dmesg - Cubieboard
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.43+ (root@ubtu) (gcc version 4.8.2 20130603 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.06 - Linaro GCC 2013.06) ) #11 SMP PREEMPT Thu Sep 5 00:04:37 CST 2013
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun7i
Memory cut off:
MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
Ignoring unrecognised tag 0x00000000
Memory Reserved:
SYS : 0x43000000 - 0x4300ffff ( 64 kB)
VE : 0x44000000 - 0x48ffffff ( 80 MB)
LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
Memory policy: ECC disabled, Data cache writealloc
sunxi: Allwinner A20 (AW1651/sun7i) detected.
On node 0 totalpages: 245760
free_area_init_node: node 0, pgdat c08ce080, node_mem_map d0000000
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65024 pages, LIFO batch:15
Normal zone: 1008 pages used for memmap
Normal zone: 111632 pages, LIFO batch:31
HighMem zone: 528 pages used for memmap
HighMem zone: 67056 pages, LIFO batch:15
PERCPU: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768
pcpu-alloc: s7616 r8192 d12864 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
Kernel command line: console=tty0 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x800p60 root=/dev/mmcblk0p1 rootwait panic=10
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 448MB 512MB = 960MB total
Memory: 846768k/846768k available, 136272k reserved, 270336K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0824764 (8306 kB)
.init : 0xc0825000 - 0xc085ddc0 ( 228 kB)
.data : 0xc085e000 - 0xc08d5d88 ( 480 kB)
.bss : 0xc08d5dac - 0xc0aa4d78 (1852 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:160
Architected local timer running at 24.00MHz.
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
start_kernel(): bug: interrupts were enabled early
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 1908.73 BogoMIPS (lpj=9543680)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
Setting up static identity map for 0x405b27d8 - 0x405b2830
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (3824.02 BogoMIPS).
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
[ccu-inf] aw clock manager init
[ccu-inf] aw_ccu_init
[ccu-inf] script config pll3 to 297MHz
[ccu-inf] script config pll4 to 300MHz
[ccu-inf] script config pll6 to 600MHz
[ccu-inf] script config pll7 to 297MHz
[ccu-inf] script config pll8 to 336MHz
Init eGon pin module V2.0
bio: create slab at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource arch_sys_counter
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: initializing netlink socket (disabled)
type=2000 audit(0.470:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.18)
msgmni has been set to 1125
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi disp driver loaded (/dev/disp api 1.0)
[uart]: used uart info.: 0x01
[uart]: serial probe 0 irq 33 mapbase 0x01c28000
sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
nand_init,line:1282
[NAND]nand driver, init.
[NAND] nand driver(b) version: 0x2, 0x12, data: 20130526
[NAND] nand clk request start
[NAND] nand clk request ok!
[NAND DMA] request dma success
[NAND DMA] set fulldone_cb success
NFC Randomizer start.
[SCAN_DBG] Nand flash chip id is:0xec 0xd7 0x94 0x7a 0x54 0x43
[SCAN_DBG] ==============Nand Architecture Parameter==============
[SCAN_DBG] Nand Chip ID: 0x7a94d7ec 0xffffffff
[SCAN_DBG] Nand Chip Count: 0x1
[SCAN_DBG] Nand Chip Connect: 0x1
[SCAN_DBG] Nand Rb Connect Mode: 0x1
[SCAN_DBG] Sector Count Of Page: 0x10
[SCAN_DBG] Page Count Of Block: 0x80
[SCAN_DBG] Block Count Of Die: 0x1000
[SCAN_DBG] Plane Count Of Die: 0x2
[SCAN_DBG] Die Count Of Chip: 0x1
[SCAN_DBG] Bank Count Of Chip: 0x1
[SCAN_DBG] Optional Operation: 0x88
[SCAN_DBG] Access Frequence: 0x1e
[SCAN_DBG] ECC Mode: 0x3
[SCAN_DBG] Read Retry Type: 0x0
[SCAN_DBG] DDR Type: 0x0
[SCAN_DBG] =======================================================
[SCAN_DBG] ==============Optional Operaion Parameter==============
[SCAN_DBG] MultiPlaneReadCmd: 0x60, 0x60
[SCAN_DBG] MultiPlaneWriteCmd: 0x11, 0x81
[SCAN_DBG] MultiPlaneCopyReadCmd: 0x60, 0x60, 0x35
[SCAN_DBG] MultiPlaneCopyWriteCmd: 0x85, 0x11, 0x81
[SCAN_DBG] MultiPlaneStatusCmd: 0x70
[SCAN_DBG] InterBnk0StatusCmd: 0xf1
[SCAN_DBG] InterBnk1StatusCmd: 0xf2
[SCAN_DBG] BadBlockFlagPosition: 0x2
[SCAN_DBG] MultiPlaneBlockOffset: 0x1
[SCAN_DBG] =======================================================
[NAND] nand driver version: 0x2 0x11
nand interrupt register ok
[NAND] use nand_good_block_ratio from default parameter
[NAND DMA] start dma*****************************************
storage_type=0
boot from nand
nand: unknown partition table
nanda:
nandb: unknown partition table
nandc: unknown partition table
nandd: unknown partition table
nande: unknown partition table
nandf: unknown partition table
nandg: unknown partition table
nandh: unknown partition table
nandi:
nandj: unknown partition table
nandk:
[NAND]nand driver, ok.
sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
scsi0 : sw_ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
sunxi_emac Using mii phy on PortA
sunxi_emac Using MAC from SID: 02:81:0a:82:f7:b6
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
sw-ehci sw-ehci.1: irq 71, io mem 0xf1c14000
sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
ehci_irq: port change detect
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
[sw-ohci1]: open clock
sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
sw-ohci sw-ohci.1: irq 96, io mem 0xf1c14400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
[sw-ehci2]: open clock
[sw-ehci2]: Set USB Power ON
sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
ata1: SATA link down (SStatus 0 SControl 300)
ehci_irq: port change detect
sw-ehci sw-ehci.2: irq 72, io mem 0xf1c1c000
The port change to OHCI now!
sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
[sw-ohci2]: open clock
sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
sw-ohci sw-ohci.2: irq 97, io mem 0xf1c1c400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usb 2-1: new low-speed USB device number 2 using sw-ohci
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
mousedev: PS/2 mouse device common for all mice
sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
i2c /dev entries driver
config i2c gpio with gpio_config api
axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[AXP]axp driver uning configuration failed(323)
[AXP]power_start = 0
I2C: i2c-0: AW16XX I2C adapter
I2C: i2c-1: AW16XX I2C adapter
I2C: i2c-2: AW16XX I2C adapter
lirc_dev: IR Remote Control driver registered, major 251
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
[ace_drv] start!!!
[ace_drv] init end!!!
[pa_drv] start!!!
[pa_drv] init end!!!
axp20_ldo1: 1300 mV
axp20_ldo2: 1800 3300 mV at 3000 mV
axp20_ldo3: 700 3500 mV at 2800 mV
axp20_ldo4: 1250 3300 mV at 2800 mV
axp20_buck2: 700 2275 mV at 1400 mV
axp20_buck3: 700 3500 mV at 1250 mV
axp20_ldoio0: 1800 3300 mV at 2800 mV
input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
axp20_ldo2: Failed to create debugfs directory
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver ushc
[mmc-msg] sw_mci_init
[mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
[mmc-msg] sdc0 set round clock 400000, src 24000000
[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 Probe: base:0xf00d2000 irq:64 sg_cpu:ffdde000(4fc00000) ret 0.
[mmc-msg] sdc3 set round clock 400000, src 24000000
[mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc3 Probe: base:0xf00d4000 irq:67 sg_cpu:ffddd000(4fc01000) ret 0.
[mmc_pm]: no sdio card used in configuration
sunxi_leds driver init
Registered led device: green:ph20:led1
Registered led device: blue:ph21:led2
ledtrig-cpu: registered to indicate activity on CPUs
input: NOVATEK USB Keyboard as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.0/input/input1
generic-usb 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-sw-ohci-1/input0
input: NOVATEK USB Keyboard as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.1/input/input2
generic-usb 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-sw-ohci-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
IPv4 over IPv4 tunneling driver
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
Registering SWP/SWPB emulation handler
axp20_buck2: Failed to create debugfs directory
[cpu_freq] INF:-------------------V-F Table-------------------
[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
[cpu_freq] INF: voltage = 1400mv frequency = 912MHz
[cpu_freq] INF: voltage = 1300mv frequency = 864MHz
[cpu_freq] INF: voltage = 1200mv frequency = 720MHz
[cpu_freq] INF: voltage = 1100mv frequency = 528MHz
[cpu_freq] INF: voltage = 1050mv frequency = 312MHz
[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
[cpu_freq] INF:-----------------------------------------------
[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 384MHz
registered taskstats version 1
[DISP] Unsupported mode: 1280x800p60, ignoring
I2C: i2c-3: HDMI I2C adapter
ParseEDID
EDID version: 1.3
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
Using above mode as preferred EDID mode
PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
Unimplemented SVD code 16
Unimplemented SVD code 31
Unimplemented SVD code 33
Unimplemented SVD code 34
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 108100000 pclk
disp_clk: Could not find a matching pll-freq for 74200000 pclk
