dmesg - Car100
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Nov 22 03:15:09 UTC 2013
Command line: ro root=/dev/mapper/vgsys-lvolroot rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=it rd_LVM_LV=vgsys/lvolswap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vgsys/lvolroot rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bddde000 (usable)
BIOS-e820: 00000000bddde000 - 00000000bde0e000 (ACPI data)
BIOS-e820: 00000000bde0e000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000143efff000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF4F20
DMI: HP ProLiant DL385p Gen8, BIOS A28 06/09/2013
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x143efff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000143f000000 aka 82928M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbddde max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bddde000
0000000000 - 0080000000 page 1G
0080000000 - 00bdc00000 page 2M
00bdc00000 - 00bddde000 page 4k
kernel direct mapping tables up to bddde000 @ 8000-b000
init_memory_mapping: 0000000100000000-000000143efff000
0100000000 - 1400000000 page 1G
1400000000 - 143ee00000 page 2M
143ee00000 - 143efff000 page 4k
kernel direct mapping tables up to 143efff000 @ a000-d000
RAMDISK: 36f5c000 - 37fef7ce
ACPI: RSDP 00000000000f4ee0 00024 (v02 HP )
ACPI: XSDT 00000000bdde1880 000D4 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000bdde1980 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI: DSDT 00000000bdde1a80 0D2F7 (v01 HP DSDT 00000001 INTL 20061109)
ACPI: FACS 00000000bddde140 00040
ACPI: SPCR 00000000bddde180 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000bddde200 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000bddde240 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000bddde280 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000bddde2c0 00230 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000bddde500 0016A (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 00000000bddde800 00320 (v02 AMD AGESA 00000001 AMD 00000001)
ACPI: FFFF 00000000bdddf000 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000bdddf180 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000bdddf1c0 0018C (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000bdddf380 00064 (v02 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SLIT 00000000bdddf400 0003C (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: PCCT 00000000bdde1800 0006E (v01 HP Proliant 00000001 PH 0000504D)
ACPI: IVRS 00000000bdddf800 001F0 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: SSDT 00000000bddeed80 00125 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000bddeeec0 0BF06 (v03 HP pci1cmn 00000002 INTL 20120503)
ACPI: SSDT 00000000bddfae00 00076 (v03 HP CRSPCI1 00000002 HP 00000001)
ACPI: SSDT 00000000bddfae80 00701 (v01 HP pcc 00000001 INTL 20120503)
ACPI: SSDT 00000000bddfb5c0 00377 (v01 HP pmab 00000001 INTL 20120503)
ACPI: SSDT 00000000bddfb940 05524 (v01 HP pcc2 00000001 INTL 20120503)
ACPI: SSDT 00000000bde00e80 00BA4 (v02 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 32 -> Node 0
SRAT: PXM 0 -> APIC 33 -> Node 0
SRAT: PXM 0 -> APIC 34 -> Node 0
SRAT: PXM 0 -> APIC 35 -> Node 0
SRAT: PXM 0 -> APIC 36 -> Node 0
SRAT: PXM 0 -> APIC 37 -> Node 0
SRAT: PXM 0 -> APIC 38 -> Node 0
SRAT: PXM 0 -> APIC 39 -> Node 0
SRAT: PXM 1 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 43 -> Node 1
SRAT: PXM 1 -> APIC 44 -> Node 1
SRAT: PXM 1 -> APIC 45 -> Node 1
SRAT: PXM 1 -> APIC 46 -> Node 1
SRAT: PXM 1 -> APIC 47 -> Node 1
SRAT: PXM 2 -> APIC 64 -> Node 2
SRAT: PXM 2 -> APIC 65 -> Node 2
SRAT: PXM 2 -> APIC 66 -> Node 2
SRAT: PXM 2 -> APIC 67 -> Node 2
SRAT: PXM 2 -> APIC 68 -> Node 2
SRAT: PXM 2 -> APIC 69 -> Node 2
SRAT: PXM 2 -> APIC 70 -> Node 2
SRAT: PXM 2 -> APIC 71 -> Node 2
SRAT: PXM 3 -> APIC 72 -> Node 3
SRAT: PXM 3 -> APIC 73 -> Node 3
SRAT: PXM 3 -> APIC 74 -> Node 3
SRAT: PXM 3 -> APIC 75 -> Node 3
SRAT: PXM 3 -> APIC 76 -> Node 3
SRAT: PXM 3 -> APIC 77 -> Node 3
SRAT: PXM 3 -> APIC 78 -> Node 3
SRAT: PXM 3 -> APIC 79 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-c0000000
SRAT: Node 0 PXM 0 100000000-640000000
SRAT: Node 1 PXM 1 640000000-a40000000
SRAT: Node 2 PXM 2 a40000000-1040000000
SRAT: Node 3 PXM 3 1040000000-143f000000
NUMA: Allocated memnodemap from c000 - 34800
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000640000000
NODE_DATA [0000000000034800 - 00000000000687ff]
bootmap [0000000000100000 - 00000000001c7fff] pages c8
(10 early reservations) ==> bootmem [0000000000 - 0640000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201faa4] TEXT DATA BSS ==> [0001000000 - 000201faa4]
#3 [0036f5c000 - 0037fef7ce] RAMDISK ==> [0036f5c000 - 0037fef7ce]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [0002020000 - 00020203f3] BRK ==> [0002020000 - 00020203f3]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000]
#8 [0000001000 - 000000103c] ACPI SLIT ==> [0000001000 - 000000103c]
#9 [000000c000 - 0000034800] MEMNODEMAP ==> [000000c000 - 0000034800]
Bootmem setup node 1 0000000640000000-0000000a40000000
NODE_DATA [0000000640000040 - 000000064003403f]
bootmap [0000000640035000 - 00000006400b4fff] pages 80
(10 early reservations) ==> bootmem [0640000000 - 0a40000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000201faa4] TEXT DATA BSS
#3 [0036f5c000 - 0037fef7ce] RAMDISK
#4 [000009ec00 - 0000100000] BIOS reserved
#5 [0002020000 - 00020203f3] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000c000] PGTABLE
#8 [0000001000 - 000000103c] ACPI SLIT
#9 [000000c000 - 0000034800] MEMNODEMAP
Bootmem setup node 2 0000000a40000000-0000001040000000
NODE_DATA [0000000a40000080 - 0000000a4003407f]
bootmap [0000000a40035000 - 0000000a400f4fff] pages c0
(10 early reservations) ==> bootmem [0a40000000 - 1040000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000201faa4] TEXT DATA BSS
#3 [0036f5c000 - 0037fef7ce] RAMDISK
#4 [000009ec00 - 0000100000] BIOS reserved
#5 [0002020000 - 00020203f3] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000c000] PGTABLE
#8 [0000001000 - 000000103c] ACPI SLIT
#9 [000000c000 - 0000034800] MEMNODEMAP
Bootmem setup node 3 0000001040000000-000000143efff000
NODE_DATA [00000010400000c0 - 00000010400340bf]
bootmap [0000001040035000 - 00000010400b4dff] pages 80
(10 early reservations) ==> bootmem [1040000000 - 143efff000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000201faa4] TEXT DATA BSS
#3 [0036f5c000 - 0037fef7ce] RAMDISK
#4 [000009ec00 - 0000100000] BIOS reserved
#5 [0002020000 - 00020203f3] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000c000] PGTABLE
#8 [0000001000 - 000000103c] ACPI SLIT
#9 [000000c000 - 0000034800] MEMNODEMAP
found SMP MP-table at [ffff8800000f4f60] f4f60
Reserving 134MB of memory at 48MB for crashkernel (System RAM: 82927MB)
[ffffea0000000000-ffffea000f5fffff] PMD -> [ffff880028600000-ffff880036dfffff] on node 0
[ffffea000f600000-ffffea0015dfffff] PMD -> [ffff880038000000-ffff88003e7fffff] on node 0
[ffffea0015e00000-ffffea0023dfffff] PMD -> [ffff880640200000-ffff88064e1fffff] on node 1
[ffffea0023e00000-ffffea0038dfffff] PMD -> [ffff880a40200000-ffff880a551fffff] on node 2
[ffffea0038e00000-ffffea003fffffff] PMD -> [ffff881040200000-ffff8810473fffff] on node 3
[ffffea0040000000-ffffea0046dfffff] PMD -> [ffff881047600000-ffff88104e3fffff] on node 3
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0143efff
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000001 -> 0x0000009e
0: 0x00000100 -> 0x000bddde
0: 0x00100000 -> 0x00640000
1: 0x00640000 -> 0x00a40000
2: 0x00a40000 -> 0x01040000
3: 0x01040000 -> 0x0143efff
On node 0 totalpages: 6282619
DMA zone: 56 pages used for memmap
DMA zone: 144 pages reserved
DMA zone: 3797 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759318 pages, LIFO batch:31
Normal zone: 75264 pages used for memmap
Normal zone: 5429760 pages, LIFO batch:31
On node 1 totalpages: 4194304
Normal zone: 57344 pages used for memmap
Normal zone: 4136960 pages, LIFO batch:31
On node 2 totalpages: 6291456
Normal zone: 86016 pages used for memmap
Normal zone: 6205440 pages, LIFO batch:31
On node 3 totalpages: 4190207
Normal zone: 57288 pages used for memmap
Normal zone: 4132919 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x920
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x40] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x41] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x42] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x43] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x44] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x45] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x46] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x47] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x48] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x49] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x4a] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x4b] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x4c] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x4d] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x4e] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2f] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x4f] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfaffc000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 33, address 0xfaffc000, GSI 24-55
ACPI: IOAPIC (id[0x0a] address[0xfddfc000] gsi_base[56])
IOAPIC[2]: apic_id 10, version 33, address 0xfddfc000, GSI 56-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x1166a201 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 88
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bddde000 - 00000000bde0e000
PM: Registered nosave memory: 00000000bde0e000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:4
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144
pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 [1] 01 03 05 07 09 11 13 15
pcpu-alloc: [2] 16 18 20 22 24 26 28 30 [3] 17 19 21 23 25 27 29 31
Built 4 zonelists in Zone order, mobility grouping on. Total pages: 20668194
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vgsys-lvolroot rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=it rd_LVM_LV=vgsys/lvolswap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=134M@0M rd_LVM_LV=vgsys/lvolroot rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ f39c000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 82445484k/84918268k available (5325k kernel code, 1083924k absent, 1388860k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1752
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 335544320 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2294.061 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.12 BogoMIPS (lpj=2294061)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 00be000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21769 entries in 86 pages
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Opteron(tm) Processor 6376 stepping 00
Performance Events: Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR c0010200 is 430076)
AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 2, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 2, Processors #3 Ok.
Booting Node 0, Processors #4 Ok.
Booting Node 2, Processors #5 Ok.
Booting Node 0, Processors #6 Ok.
Booting Node 2, Processors #7 Ok.
Booting Node 0, Processors #8 Ok.
Booting Node 2, Processors #9 Ok.
Booting Node 0, Processors #10 Ok.
Booting Node 2, Processors #11 Ok.
Booting Node 0, Processors #12 Ok.
Booting Node 2, Processors #13 Ok.
Booting Node 0, Processors #14 Ok.
Booting Node 2, Processors #15 Ok.
Booting Node 1, Processors #16 Ok.
Booting Node 3, Processors #17 Ok.
Booting Node 1, Processors #18 Ok.
Booting Node 3, Processors #19 Ok.
Booting Node 1, Processors #20 Ok.
Booting Node 3, Processors #21 Ok.
Booting Node 1, Processors #22 Ok.
Booting Node 3, Processors #23 Ok.
Booting Node 1, Processors #24 Ok.
Booting Node 3, Processors #25 Ok.
Booting Node 1, Processors #26 Ok.
Booting Node 3, Processors #27 Ok.
Booting Node 1, Processors #28 Ok.
Booting Node 3, Processors #29 Ok.
Booting Node 1, Processors #30 Ok.
Booting Node 3, Processors #31 Ok.
Brought up 32 CPUs
Total of 32 processors activated (146817.21 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
PCI: MCFG area at c0000000 reserved in E820
PCI: Using MMCONFIG at c0000000 - cfffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A08:00: host bridge window [mem 0xfaf00000-0xfdcfffff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed03fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xfaf00000-0xfdcfffff]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed03fff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0x1000-0x1007]
pci 0000:00:11.0: reg 14: [io 0x1008-0x100b]
pci 0000:00:11.0: reg 18: [io 0x1010-0x1017]
pci 0000:00:11.0: reg 1c: [io 0x1018-0x101b]
pci 0000:00:11.0: reg 20: [io 0x1020-0x102f]
pci 0000:00:11.0: reg 24: [mem 0xfc4f0000-0xfc4f03ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: reg 10: [mem 0xfc4e0000-0xfc4e0fff]
pci 0000:00:12.1: reg 10: [mem 0xfc4d0000-0xfc4d0fff]
pci 0000:00:12.2: reg 10: [mem 0xfc4c0000-0xfc4c00ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfc4b0000-0xfc4b0fff]
pci 0000:00:13.1: reg 10: [mem 0xfc4a0000-0xfc4a0fff]
pci 0000:00:13.2: reg 10: [mem 0xfc490000-0xfc4900ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:14.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:14.1: reg 20: [io 0x0500-0x050f]
pci 0000:03:00.0: reg 10: [mem 0xfd800000-0xfd8fffff 64bit]
pci 0000:03:00.0: reg 18: [mem 0xfd7f0000-0xfd7f03ff 64bit]
pci 0000:03:00.0: reg 20: [io 0x4000-0x40ff]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0xfd700000-0xfd8fffff]
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:02:00.0: reg 14: [mem 0xfd6f0000-0xfd6f01ff]
pci 0000:02:00.0: reg 18: [io 0x3400-0x34ff]
pci 0000:02:00.1: reg 10: [mem 0xfb000000-0xfbffffff pref]
pci 0000:02:00.1: reg 14: [mem 0xfd6e0000-0xfd6e3fff]
pci 0000:02:00.1: reg 18: [mem 0xfc800000-0xfcffffff]
pci 0000:02:00.2: reg 10: [io 0x3800-0x38ff]
pci 0000:02:00.2: reg 14: [mem 0xfc7f0000-0xfc7f00ff]
pci 0000:02:00.2: reg 18: [mem 0xfc600000-0xfc6fffff]
pci 0000:02:00.2: reg 1c: [mem 0xfc580000-0xfc5fffff]
pci 0000:02:00.2: reg 20: [mem 0xfc570000-0xfc577fff]
pci 0000:02:00.2: reg 24: [mem 0xfc560000-0xfc567fff]
pci 0000:02:00.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
pci 0000:02:00.2: PME# disabled
pci 0000:02:00.4: reg 20: [io 0x3c00-0x3c1f]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0a.0: bridge window [mem 0xfc500000-0xfd6fffff]
pci 0000:00:0a.0: bridge window [mem 0xfb000000-0xfbffffff 64bit pref]
pci 0000:08:00.0: reg 10: [io 0x5000-0x50ff]
pci 0000:08:00.0: reg 14: [mem 0xfdaf0000-0xfdaf3fff 64bit]
pci 0000:08:00.0: reg 1c: [mem 0xfd900000-0xfd9fffff 64bit]
pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 08-0a]
pci 0000:00:0b.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:0b.0: bridge window [mem 0xfd900000-0xfdafffff]
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xfc3f0000-0xfc3fffff 64bit pref]
pci 0000:04:00.0: reg 18: [mem 0xfc3e0000-0xfc3effff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xfc3d0000-0xfc3dffff 64bit pref]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xfc3c0000-0xfc3cffff 64bit pref]
pci 0000:04:00.1: reg 18: [mem 0xfc3b0000-0xfc3bffff 64bit pref]
pci 0000:04:00.1: reg 20: [mem 0xfc3a0000-0xfc3affff 64bit pref]
pci 0000:04:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.2: reg 10: [mem 0xfc390000-0xfc39ffff 64bit pref]
pci 0000:04:00.2: reg 18: [mem 0xfc380000-0xfc38ffff 64bit pref]
pci 0000:04:00.2: reg 20: [mem 0xfc370000-0xfc37ffff 64bit pref]
pci 0000:04:00.2: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.2: PME# supported from D0 D3hot D3cold
pci 0000:04:00.2: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xfc360000-0xfc36ffff 64bit pref]
pci 0000:04:00.3: reg 18: [mem 0xfc350000-0xfc35ffff 64bit pref]
pci 0000:04:00.3: reg 20: [mem 0xfc340000-0xfc34ffff 64bit pref]
pci 0000:04:00.3: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfc300000-0xfc3fffff 64bit pref]
pci 0000:0b:00.0: reg 10: [io 0x6000-0x60ff]
pci 0000:0b:00.0: reg 14: [mem 0xfdcf0000-0xfdcf3fff 64bit]
pci 0000:0b:00.0: reg 1c: [mem 0xfdb00000-0xfdbfffff 64bit]
pci 0000:0b:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:00:0d.0: PCI bridge to [bus 0b-0d]
pci 0000:00:0d.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:0d.0: bridge window [mem 0xfdb00000-0xfdcfffff]
pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfaf00000-0xfdcfffff] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x1000-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed00000-0xfed03fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G13A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G112._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G12C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G12B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G13D._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-7f])
pci_root PNP0A08:01: host bridge window [mem 0xfdd00000-0xfdffffff]
PCI host bridge to bus 0000:40
pci_bus 0000:40: root bus resource [mem 0xfdd00000-0xfdffffff]
pci 0000:40:02.0: PME# supported from D0 D3hot D3cold
pci 0000:40:02.0: PME# disabled
pci 0000:40:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:40:0b.0: PME# disabled
pci 0000:47:00.0: reg 10: [mem 0xfdff0000-0xfdffffff 64bit pref]
pci 0000:47:00.0: reg 18: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
pci 0000:47:00.0: reg 20: [mem 0xfdfd0000-0xfdfdffff 64bit pref]
pci 0000:47:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:47:00.0: PME# supported from D0 D3hot D3cold
pci 0000:47:00.0: PME# disabled
pci 0000:47:00.1: reg 10: [mem 0xfdfc0000-0xfdfcffff 64bit pref]
pci 0000:47:00.1: reg 18: [mem 0xfdfb0000-0xfdfbffff 64bit pref]
pci 0000:47:00.1: reg 20: [mem 0xfdfa0000-0xfdfaffff 64bit pref]
pci 0000:47:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:47:00.1: PME# supported from D0 D3hot D3cold
pci 0000:47:00.1: PME# disabled
pci 0000:47:00.2: reg 10: [mem 0xfdf90000-0xfdf9ffff 64bit pref]
pci 0000:47:00.2: reg 18: [mem 0xfdf80000-0xfdf8ffff 64bit pref]
pci 0000:47:00.2: reg 20: [mem 0xfdf70000-0xfdf7ffff 64bit pref]
pci 0000:47:00.2: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:47:00.2: PME# supported from D0 D3hot D3cold
pci 0000:47:00.2: PME# disabled
pci 0000:47:00.3: reg 10: [mem 0xfdf60000-0xfdf6ffff 64bit pref]
pci 0000:47:00.3: reg 18: [mem 0xfdf50000-0xfdf5ffff 64bit pref]
pci 0000:47:00.3: reg 20: [mem 0xfdf40000-0xfdf4ffff 64bit pref]
pci 0000:47:00.3: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:47:00.3: PME# supported from D0 D3hot D3cold
pci 0000:47:00.3: PME# disabled
pci 0000:40:02.0: PCI bridge to [bus 47-49]
pci 0000:40:02.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:40:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:40:02.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:41:00.0: reg 10: [mem 0xfdef0000-0xfdefffff 64bit pref]
pci 0000:41:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit pref]
pci 0000:41:00.0: reg 20: [mem 0xfded0000-0xfdedffff 64bit pref]
pci 0000:41:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:41:00.0: PME# supported from D0 D3hot D3cold
pci 0000:41:00.0: PME# disabled
pci 0000:41:00.1: reg 10: [mem 0xfdec0000-0xfdecffff 64bit pref]
pci 0000:41:00.1: reg 18: [mem 0xfdeb0000-0xfdebffff 64bit pref]
pci 0000:41:00.1: reg 20: [mem 0xfdea0000-0xfdeaffff 64bit pref]
pci 0000:41:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:41:00.1: PME# supported from D0 D3hot D3cold
pci 0000:41:00.1: PME# disabled
pci 0000:41:00.2: reg 10: [mem 0xfde90000-0xfde9ffff 64bit pref]
pci 0000:41:00.2: reg 18: [mem 0xfde80000-0xfde8ffff 64bit pref]
pci 0000:41:00.2: reg 20: [mem 0xfde70000-0xfde7ffff 64bit pref]
pci 0000:41:00.2: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:41:00.2: PME# supported from D0 D3hot D3cold
pci 0000:41:00.2: PME# disabled
pci 0000:41:00.3: reg 10: [mem 0xfde60000-0xfde6ffff 64bit pref]
pci 0000:41:00.3: reg 18: [mem 0xfde50000-0xfde5ffff 64bit pref]
pci 0000:41:00.3: reg 20: [mem 0xfde40000-0xfde4ffff 64bit pref]
pci 0000:41:00.3: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:41:00.3: PME# supported from D0 D3hot D3cold
pci 0000:41:00.3: PME# disabled
pci 0000:40:0b.0: PCI bridge to [bus 41-43]
pci 0000:40:0b.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:40:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:40:0b.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G22B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G212._PRT]
pci0000:40: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [I020] (IRQs *24)
ACPI: PCI Interrupt Link [I021] (IRQs *25)
ACPI: PCI Interrupt Link [I022] (IRQs *26)
ACPI: PCI Interrupt Link [I023] (IRQs *27)
ACPI: PCI Interrupt Link [I030] (IRQs *28)
ACPI: PCI Interrupt Link [I031] (IRQs *29)
ACPI: PCI Interrupt Link [I032] (IRQs *30)
ACPI: PCI Interrupt Link [I033] (IRQs *31)
ACPI: PCI Interrupt Link [I040] (IRQs *44)
ACPI: PCI Interrupt Link [I041] (IRQs *45)
ACPI: PCI Interrupt Link [I042] (IRQs *46)
ACPI: PCI Interrupt Link [I043] (IRQs *47)
ACPI: PCI Interrupt Link [I050] (IRQs *48)
ACPI: PCI Interrupt Link [I051] (IRQs *49)
ACPI: PCI Interrupt Link [I052] (IRQs *50)
ACPI: PCI Interrupt Link [I053] (IRQs *51)
ACPI: PCI Interrupt Link [I060] (IRQs *47)
ACPI: PCI Interrupt Link [I061] (IRQs *44)
ACPI: PCI Interrupt Link [I062] (IRQs *45)
ACPI: PCI Interrupt Link [I063] (IRQs *46)
ACPI: PCI Interrupt Link [I070] (IRQs *24)
ACPI: PCI Interrupt Link [I071] (IRQs *25)
ACPI: PCI Interrupt Link [I072] (IRQs *26)
ACPI: PCI Interrupt Link [I073] (IRQs *27)
ACPI: PCI Interrupt Link [I090] (IRQs *24)
ACPI: PCI Interrupt Link [I091] (IRQs *24)
ACPI: PCI Interrupt Link [I092] (IRQs *24)
ACPI: PCI Interrupt Link [I093] (IRQs *24)
ACPI: PCI Interrupt Link [I0A0] (IRQs *24)
ACPI: PCI Interrupt Link [I0A1] (IRQs *25)
ACPI: PCI Interrupt Link [I0A2] (IRQs *26)
ACPI: PCI Interrupt Link [I0A3] (IRQs *27)
ACPI: PCI Interrupt Link [I0B0] (IRQs *32)
ACPI: PCI Interrupt Link [I0B1] (IRQs *33)
ACPI: PCI Interrupt Link [I0B2] (IRQs *34)
ACPI: PCI Interrupt Link [I0B3] (IRQs *35)
ACPI: PCI Interrupt Link [I0C0] (IRQs *36)
ACPI: PCI Interrupt Link [I0C1] (IRQs *37)
ACPI: PCI Interrupt Link [I0C2] (IRQs *38)
ACPI: PCI Interrupt Link [I0C3] (IRQs *39)
ACPI: PCI Interrupt Link [I0D0] (IRQs *40)
ACPI: PCI Interrupt Link [I0D1] (IRQs *41)
ACPI: PCI Interrupt Link [I0D2] (IRQs *42)
ACPI: PCI Interrupt Link [I0D3] (IRQs *43)
ACPI: PCI Interrupt Link [BI02] (IRQs *52)
ACPI: PCI Interrupt Link [BI03] (IRQs *52)
ACPI: PCI Interrupt Link [BI04] (IRQs *52)
ACPI: PCI Interrupt Link [BI05] (IRQs *52)
ACPI: PCI Interrupt Link [BI06] (IRQs *54)
ACPI: PCI Interrupt Link [BI07] (IRQs *24)
ACPI: PCI Interrupt Link [BI08] (IRQs *24)
ACPI: PCI Interrupt Link [BI09] (IRQs *24)
ACPI: PCI Interrupt Link [BI0A] (IRQs *24)
ACPI: PCI Interrupt Link [BI0B] (IRQs *54)
ACPI: PCI Interrupt Link [BI0C] (IRQs *54)
ACPI: PCI Interrupt Link [BI0D] (IRQs *54)
ACPI: PCI Interrupt Link [PI20] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI21] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI22] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI23] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI30] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI31] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI32] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI33] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI40] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI41] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI42] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI43] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI50] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI51] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI52] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI53] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI60] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI61] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI62] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI63] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI70] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI71] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI72] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI73] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI90] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI91] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI92] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI93] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR4] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR5] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR6] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR7] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR8] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR9] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [USB1] (IRQs *22)
ACPI: PCI Interrupt Link [USB2] (IRQs *23)
ACPI: PCI Interrupt Link [USB3] (IRQs *23)
ACPI: PCI Interrupt Link [USB4] (IRQs *22)
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [U1PI] (IRQs) *0
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [U2PI] (IRQs) *0
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [U3PI] (IRQs) *0
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [U4PI] (IRQs) *0
ACPI: PCI Interrupt Link [SATA] (IRQs *16)
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [SATP] (IRQs) *0
ACPI: PCI Interrupt Link [I020] (IRQs *56)
ACPI: PCI Interrupt Link [I021] (IRQs *57)
ACPI: PCI Interrupt Link [I022] (IRQs *58)
ACPI: PCI Interrupt Link [I023] (IRQs *59)
ACPI: PCI Interrupt Link [I030] (IRQs *60)
ACPI: PCI Interrupt Link [I031] (IRQs *61)
ACPI: PCI Interrupt Link [I032] (IRQs *62)
ACPI: PCI Interrupt Link [I033] (IRQs *63)
ACPI: PCI Interrupt Link [I040] (IRQs *76)
ACPI: PCI Interrupt Link [I041] (IRQs *77)
ACPI: PCI Interrupt Link [I042] (IRQs *78)
ACPI: PCI Interrupt Link [I043] (IRQs *79)
ACPI: PCI Interrupt Link [I050] (IRQs *80)
ACPI: PCI Interrupt Link [I051] (IRQs *81)
ACPI: PCI Interrupt Link [I052] (IRQs *82)
ACPI: PCI Interrupt Link [I053] (IRQs *83)
ACPI: PCI Interrupt Link [I060] (IRQs *79)
ACPI: PCI Interrupt Link [I061] (IRQs *76)
ACPI: PCI Interrupt Link [I062] (IRQs *77)
ACPI: PCI Interrupt Link [I063] (IRQs *78)
ACPI: PCI Interrupt Link [I070] (IRQs *56)
ACPI: PCI Interrupt Link [I071] (IRQs *57)
ACPI: PCI Interrupt Link [I072] (IRQs *58)
ACPI: PCI Interrupt Link [I073] (IRQs *59)
ACPI: PCI Interrupt Link [I090] (IRQs *24)
ACPI: PCI Interrupt Link [I091] (IRQs *24)
ACPI: PCI Interrupt Link [I092] (IRQs *24)
ACPI: PCI Interrupt Link [I093] (IRQs *24)
ACPI: PCI Interrupt Link [I0A0] (IRQs *56)
ACPI: PCI Interrupt Link [I0A1] (IRQs *57)
ACPI: PCI Interrupt Link [I0A2] (IRQs *58)
ACPI: PCI Interrupt Link [I0A3] (IRQs *59)
ACPI: PCI Interrupt Link [I0B0] (IRQs *64)
ACPI: PCI Interrupt Link [I0B1] (IRQs *65)
ACPI: PCI Interrupt Link [I0B2] (IRQs *66)
ACPI: PCI Interrupt Link [I0B3] (IRQs *67)
ACPI: PCI Interrupt Link [I0C0] (IRQs *56)
ACPI: PCI Interrupt Link [I0C1] (IRQs *57)
ACPI: PCI Interrupt Link [I0C2] (IRQs *58)
ACPI: PCI Interrupt Link [I0C3] (IRQs *59)
ACPI: PCI Interrupt Link [I0D0] (IRQs *72)
ACPI: PCI Interrupt Link [I0D1] (IRQs *73)
ACPI: PCI Interrupt Link [I0D2] (IRQs *74)
ACPI: PCI Interrupt Link [I0D3] (IRQs *75)
ACPI: PCI Interrupt Link [BI02] (IRQs *84)
ACPI: PCI Interrupt Link [BI03] (IRQs *84)
ACPI: PCI Interrupt Link [BI04] (IRQs *84)
ACPI: PCI Interrupt Link [BI05] (IRQs *84)
ACPI: PCI Interrupt Link [BI06] (IRQs *86)
ACPI: PCI Interrupt Link [BI07] (IRQs *56)
ACPI: PCI Interrupt Link [BI08] (IRQs *56)
ACPI: PCI Interrupt Link [BI09] (IRQs *56)
ACPI: PCI Interrupt Link [BI0A] (IRQs *56)
ACPI: PCI Interrupt Link [BI0B] (IRQs *86)
ACPI: PCI Interrupt Link [BI0C] (IRQs *86)
ACPI: PCI Interrupt Link [BI0D] (IRQs *86)
ACPI: PCI Interrupt Link [PI20] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI21] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI22] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI23] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI30] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI31] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI32] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI33] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI40] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI41] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI42] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI43] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI50] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI51] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI52] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI53] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI60] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI61] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI62] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI63] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI70] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI71] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI72] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI73] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI90] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI91] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI92] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI93] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR4] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR5] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR6] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR7] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR8] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR9] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRD] (IRQs 10 11) *0, disabled.
vgaarb: device added: PCI:0000:02:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.1
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
lo: Dropping TSO features since no CSUM feature.
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0020-0x003f]
pnp 00:01: [io 0x00a0-0x00bf]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0070-0x0079]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x00f0]
pnp 00:01: [io 0x0379-0x037a]
pnp 00:01: [io 0x0400-0x043f]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x04d6]
pnp 00:01: [io 0x0520]
pnp 00:01: [io 0x0580-0x059f]
pnp 00:01: [io 0x0600-0x067f]
pnp 00:01: [io 0x0700-0x0703]
pnp 00:01: [io 0x0820-0x082f]
pnp 00:01: [io 0x0900-0x09fe]
pnp 00:01: [io 0x0c06-0x0c07]
pnp 00:01: [io 0x0c14]
pnp 00:01: [io 0x0c4a]
pnp 00:01: [io 0x0c50-0x0c52]
pnp 00:01: [io 0x0c6c]
pnp 00:01: [io 0x0c6f]
pnp 00:01: [io 0x0c80-0x0c83]
pnp 00:01: [io 0x0c90-0x0c9f]
pnp 00:01: [io 0x0ca0-0x0ca5]
pnp 00:01: [io 0x0cd0-0x0cdf]
pnp 00:01: [io 0x0f50-0x0f58]
pnp 00:01: [io 0x0b00-0x0b3f]
pnp 00:01: [io 0x02f8-0x02ff]
pnp 00:01: [mem 0xc0000000-0xcfffffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0ca2-0x0ca3]
pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [dma 7]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:08: [io 0x002e-0x002f]
pnp 00:08: [io 0x0620-0x065f]
pnp 00:08: [io 0x0680-0x069f]
pnp 00:08: [io 0x0600-0x061f]
pnp 00:08: [io 0x0660-0x067f]
pnp 00:08: [io 0x0300-0x031f]
pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:09: [irq 4]
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:0a: [io 0x0070-0x0071]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0b: [mem 0xfaff4000-0xfaff7fff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0d: [mem 0xfddf4000-0xfddf7fff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0379-0x037a] has been reserved
system 00:01: [io 0x0400-0x043f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0520] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x067f] has been reserved
system 00:01: [io 0x0700-0x0703] has been reserved
system 00:01: [io 0x0820-0x082f] has been reserved
system 00:01: [io 0x0900-0x09fe] has been reserved
system 00:01: [io 0x0c06-0x0c07] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c4a] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0c90-0x0c9f] has been reserved
system 00:01: [io 0x0ca0-0x0ca5] has been reserved
system 00:01: [io 0x0cd0-0x0cdf] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0b00-0x0b3f] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:0b: [mem 0xfaff4000-0xfaff7fff] has been reserved
system 00:0d: [mem 0xfddf4000-0xfddf7fff] has been reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.0: BAR 15: assigned [mem 0xfc000000-0xfc0fffff pref]
pci 0000:00:0b.0: BAR 15: assigned [mem 0xfc100000-0xfc1fffff pref]
pci 0000:00:0c.0: BAR 14: assigned [mem 0xfc200000-0xfc2fffff]
pci 0000:00:0d.0: BAR 15: can't assign mem pref (size 0x100000)
pci 0000:03:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0xfd700000-0xfd8fffff]
pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfc0fffff pref]
pci 0000:02:00.2: BAR 6: assigned [mem 0xfc500000-0xfc50ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0a.0: bridge window [mem 0xfc500000-0xfd6fffff]
pci 0000:00:0a.0: bridge window [mem 0xfb000000-0xfbffffff 64bit pref]
pci 0000:08:00.0: BAR 6: assigned [mem 0xfc100000-0xfc13ffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 08-0a]
pci 0000:00:0b.0: PCI bridge to [bus 08-0a]
pci 0000:00:0b.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:0b.0: bridge window [mem 0xfd900000-0xfdafffff]
pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xfc300000-0xfc31ffff pref]
pci 0000:04:00.1: BAR 6: assigned [mem 0xfc320000-0xfc33ffff pref]
pci 0000:04:00.2: BAR 6: assigned [mem 0xfc200000-0xfc21ffff pref]
pci 0000:04:00.3: BAR 6: assigned [mem 0xfc220000-0xfc23ffff pref]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io disabled]
pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
pci 0000:00:0c.0: bridge window [mem 0xfc300000-0xfc3fffff 64bit pref]
pci 0000:0b:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc3ffff pref]
pci 0000:00:0d.0: PCI bridge to [bus 0b-0d]
pci 0000:00:0d.0: PCI bridge to [bus 0b-0d]
pci 0000:00:0d.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:0d.0: bridge window [mem 0xfdb00000-0xfdcfffff]
pci 0000:00:0d.0: bridge window [mem pref disabled]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
pci 0000:00:14.4: bridge window [mem pref disabled]
pci 0000:40:02.0: BAR 14: can't assign mem (size 0x100000)
pci 0000:40:0b.0: BAR 14: can't assign mem (size 0x100000)
pci 0000:47:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
pci 0000:47:00.1: BAR 6: assigned [mem 0xfdf20000-0xfdf3ffff pref]
pci 0000:47:00.2: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:47:00.3: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:40:02.0: PCI bridge to [bus 47-49]
pci 0000:40:02.0: PCI bridge to [bus 47-49]
pci 0000:40:02.0: bridge window [io disabled]
pci 0000:40:02.0: bridge window [mem disabled]
pci 0000:40:02.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:41:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
pci 0000:41:00.1: BAR 6: assigned [mem 0xfde20000-0xfde3ffff pref]
pci 0000:41:00.2: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:41:00.3: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:40:0b.0: PCI bridge to [bus 41-43]
pci 0000:40:0b.0: PCI bridge to [bus 41-43]
pci 0000:40:0b.0: bridge window [io disabled]
pci 0000:40:0b.0: bridge window [mem disabled]
pci 0000:40:0b.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
ACPI: PCI Interrupt Link [BI02] enabled at IRQ 52
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
pci 0000:00:02.0: PCI INT A -> Link[BI02] -> GSI 52 (level, high) -> IRQ 52
pci 0000:00:02.0: setting latency timer to 64
ACPI: PCI Interrupt Link [BI0A] enabled at IRQ 24
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pci 0000:00:0a.0: PCI INT A -> Link[BI0A] -> GSI 24 (level, high) -> IRQ 24
pci 0000:00:0a.0: setting latency timer to 64
ACPI: PCI Interrupt Link [BI0B] enabled at IRQ 54
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
pci 0000:00:0b.0: PCI INT A -> Link[BI0B] -> GSI 54 (level, high) -> IRQ 54
pci 0000:00:0b.0: setting latency timer to 64
ACPI: PCI Interrupt Link [BI0C] enabled at IRQ 54
pci 0000:00:0c.0: PCI INT A -> Link[BI0C] -> GSI 54 (level, high) -> IRQ 54
pci 0000:00:0c.0: setting latency timer to 64
ACPI: PCI Interrupt Link [BI0D] enabled at IRQ 54
pci 0000:00:0d.0: PCI INT A -> Link[BI0D] -> GSI 54 (level, high) -> IRQ 54
pci 0000:00:0d.0: setting latency timer to 64
ACPI: PCI Interrupt Link [BI02] enabled at IRQ 84
alloc irq_desc for 84 on node -1
alloc kstat_irqs on node -1
pci 0000:40:02.0: PCI INT A -> Link[BI02] -> GSI 84 (level, high) -> IRQ 84
pci 0000:40:02.0: setting latency timer to 64
ACPI: PCI Interrupt Link [BI0B] enabled at IRQ 86
alloc irq_desc for 86 on node -1
alloc kstat_irqs on node -1
pci 0000:40:0b.0: PCI INT A -> Link[BI0B] -> GSI 86 (level, high) -> IRQ 86
pci 0000:40:0b.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0xfaf00000-0xfdcfffff]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed03fff]
pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 11 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 12 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 13 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd8fffff]
pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfc0fffff pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfd6fffff]
pci_bus 0000:02: resource 2 [mem 0xfb000000-0xfbffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:08: resource 1 [mem 0xfd900000-0xfdafffff]
pci_bus 0000:08: resource 2 [mem 0xfc100000-0xfc1fffff pref]
pci_bus 0000:04: resource 1 [mem 0xfc200000-0xfc2fffff]
pci_bus 0000:04: resource 2 [mem 0xfc300000-0xfc3fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:0b: resource 1 [mem 0xfdb00000-0xfdcfffff]
pci_bus 0000:01: resource 4 [mem 0xfaf00000-0xfdcfffff]
pci_bus 0000:01: resource 5 [io 0x1000-0xffff]
pci_bus 0000:01: resource 6 [io 0x0000-0x03af]
pci_bus 0000:01: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:01: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed03fff]
pci_bus 0000:01: resource 10 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 11 [io 0x03b0-0x03bb]
pci_bus 0000:01: resource 12 [io 0x03c0-0x03df]
pci_bus 0000:01: resource 13 [mem 0x000a0000-0x000bffff]
pci_bus 0000:40: resource 4 [mem 0xfdd00000-0xfdffffff]
pci_bus 0000:47: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:41: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [USB1] enabled at IRQ 22
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
pci 0000:00:12.0: PCI INT A -> Link[USB1] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.1: PCI INT A -> Link[USB1] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:12.1: PCI INT A disabled
ACPI: PCI Interrupt Link [USB2] enabled at IRQ 23
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:12.2: PCI INT B -> Link[USB2] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:12.2: PCI INT B disabled
ACPI: PCI Interrupt Link [USB3] enabled at IRQ 23
pci 0000:00:13.0: PCI INT A -> Link[USB3] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.1: PCI INT A -> Link[USB3] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:13.1: PCI INT A disabled
ACPI: PCI Interrupt Link [USB4] enabled at IRQ 22
pci 0000:00:13.2: PCI INT B -> Link[USB4] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:13.2: PCI INT B disabled
pci 0000:02:00.1: Boot video device
ACPI: PCI Interrupt Link [I061] enabled at IRQ 44
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
pci 0000:02:00.4: PCI INT B -> Link[I061] -> GSI 44 (level, high) -> IRQ 44
pci 0000:02:00.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16973k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1386588459.244:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 8A44323FB303E068
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
Refined TSC clocksource calibration: 2294.275 MHz.
Switching to clocksource tsc
ipmi_si 00:02: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
ipmi_si 00:02: IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> Link[USB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 23, io mem 0xfc4c0000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> Link[USB4] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 22, io mem 0xfc490000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> Link[USB1] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 22, io mem 0xfc4e0000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.el6.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> Link[USB1] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 22, io mem 0xfc4d0000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.el6.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> Link[USB3] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 23, io mem 0xfc4b0000
usb 1-2: new high speed USB device number 2 using ehci_hcd
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-431.el6.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> Link[USB3] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 23, io mem 0xfc4a0000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-431.el6.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:02:00.4: PCI INT B -> Link[I061] -> GSI 44 (level, high) -> IRQ 44
uhci_hcd 0000:02:00.4: setting latency timer to 64
uhci_hcd 0000:02:00.4: UHCI Host Controller
uhci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 7
uhci_hcd 0000:02:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:02:00.4: irq 44, io base 0x00003c00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:02:00.4
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:0a: setting system clock to 2013-12-09 11:27:53 UTC (1386588473)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1588k freed
dracut: dracut-004-335.el6
usb 1-2: New USB device found, idVendor=0424, idProduct=2660
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 2 ports detected
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
device-mapper: multipath: version 1.5.0 loaded
dracut: Starting plymouth daemon
usb 2-4: new high speed USB device number 2 using ehci_hcd
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 2-4: New USB device found, idVendor=0e8d, idProduct=1806
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: MT1806
usb 2-4: Manufacturer: MediaTek Inc
usb 2-4: SerialNumber: R8RZ6GAD200F0E
usb 2-4: configuration #1 chosen from 1 choice
ahci 0000:00:11.0: version 3.0
ACPI: PCI Interrupt Link [SATA] enabled at IRQ 16
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:11.0: PCI INT A -> Link[SATA] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfc4f0000 port 0xfc4f0100 irq 16
usb 4-2: new full speed USB device number 2 using ohci_hcd
usb 4-2: New USB device found, idVendor=0b39, idProduct=1001
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Combo Free KVM 8/16 V2.00
usb 4-2: Manufacturer: OCT
usb 4-2: configuration #1 chosen from 1 choice
input: OCT Combo Free KVM 8/16 V2.00 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input2
generic-usb 0003:0B39:1001.0001: input,hidraw0: USB HID v1.11 Keyboard [OCT Combo Free KVM 8/16 V2.00] on usb-0000:00:12.1-2/input0
input: OCT Combo Free KVM 8/16 V2.00 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input3
generic-usb 0003:0B39:1001.0002: input,hidraw1: USB HID v1.11 Mouse [OCT Combo Free KVM 8/16 V2.00] on usb-0000:00:12.1-2/input1
ata1: SATA link down (SStatus 0 SControl 300)
pata_atiixp 0000:00:14.1: can't derive routing for PCI INT A
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi1 : pata_atiixp
scsi2 : pata_atiixp
ata2: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata3: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
usb 7-1: new full speed USB device number 2 using uhci_hcd
usb 7-1: New USB device found, idVendor=03f0, idProduct=7029
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Virtual Keyboard
usb 7-1: Manufacturer: HP
usb 7-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:0a.0/0000:02:00.4/usb7/7-1/7-1:1.0/input/input4
generic-usb 0003:03F0:7029.0003: input,hidraw2: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:0a.0/0000:02:00.4/usb7/7-1/7-1:1.1/input/input5
generic-usb 0003:03F0:7029.0004: input,hidraw3: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input1
usb 1-2.1: new high speed USB device number 4 using ehci_hcd
usb 1-2.1: New USB device found, idVendor=0424, idProduct=4030
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.1: Product: Ultra Fast Media Reader
usb 1-2.1: Manufacturer: Generic
usb 1-2.1: SerialNumber: 000002660A01
usb 1-2.1: configuration #1 chosen from 1 choice
HP HPSA Driver (v 3.4.0-1-RH1)
ACPI: PCI Interrupt Link [I020] enabled at IRQ 24
hpsa 0000:03:00.0: PCI INT A -> Link[I020] -> GSI 24 (level, high) -> IRQ 24
hpsa 0000:03:00.0: setting latency timer to 64
hpsa 0000:03:00.0: MSIX
alloc irq_desc for 88 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 88 for MSI/MSI-X
alloc irq_desc for 89 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 89 for MSI/MSI-X
alloc irq_desc for 90 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 90 for MSI/MSI-X
alloc irq_desc for 91 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 91 for MSI/MSI-X
alloc irq_desc for 92 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 92 for MSI/MSI-X
alloc irq_desc for 93 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 93 for MSI/MSI-X
alloc irq_desc for 94 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 94 for MSI/MSI-X
alloc irq_desc for 95 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 95 for MSI/MSI-X
hpsa 0000:03:00.0: hpsa0: at IRQ 88 using DAC
scsi3 : hpsa
hpsa 0000:03:00.0: RAID device c3b3t0l0 added.
scsi 3:3:0:0: RAID HP P420i 4.68 PQ: 0 ANSI: 5
qla2xxx [0000:00:00.0]-0005: QLogic Fibre Channel HBA Driver: 8.05.00.03.06.5-k2.
