dmesg - Tue004
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.7-200.fc19.x86_64 (mockbuild@bkernel02) (gcc version 4.8.2 20131017 (Red Hat 4.8.2-1) (GCC) ) #1 SMP Mon Nov 4 14:09:03 UTC 2013
Command line: BOOT_IMAGE=/vmlinuz-3.11.7-200.fc19.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root rhgb quiet LANG=zh_TW.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c87fefff] usable
BIOS-e820: [mem 0x00000000c87ff000-0x00000000c8805fff] ACPI NVS
BIOS-e820: [mem 0x00000000c8806000-0x00000000c9044fff] usable
BIOS-e820: [mem 0x00000000c9045000-0x00000000c9412fff] reserved
BIOS-e820: [mem 0x00000000c9413000-0x00000000d93cbfff] usable
BIOS-e820: [mem 0x00000000d93cc000-0x00000000d9461fff] reserved
BIOS-e820: [mem 0x00000000d9462000-0x00000000d94c0fff] usable
BIOS-e820: [mem 0x00000000d94c1000-0x00000000d95e8fff] ACPI NVS
BIOS-e820: [mem 0x00000000d95e9000-0x00000000d9ffefff] reserved
BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
BIOS-e820: [mem 0x00000000dc000000-0x00000000de1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000220dfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Supermicro X10SLV-Q/X10SLV-Q, BIOS 1.0a 10/04/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x220e00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 0220000000 mask 7FFF800000 write-back
3 base 0220800000 mask 7FFFC00000 write-back
4 base 0220C00000 mask 7FFFE00000 write-back
5 base 00E0000000 mask 7FE0000000 uncachable
6 base 00DC000000 mask 7FFC000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ffff8800000fd6f0]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x220c00000-0x220dfffff]
[mem 0x220c00000-0x220dfffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x220bfffff]
[mem 0x220000000-0x220bfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc87fefff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc85fffff] page 2M
[mem 0xc8600000-0xc87fefff] page 4k
init_memory_mapping: [mem 0xc8806000-0xc9044fff]
[mem 0xc8806000-0xc89fffff] page 4k
[mem 0xc8a00000-0xc8ffffff] page 2M
[mem 0xc9000000-0xc9044fff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
init_memory_mapping: [mem 0xc9413000-0xd93cbfff]
[mem 0xc9413000-0xc95fffff] page 4k
[mem 0xc9600000-0xd91fffff] page 2M
[mem 0xd9200000-0xd93cbfff] page 4k
init_memory_mapping: [mem 0xd9462000-0xd94c0fff]
[mem 0xd9462000-0xd94c0fff] page 4k
init_memory_mapping: [mem 0xd9fff000-0xd9ffffff]
[mem 0xd9fff000-0xd9ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x36e08000-0x376fbfff]
ACPI: RSDP 00000000000f0490 00024 (v02 SUPERM)
ACPI: XSDT 00000000d95c5080 00084 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FACP 00000000d95cf650 0010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: DSDT 00000000d95c51a0 0A4AB (v02 SUPERM SMCI--MB 00000000 INTL 20120711)
ACPI: FACS 00000000d95e7080 00040
ACPI: APIC 00000000d95cf760 00072 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FPDT 00000000d95cf7d8 00044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: SSDT 00000000d95cf820 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000d95cfd60 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 00000000d95d0838 002DE (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: SSDT 00000000d95d0b18 00348 (v01 PmRef ApTst 00003000 INTL 20051117)
ACPI: MCFG 00000000d95d0e60 0003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: HPET 00000000d95d0ea0 00038 (v01 SUPERM SMCI--MB 01072009 AMI. 00000005)
ACPI: SSDT 00000000d95d0ed8 00397 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000d95d1270 032DD (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 00000000d95d4550 00090 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000220dfffff]
Initmem setup node 0 [mem 0x00000000-0x220dfffff]
NODE_DATA [mem 0x220de6000-0x220df9fff]
[ffffea0000000000-ffffea00089fffff] PMD -> [ffff880218200000-ffff8802203fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x220dfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xc87fefff]
node 0: [mem 0xc8806000-0xc9044fff]
node 0: [mem 0xc9413000-0xd93cbfff]
node 0: [mem 0xd9462000-0xd94c0fff]
node 0: [mem 0xd9fff000-0xd9ffffff]
node 0: [mem 0x100000000-0x220dfffff]
On node 0 totalpages: 2072051
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13826 pages used for memmap
DMA32 zone: 884823 pages, LIFO batch:31
Normal zone: 18488 pages used for memmap
Normal zone: 1183232 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc87ff000-0xc8805fff]
PM: Registered nosave memory: [mem 0xc9045000-0xc9412fff]
PM: Registered nosave memory: [mem 0xd93cc000-0xd9461fff]
PM: Registered nosave memory: [mem 0xd94c1000-0xd95e8fff]
PM: Registered nosave memory: [mem 0xd95e9000-0xd9ffefff]
PM: Registered nosave memory: [mem 0xda000000-0xdbffffff]
PM: Registered nosave memory: [mem 0xdc000000-0xde1fffff]
PM: Registered nosave memory: [mem 0xde200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xde200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880220a00000 s85568 r8192 d20928 u524288
pcpu-alloc: s85568 r8192 d20928 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2039652
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.7-200.fc19.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root rhgb quiet LANG=zh_TW.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: American Megatrends Inc.; Ver: 1.0a; Product Version: 0123456789
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.7-200.fc19.x86_64 #1
Hardware name: Supermicro X10SLV-Q/X10SLV-Q, BIOS 1.0a 10/04/2013
000000000000000b ffffffff81c01df0 ffffffff8164777b ffffffff81c01e38
ffffffff81c01e28 ffffffff8106715d ffffffff81fe401c ffffffff81fe4048
0000000000000000 ffff880220db2a80 ffffffff81e68000 ffffffff81c01e88
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt_taint+0x44/0x50
[] ? early_ioremap+0x13/0x15
[] ? __acpi_map_table+0x13/0x18
[] warn_invalid_dmar+0x7e/0x90
[] check_zero_address+0x68/0xf4
[] detect_intel_iommu+0x15/0xae
[] pci_iommu_alloc+0x4a/0x6c
[] mem_init+0xf/0x8d
[] start_kernel+0x1de/0x416
[] ? repair_env_string+0x5c/0x5c
[] ? early_idt_handlers+0x120/0x120
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x108/0x117
---[ end trace 66fdb2797fda80b4 ]---
Memory: 8062772K/8288204K available (6507K kernel code, 990K rwdata, 2868K rodata, 1420K init, 1540K bss, 225432K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
NR_IRQS:8448 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 34078720 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3400.377 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.75 BogoMIPS (lpj=3400377)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 24K (ffffffff81e5c000 - ffffffff81e62000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 25153 entries in 99 pages
dmar: Host address width 39
dmar: DRHD base: 0x00000000000000 flags: 0x1
dmar: parse DMAR table failure.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (27203.01 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xc87ff000-0xc8805fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xd94c1000-0xd95e8fff] (1212416 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
RTC time: 4:49:03, date: 11/11/13
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000d9457c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000d9457618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000d9456d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xde200000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0x220e00000-0x620dfffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7d38000-0xf7d38fff]
pci 0000:00:19.0: reg 0x18: [io 0xf060-0xf07f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7d37000-0xf7d373ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x620d00000-0x620d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7d36000-0xf7d363ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7d35000-0xf7d357ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7d34000-0xf7d340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0x620d04000-0x620d04fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c7ffff]
pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:02:00.0: reg 0x1c: [mem 0xf7c80000-0xf7c83fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc87ff000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc9045000-0xcbffffff]
e820: reserve RAM buffer [mem 0xd93cc000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd94c1000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x220e00000-0x223ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1c00-0x1cfe] has been reserved
system 00:05: [io 0x1d00-0x1dfe] has been reserved
system 00:05: [io 0x1e00-0x1efe] has been reserved
system 00:05: [io 0x1f00-0x1ffe] has been reserved
system 00:05: [io 0x0ca4-0x0ca7] has been reserved
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x0290-0x029f] has been reserved
system 00:09: [io 0x02a0-0x02af] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
ACPI: IRQ 4 override to edge, high
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 3 override to edge, high
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 3 override to edge, high
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 3 override to edge, high
pnp 00:0d: [dma 0 disabled]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 3 override to edge, high
pnp 00:0e: [dma 0 disabled]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0f: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0f: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0f: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0f: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0f: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0f: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0f: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0f: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0f: [mem 0xff000000-0xffffffff] has been reserved
system 00:0f: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0f: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:0f: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 16 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xde200000-0xde3fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xde400000-0xde5fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xde200000-0xde3fffff]
pci 0000:00:1c.0: bridge window [mem 0xde400000-0xde5fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xde200000-0xfeafffff]
pci_bus 0000:00: resource 14 [mem 0x220e00000-0x620dfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xde200000-0xde3fffff]
pci_bus 0000:01: resource 2 [mem 0xde400000-0xde5fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 9168K (ffff880036e08000 - ffff8800376fc000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd53cc000-0xd93cc000] (64MB) mapped at [ffff8800d53cc000-ffff8800d93cbfff]
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1384145343.244:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15765
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Asymmetric key parser 'pefile' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0c: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
00:0d: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
serial 00:0e: disabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7d35000 port 0xf7d35100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf7d35000 port 0xf7d35180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xf7d35000 port 0xf7d35200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xf7d35000 port 0xf7d35280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xf7d35000 port 0xf7d35300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xf7d35000 port 0xf7d35380 irq 42
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d37000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.7-200.fc19.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d36000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.7-200.fc19.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.7-200.fc19.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.7-200.fc19.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3400.015 MHz
ata3: SATA link down (SStatus 0 SControl 300)
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 81c09e5678f2460566af2ede383d4b66d9cd13f7'
registered taskstats version 1
Magic number: 5:67:818
button PNP0C0C:00: hash matches
rtc_cmos 00:06: setting system clock to 2013-11-11 04:49:05 UTC (1384145345)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1420K (ffffffff81cf9000 - ffffffff81e5c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1672K (ffff88000165e000 - ffff880001800000)
Freeing unused kernel memory: 1228K (ffff880001acd000 - ffff880001c00000)
systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Expecting device dev-mapper-fedora\x2dswap.device...
systemd[1]: Expecting device dev-mapper-fedora\x2droot.device...
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Local File Systems.
systemd-journald[94]: Vacuuming done, freed 0 bytes
usb 3-3: new full-speed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input2
hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input3
hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
Switched to clocksource tsc
systemd-udevd[183]: starting version 204
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 3-4: new high-speed USB device number 3 using xhci_hcd
usb 3-4: New USB device found, idVendor=08e4, idProduct=0147
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: DVR-X162
usb 3-4: Manufacturer: Pioneer
usb 3-4: SerialNumber: 00101016400098FF5
fbcon: inteldrmfb (fb0) is primary device
usb-storage 3-4:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-4:1.0
usbcore: registered new interface driver usb-storage
Console: switching to colour frame buffer device 180x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:58: registered as cooling_device9
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
bio: create slab at 1
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[94]: Received SIGTERM
scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-216 1.09 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg1 type 5
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
type=1404 audit(1384145347.819:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 95731 rules.
SELinux: 2048 avtab hash slots, 95731 rules.
SELinux: 8 users, 82 roles, 4552 types, 259 bools, 1 sens, 1024 cats
SELinux: 83 classes, 95731 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev dm-1, type ext4), uses xattr
type=1403 audit(1384145348.270:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 508.871ms.
systemd[1]: Relabelled /dev and /run in 10.163ms.
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
systemd-journald[346]: Vacuuming done, freed 0 bytes
systemd-udevd[371]: starting version 204
EXT4-fs (dm-1): re-mounted. Opts: (null)
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x10
PTP clock support registered
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x10
microcode: CPU0 updated to revision 0x16, date = 2013-08-07
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x10
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x10
microcode: CPU1 updated to revision 0x16, date = 2013-08-07
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x10
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x10
microcode: CPU2 updated to revision 0x16, date = 2013-08-07
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x10
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x10
microcode: CPU3 updated to revision 0x16, date = 2013-08-07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:9c:33:a4
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 0110FF-0FF
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:02:00.0: irq 47 for MSI/MSI-X
igb 0000:02:00.0: irq 48 for MSI/MSI-X
igb 0000:02:00.0: irq 49 for MSI/MSI-X
igb 0000:02:00.0: irq 50 for MSI/MSI-X
igb 0000:02:00.0: irq 51 for MSI/MSI-X
igb 0000:02:00.0: added PHC on eth1
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:25:90:9c:33:a5
igb 0000:02:00.0: eth1: PBA No: 011A00-000
igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
alg: No test for crc32 (crc32-pclmul)
systemd-udevd[378]: renamed network interface eth0 to em1
systemd-udevd[383]: renamed network interface eth1 to p3p1
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:03.0: irq 52 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
ALSA sound/pci/hda/hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 5[1]:0
ALSA sound/pci/hda/hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 6[1]:0
ALSA sound/pci/hda/hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 7[1]:0
input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5
input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
ALSA sound/pci/hda/patch_realtek.c:418 SKU: Nid=0x1d sku_cfg=0x4026c619
ALSA sound/pci/hda/patch_realtek.c:420 SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:421 SKU: enable_pcbeep=0x0
ALSA sound/pci/hda/patch_realtek.c:422 SKU: check_sum=0x00000006
ALSA sound/pci/hda/patch_realtek.c:423 SKU: customization=0x000000c6
ALSA sound/pci/hda/patch_realtek.c:424 SKU: external_amp=0x3
ALSA sound/pci/hda/patch_realtek.c:425 SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:426 SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:427 SKU: override=0x1
ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x19
ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18
ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a
ALSA sound/pci/hda/patch_realtek.c:490 realtek: No valid SSID, checking pincfg 0x4026c619 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:506 realtek: Enabling init ASM_ID=0xc619 CODEC_ID=10ec0888
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
Adding 8142844k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8142844k FS
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-2, type ext4), uses xattr
systemd-journald[346]: Received request to flush runtime journal from PID 1
type=1305 audit(1384145359.391:4): audit_pid=477 old=0 auid=4294967295 ses=4294967295
subj=system_u:system_r:auditd_t:s0 res=1
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Bridge firewalling registered
systemd-logind[502]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[502]: Watching system buttons on /dev/input/event4 (Video Bus)
systemd-logind[502]: Watching system buttons on /dev/input/event0 (Power Button)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
fuse init (API version 7.22)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
tiger-demo[29914]: segfault at 1 ip 00007f864ad21df9 sp 00007fff3e9c40f0 error 4 in libc-2.17.so[7f864acd9000+1b6000]
tiger-demo[29921]: segfault at 1 ip 00007f5d93d50df9 sp 00007ffff8f64c90 error 4 in libc-2.17.so[7f5d93d08000+1b6000]
tiger-demo[29928]: segfault at 1 ip 00007f19695dddf9 sp 00007fff6636cd50 error 4 in libc-2.17.so[7f1969595000+1b6000]
usb 3-3: USB disconnect, device number 2
usb 3-3: new full-speed USB device number 4 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input13
hid-generic 0003:046D:C52E.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input14
hid-generic 0003:046D:C52E.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 4
usb 3-3: new full-speed USB device number 5 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input15
hid-generic 0003:046D:C52E.0005: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input16
hid-generic 0003:046D:C52E.0006: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 5
usb 3-3: new full-speed USB device number 6 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input17
hid-generic 0003:046D:C52E.0007: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input18
hid-generic 0003:046D:C52E.0008: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 6
usb 3-3: new full-speed USB device number 7 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input19
hid-generic 0003:046D:C52E.0009: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input20
hid-generic 0003:046D:C52E.000A: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 7
usb 3-3: new full-speed USB device number 8 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input21
hid-generic 0003:046D:C52E.000B: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input22
hid-generic 0003:046D:C52E.000C: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 8
usb 3-3: new full-speed USB device number 9 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input23
hid-generic 0003:046D:C52E.000D: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input24
hid-generic 0003:046D:C52E.000E: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 9
usb 3-3: new full-speed USB device number 10 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input25
hid-generic 0003:046D:C52E.000F: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input26
hid-generic 0003:046D:C52E.0010: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
perf samples too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 3-3: USB disconnect, device number 10
usb 3-3: new full-speed USB device number 11 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input27
hid-generic 0003:046D:C52E.0011: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input28
hid-generic 0003:046D:C52E.0012: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 11
usb 3-3: new full-speed USB device number 12 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input29
hid-generic 0003:046D:C52E.0013: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input30
hid-generic 0003:046D:C52E.0014: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 12
usb 3-3: new full-speed USB device number 13 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input31
hid-generic 0003:046D:C52E.0015: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input32
hid-generic 0003:046D:C52E.0016: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 13
usb 3-3: new full-speed USB device number 14 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input33
hid-generic 0003:046D:C52E.0017: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input34
hid-generic 0003:046D:C52E.0018: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 14
usb 3-3: new full-speed USB device number 15 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input35
hid-generic 0003:046D:C52E.0019: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input36
hid-generic 0003:046D:C52E.001A: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 15
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
usb 3-3: new full-speed USB device number 16 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input37
hid-generic 0003:046D:C52E.001B: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input38
hid-generic 0003:046D:C52E.001C: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 16
usb 3-3: new full-speed USB device number 17 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input39
hid-generic 0003:046D:C52E.001D: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input40
hid-generic 0003:046D:C52E.001E: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 17
usb 3-3: new full-speed USB device number 18 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input41
hid-generic 0003:046D:C52E.001F: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input42
hid-generic 0003:046D:C52E.0020: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 18
usb 3-3: new full-speed USB device number 19 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input43
hid-generic 0003:046D:C52E.0021: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input44
hid-generic 0003:046D:C52E.0022: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 19
usb 3-3: new full-speed USB device number 20 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input45
hid-generic 0003:046D:C52E.0023: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input46
hid-generic 0003:046D:C52E.0024: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 20
usb 3-3: new full-speed USB device number 21 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input47
hid-generic 0003:046D:C52E.0025: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input48
hid-generic 0003:046D:C52E.0026: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 21
usb 3-3: new full-speed USB device number 22 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input49
hid-generic 0003:046D:C52E.0027: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input50
hid-generic 0003:046D:C52E.0028: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 22
usb 3-3: new full-speed USB device number 23 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input51
hid-generic 0003:046D:C52E.0029: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input52
hid-generic 0003:046D:C52E.002A: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 23
usb 3-3: new full-speed USB device number 24 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input53
hid-generic 0003:046D:C52E.002B: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input54
hid-generic 0003:046D:C52E.002C: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 24
usb 3-3: new full-speed USB device number 25 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input55
hid-generic 0003:046D:C52E.002D: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input56
hid-generic 0003:046D:C52E.002E: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 25
usb 3-3: new full-speed USB device number 26 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input57
hid-generic 0003:046D:C52E.002F: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input58
hid-generic 0003:046D:C52E.0030: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 26
usb 3-3: new full-speed USB device number 27 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input59
hid-generic 0003:046D:C52E.0031: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input60
hid-generic 0003:046D:C52E.0032: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 27
usb 3-3: new full-speed USB device number 28 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input61
hid-generic 0003:046D:C52E.0033: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input62
hid-generic 0003:046D:C52E.0034: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 28
usb 3-3: new full-speed USB device number 29 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input63
hid-generic 0003:046D:C52E.0035: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input64
hid-generic 0003:046D:C52E.0036: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 29
usb 3-3: new full-speed USB device number 30 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input65
hid-generic 0003:046D:C52E.0037: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input66
hid-generic 0003:046D:C52E.0038: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 30
usb 3-3: new full-speed USB device number 31 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input67
hid-generic 0003:046D:C52E.0039: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input68
hid-generic 0003:046D:C52E.003A: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 31
usb 3-3: new full-speed USB device number 32 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input69
hid-generic 0003:046D:C52E.003B: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input70
hid-generic 0003:046D:C52E.003C: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 3-3: USB disconnect, device number 32
usb 3-3: new full-speed USB device number 33 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input71
hid-generic 0003:046D:C52E.003D: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input72
hid-generic 0003:046D:C52E.003E: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1