dmesg - R9-2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-43-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #66~precise1-Ubuntu SMP Thu Oct 24 14:52:23 UTC 2013 (Ubuntu 3.5.0-43.66~precise1-generic 3.5.7.23)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf7cffff] usable
BIOS-e820: [mem 0x00000000cf7d0000-0x00000000cf7d2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf7d3000-0x00000000cf7effff] ACPI data
BIOS-e820: [mem 0x00000000cf7f0000-0x00000000cf7fffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. H61M-D2-B3/H61M-D2-B3, BIOS F5 05/13/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x42f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 0D0000000 mask FF0000000 uncachable
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 300000000 mask F00000000 write-back
6 base 400000000 mask FC0000000 write-back
7 base 430000000 mask FF0000000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 3328MB, range: 256MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 12GB, range: 4GB, type WB
reg 6, base: 16GB, range: 1GB, type WB
reg 7, base: 17152MB, range: 256MB, type UC
total RAM covered: 16384M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16896MB, range: 256MB, type WB
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf7d0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f57e0-0x000f57ef] mapped at [ffff8800000f57e0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0xcf7cffff]
[mem 0x00000000-0xcf5fffff] page 2M
[mem 0xcf600000-0xcf7cffff] page 4k
kernel direct mapping tables up to 0xcf7cffff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x42f7fffff]
[mem 0x100000000-0x42f7fffff] page 2M
kernel direct mapping tables up to 0x42f7fffff @ [mem 0xcf7c2000-0xcf7cffff]
RAMDISK: [mem 0x360da000-0x37064fff]
ACPI: RSDP 00000000000f6f30 00014 (v00 GBT )
ACPI: RSDT 00000000cf7d3040 00048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cf7d3100 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cf7d31c0 049C2 (v01 GBT GBTUACPI 00001000 MSFT 04000000)
ACPI: FACS 00000000cf7d0000 00040
ACPI: HPET 00000000cf7d7d00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cf7d7d80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: ASPT 00000000cf7d7e00 00034 (v07 GBT PerfTune 312E3042 UTBG 01010101)
ACPI: SSPT 00000000cf7d7e40 022F4 (v01 GBT SsptHead 312E3042 UTBG 01010101)
ACPI: EUDS 00000000cf7da140 000C0 (v01 GBT 00000000 00000000)
ACPI: TAMG 00000000cf7da200 00442 (v01 GBT GBT B0 5455312E BG?? 45240101)
ACPI: APIC 00000000cf7d7c00 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000cf7da680 03E74 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042f7fffff]
Initmem setup node 0 [mem 0x00000000-0x42f7fffff]
NODE_DATA [mem 0x42f7fc000-0x42f7fffff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041ee00000-ffff88042edfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x42f7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009bfff]
node 0: [mem 0x00100000-0xcf7cffff]
node 0: [mem 0x100000000-0x42f7fffff]
On node 0 totalpages: 4190044
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3910 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 829456 pages, LIFO batch:31
Normal zone: 52192 pages used for memmap
Normal zone: 3288096 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cf7d0000 - 00000000cf7d3000
PM: Registered nosave memory: 00000000cf7d3000 - 00000000cf7f0000
PM: Registered nosave memory: 00000000cf7f0000 - 00000000cf800000
PM: Registered nosave memory: 00000000cf800000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
e820: [mem 0xcf800000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88042f400000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4121462
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16399240k/17555456k available (6828k kernel code, 795280k absent, 360936k reserved, 6340k data, 948k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3392.399 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.79 BogoMIPS (lpj=13569596)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 27643 entries in 108 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (54278.38 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcf7d0000-0xcf7d2fff] (12288 bytes)
dummy:
RTC time: 12:49:14, date: 11/16/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xff00-0xff07]
pci 0000:00:1f.2: reg 14: [io 0xfe00-0xfe03]
pci 0000:00:1f.2: reg 18: [io 0xfd00-0xfd07]
pci 0000:00:1f.2: reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:1f.2: reg 20: [io 0xfb00-0xfb1f]
pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
pci 0000:01:00.0: [1002:67b0] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xef800000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
pci 0000:01:00.0: reg 24: [mem 0xfbd80000-0xfbdbffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aac8] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 10: [mem 0xfbcfe000-0xfbcfffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0xde00-0xdeff]
pci 0000:03:00.0: reg 18: [mem 0xfbbff000-0xfbbfffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 10: [io 0xcf00-0xcf07]
pci 0000:04:00.0: reg 14: [io 0xce00-0xce03]
pci 0000:04:00.0: reg 18: [io 0xcd00-0xcd07]
pci 0000:04:00.0: reg 1c: [io 0xcc00-0xcc03]
pci 0000:04:00.0: reg 20: [io 0xcb00-0xcb1f]
pci 0000:04:00.0: reg 24: [mem 0xfbeff000-0xfbeff1ff]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf7d0000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f800000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3f]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0290-0x029f]
pnp 00:01: [io 0x0800-0x087f]
pnp 00:01: [io 0x0290-0x0294]
pnp 00:01: [io 0x0880-0x088f]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: [io 0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x0090]
pnp 00:02: [io 0x0094-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io 0x0378-0x037f]
pnp 00:08: [io 0x0778-0x077b]
pnp 00:08: [irq 7]
pnp 00:08: [dma 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:09: [io 0x0400-0x04cf]
pnp 00:09: [io 0x04d2-0x04ff]
system 00:09: [io 0x0400-0x04cf] has been reserved
system 00:09: [io 0x04d2-0x04ff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x1000-0x107f]
pnp 00:0a: [io 0x1080-0x10ff]
pnp 00:0a: [io 0x1100-0x117f]
pnp 00:0a: [io 0x1180-0x11ff]
system 00:0a: [io 0x1000-0x107f] has been reserved
system 00:0a: [io 0x1080-0x10ff] has been reserved
system 00:0a: [io 0x1100-0x117f] has been reserved
system 00:0a: [io 0x1180-0x11ff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
pnp 00:0b: [io 0x0454-0x0457]
system 00:0b: [io 0x0454-0x0457] has been reserved
system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0c: [mem 0xf4000000-0xf7ffffff]
system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x000db000-0x000dbfff]
pnp 00:0d: [mem 0x000f0000-0x000f7fff]
pnp 00:0d: [mem 0x000f8000-0x000fbfff]
pnp 00:0d: [mem 0x000fc000-0x000fffff]
pnp 00:0d: [mem 0xcf7d0000-0xcf7dffff]
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x00100000-0xcf7cffff]
pnp 00:0d: [mem 0xcf7e0000-0xcf7effff]
pnp 00:0d: [mem 0xfec00000-0xfec00fff]
pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
pnp 00:0d: [mem 0xfee00000-0xfee00fff]
pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
pnp 00:0d: [mem 0xfff00000-0xffffffff]
pnp 00:0d: [mem 0x000e0000-0x000effff]
pnp 00:0d: [mem 0x20000000-0x201fffff]
pnp 00:0d: [mem 0x40000000-0x400fffff]
pnp 00:0d: [mem 0xcf800000-0xcfffffff]
system 00:0d: [mem 0x000db000-0x000dbfff] has been reserved
system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0d: [mem 0xcf7d0000-0xcf7dffff] could not be reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0xcf7cffff] could not be reserved
system 00:0d: [mem 0xcf7e0000-0xcf7effff] could not be reserved
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
system 00:0d: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0d: [mem 0x40000000-0x400fffff] could not be reserved
system 00:0d: [mem 0xcf800000-0xcfffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0e: [mem 0xffb80000-0xffbfffff]
pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xf0000000-0xf000ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xd0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcb7c2000-0xcf7c1fff] (64MB) mapped at [ffff8800cb7c2000-ffff8800cf7c1fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1384606153.252:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 32029
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 15916k freed
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-43-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-43-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:02:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-43-generic xhci_hcd
usb usb3: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-43-generic xhci_hcd
usb usb4: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 5:293:835
rtc_cmos 00:04: setting system clock to 2013-11-16 12:49:14 UTC (1384606154)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 948k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1352k freed
Freeing unused kernel memory: 1060k freed
udevd[115]: starting version 175
xor: automatically using best checksumming function:
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 49 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xffffc90001876000, 1c:6f:65:cd:32:74, XID 0c900800 IRQ 49
r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 50 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
avx : 22753.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
scsi0 : ahci
md: raid1 personality registered for level 1
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 50
ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 50
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 50
ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 50
ahci 0000:04:00.0: irq 51 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfbeff000 port 0xfbeff100 irq 51
ata8: SATA max UDMA/133 abar m512@0xfbeff000 port 0xfbeff180 irq 51
async_tx: api initialized (async)
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
ata7.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
sd 0:0:0:0: [sda] Attached SCSI disk
ata7.00: configured for UDMA/133
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
md: bind
usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
usb 1-1.1: New USB device found, idVendor=0409, idProduct=005a
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
Refined TSC clocksource calibration: 3392.294 MHz.
Switching to clocksource tsc
usb 1-1.2: new full-speed USB device number 4 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=1532, idProduct=010e
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: Razer BlackWidow
usb 1-1.2: Manufacturer: Razer
usb 1-1.3: new high-speed USB device number 5 using ehci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-1.3: New USB device found, idVendor=152e, idProduct=2571
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: Portable Super Multi Drive
usb 1-1.3: Manufacturer: HLDS Inc
usb 1-1.3: SerialNumber: HitachLGda000000094
Initializing USB Mass Storage driver...
scsi8 : usb-storage 1-1.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
md: bind
usb 2-1.1: New USB device found, idVendor=0781, idProduct=5580
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Extreme
usb 2-1.1: Manufacturer: SanDisk
usb 2-1.1: SerialNumber: AA010516122313393362
scsi9 : usb-storage 2-1.1:1.0
usb 2-1.5: new high-speed USB device number 4 using ehci_hcd
usb 2-1.5: New USB device found, idVendor=059f, idProduct=1018
usb 2-1.5: New USB device strings: Mfr=10, Product=11, SerialNumber=3
usb 2-1.5: Product: LaCie Hard Drive USB
usb 2-1.5: Manufacturer: LaCie
usb 2-1.5: SerialNumber: 0d03a789794a130246000000
scsi10 : usb-storage 2-1.5:1.0
usb 2-1.6: new low-speed USB device number 5 using ehci_hcd
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
usb 2-1.6: New USB device found, idVendor=0592, idProduct=0002
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: Powerware UPS
usb 2-1.6: Manufacturer: Powerware
md: bind
usb 1-1.1.1: new full-speed USB device number 6 using ehci_hcd
usb 1-1.1.1: New USB device found, idVendor=0a12, idProduct=0001
usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1.1.3: new low-speed USB device number 7 using ehci_hcd
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
scsi 6:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5
sd 6:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1.1.3: New USB device found, idVendor=046d, idProduct=c043
usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.3: Product: USB-PS/2 Optical Mouse
usb 1-1.1.3: Manufacturer: Logitech
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI disk
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi 8:0:0:0: CD-ROM HL-DT-ST BD-RE BP06LU10 HL03 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
sr 8:0:0:0: Attached scsi generic sg5 type 5
md: bind
scsi 9:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 9:0:0:0: Attached scsi generic sg6 type 0
sd 9:0:0:0: [sdf] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 9:0:0:0: [sdf] Write Protect is off
sd 9:0:0:0: [sdf] Mode Sense: 53 00 00 08
sd 9:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1 sdf2 < sdf5 >
sd 9:0:0:0: [sdf] Attached SCSI removable disk
scsi 10:0:0:0: Direct-Access Hitachi HDT721010SLA360 PQ: 0 ANSI: 2 CCS
sd 10:0:0:0: Attached scsi generic sg7 type 0
sd 10:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 10:0:0:0: [sdg] Write Protect is off
sd 10:0:0:0: [sdg] Mode Sense: 34 00 00 00
sd 10:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdg: unknown partition table
sd 10:0:0:0: [sdg] Attached SCSI disk
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg8 type 0
sd 7:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 7:0:0:0: [sdh] Write Protect is off
sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdh: sdh1
sd 7:0:0:0: [sdh] Attached SCSI disk
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
hid-generic 0003:1532:010E.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:1a.0-1.2/input0
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input3
hid-generic 0003:1532:010E.0002: input,hidraw1: USB HID v1.11 Device [Razer Razer BlackWidow] on usb-0000:00:1a.0-1.2/input1
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input4
hid-generic 0003:1532:010E.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow] on usb-0000:00:1a.0-1.2/input2
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/input/input5
hid-generic 0003:046D:C043.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.1.3/input0
raid6: sse2x1 9785 MB/s
md: bind
raid6: sse2x2 12278 MB/s
raid6: sse2x4 14368 MB/s
raid6: using algorithm sse2x4 (14368 MB/s)
raid6: using ssse3x2 recovery algorithm
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
md: bind
bio: create slab at 1
md/raid:md127: device sdh1 operational as raid disk 5
md/raid:md127: device sde1 operational as raid disk 4
md/raid:md127: device sdd1 operational as raid disk 1
md/raid:md127: device sdc1 operational as raid disk 0
md/raid:md127: device sdb1 operational as raid disk 2
md/raid:md127: device sda1 operational as raid disk 3
md/raid:md127: allocated 6448kB
md/raid:md127: raid level 5 active with 6 out of 6 devices, algorithm 2
RAID conf printout:
--- level:5 rd:6 wd:6
disk 0, o:1, dev:sdc1
disk 1, o:1, dev:sdd1
disk 2, o:1, dev:sdb1
disk 3, o:1, dev:sda1
disk 4, o:1, dev:sde1
disk 5, o:1, dev:sdh1
created bitmap (15 pages) for device md127
md127: bitmap initialized from disk: read 1 pages, set 0 of 29807 bits
md127: detected capacity change from 0 to 10001307402240
md127: unknown partition table
EXT4-fs (sdf1): INFO: recovery required on readonly filesystem
EXT4-fs (sdf1): write access will be enabled during recovery
EXT4-fs (sdf1): orphan cleanup on readonly fs
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 394042
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 393935
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 282302
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 282197
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 393930
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 393203
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 393196
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 282500
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 393145
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 393142
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 393137
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 393119
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 392749
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 392705
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 507915
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 507914
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 398958
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 504383
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 504384
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 505533
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 505411
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 501834
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 398974
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 434434
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 407529
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 507849
EXT4-fs (sdf1): ext4_orphan_cleanup: deleting unreferenced inode 507848
EXT4-fs (sdf1): 27 orphan inodes deleted
EXT4-fs (sdf1): recovery complete
EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
Adding 8370172k swap on /dev/sdf5. Priority:-1 extents:1 across:8370172k
EXT4-fs (sdf1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[725]: starting version 175
lp: driver loaded but no devices found
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this sytem
snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
type=1400 audit(1384606173.153:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=877 comm="apparmor_parser"
type=1400 audit(1384606173.153:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=877 comm="apparmor_parser"
type=1400 audit(1384606173.153:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=877 comm="apparmor_parser"
usbcore: registered new interface driver btusb
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
device-mapper: multipath: version 1.4.0 loaded
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 53 for MSI/MSI-X
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 54 for MSI/MSI-X
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \TCOI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei 0000:00:16.0: wd: failed to find the client
lp0: using parport0 (interrupt-driven).
gpio_ich: GPIO from 180 to 255 on gpio_ich
init: failsafe main process (1071) killed by TERM signal
type=1400 audit(1384606173.225:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1129 comm="apparmor_parser"
type=1400 audit(1384606173.225:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1129 comm="apparmor_parser"
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x14
microcode: Microcode Update Driver: v2.00 , Peter Oruba
type=1400 audit(1384606173.277:7): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1284 comm="apparmor_parser"
type=1400 audit(1384606173.277:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1281 comm="apparmor_parser"
type=1400 audit(1384606173.277:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1281 comm="apparmor_parser"
type=1400 audit(1384606173.277:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1281 comm="apparmor_parser"
type=1400 audit(1384606173.277:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1280 comm="apparmor_parser"
r8169 0000:03:00.0: eth0: link down
r8169 0000:03:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 15659 MBytes.
[fglrx] vendor: 1002 device: 67b0 count: 1
[fglrx] ioport: bar 4, base 0xee00, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.25.5 [Oct 24 2013] with 1 minors
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90007580000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
fglrx_pci 0000:01:00.0: irq 55 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1748
[fglrx] Firegl kernel thread PID: 1749
[fglrx] Firegl kernel thread PID: 1750
[fglrx] IRQ 55 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f778000, size:4000
[fglrx] Reserved FB block: Unshared offset:f77c000, size:484000
[fglrx] Reserved FB block: Unshared offset:fc00000, size:100000
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000
[fglrx] Reserved FB block: Unshared offset:ffff4000, size:c000
init: plymouth-stop pre-start process (2112) terminated with status 1
usb 2-1.6: usbfs: process 1776 (Eaton-IPP) did not claim interface 9 before use
r8169 0000:03:00.0: eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md127): recovery complete
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
audit_printk_skb: 42 callbacks suppressed
type=1400 audit(1384606492.114:26): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1199 comm="cupsd" pid=1199 comm="cupsd" capability=36 capname="block_suspend"
type=1400 audit(1384606953.795:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1199 comm="cupsd" pid=1199 comm="cupsd" capability=36 capname="block_suspend"
type=1400 audit(1384607332.863:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1199 comm="cupsd" pid=1199 comm="cupsd" capability=36 capname="block_suspend"
type=1400 audit(1384608515.187:29): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1199 comm="cupsd" pid=1199 comm="cupsd" capability=36 capname="block_suspend"
type=1400 audit(1384609012.863:30): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1199 comm="cupsd" pid=1199 comm="cupsd" capability=36 capname="block_suspend"
warning: process `MetroLL' used the deprecated sysctl system call with 10.1.
type=1400 audit(1384614892.615:31): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1199 comm="cupsd" pid=1199 comm="cupsd" capability=36 capname="block_suspend"
MetroLL[29509]: segfault at 10002 ip 0000000008ef89b2 sp 00000000fff8f800 error 4 in MetroLL[8048000+1336000]
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
type=1400 audit(1384617883.063:32): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1199 comm="cupsd" pid=1199 comm="cupsd" capability=36 capname="block_suspend"
type=1400 audit(1384621612.859:33): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1199 comm="cupsd" pid=1199 comm="cupsd" capability=36 capname="block_suspend"
md: requested-resync of RAID array md127
md: minimum _guaranteed_ speed: 50000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 5000000 KB/sec) for requested-resync.
md: using 128k window, over a total of 1953380352k.