ACPI: PCI Interrupt Link [I0B0] enabled at IRQ 32
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
qla2xxx 0000:08:00.0: PCI INT A -> Link[I0B0] -> GSI 32 (level, high) -> IRQ 32
qla2xxx [0000:08:00.0]-001d: Found an ISP2532 irq 32 iobase 0xffffc9000c0dc000.
alloc irq_desc for 96 on node -1
alloc kstat_irqs on node -1
qla2xxx 0000:08:00.0: irq 96 for MSI/MSI-X
alloc irq_desc for 97 on node -1
alloc kstat_irqs on node -1
qla2xxx 0000:08:00.0: irq 97 for MSI/MSI-X
qla2xxx 0000:08:00.0: setting latency timer to 64
qla2xxx 0000:08:00.0: firmware: requesting ql2500_fw.bin
scsi4 : qla2xxx
qla2xxx [0000:08:00.0]-00fb:4: QLogic HPAK344A - HP 8Gb Single Channel PCI-e 2.0 FC HBA.
qla2xxx [0000:08:00.0]-00fc:4: ISP2532: PCIe (5.0GT/s x8) @ 0000:08:00.0 hdma+ host#=4 fw=7.00.01 (90d5).
ACPI: PCI Interrupt Link [I0D0] enabled at IRQ 40
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
qla2xxx 0000:0b:00.0: PCI INT A -> Link[I0D0] -> GSI 40 (level, high) -> IRQ 40
qla2xxx [0000:0b:00.0]-001d: Found an ISP2532 irq 40 iobase 0xffffc9000c0d6000.
alloc irq_desc for 98 on node -1
alloc kstat_irqs on node -1
qla2xxx 0000:0b:00.0: irq 98 for MSI/MSI-X
alloc irq_desc for 99 on node -1
alloc kstat_irqs on node -1
qla2xxx 0000:0b:00.0: irq 99 for MSI/MSI-X
qla2xxx 0000:0b:00.0: setting latency timer to 64
qla2xxx [0000:08:00.0]-505f:4: Link is operational (8 Gbps).
scsi 4:0:0:0: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:0:1: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:0:2: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:0:4: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:0:5: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:0:6: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:1:0: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:1:1: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:1:2: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:1:4: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:1:5: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 4:0:1:6: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi5 : qla2xxx
qla2xxx [0000:0b:00.0]-00fb:5: QLogic HPAK344A - HP 8Gb Single Channel PCI-e 2.0 FC HBA.
qla2xxx [0000:0b:00.0]-00fc:5: ISP2532: PCIe (5.0GT/s x8) @ 0000:0b:00.0 hdma+ host#=5 fw=7.00.01 (90d5).
qla2xxx [0000:0b:00.0]-505f:5: Link is operational (8 Gbps).
scsi 5:0:0:0: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:0:1: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:0:2: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:0:4: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:0:5: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:0:6: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:1:0: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:1:1: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:1:2: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:1:4: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:1:5: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
scsi 5:0:1:6: Direct-Access HP P2000 G3 FC T250 PQ: 0 ANSI: 5
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sd 4:0:0:0: [sda] 644531200 512-byte logical blocks: (329 GB/307 GiB)
sd 4:0:0:4: [sdd] 234374912 512-byte logical blocks: (119 GB/111 GiB)
sd 4:0:0:1: [sdb] 429687424 512-byte logical blocks: (219 GB/204 GiB)
sd 4:0:0:5: [sde] 644531200 512-byte logical blocks: (329 GB/307 GiB)
sd 4:0:0:2: [sdc] 859374976 512-byte logical blocks: (439 GB/409 GiB)
sd 4:0:0:6: [sdf] 142578048 512-byte logical blocks: (72.9 GB/67.9 GiB)
sd 4:0:1:0: [sdg] 644531200 512-byte logical blocks: (329 GB/307 GiB)
sd 4:0:1:1: [sdh] 429687424 512-byte logical blocks: (219 GB/204 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: d7 00 00 08
sd 4:0:0:1: [sdb] Write Protect is off
sd 4:0:0:1: [sdb] Mode Sense: d7 00 00 08
sd 4:0:1:2: [sdi] 859374976 512-byte logical blocks: (439 GB/409 GiB)
sd 4:0:1:4: [sdj] 234374912 512-byte logical blocks: (119 GB/111 GiB)
sd 4:0:1:5: [sdk] 644531200 512-byte logical blocks: (329 GB/307 GiB)
sd 4:0:0:5: [sde] Write Protect is off
sd 4:0:0:5: [sde] Mode Sense: d7 00 00 08
sd 4:0:0:4: [sdd] Write Protect is off
sd 4:0:0:4: [sdd] Mode Sense: d7 00 00 08
sd 4:0:1:6: [sdl] 142578048 512-byte logical blocks: (72.9 GB/67.9 GiB)
sd 5:0:0:0: [sdm] 644531200 512-byte logical blocks: (329 GB/307 GiB)
sd 5:0:0:2: [sdo] 859374976 512-byte logical blocks: (439 GB/409 GiB)
sd 5:0:0:4: [sdp] 234374912 512-byte logical blocks: (119 GB/111 GiB)
sd 5:0:0:5: [sdq] 644531200 512-byte logical blocks: (329 GB/307 GiB)
sd 5:0:0:1: [sdn] 429687424 512-byte logical blocks: (219 GB/204 GiB)
sd 4:0:0:6: [sdf] Write Protect is off
sd 4:0:0:6: [sdf] Mode Sense: d7 00 00 08
sd 4:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:1:1: [sdt] 429687424 512-byte logical blocks: (219 GB/204 GiB)
sd 5:0:1:0: [sds] 644531200 512-byte logical blocks: (329 GB/307 GiB)
sd 5:0:1:2: [sdu] 859374976 512-byte logical blocks: (439 GB/409 GiB)
sd 5:0:1:4: [sdv] 234374912 512-byte logical blocks: (119 GB/111 GiB)
sd 4:0:0:5: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:1:5: [sdw] 644531200 512-byte logical blocks: (329 GB/307 GiB)
sd 5:0:0:6: [sdr] 142578048 512-byte logical blocks: (72.9 GB/67.9 GiB)
sd 5:0:1:6: [sdx] 142578048 512-byte logical blocks: (72.9 GB/67.9 GiB)
sd 4:0:0:2: [sdc] Write Protect is off
sd 4:0:0:2: [sdc] Mode Sense: d7 00 00 08
sd 4:0:0:4: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:6: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:1:1: [sdh] Write Protect is off
sd 4:0:1:1: [sdh] Mode Sense: d7 00 00 08
sd 5:0:1:1: [sdt] Write Protect is off
sd 5:0:1:1: [sdt] Mode Sense: d7 00 00 08
sd 4:0:1:0: [sdg] Write Protect is off
sd 4:0:1:0: [sdg] Mode Sense: d7 00 00 08
sd 4:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:1:0: [sds] Write Protect is off
sd 5:0:1:0: [sds] Mode Sense: d7 00 00 08
sd 5:0:1:4: [sdv] Write Protect is off
sd 5:0:1:4: [sdv] Mode Sense: d7 00 00 08
sd 5:0:1:2: [sdu] Write Protect is off
sd 5:0:1:2: [sdu] Mode Sense: d7 00 00 08
sd 5:0:1:5: [sdw] Write Protect is off
sd 5:0:1:5: [sdw] Mode Sense: d7 00 00 08
sd 5:0:0:0: [sdm] Write Protect is off
sd 5:0:0:0: [sdm] Mode Sense: d7 00 00 08
sd 5:0:0:4: [sdp] Write Protect is off
sd 5:0:0:4: [sdp] Mode Sense: d7 00 00 08
sd 5:0:0:5: [sdq] Write Protect is off
sd 5:0:0:5: [sdq] Mode Sense: d7 00 00 08
sd 4:0:1:2: [sdi] Write Protect is off
sd 4:0:1:2: [sdi] Mode Sense: d7 00 00 08
sd 4:0:1:6: [sdl] Write Protect is off
sd 4:0:1:6: [sdl] Mode Sense: d7 00 00 08
sd 4:0:1:4: [sdj] Write Protect is off
sd 4:0:1:4: [sdj] Mode Sense: d7 00 00 08
sd 5:0:1:6: [sdx] Write Protect is off
sd 5:0:1:6: [sdx] Mode Sense: d7 00 00 08
sd 5:0:1:1: [sdt] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:1:5: [sdk] Write Protect is off
sd 4:0:1:5: [sdk] Mode Sense: d7 00 00 08
sd 5:0:0:1: [sdn] Write Protect is off
sd 5:0:0:1: [sdn] Mode Sense: d7 00 00 08
sd 5:0:1:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:1:4: [sdv] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:2: [sdo] Write Protect is off
sd 5:0:0:2: [sdo] Mode Sense: d7 00 00 08
sd 5:0:1:2: [sdu] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:1:1: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:1:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:4: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:1:5: [sdw] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:1:6: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:6: [sdr] Write Protect is off
sd 5:0:0:6: [sdr] Mode Sense: d7 00 00 08
sd 4:0:1:4: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:1:5: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:1:6: [sdx] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:1:2: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:6: [sdr] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:2: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:5: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb:
sdd:
sdt:
sd 5:0:0:1: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sds:
sde:
sdc:
sdf:
sdn:
sdu:
sdv:
sdw:
sdx:
sdm: sdf1 sdf2
sdq:
sdh:
sdi:
sdl: sdx1 sdx2
sdk: sdl1 sdl2
sdo:
sdr:
sdg:
sd 4:0:0:6: [sdf] Attached SCSI disk
sdj: sdr1 sdr2
sd 5:0:1:6: [sdx] Attached SCSI disk
sdp:
sd 4:0:1:6: [sdl] Attached SCSI disk
sd 5:0:0:6: [sdr] Attached SCSI disk
sdj1
sdv1
sdd1
sdp1
sd 4:0:1:4: [sdj] Attached SCSI disk
sd 4:0:0:4: [sdd] Attached SCSI disk
sd 5:0:1:4: [sdv] Attached SCSI disk
sd 5:0:0:4: [sdp] Attached SCSI disk
sds1
sda1
sdg1
sdm1
sd 5:0:1:0: [sds] Attached SCSI disk
sd 4:0:0:0: [sda] Attached SCSI disk
sd 5:0:0:0: [sdm] Attached SCSI disk
sd 4:0:1:0: [sdg] Attached SCSI disk
sdh1
sdb1
sdt1
sdn1
sd 4:0:1:1: [sdh] Attached SCSI disk
sd 4:0:0:1: [sdb] Attached SCSI disk
sd 5:0:1:1: [sdt] Attached SCSI disk
sd 5:0:0:1: [sdn] Attached SCSI disk
sdi1
sdc1
sdo1
sd 4:0:1:2: [sdi] Attached SCSI disk
sdu1
sd 4:0:0:2: [sdc] Attached SCSI disk
sd 5:0:0:2: [sdo] Attached SCSI disk
sd 5:0:1:2: [sdu] Attached SCSI disk
sde1
sdq1
sdw1
sdk1
sd 5:0:0:5: [sdq] Attached SCSI disk
sd 4:0:0:5: [sde] Attached SCSI disk
sd 5:0:1:5: [sdw] Attached SCSI disk
sd 4:0:1:5: [sdk] Attached SCSI disk
device-mapper: multipath round-robin: version 1.0.0 loaded
dracut: Scanning devices dm-2 for LVM logical volumes vgsys/lvolswap vgsys/lvolroot
dracut: inactive '/dev/vgsys/lvolhome' [3.00 GiB] inherit
dracut: inactive '/dev/vgsys/lvolusr' [5.00 GiB] inherit
dracut: inactive '/dev/vgsys/lvolvar' [40.00 GiB] inherit
dracut: inactive '/dev/vgsys/lvolswap' [8.00 GiB] inherit
dracut: inactive '/dev/vgsys/lvoltmp' [5.00 GiB] inherit
dracut: inactive '/dev/vgsys/lvolroot' [4.00 GiB] inherit
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access HP iLO Internal SD-CARD 2.09 PQ: 0 ANSI: 0
usb-storage: device scan complete
sd 7:0:0:0: [sdy] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB)
sd 7:0:0:0: [sdy] Write Protect is off
sd 7:0:0:0: [sdy] Mode Sense: 23 00 00 00
sd 7:0:0:0: [sdy] Assuming drive cache: write through
scsi 6:0:0:0: CD-ROM ASUS SDRW-08D2S-U F301 PQ: 0 ANSI: 0
sd 7:0:0:0: [sdy] Assuming drive cache: write through
sdy: sdy1 sdy5 sdy6 sdy7 sdy8
sd 7:0:0:0: [sdy] Assuming drive cache: write through
sd 7:0:0:0: [sdy] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vgsys-lvolroot
dracut: Loading SELinux policy
type=1404 audit(1386588480.601:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 277800 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-4, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1386588481.193:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hpilo 0000:02:00.2: PCI INT B -> Link[I061] -> GSI 44 (level, high) -> IRQ 44
hpilo 0000:02:00.2: setting latency timer to 64
ACPI: PCI Interrupt Link [I060] enabled at IRQ 47
alloc irq_desc for 47 on node -1
alloc kstat_irqs on node -1
hpwdt 0000:02:00.0: PCI INT A -> Link[I060] -> GSI 47 (level, high) -> IRQ 47
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:02:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF), priority: LAST (default = 0/LAST).
hpwdt 0000:02:00.0: HP Watchdog Timer Driver: 1.3.2-rh, timer margin: 30 seconds (nowayout=0).
power_meter ACPI000D:00: Found ACPI power meter.
scsi 3:3:0:0: Attached scsi generic sg0 type 12
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:1: Attached scsi generic sg2 type 0
sd 4:0:0:2: Attached scsi generic sg3 type 0
sd 4:0:0:4: Attached scsi generic sg4 type 0
sd 4:0:0:5: Attached scsi generic sg5 type 0
sd 4:0:0:6: Attached scsi generic sg6 type 0
sd 4:0:1:0: Attached scsi generic sg7 type 0
sd 4:0:1:1: Attached scsi generic sg8 type 0
sd 4:0:1:2: Attached scsi generic sg9 type 0
sd 4:0:1:4: Attached scsi generic sg10 type 0
sd 4:0:1:5: Attached scsi generic sg11 type 0
sd 4:0:1:6: Attached scsi generic sg12 type 0
sd 5:0:0:0: Attached scsi generic sg13 type 0
sd 5:0:0:1: Attached scsi generic sg14 type 0
sd 5:0:0:2: Attached scsi generic sg15 type 0
sd 5:0:0:4: Attached scsi generic sg16 type 0
sd 5:0:0:5: Attached scsi generic sg17 type 0
sd 5:0:0:6: Attached scsi generic sg18 type 0
sd 5:0:1:0: Attached scsi generic sg19 type 0
sd 5:0:1:1: Attached scsi generic sg20 type 0
sd 5:0:1:2: Attached scsi generic sg21 type 0
sd 5:0:1:4: Attached scsi generic sg22 type 0
sd 5:0:1:5: Attached scsi generic sg23 type 0
sd 5:0:1:6: Attached scsi generic sg24 type 0
sd 7:0:0:0: Attached scsi generic sg25 type 0
sr 6:0:0:0: Attached scsi generic sg26 type 5
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.132 (May 21, 2013)
ACPI: PCI Interrupt Link [I0C0] enabled at IRQ 36
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: PCI INT A -> Link[I0C0] -> GSI 36 (level, high) -> IRQ 36
tg3 0000:04:00.0: setting latency timer to 64
tg3 0000:04:00.0: eth0: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1a:cb:14
tg3 0000:04:00.0: eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
ACPI: PCI Interrupt Link [I0C1] enabled at IRQ 37
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.1: PCI INT B -> Link[I0C1] -> GSI 37 (level, high) -> IRQ 37
tg3 0000:04:00.1: setting latency timer to 64
tg3 0000:04:00.1: eth1: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1a:cb:15
tg3 0000:04:00.1: eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:04:00.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:04:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:04:00.2: PCI INT A -> Link[I0C0] -> GSI 36 (level, high) -> IRQ 36
tg3 0000:04:00.2: setting latency timer to 64
tg3 0000:04:00.2: eth2: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1a:cb:16
tg3 0000:04:00.2: eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:04:00.2: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:04:00.2: eth2: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:04:00.3: PCI INT B -> Link[I0C1] -> GSI 37 (level, high) -> IRQ 37
tg3 0000:04:00.3: setting latency timer to 64
tg3 0000:04:00.3: eth3: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1a:cb:17
tg3 0000:04:00.3: eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:04:00.3: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:04:00.3: eth3: dma_rwctrl[00000001] dma_mask[64-bit]
ACPI: PCI Interrupt Link [I020] enabled at IRQ 56
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
tg3 0000:47:00.0: PCI INT A -> Link[I020] -> GSI 56 (level, high) -> IRQ 56
tg3 0000:47:00.0: setting latency timer to 64
tg3 0000:47:00.0: eth4: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1d:99:74
tg3 0000:47:00.0: eth4: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:47:00.0: eth4: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:47:00.0: eth4: dma_rwctrl[00000001] dma_mask[64-bit]
ACPI: PCI Interrupt Link [I021] enabled at IRQ 57
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
tg3 0000:47:00.1: PCI INT B -> Link[I021] -> GSI 57 (level, high) -> IRQ 57
tg3 0000:47:00.1: setting latency timer to 64
tg3 0000:47:00.1: eth5: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1d:99:75
tg3 0000:47:00.1: eth5: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:47:00.1: eth5: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:47:00.1: eth5: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:47:00.2: PCI INT A -> Link[I020] -> GSI 56 (level, high) -> IRQ 56
tg3 0000:47:00.2: setting latency timer to 64
tg3 0000:47:00.2: eth6: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1d:99:76
tg3 0000:47:00.2: eth6: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:47:00.2: eth6: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:47:00.2: eth6: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:47:00.3: PCI INT B -> Link[I021] -> GSI 57 (level, high) -> IRQ 57
tg3 0000:47:00.3: setting latency timer to 64
tg3 0000:47:00.3: eth7: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1d:99:77
tg3 0000:47:00.3: eth7: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:47:00.3: eth7: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:47:00.3: eth7: dma_rwctrl[00000001] dma_mask[64-bit]
ACPI: PCI Interrupt Link [I0B0] enabled at IRQ 64
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
tg3 0000:41:00.0: PCI INT A -> Link[I0B0] -> GSI 64 (level, high) -> IRQ 64
tg3 0000:41:00.0: setting latency timer to 64
tg3 0000:41:00.0: eth8: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1d:9e:34
tg3 0000:41:00.0: eth8: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:41:00.0: eth8: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:41:00.0: eth8: dma_rwctrl[00000001] dma_mask[64-bit]
ACPI: PCI Interrupt Link [I0B1] enabled at IRQ 65
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
