dmesg - monserveur
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-56-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #86-Ubuntu SMP Wed Oct 23 09:20:45 UTC 2013 (Ubuntu 3.2.0-56.86-generic 3.2.51)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000094000 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000afdf0000 (usable)
[ 0.000000] BIOS-e820: 00000000afdf0000 - 00000000afdf1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afdf1000 - 00000000afe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afe00000 - 00000000aff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-880GMA-USB3/GA-880GMA-USB3, BIOS F4e 05/24/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000AFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 2560MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 2814MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 2814M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 2560MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 2814MB, range: 2MB, type UC
[ 0.000000] e820 update range: 00000000afe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xafdf0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4980] f4980
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000008f000] 8f000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000afdf0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00afc00000 page 2M
[ 0.000000] 00afc00000 - 00afdf0000 page 4k
[ 0.000000] kernel direct mapping tables up to afdf0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000022f000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 022f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 22f000000 @ afdee000-afdf0000
[ 0.000000] RAMDISK: 35786000 - 36bbb000
[ 0.000000] ACPI: RSDP 00000000000f6400 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000afdf1000 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000afdf1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000afdf1100 074B9 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000afdf0000 00040
[ 0.000000] ACPI: MSDM 00000000afdf8680 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET 00000000afdf8700 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000afdf8740 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000afdf8780 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000afdf87f0 00182 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000afdf85c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000022f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000022f000000
[ 0.000000] NODE_DATA [000000022effb000 - 000000022effffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226e00000-ffff88022e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0022f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000094
[ 0.000000] 0: 0x00000100 -> 0x000afdf0
[ 0.000000] 0: 0x00100000 -> 0x0022f000
[ 0.000000] On node 0 totalpages: 1961332
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3903 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 699952 pages, LIFO batch:31
[ 0.000000] Normal zone: 19392 pages used for memmap
[ 0.000000] Normal zone: 1221696 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000094000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000afdf0000 - 00000000afdf1000
[ 0.000000] PM: Registered nosave memory: 00000000afdf1000 - 00000000afe00000
[ 0.000000] PM: Registered nosave memory: 00000000afe00000 - 00000000aff00000
[ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:30100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022ec00000 s83136 r8192 d23360 u262144
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1925551
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 54e000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ a4000000
[ 0.000000] PM: Registered nosave memory: 00000000a4000000 - 00000000a8000000
[ 0.000000] Memory: 7553440k/9158656k available (6585k kernel code, 1313328k absent, 291888k reserved, 6620k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3817.064 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7634.12 BogoMIPS (lpj=15268256)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004027] Security Framework initialized
[ 0.004037] AppArmor: AppArmor initialized
[ 0.004038] Yama: becoming mindful.
[ 0.004549] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006665] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008581] Mount-cache hash table entries: 256
[ 0.008687] Initializing cgroup subsys cpuacct
[ 0.008691] Initializing cgroup subsys memory
[ 0.008699] Initializing cgroup subsys devices
[ 0.008701] Initializing cgroup subsys freezer
[ 0.008702] Initializing cgroup subsys blkio
[ 0.008707] Initializing cgroup subsys perf_event
[ 0.008728] tseg: 00aff00000
[ 0.008730] CPU: Physical Processor ID: 0
[ 0.008731] CPU: Processor Core ID: 0
[ 0.008732] mce: CPU supports 7 MCE banks
[ 0.010088] ACPI: Core revision 20110623
[ 0.012021] ftrace: allocating 26595 entries in 105 pages
[ 0.020345] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060042] CPU0: AMD FX(tm)-4100 Quad-Core Processor stepping 02
[ 0.064003] Performance Events: AMD Family 15h PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 6
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000003f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 8f000
[ 0.152029] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152117] #2
[ 0.152119] smpboot cpu 2: start_ip = 8f000
[ 0.244027] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244086] #3
[ 0.244088] smpboot cpu 3: start_ip = 8f000
[ 0.336032] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336048] Brought up 4 CPUs
[ 0.336050] Total of 4 processors activated (30534.82 BogoMIPS).
[ 0.340161] devtmpfs: initialized
[ 0.340926] EVM: security.selinux
[ 0.340928] EVM: security.SMACK64
[ 0.340929] EVM: security.capability
[ 0.341015] PM: Registering ACPI NVS region at afdf0000 (4096 bytes)
[ 0.344483] print_constraints: dummy:
[ 0.344504] RTC time: 9:08:46, date: 11/11/13
[ 0.344534] NET: Registered protocol family 16
[ 0.344630] Extended Config Space enabled on 1 nodes
[ 0.344542] Trying to unpack rootfs image as initramfs...
[ 0.344652] ACPI: bus type pci registered
[ 0.344702] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.344705] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.368827] PCI: Using configuration type 1 for base access
[ 0.369703] bio: create slab at 0
[ 0.369703] ACPI: Added _OSI(Module Device)
[ 0.369703] ACPI: Added _OSI(Processor Device)
[ 0.369703] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.369703] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.369703] ACPI: EC: Look up EC in DSDT
[ 0.376143] ACPI Warning: Incorrect checksum in table [TAMG] - 0xD2, should be 0xD1 (20110623/tbutils-314)
[ 0.376278] ACPI: Interpreter enabled
[ 0.376282] ACPI: (supports S0 S1 S4 S5)
[ 0.376302] ACPI: Using IOAPIC for interrupt routing
[ 0.590363] ACPI: No dock devices found.
[ 0.590366] HEST: Table not found.
[ 0.590369] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.590428] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.590552] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.590554] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.590557] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.590559] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.590561] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.590574] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.590586] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.590626] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
[ 0.590668] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 0.590702] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.590705] pci 0000:00:09.0: PME# disabled
[ 0.590718] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.590751] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.590754] pci 0000:00:0a.0: PME# disabled
[ 0.590776] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.590791] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.590799] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.590807] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.590814] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.590822] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.590830] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.590877] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.590887] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.590944] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.590959] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
[ 0.591024] pci 0000:00:12.2: supports D1 D2
[ 0.591025] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.591029] pci 0000:00:12.2: PME# disabled
[ 0.591046] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.591056] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.591114] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.591129] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
[ 0.591193] pci 0000:00:13.2: supports D1 D2
[ 0.591195] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.591199] pci 0000:00:13.2: PME# disabled
[ 0.591215] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.591278] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.591295] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.591354] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.591357] pci 0000:00:14.2: PME# disabled
[ 0.591370] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.591431] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.591464] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.591474] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.591531] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.591589] pci 0000:00:15.0: supports D1 D2
[ 0.591609] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.591668] pci 0000:00:15.1: supports D1 D2
[ 0.591691] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.591702] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
[ 0.591759] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.591774] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
[ 0.591839] pci 0000:00:16.2: supports D1 D2
[ 0.591840] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.591844] pci 0000:00:16.2: PME# disabled
[ 0.591860] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[ 0.591880] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[ 0.591894] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[ 0.591908] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[ 0.591927] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[ 0.591941] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[ 0.591984] pci 0000:01:05.0: [1002:9715] type 0 class 0x000300
[ 0.591993] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.591997] pci 0000:01:05.0: reg 14: [io 0xde00-0xdeff]
[ 0.592002] pci 0000:01:05.0: reg 18: [mem 0xfdee0000-0xfdeeffff]
[ 0.592012] pci 0000:01:05.0: reg 24: [mem 0xfdd00000-0xfddfffff]
[ 0.592045] pci 0000:01:05.0: supports D1 D2
[ 0.592054] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
[ 0.592062] pci 0000:01:05.1: reg 10: [mem 0xfdefc000-0xfdefffff]
[ 0.592097] pci 0000:01:05.1: supports D1 D2
[ 0.592129] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.592132] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.592135] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff]
[ 0.592138] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.592173] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
[ 0.592188] pci 0000:02:00.0: reg 10: [mem 0xfdaf8000-0xfdafffff 64bit]
[ 0.592255] pci 0000:02:00.0: supports D1 D2
[ 0.592257] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.592261] pci 0000:02:00.0: PME# disabled
[ 0.600050] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.600054] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.600057] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.600061] pci 0000:00:09.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.600100] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.600113] pci 0000:03:00.0: reg 10: [io 0xee00-0xeeff]
[ 0.600134] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.600147] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.600202] pci 0000:03:00.0: supports D1 D2
[ 0.600203] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.600207] pci 0000:03:00.0: PME# disabled
[ 0.608051] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.608054] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.608057] pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.608061] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.608115] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.608119] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.608122] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.608126] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
[ 0.608128] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.608130] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.608132] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.608135] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.608137] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.608175] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.608179] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.608182] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.608187] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.608225] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 0.608229] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
[ 0.608232] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.608237] pci 0000:00:15.1: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.608256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.608513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.608544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.608580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.608621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.608650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.608682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.608715] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.608717] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.608719] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.618742] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 0.618783] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 0.618822] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 0.618859] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 0.618896] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 0.618933] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 0.618970] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 0.619006] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 0.619087] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.619087] vgaarb: loaded
[ 0.619087] vgaarb: bridge control possible 0000:01:05.0
[ 0.619087] i2c-core: driver [aat2870] using legacy suspend method
[ 0.619087] i2c-core: driver [aat2870] using legacy resume method
[ 0.619087] SCSI subsystem initialized
[ 0.619123] libata version 3.00 loaded.