disp_clk: Could not find a matching pll-freq for 146850000 pclk
disp_clk: Could not find a matching pll-freq for 83650000 pclk
disp_clk: Could not find a matching pll-freq for 78800000 pclk
disp_clk: Could not find a matching pll-freq for 53450000 pclk
disp_clk: Could not find a matching pll-freq for 27100000 pclk
disp_clk: Could not find a matching pll-freq for 26150000 pclk
Parse_VideoData_Block: VIC 19 (native) support
Parse_VideoData_Block: VIC 4 support
Parse_VideoData_Block: VIC 5 support
Parse_VideoData_Block: VIC 20 support
Parse_VideoData_Block: VIC 3 support
Parse_VideoData_Block: VIC 18 support
Parse_VideoData_Block: VIC 16 support
Parse_VideoData_Block: VIC 31 support
Parse_VideoData_Block: VIC 32 support
Parse_VideoData_Block: VIC 33 support
Parse_VideoData_Block: VIC 34 support
Parse_AudioData_Block: max channel=2
Parse_AudioData_Block: SampleRate code=7
Parse_AudioData_Block: WordLen code=7
Find HDMI Vendor Specific DataBlock
PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
asoc: sndhdmi sunxi-hdmiaudio.0 mapping ok
[mmc-msg] mmc 0 detect change, present 1
waited 0 ms for EDID info
disp clks: lcd 148500000 pre_scale 1 hdmi 148500000 pll 297000000 2x 0
[mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 power on
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set round clock 400000, src 24000000
[mmc-err] smc 0 err, cmd 52, RTO
[mmc-err] smc 0 err, cmd 52, RTO
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-err] smc 0 err, cmd 5, RTO
[mmc-err] smc 0 err, cmd 5, RTO
[mmc-err] smc 0 err, cmd 5, RTO
[mmc-err] smc 0 err, cmd 5, RTO
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc0 set round clock 42857143, src 600000000
[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc0: new high speed SDHC card at address 1234
mmcblk0: mmc0:1234 SA08G 7.28 GiB
mmcblk0: p1
Console: switching to colour frame buffer device 240x67
axp20_buck3: incomplete constraints, leaving on
axp20_buck2: incomplete constraints, leaving on
axp20_ldo4: incomplete constraints, leaving on
axp20_ldo3: incomplete constraints, leaving on
axp20_ldo2: incomplete constraints, leaving on
axp20_ldo1: incomplete constraints, leaving on
sunxi-rtc sunxi-rtc: setting system clock to 2013-11-17 14:00:18 UTC (1384696818)
ALSA device list:
#0: sunxi-CODEC Audio Codec
#1: sunxi-sndhdmi
EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:1.
devtmpfs: mounted
Freeing init memory: 224K
udevd[172]: starting version 175
EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
sunxi_gpio driver init ver 1.3
GPIO irq support disabled in this platform
gpiochip_add: registered GPIOs 1 to 67 on device: A1X_GPIO
UMP: Inserting UMP device driver. Compiled: Sep 4 2013, time: 12:22:12
UMP: Using OS memory backend, allocation limit: 134217728
UMP: UMP device driver loaded
mali: use config clk_div 1
mali: clk_div 1
Mali: mali clock set completed, clock is 312000000 Hz
mali: use config clk_div 1
mali: clk_div 1
Mali: mali clock set completed, clock is 312000000 Hz
Mali: Mali device driver loaded
sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
eth0: no IPv6 routers present
ParseEDID
EDID version: 1.3
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
Unimplemented SVD code 16
Unimplemented SVD code 31
Unimplemented SVD code 33
Unimplemented SVD code 34
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 108100000 pclk
disp_clk: Could not find a matching pll-freq for 74200000 pclk
disp_clk: Could not find a matching pll-freq for 146850000 pclk
disp_clk: Could not find a matching pll-freq for 83650000 pclk
disp_clk: Could not find a matching pll-freq for 78800000 pclk
disp_clk: Could not find a matching pll-freq for 53450000 pclk
disp_clk: Could not find a matching pll-freq for 27100000 pclk
disp_clk: Could not find a matching pll-freq for 26150000 pclk
Parse_VideoData_Block: VIC 19 (native) support
Parse_VideoData_Block: VIC 4 support
Parse_VideoData_Block: VIC 5 support
Parse_VideoData_Block: VIC 20 support
Parse_VideoData_Block: VIC 3 support
Parse_VideoData_Block: VIC 18 support
Parse_VideoData_Block: VIC 16 support
Parse_VideoData_Block: VIC 31 support
Parse_VideoData_Block: VIC 32 support
Parse_VideoData_Block: VIC 33 support
Parse_VideoData_Block: VIC 34 support
Parse_AudioData_Block: max channel=2
Parse_AudioData_Block: SampleRate code=7
Parse_AudioData_Block: WordLen code=7
Find HDMI Vendor Specific DataBlock
PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN