB disconnect, device number 9
[20170.141764] ipheth 2-6:4.2: Apple iPhone USB Ethernet now disconnected
[20170.529546] hub 2-0:1.0: unable to enumerate USB device on port 6
[20170.933456] usb 6-3: new full-speed USB device number 2 using ohci_hcd
[20171.092525] usb 6-3: not running at top speed; connect to a high speed hub
[20171.116528] usb 6-3: New USB device found, idVendor=05ac, idProduct=129c
[20171.116540] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20171.116547] usb 6-3: Product: iPhone
[20171.116553] usb 6-3: Manufacturer: Apple Inc.
[20171.116559] usb 6-3: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[20171.156920] ipheth 6-3:4.2: Apple iPhone USB Ethernet device attached
[20171.197533] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20171.198251] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20178.640709] ipheth 6-3:4.2: ipheth_rcvbulk_callback: urb status: -62
[20178.926202] usb 6-3: USB disconnect, device number 2
[20178.947722] ipheth 6-3:4.2: Apple iPhone USB Ethernet now disconnected
[20179.391481] usb 2-6: new high-speed USB device number 11 using ehci-pci
[20179.530181] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[20179.530193] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20179.530200] usb 2-6: Product: iPhone
[20179.530207] usb 2-6: Manufacturer: Apple Inc.
[20179.530212] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[20179.579484] ipheth 2-6:4.2: Apple iPhone USB Ethernet device attached
[20179.614803] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[20179.615578] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[21574.072148] usb 2-6: USB disconnect, device number 11
[21574.081725] ipheth 2-6:4.2: Apple iPhone USB Ethernet now disconnected
[21580.396259] usb 2-6: new high-speed USB device number 12 using ehci-pci
[21580.531395] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[21580.531407] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[21580.531414] usb 2-6: Product: iPhone
[21580.531420] usb 2-6: Manufacturer: Apple Inc.
[21580.531426] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[21580.570388] ipheth 2-6:4.2: Apple iPhone USB Ethernet device attached
[21580.604801] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[21580.605541] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[21587.149606] usb 2-6: USB disconnect, device number 12
[21587.163560] ipheth 2-6:4.2: Apple iPhone USB Ethernet now disconnected
[21587.530546] usb 2-6: new high-speed USB device number 13 using ehci-pci
[21587.665782] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[21587.665794] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[21587.665801] usb 2-6: Product: iPhone
[21587.665807] usb 2-6: Manufacturer: Apple Inc.
[21587.665813] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[21587.678819] ipheth 2-6:4.2: Apple iPhone USB Ethernet device attached
[21587.706793] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[21587.707693] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[22795.608611] usb 2-6: USB disconnect, device number 13
[22795.620405] ipheth 2-6:4.2: Apple iPhone USB Ethernet now disconnected
[22817.979163] usb 2-6: new high-speed USB device number 14 using ehci-pci
[22818.115775] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[22818.115786] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[22818.115793] usb 2-6: Product: iPhone
[22818.115800] usb 2-6: Manufacturer: Apple Inc.
[22818.115805] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[22819.379043] ipheth 2-6:4.2: ipheth_get_macaddr: usb_control_msg: -110
[22819.379078] ipheth: probe of 2-6:4.2 failed with error -110
[22843.734680] usb 2-6: USB disconnect, device number 14
[22846.944366] usb 2-6: new high-speed USB device number 15 using ehci-pci
[22847.079607] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[22847.079618] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[22847.079625] usb 2-6: Product: iPhone
[22847.079631] usb 2-6: Manufacturer: Apple Inc.
[22847.079636] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[22847.242578] ipheth 2-6:4.2: Apple iPhone USB Ethernet device attached
[22847.278110] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[22847.278822] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[22967.363647] usb 2-6: USB disconnect, device number 15
[22967.387453] ipheth 2-6:4.2: Apple iPhone USB Ethernet now disconnected
[22968.037401] usb 6-3: new full-speed USB device number 3 using ohci_hcd
[22968.196609] usb 6-3: not running at top speed; connect to a high speed hub
[22968.220608] usb 6-3: New USB device found, idVendor=05ac, idProduct=129c
[22968.220619] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[22968.220625] usb 6-3: Product: iPhone
[22968.220631] usb 6-3: Manufacturer: Apple Inc.
[22968.220637] usb 6-3: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[22968.259983] ipheth 6-3:4.2: Apple iPhone USB Ethernet device attached
[22968.298632] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[22968.299444] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[22975.316914] ipheth 6-3:4.2: ipheth_rcvbulk_callback: urb status: -62
[22975.387719] usb 6-3: USB disconnect, device number 3
[22975.408045] ipheth 6-3:4.2: Apple iPhone USB Ethernet now disconnected
[22975.951605] usb 2-6: new high-speed USB device number 17 using ehci-pci
[22976.086676] usb 2-6: New USB device found, idVendor=05ac, idProduct=129c
[22976.086687] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[22976.086694] usb 2-6: Product: iPhone
[22976.086700] usb 2-6: Manufacturer: Apple Inc.
[22976.086705] usb 2-6: SerialNumber: 9f40f629a9269cec318d67b5f84e3ec9c737d2d6
[22976.123297] ipheth 2-6:4.2: Apple iPhone USB Ethernet device attached
[22976.158837] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[22976.159625] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[23112.452607] usb 2-6: USB disconnect, device number 17
[23112.463451] ipheth 2-6:4.2: Apple iPhone USB Ethernet now disconnected
[69562.144808] usb 2-6: new high-speed USB device number 18 using ehci-pci
[69562.425924] usb 2-6: New USB device found, idVendor=048d, idProduct=1336
[69562.425935] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[69562.425942] usb 2-6: Product: Mass Storage Device
[69562.425948] usb 2-6: Manufacturer: Generic
[69562.425954] usb 2-6: SerialNumber: 00000000000006
[69562.484139] Initializing USB Mass Storage driver...
[69562.484516] scsi8 : usb-storage 2-6:1.0
[69562.484789] usbcore: registered new interface driver usb-storage
[69562.484794] USB Mass Storage support registered.
[69564.520113] scsi 8:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
[69564.522449] sd 8:0:0:0: Attached scsi generic sg3 type 0
[69564.523445] sd 8:0:0:0: [sdb] 62552064 512-byte logical blocks: (32.0 GB/29.8 GiB)
[69564.524703] sd 8:0:0:0: [sdb] Write Protect is off
[69564.524713] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[69564.525968] sd 8:0:0:0: [sdb] No Caching mode page found
[69564.525980] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[69564.530045] sd 8:0:0:0: [sdb] No Caching mode page found
[69564.530056] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[69564.531591] sdb: sdb1
[69564.535044] sd 8:0:0:0: [sdb] No Caching mode page found
[69564.535056] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[69564.535065] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[70553.121010] usb 2-6: USB disconnect, device number 18
[101629.217194] usblp0: removed
[101653.481977] usblp 3-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0033
[101654.541589] usblp0: removed
[101654.552724] usblp 3-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0033
[101705.565356] usblp0: removed
[101728.329530] usblp 3-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0033