[ 0.619123] usbcore: registered new interface driver usbfs
[ 0.619123] usbcore: registered new interface driver hub
[ 0.619123] usbcore: registered new device driver usb
[ 0.619123] PCI: Using ACPI for IRQ routing
[ 0.626087] PCI: pci_cache_line_size set to 64 bytes
[ 0.626095] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.626162] reserve RAM buffer: 0000000000094000 - 000000000009ffff
[ 0.626165] reserve RAM buffer: 00000000afdf0000 - 00000000afffffff
[ 0.626167] reserve RAM buffer: 000000022f000000 - 000000022fffffff
[ 0.626246] NetLabel: Initializing
[ 0.626248] NetLabel: domain hash size = 128
[ 0.626249] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.626258] NetLabel: unlabeled traffic allowed by default
[ 0.626275] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.626275] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.628071] Switching to clocksource hpet
[ 0.634102] AppArmor: AppArmor Filesystem Enabled
[ 0.634117] pnp: PnP ACPI init
[ 0.634129] ACPI: bus type pnp registered
[ 0.634207] pnp 00:00: [bus 00-ff]
[ 0.634210] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.634212] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.634213] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.634215] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.634217] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.634219] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 0.634256] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.634265] pnp 00:01: [io 0x0010-0x001f]
[ 0.634267] pnp 00:01: [io 0x0022-0x003f]
[ 0.634269] pnp 00:01: [io 0x0044-0x005f]
[ 0.634270] pnp 00:01: [io 0x0062-0x0063]
[ 0.634272] pnp 00:01: [io 0x0065-0x006f]
[ 0.634273] pnp 00:01: [io 0x0074-0x007f]
[ 0.634275] pnp 00:01: [io 0x0091-0x0093]
[ 0.634276] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.634278] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.634279] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.634281] pnp 00:01: [io 0x0220-0x0225]
[ 0.634282] pnp 00:01: [io 0x0290-0x0294]
[ 0.634326] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.634328] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.634330] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.634333] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.635353] Freeing initrd memory: 20692k freed
[ 0.704333] pnp 00:02: [io 0x4100-0x411f]
[ 0.704336] pnp 00:02: [io 0x0228-0x022f]
[ 0.704337] pnp 00:02: [io 0x040b]
[ 0.704339] pnp 00:02: [io 0x04d6]
[ 0.704341] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.704342] pnp 00:02: [io 0x0c14]
[ 0.704344] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.704345] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.704347] pnp 00:02: [io 0x0c6f]
[ 0.704348] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.704350] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.704351] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.704353] pnp 00:02: [io 0x4000-0x40fe]
[ 0.704354] pnp 00:02: [io 0x4210-0x4217]
[ 0.704356] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.704357] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.704359] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.704361] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.704363] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.704369] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.704447] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.704450] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.704452] system 00:02: [io 0x040b] has been reserved
[ 0.704454] system 00:02: [io 0x04d6] has been reserved
[ 0.704456] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.704458] system 00:02: [io 0x0c14] has been reserved
[ 0.704461] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.704463] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.704465] system 00:02: [io 0x0c6f] has been reserved
[ 0.704467] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.704469] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.704471] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.704473] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.704475] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.704477] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.704480] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.704482] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.704484] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.704488] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.704579] pnp 00:03: [dma 4]
[ 0.704581] pnp 00:03: [io 0x0000-0x000f]
[ 0.704583] pnp 00:03: [io 0x0080-0x0090]
[ 0.704584] pnp 00:03: [io 0x0094-0x009f]
[ 0.704586] pnp 00:03: [io 0x00c0-0x00df]
[ 0.704613] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.704664] pnp 00:04: [irq 0 disabled]
[ 0.704674] pnp 00:04: [irq 8]
[ 0.704676] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.704704] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.704731] pnp 00:05: [io 0x0070-0x0073]
[ 0.704756] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.704764] pnp 00:06: [io 0x0061]
[ 0.704790] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.704797] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.704803] pnp 00:07: [irq 13]
[ 0.704830] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.704972] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.704974] pnp 00:08: [io 0x03f7]
[ 0.704980] pnp 00:08: [irq 6]
[ 0.704981] pnp 00:08: [dma 2]
[ 0.705020] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.705189] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.705195] pnp 00:09: [irq 4]
[ 0.705244] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.705276] pnp 00:0a: [io 0x0060]
[ 0.705278] pnp 00:0a: [io 0x0064]
[ 0.705283] pnp 00:0a: [irq 1]
[ 0.705319] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.705348] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.705396] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.705399] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.705576] pnp 00:0c: [mem 0x000d4400-0x000d7fff]
[ 0.705578] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.705580] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.705581] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.705583] pnp 00:0c: [mem 0xafdf0000-0xafdfffff]
[ 0.705585] pnp 00:0c: [mem 0xffff0000-0xffffffff]
[ 0.705586] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.705588] pnp 00:0c: [mem 0x00100000-0xafdeffff]
[ 0.705590] pnp 00:0c: [mem 0xafe00000-0xafefffff]
[ 0.705591] pnp 00:0c: [mem 0xaff00000-0xafffffff]
[ 0.705593] pnp 00:0c: [mem 0xb0000000-0xcfffffff]
[ 0.705595] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.705596] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.705598] pnp 00:0c: [mem 0xfff80000-0xfffeffff]
[ 0.705601] pnp 00:0c: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.705604] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.705607] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.705610] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.705613] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.705616] pnp 00:0c: disabling [mem 0x00100000-0xafdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.705675] system 00:0c: [mem 0xafdf0000-0xafdfffff] could not be reserved
[ 0.705677] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.705680] system 00:0c: [mem 0xafe00000-0xafefffff] has been reserved
[ 0.705682] system 00:0c: [mem 0xaff00000-0xafffffff] could not be reserved
[ 0.705684] system 00:0c: [mem 0xb0000000-0xcfffffff] has been reserved
[ 0.705686] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.705689] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.705691] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.705693] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.705711] pnp: PnP ACPI: found 13 devices
[ 0.705712] ACPI: ACPI bus type pnp unregistered
[ 0.712409] PCI: max bus depth: 1 pci_try_num: 2
[ 0.712435] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.712437] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.712440] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff]
[ 0.712443] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.712447] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.712449] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.712452] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.712455] pci 0000:00:09.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.712458] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.712461] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.712463] pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.712466] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.712470] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.712472] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.712476] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.712480] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
[ 0.712485] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.712487] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.712491] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.712494] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.712499] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 0.712501] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
[ 0.712505] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.712508] pci 0000:00:15.1: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.712526] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.712529] pci 0000:00:09.0: setting latency timer to 64
[ 0.712539] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.712541] pci 0000:00:0a.0: setting latency timer to 64
[ 0.712550] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.712553] pci 0000:00:15.0: setting latency timer to 64
[ 0.712558] pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.712561] pci 0000:00:15.1: setting latency timer to 64
[ 0.712564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.712566] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.712568] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.712570] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.712572] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.712574] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.712576] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfdefffff]
[ 0.712578] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.712580] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.712582] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.712584] pci_bus 0000:02: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.712586] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.712588] pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfd4fffff]
[ 0.712590] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.712592] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.712594] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.712596] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
[ 0.712598] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.712599] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.712601] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.712603] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.712605] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.712607] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.712609] pci_bus 0000:05: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.712611] pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.712613] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 0.712614] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.712616] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.712645] NET: Registered protocol family 2
[ 0.712826] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.713813] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.715641] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.715858] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.715860] TCP reno registered
[ 0.715871] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.715911] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.716020] NET: Registered protocol family 1
[ 0.716029] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.716046] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.788027] pci 0000:00:12.0: PCI INT A disabled
[ 0.788035] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.788064] pci 0000:00:12.2: PCI INT B disabled
[ 0.788070] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.860024] pci 0000:00:13.0: PCI INT A disabled
[ 0.860032] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.860060] pci 0000:00:13.2: PCI INT B disabled
[ 0.860073] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.932024] pci 0000:00:14.5: PCI INT C disabled
[ 0.932034] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.004024] pci 0000:00:16.0: PCI INT A disabled
[ 1.004032] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.004060] pci 0000:00:16.2: PCI INT B disabled
[ 1.004076] pci 0000:01:05.0: Boot video device
[ 1.004084] pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.004111] pci 0000:02:00.0: PCI INT A disabled
[ 1.004116] PCI: CLS 4 bytes, default 64
[ 1.004437] PCI-DMA: Disabling AGP.
[ 1.004513] PCI-DMA: aperture base @ a4000000 size 65536 KB
[ 1.004514] PCI-DMA: using GART IOMMU.
[ 1.004517] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.008704] perf: AMD IBS detected (0x000000ff)
[ 1.008881] audit: initializing netlink socket (disabled)
[ 1.008890] type=2000 audit(1384160925.004:1): initialized
[ 1.025470] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.027621] VFS: Disk quotas dquot_6.5.2
[ 1.027664] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.028110] fuse init (API version 7.17)
[ 1.028185] msgmni has been set to 14922
[ 1.028561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.028593] io scheduler noop registered
[ 1.028595] io scheduler deadline registered
[ 1.028621] io scheduler cfq registered (default)
[ 1.028712] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.028739] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 1.028775] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.028797] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 1.028913] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.028928] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.029027] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.029031] ACPI: Power Button [PWRB]
[ 1.029071] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.029074] ACPI: Power Button [PWRF]
[ 1.192803] ERST: Table is not found!
[ 1.192805] GHES: HEST is not enabled!
[ 1.213232] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.235596] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.235872] Linux agpgart interface v0.103
[ 1.237104] brd: module loaded
[ 1.237759] loop: module loaded
[ 1.237860] ahci 0000:00:11.0: version 3.0
[ 1.237875] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.237979] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.237982] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.238606] scsi0 : ahci
[ 1.238679] scsi1 : ahci
[ 1.238743] scsi2 : ahci
[ 1.238808] scsi3 : ahci
[ 1.238870] scsi4 : ahci
[ 1.238934] scsi5 : ahci
[ 1.239060] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 19
[ 1.239062] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 19
[ 1.239065] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 19
[ 1.239068] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 19
[ 1.239071] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 19
[ 1.239073] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 19
[ 1.239402] Fixed MDIO Bus: probed
[ 1.239417] tun: Universal TUN/TAP device driver, 1.6
[ 1.239419] tun: (C) 1999-2004 Max Krasnyansky
[ 1.239464] PPP generic driver version 2.4.2
[ 1.239543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.239555] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.239566] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.239603] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.239610] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.239623] QUIRK: Enable AMD PLL fix
[ 1.239632] ehci_hcd 0000:00:12.2: debug port 1
[ 1.239651] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
[ 1.248026] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.248139] hub 1-0:1.0: USB hub found
[ 1.248148] hub 1-0:1.0: 5 ports detected
[ 1.248208] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.248220] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.248256] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.248263] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.248279] ehci_hcd 0000:00:13.2: debug port 1
[ 1.248289] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
[ 1.260026] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.260120] hub 2-0:1.0: USB hub found
[ 1.260123] hub 2-0:1.0: 5 ports detected
[ 1.260183] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.260195] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.260230] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.260235] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.260252] ehci_hcd 0000:00:16.2: debug port 1
[ 1.260261] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
[ 1.272026] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.272130] hub 3-0:1.0: USB hub found
[ 1.272134] hub 3-0:1.0: 4 ports detected
[ 1.272192] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.272202] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.272214] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.272256] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.272280] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
[ 1.332105] hub 4-0:1.0: USB hub found
[ 1.332110] hub 4-0:1.0: 5 ports detected
[ 1.332171] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.332183] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.332222] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.332234] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
[ 1.392106] hub 5-0:1.0: USB hub found
[ 1.392112] hub 5-0:1.0: 5 ports detected
[ 1.392173] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.392185] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.392226] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.392240] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
[ 1.452133] hub 6-0:1.0: USB hub found
[ 1.452139] hub 6-0:1.0: 2 ports detected
[ 1.452196] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.452209] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.452249] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.452263] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
[ 1.512131] hub 7-0:1.0: USB hub found
[ 1.512137] hub 7-0:1.0: 4 ports detected
[ 1.512198] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.512226] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.512242] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 1.512245] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.512285] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 1.512391] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.512488] xHCI xhci_add_endpoint called for root hub
[ 1.512490] xHCI xhci_check_bandwidth called for root hub
[ 1.512510] hub 8-0:1.0: USB hub found
[ 1.512515] hub 8-0:1.0: 2 ports detected
[ 1.512559] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.512594] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 1.512664] xHCI xhci_add_endpoint called for root hub
[ 1.512666] xHCI xhci_check_bandwidth called for root hub
[ 1.512684] hub 9-0:1.0: USB hub found
[ 1.512690] hub 9-0:1.0: 2 ports detected
[ 1.560033] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 1.568092] usbcore: registered new interface driver libusual
[ 1.568121] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.568123] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.568245] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.568324] mousedev: PS/2 mouse device common for all mice
[ 1.568437] rtc_cmos 00:05: RTC can wake from S4
[ 1.568513] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.568538] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.568601] device-mapper: uevent: version 1.0.3
[ 1.568655] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.568661] cpuidle: using governor ladder
[ 1.568662] cpuidle: using governor menu
[ 1.568664] EFI Variables Facility v0.08 2004-May-17
[ 1.568843] TCP cubic registered
[ 1.568922] NET: Registered protocol family 10
[ 1.569324] NET: Registered protocol family 17
[ 1.569328] Registering the dns_resolver key type
[ 1.569427] PM: Hibernation image not present or could not be loaded.
[ 1.569439] registered taskstats version 1
[ 1.574883] Magic number: 5:873:120
[ 1.574887] misc device-mapper: hash matches
[ 1.574943] rtc_cmos 00:05: setting system clock to 2013-11-11 09:08:47 UTC (1384160927)
[ 1.574957] powernow-k8: Found 1 AMD FX(tm)-4100 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[ 1.574972] powernow-k8: Core Performance Boosting: on.
[ 1.574977] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 1.574978] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 1.574988] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.574990] EDD information not available.
[ 1.593116] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.693881] hub 1-2:1.0: USB hub found
[ 1.694234] hub 1-2:1.0: 4 ports detected
[ 1.728041] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.728063] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.728081] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.728100] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.728120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.728137] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.728640] ata4.00: ATA-8: ST2000DM001-9YN164, CC4H, max UDMA/133
[ 1.728643] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.728657] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
[ 1.728767] ata1.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 1.728769] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.728851] ata2.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 1.728852] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.728860] ata3.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 1.728863] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.729203] ata4.00: configured for UDMA/133
[ 1.729493] ata1.00: configured for UDMA/133
[ 1.729536] ata6.00: configured for UDMA/100
[ 1.729607] scsi 0:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 1.729628] ata2.00: configured for UDMA/133
[ 1.729655] ata3.00: configured for UDMA/133
[ 1.729730] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.729734] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.729818] sd 0:0:0:0: [sda] Write Protect is off
[ 1.729821] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.729852] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.729872] scsi 1:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 1.729977] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.730012] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.730026] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.730028] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.730080] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.730120] scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 1.730229] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.730253] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.730284] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.730287] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.730340] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.730352] scsi 3:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4H PQ: 0 ANSI: 5
[ 1.730454] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.730457] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 1.730478] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.730503] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.730506] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.730532] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.739872] ata5.00: ATA-8: Corsair Force 3 SSD, 5.05, max UDMA/133
[ 1.739875] ata5.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.743193] sdb: sdb2
[ 1.743436] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.748149] sdd: sdd1
[ 1.748369] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.749762] ata5.00: configured for UDMA/133
[ 1.749841] scsi 4:0:0:0: Direct-Access ATA Corsair Force 3 5.05 PQ: 0 ANSI: 5
[ 1.749940] sd 4:0:0:0: [sde] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.749958] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.750037] sd 4:0:0:0: [sde] Write Protect is off
[ 1.750039] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.750071] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.750541] sde: sde1 sde2 sde3
[ 1.750574] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5
[ 1.750865] sd 4:0:0:0: [sde] Attached SCSI disk
[ 1.751780] sdc: sdc2
[ 1.752024] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.752864] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.752867] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.752972] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.753026] sr 5:0:0:0: Attached scsi generic sg5 type 5
[ 1.793013] sda: sda4
[ 1.793267] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.795431] Freeing unused kernel memory: 924k freed
[ 1.795609] Write protecting the kernel read-only data: 12288k
[ 1.801796] Freeing unused kernel memory: 1588k freed
[ 1.804031] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[ 1.806763] Freeing unused kernel memory: 1188k freed
[ 1.821307] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 1.821536] zram: num_devices not specified. Using default: 1
[ 1.821538] zram: Creating 1 devices ...
[ 1.824511] udevd[115]: starting version 175
[ 1.856138] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.856158] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.856193] r8169 0000:03:00.0: setting latency timer to 64
[ 1.856254] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.856747] r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c72000, 50:e5:49:37:a5:4f, XID 0c900800 IRQ 43
[ 1.856751] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.863756] Floppy drive(s): fd0 is unknown type 13 (usb?)
[ 1.864146] wmi: Mapper loaded
[ 1.878102] FDC 0 is a post-1991 82077
[ 1.879281] Adding 3821888k swap on /dev/zram0. Priority:100 extents:1 across:3821888k SS
[ 1.923045] md: bind
[ 1.935505] md: bind
[ 1.940436] md: bind
[ 1.948600] Initializing USB Mass Storage driver...
[ 1.948742] scsi6 : usb-storage 3-1:1.0
[ 1.948800] usbcore: registered new interface driver usb-storage
[ 1.948802] USB Mass Storage support registered.
[ 1.951613] md: bind
[ 1.971424] async_tx: api initialized (async)
[ 2.008030] Refined TSC clocksource calibration: 3816.880 MHz.
[ 2.008035] Switching to clocksource tsc
[ 2.036036] raid6: int64x1 1593 MB/s
[ 2.104030] raid6: int64x2 2554 MB/s
[ 2.172040] raid6: int64x4 2326 MB/s
[ 2.240044] raid6: int64x8 2128 MB/s
[ 2.308020] raid6: sse2x1 5041 MB/s
[ 2.376020] raid6: sse2x2 7683 MB/s
[ 2.444020] raid6: sse2x4 8241 MB/s
[ 2.444022] raid6: using algorithm sse2x4 (8241 MB/s)
[ 2.444045] usb 8-1: new low-speed USB device number 2 using xhci_hcd
[ 2.444387] xor: automatically using best checksumming function: generic_sse
[ 2.445814] usb 8-1: Device not responding to set address.
[ 2.464009] generic_sse: 10649.000 MB/sec
[ 2.464011] xor: using function: generic_sse (10649.000 MB/sec)
[ 2.464619] md: raid6 personality registered for level 6
[ 2.464622] md: raid5 personality registered for level 5
[ 2.464623] md: raid4 personality registered for level 4
[ 2.464717] bio: create slab at 1
[ 2.464729] md/raid:md0: device sdc2 operational as raid disk 3
[ 2.464731] md/raid:md0: device sdb2 operational as raid disk 2
[ 2.464733] md/raid:md0: device sdd1 operational as raid disk 1
[ 2.464734] md/raid:md0: device sda4 operational as raid disk 0
[ 2.465022] md/raid:md0: allocated 4280kB
[ 2.465049] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 2.465051] RAID conf printout:
[ 2.465053] --- level:5 rd:4 wd:4
[ 2.465054] disk 0, o:1, dev:sda4
[ 2.465056] disk 1, o:1, dev:sdd1
[ 2.465057] disk 2, o:1, dev:sdb2
[ 2.465058] disk 3, o:1, dev:sdc2
[ 2.465078] md0: detected capacity change from 0 to 5940288946176
[ 2.480295] md0: unknown partition table
[ 2.649818] usb 8-1: Device not responding to set address.
[ 2.856025] usb 8-1: device not accepting address 2, error -71
[ 2.948689] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.949186] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.949691] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.950184] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.950630] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 2.950807] sd 6:0:0:1: Attached scsi generic sg7 type 0
[ 2.951063] sd 6:0:0:2: Attached scsi generic sg8 type 0
[ 2.951271] sd 6:0:0:3: Attached scsi generic sg9 type 0
[ 2.965183] sd 6:0:0:0: [sdf] Attached SCSI removable disk
[ 2.966432] sd 6:0:0:1: [sdg] Attached SCSI removable disk
[ 2.969062] sd 6:0:0:3: [sdi] Attached SCSI removable disk
[ 2.970432] sd 6:0:0:2: [sdh] Attached SCSI removable disk
[ 2.972020] usb 8-1: new low-speed USB device number 3 using xhci_hcd
[ 2.974741] usb 8-1: Device not responding to set address.
[ 3.178733] usb 8-1: Device not responding to set address.
[ 3.380009] usb 8-1: device not accepting address 3, error -71
[ 3.492015] usb 8-1: new low-speed USB device number 4 using xhci_hcd
[ 3.494721] usb 8-1: Device not responding to set address.
[ 3.697768] usb 8-1: Device not responding to set address.
[ 3.789844] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 3.789847] vesafb: scrolling: redraw
[ 3.789849] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 3.796818] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90012780000, using 5824k, total 5824k
[ 3.796940] Console: switching to colour frame buffer device 175x65
[ 3.796965] fb0: VESA VGA frame buffer device
[ 3.900016] usb 8-1: device not accepting address 4, error -71
[ 3.968463] Btrfs loaded
[ 3.973074] device-mapper: dm-raid45: initialized v0.2594b
[ 3.974294] md: linear personality registered for level -1
[ 3.975569] md: multipath personality registered for level -4
[ 3.976797] md: raid0 personality registered for level 0
[ 3.978120] md: raid1 personality registered for level 1
[ 3.983265] md: raid10 personality registered for level 10
[ 4.016039] usb 8-1: new low-speed USB device number 5 using xhci_hcd
[ 4.017756] usb 8-1: Device not responding to set address.
[ 4.222691] usb 8-1: Device not responding to set address.
[ 4.428015] usb 8-1: device not accepting address 5, error -71
[ 4.428035] hub 8-0:1.0: unable to enumerate USB device on port 1
[ 4.540018] usb 8-2: new low-speed USB device number 6 using xhci_hcd
[ 4.588765] usb 8-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.612852] input: Wireless Mouse Wireless Mouse as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb8/8-2/8-2:1.0/input/input3
[ 4.612967] generic-usb 0003:05FE:0011.0001: input,hidraw0: USB HID v1.10 Mouse [Wireless Mouse Wireless Mouse] on usb-0000:02:00.0-2/input0
[ 4.612987] usbcore: registered new interface driver usbhid
[ 4.612990] usbhid: USB HID core driver
[ 4.668974] usb 1-2.3: new high-speed USB device number 3 using ehci_hcd
[ 27.747427] end_request: I/O error, dev fd0, sector 0
[ 28.203174] EXT4-fs (sde1): INFO: recovery required on readonly filesystem
[ 28.203177] EXT4-fs (sde1): write access will be enabled during recovery
[ 28.229099] EXT4-fs (sde1): recovery complete
[ 28.229177] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 30.398359] Adding 524284k swap on /dev/sde2. Priority:-1 extents:1 across:524284k SS
[ 30.623054] EXT4-fs (sde1): re-mounted. Opts: errors=remount-ro,discard
[ 30.647563] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: discard
[ 31.159794] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 31.404014] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.414733] udevd[727]: starting version 175
[ 31.437112] lp: driver loaded but no devices found
[ 31.449350] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.469698] ppdev: user-space parallel port driver
[ 31.491941] type=1400 audit(1384160957.410:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=826 comm="apparmor_parser"
[ 31.492531] type=1400 audit(1384160957.414:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=826 comm="apparmor_parser"
[ 31.531908] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 31.531913] Disabling lock debugging due to kernel taint
[ 31.547806] Linux video capture interface: v2.00
[ 31.548497] gspca_main: v2.14.0 registered
[ 31.549602] gspca_main: sn9c20x-2.14.0 probing 0c45:624e
[ 31.562376] type=1400 audit(1384160957.482:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=897 comm="apparmor_parser"
[ 31.562834] type=1400 audit(1384160957.482:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=897 comm="apparmor_parser"
[ 31.562980] type=1400 audit(1384160957.482:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=897 comm="apparmor_parser"
[ 31.565109] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 31.566382] MCE: In-kernel MCE decoding enabled.
[ 31.568926] EDAC MC: Ver: 2.1.0
[ 31.570220] [fglrx] Maximum main memory to use for locked dma buffers: 7240 MBytes.
[ 31.570328] [fglrx] vendor: 1002 device: 9715 count: 1
[ 31.571105] [fglrx] ioport: bar 1, base 0xde00, size: 0x100
[ 31.571117] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 31.571122] pci 0000:01:05.0: setting latency timer to 64
[ 31.573198] AMD64 EDAC driver v3.4.0
[ 31.577402] [fglrx] Kernel PAT support is enabled
[ 31.577422] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 31.578237] device-mapper: multipath: version 1.3.1 loaded
[ 31.602337] gspca_sn9c20x: SOI968 sensor detected
[ 31.602393] input: sn9c20x as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/input/input4
[ 31.602512] usbcore: registered new interface driver sn9c20x
[ 31.614940] hda_codec: ALC889: BIOS auto-probing.
[ 31.625201] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 31.625762] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 31.625831] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 31.625897] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 31.625968] input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 31.626034] input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 31.626115] input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 31.626189] input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 31.626498] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 31.626501] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 31.626928] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 31.627105] EDAC amd64: DRAM ECC disabled.
[ 31.627112] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 31.627114] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 31.627115] (Note that use of the override may cause unknown side effects.)
[ 31.627179] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 31.628042] snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 31.628085] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 31.662230] Buffer I/O error on device zram0, logical block 955472
[ 31.662235] Buffer I/O error on device zram0, logical block 955472
[ 31.662277] Buffer I/O error on device zram0, logical block 955472
[ 31.662282] Buffer I/O error on device zram0, logical block 955472
[ 31.662286] Buffer I/O error on device zram0, logical block 955472
[ 31.697284] init: failsafe main process (1085) killed by TERM signal
[ 31.925157] r8169 0000:03:00.0: eth0: link down
[ 31.925164] r8169 0000:03:00.0: eth0: link down
[ 31.925907] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.926260] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.108187] [fglrx] Could not enable MSI; System prevented initialization
[ 32.112962] [fglrx] Firegl kernel thread PID: 1633
[ 32.113053] [fglrx] Firegl kernel thread PID: 1662
[ 32.113128] [fglrx] Firegl kernel thread PID: 1663
[ 32.113242] [fglrx] IRQ 18 Enabled
[ 32.656332] [fglrx] Gart USWC size:1279 M.
[ 32.656335] [fglrx] Gart cacheable size:508 M.
[ 32.656339] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 32.656341] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 32.656343] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 34.651193] r8169 0000:03:00.0: eth0: link up
[ 34.652057] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 47.569317] init: plymouth-stop pre-start process (3251) terminated with status 1