tg3 0000:41:00.1: PCI INT B -> Link[I0B1] -> GSI 65 (level, high) -> IRQ 65
tg3 0000:41:00.1: setting latency timer to 64
tg3 0000:41:00.1: eth9: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1d:9e:35
tg3 0000:41:00.1: eth9: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:41:00.1: eth9: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:41:00.1: eth9: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:41:00.2: PCI INT A -> Link[I0B0] -> GSI 64 (level, high) -> IRQ 64
tg3 0000:41:00.2: setting latency timer to 64
tg3 0000:41:00.2: eth10: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1d:9e:36
tg3 0000:41:00.2: eth10: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:41:00.2: eth10: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:41:00.2: eth10: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:41:00.3: PCI INT B -> Link[I0B1] -> GSI 65 (level, high) -> IRQ 65
tg3 0000:41:00.3: setting latency timer to 64
tg3 0000:41:00.3: eth11: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address d8:9d:67:1d:9e:37
tg3 0000:41:00.3: eth11: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:41:00.3: eth11: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:41:00.3: eth11: dma_rwctrl[00000001] dma_mask[64-bit]
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0 Nov 22 2013
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS0: Registered DDR3 RAM
EDAC amd64: CS1: Registered DDR3 RAM
EDAC amd64: CS4: Registered DDR3 RAM
EDAC amd64: CS5: Registered DDR3 RAM
EDAC MC0: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:18.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 1).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS4: Registered DDR3 RAM
EDAC amd64: CS5: Registered DDR3 RAM
EDAC MC1: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:19.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 2).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS0: Registered DDR3 RAM
EDAC amd64: CS1: Registered DDR3 RAM
EDAC amd64: CS4: Registered DDR3 RAM
EDAC amd64: CS5: Registered DDR3 RAM
EDAC MC2: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1a.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 3).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS4: Registered DDR3 RAM
EDAC amd64: CS5: Registered DDR3 RAM
EDAC MC3: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1b.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
platform microcode: firmware: requesting amd-ucode/microcode_amd_fam15h.bin
microcode: CPU0: patch_level=0x6000822
microcode: CPU1: patch_level=0x6000822
microcode: CPU2: patch_level=0x6000822
microcode: CPU3: patch_level=0x6000822
microcode: CPU4: patch_level=0x6000822
microcode: CPU5: patch_level=0x6000822
microcode: CPU6: patch_level=0x6000822
microcode: CPU7: patch_level=0x6000822
microcode: CPU8: patch_level=0x6000822
microcode: CPU9: patch_level=0x6000822
microcode: CPU10: patch_level=0x6000822
microcode: CPU11: patch_level=0x6000822
microcode: CPU12: patch_level=0x6000822
microcode: CPU13: patch_level=0x6000822
microcode: CPU14: patch_level=0x6000822
microcode: CPU15: patch_level=0x6000822
microcode: CPU16: patch_level=0x6000822
microcode: CPU17: patch_level=0x6000822
microcode: CPU18: patch_level=0x6000822
microcode: CPU19: patch_level=0x6000822
microcode: CPU20: patch_level=0x6000822
microcode: CPU21: patch_level=0x6000822
microcode: CPU22: patch_level=0x6000822
microcode: CPU23: patch_level=0x6000822
microcode: CPU24: patch_level=0x6000822
microcode: CPU25: patch_level=0x6000822
microcode: CPU26: patch_level=0x6000822
microcode: CPU27: patch_level=0x6000822
microcode: CPU28: patch_level=0x6000822
microcode: CPU29: patch_level=0x6000822
microcode: CPU30: patch_level=0x6000822
microcode: CPU31: patch_level=0x6000822
Microcode Update Driver: v2.00 , Peter Oruba
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-1, type ext4), uses xattr
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-5, type ext4), uses xattr
EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-8, type ext4), uses xattr
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-6, type ext4), uses xattr
EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-7, type ext4), uses xattr
Adding 8388600k swap on /dev/mapper/vgsys-lvolswap. Priority:-1 extents:1 across:8388600k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1400 MHz, 2300 MHz
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
CE: hpet increasing min_delta_ns to 40226 nsec
usb 7-1: USB disconnect, device number 2
usb 7-1: new full speed USB device number 3 using uhci_hcd
usb 7-1: New USB device found, idVendor=03f0, idProduct=7029
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Virtual Keyboard
usb 7-1: Manufacturer: HP
usb 7-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:0a.0/0000:02:00.4/usb7/7-1/7-1:1.0/input/input6
generic-usb 0003:03F0:7029.0005: input,hidraw2: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:0a.0/0000:02:00.4/usb7/7-1/7-1:1.1/input/input7
generic-usb 0003:03F0:7029.0006: input,hidraw3: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input1
alloc irq_desc for 100 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 100 for MSI/MSI-X
alloc irq_desc for 101 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 101 for MSI/MSI-X
alloc irq_desc for 102 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 102 for MSI/MSI-X
alloc irq_desc for 103 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 103 for MSI/MSI-X
alloc irq_desc for 104 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 104 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
tg3 0000:04:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:04:00.0: PME# enabled
tg3 0000:04:00.0: irq 100 for MSI/MSI-X
tg3 0000:04:00.0: irq 101 for MSI/MSI-X
tg3 0000:04:00.0: irq 102 for MSI/MSI-X
tg3 0000:04:00.0: irq 103 for MSI/MSI-X
tg3 0000:04:00.0: irq 104 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
tg3 0000:04:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:04:00.0: irq 100 for MSI/MSI-X
tg3 0000:04:00.0: irq 101 for MSI/MSI-X
tg3 0000:04:00.0: irq 102 for MSI/MSI-X
tg3 0000:04:00.0: irq 103 for MSI/MSI-X
tg3 0000:04:00.0: irq 104 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
tg3 0000:04:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
tg3 0000:04:00.0: irq 100 for MSI/MSI-X
tg3 0000:04:00.0: irq 101 for MSI/MSI-X
tg3 0000:04:00.0: irq 102 for MSI/MSI-X
tg3 0000:04:00.0: irq 103 for MSI/MSI-X
tg3 0000:04:00.0: irq 104 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
tg3 0000:04:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
tg3 0000:04:00.0: irq 100 for MSI/MSI-X
tg3 0000:04:00.0: irq 101 for MSI/MSI-X
tg3 0000:04:00.0: irq 102 for MSI/MSI-X
tg3 0000:04:00.0: irq 103 for MSI/MSI-X
tg3 0000:04:00.0: irq 104 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
tg3 0000:04:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
tg3 0000:04:00.1: irq 100 for MSI/MSI-X
tg3 0000:04:00.1: irq 101 for MSI/MSI-X
tg3 0000:04:00.1: irq 102 for MSI/MSI-X
tg3 0000:04:00.1: irq 103 for MSI/MSI-X
tg3 0000:04:00.1: irq 104 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:04:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:04:00.1: eth1: Flow control is on for TX and on for RX
tg3 0000:04:00.1: eth1: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
tg3 0000:04:00.1: PME# enabled
tg3 0000:04:00.1: irq 100 for MSI/MSI-X
tg3 0000:04:00.1: irq 101 for MSI/MSI-X
tg3 0000:04:00.1: irq 102 for MSI/MSI-X
tg3 0000:04:00.1: irq 103 for MSI/MSI-X
tg3 0000:04:00.1: irq 104 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:04:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:04:00.1: eth1: Flow control is on for TX and on for RX
tg3 0000:04:00.1: eth1: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
tg3 0000:04:00.0: irq 100 for MSI/MSI-X
tg3 0000:04:00.0: irq 101 for MSI/MSI-X
tg3 0000:04:00.0: irq 102 for MSI/MSI-X
tg3 0000:04:00.0: irq 103 for MSI/MSI-X
tg3 0000:04:00.0: irq 104 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
tg3 0000:04:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
Bridge firewalling registered
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
usb 7-1: USB disconnect, device number 3
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx 0000:0b:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.