dmesg - opne2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
BIOS-e820: 0000000040005000 - 0000000065884000 (usable)
BIOS-e820: 0000000065884000 - 0000000065a86000 (reserved)
BIOS-e820: 0000000065a86000 - 0000000075a89000 (usable)
BIOS-e820: 0000000075a89000 - 0000000079eef000 (reserved)
BIOS-e820: 0000000079eef000 - 0000000079f9f000 (ACPI NVS)
BIOS-e820: 0000000079f9f000 - 0000000079fff000 (ACPI data)
BIOS-e820: 0000000079fff000 - 000000007a000000 (usable)
BIOS-e820: 000000007a000000 - 000000007ea00000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffd90000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000100600000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: COMPAQ PRESARIOCQ18/PRESARIOCQ18, BIOS 71f 07/05/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x100600 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 07C000000 mask FFC000000 uncachable
3 base 07A000000 mask FFE000000 uncachable
4 base 100000000 mask FFF800000 write-back
5 base 100600000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00f0100] f0100
initial memory mapped : 0 - 01a00000
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: 0000000000000000-00000000379fe000
0000000000 - 0000200000 page 4k
0000200000 - 0037800000 page 2M
0037800000 - 00379fe000 page 4k
kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
RAMDISK: 36c92000 - 37641000
ACPI: RSDP 000f0120 00024 (v02 MSTEST)
ACPI: XSDT 79ffe170 0009C (v01 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: FACP 79fec000 0010C (v05 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
ACPI: DSDT 79fef000 0B0C9 (v02 MSTEST IVB-CPT 00000000 INTL 20061109)
ACPI: FACS 79f7d000 00040
ACPI: SLIC 79ffd000 00176 (v01 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: SSDT 79ffb000 01068 (v01 MSTEST PtidDevc 00001000 INTL 20061109)
ACPI: ASF! 79fee000 000A5 (v32 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: HPET 79feb000 00038 (v01 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: APIC 79fea000 00098 (v03 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: MCFG 79fe9000 0003C (v01 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: FPDT 79fe8000 00064 (v01 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: SSDT 79fe7000 00860 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 79fe6000 00B22 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 79fe5000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: POAT 79f7b000 00055 (v03 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: UEFI 79fe4000 0003E (v01 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: UEFI 79fe3000 0026A (v01 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: DBG2 79fe2000 000CD (v00 MSTEST TESTONLY 00000002 PTL 00000002)
ACPI: Local APIC address 0xfee00000
3212MB HIGHMEM available.
889MB LOWMEM available.
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000379fe
HighMem 0x000379fe -> 0x00100600
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x00020000
0: 0x00020200 -> 0x00040004
0: 0x00040005 -> 0x00065884
0: 0x00065a86 -> 0x00075a89
0: 0x00079fff -> 0x0007a000
0: 0x00100000 -> 0x00100600
On node 0 totalpages: 482324
free_area_init_node: node 0, pgdat c1412740, node_mem_map f4c82200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1748 pages used for memmap
Normal zone: 221482 pages, LIFO batch:31
HighMem zone: 6425 pages used for memmap
HighMem zone: 248688 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
Allocating PCI resources starting at 7ea00000 (gap: 7ea00000:79600000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f797b000 s33280 r0 d24064 u57344
pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 474119
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Initializing HighMem for node 0 (000379fe:00100600)
Memory: 1879988k/4200448k available (2852k kernel code, 49308k reserved, 1347k data, 416k init, 1020452k highmem)
virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc141b000 - 0xc1483000 ( 416 kB)
.data : 0xc12c93c0 - 0xc141a100 (1347 kB)
.text : 0xc1000000 - 0xc12c93c0 (2852 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f4806000 soft=f4808000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1795.821 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.64 BogoMIPS (lpj=7183284)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz stepping 09
Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f4932000 soft=f4934000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7183.33 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 79eef000 (720896 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 79e8d818 00790 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00790 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 79e8ea98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 79e8cd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 0
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x7ea00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 0 class 0x000600
pci 0000:00:02.0: [8086:0156] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0x90705000-0x9070500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0x9070a000-0x9070a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0x90700000-0x90703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0x90709000-0x907093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e5f] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1e03] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 24: [mem 0x90708000-0x907087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0x90704000-0x907040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10ec:8176] type 0 class 0x000280
pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 18: [mem 0x90600000-0x90603fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 18: [mem 0x90500000-0x90500fff 64bit]
pci 0000:02:00.0: reg 20: [mem 0x90400000-0x90403fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0x90500000-0x905fffff]
pci 0000:00:1c.1: bridge window [mem 0x90400000-0x904fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
_OSC request data:1 1f 0
pci0000:00: Requesting ACPI _OSC control (0x1d)
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d000 - 000000000009ffff
reserve RAM buffer: 0000000040004000 - 0000000043ffffff
reserve RAM buffer: 0000000065884000 - 0000000067ffffff
reserve RAM buffer: 0000000075a89000 - 0000000077ffffff
reserve RAM buffer: 000000007a000000 - 000000007bffffff
reserve RAM buffer: 0000000100600000 - 0000000103ffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x7ea00000-0xfeafffff window]
pnp 00:00: [mem 0x00010000-0x0001ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x1000-0x100f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs ETD041e PNP0f13 (active)
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfed10000-0xfed17fff]
pnp 00:0a: [mem 0xfed18000-0xfed18fff]
pnp 00:0a: [mem 0xfed19000-0xfed19fff]
pnp 00:0a: [mem 0xf8000000-0xfbffffff]
pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
pnp 00:0a: [mem 0xfed90000-0xfed93fff]
pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: [mem 0xfee00000-0xfeefffff]
pnp 00:0a: [mem 0xfffff000-0xffffffff]
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xfffff000-0xffffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0x90500000-0x905fffff]
pci 0000:00:1c.1: bridge window [mem 0x90400000-0x904fffff 64bit pref]
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x7ea00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]
pci_bus 0000:02: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 9916k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1384185933.796:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1698
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2013-11-11 16:05:34 UTC (1384185934)
Initializing network drop monitor service
Freeing unused kernel memory: 416k freed
Write protecting the kernel text: 2856k
Write protecting the kernel read-only data: 1084k
NX-protecting the kernel data: 3288k
udevd[48]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 40 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xf821a000, 00:e0:4d:68:55:f6, XID 0c900800 IRQ 40
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
libata version 3.00 loaded.
ehci_hcd 0000:00:1a.0: irq 16, io mem 0x9070a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ACPI: Invalid active0 threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ehci_hcd 0000:00:1d.0: irq 23, io mem 0x90709000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0x90708000 port 0x90708100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
Refined TSC clocksource calibration: 1795.919 MHz.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Switching to clocksource tsc
ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA60W, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 ES2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-1: new high-speed USB device number 2 using ehci_hcd
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-1.3: new high-speed USB device number 3 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=090c, idProduct=37c0
usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.3: Product: USB Video Device
PM: Starting manual resume from disk
PM: Hibernation image partition 8:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
EXT4-fs (sda3): orphan cleanup on readonly fs
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 18350105
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 787051
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 787157
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 18350112
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 18350111
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 786499
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 786503
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 3014710
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 787040
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 786895
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 2637506
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4587977
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4587978
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4587979
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4587976
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4587971
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4587972
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4587980
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4587975
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 3025091
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 9568774
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 9568619
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4590598
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4593367
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4592551
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4590666
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4592491
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4590665
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4591735
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 4592497
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 787037
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 786836
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 786945
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 786841
EXT4-fs (sda3): 34 orphan inodes deleted
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udevd[353]: starting version 175
input: PC Speaker as /devices/platform/pcspkr/input/input1
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
iTCO_vendor_support: vendor-support=0
ACPI: Requesting acpi_cpufreq
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: resource 0000:00:1f.3 [io 0xefa0-0xefbf] conflicts with ACPI region SMBI [io 0xefa0-0xefaf]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
cfg80211: Calling CRDA to update world regulatory domain
input: Topstar Laptop extra buttons as /devices/virtual/input/input6
topstar_laptop: ACPI extras driver loaded
[drm] Initialized drm 1.1.0 20060810
rtl8192ce 0000:01:00.0: setting latency timer to 64
rtl8192ce:_rtl92ce_read_chip_version(): Chip Version ID: Unknown. Bug?
****** This B_CUT device may not work with kernels 3.6 and earlier
snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
psmouse serio2: elantech: assuming hardware version 3 (with firmware version 0x450f00)
psmouse serio2: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
rtl8192ce 0000:01:00.0: firmware: agent loaded rtlwifi/rtl8192cfwU_B.bin into memory
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
psmouse serio2: elantech: retrying ps2 command 0xf8 (2).
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: EC
cfg80211: Regulatory domain changed to country: EC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
Linux media interface: v0.10
Linux video capture interface: v2.00
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
uvcvideo: Found UVC 1.00 device USB Video Device (090c:37c0)
input: USB Video Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
psmouse serio2: elantech: retrying ps2 command 0xf8 (1).
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:43: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
psmouse serio2: elantech: retrying ps2 command 0xf8 (0).
psmouse serio2: elantech: ps2 command 0xf8 failed.
psmouse serio2: elantech: failed to write register 0x10 with value 0x0b.
psmouse serio2: elantech: failed to initialise registers.
psmouse serio2: elantech: failed to put touchpad into absolute mode.
input: PS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input13
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
Adding 7812092k swap on /dev/sda2. Priority:-1 extents:1 across:7812092k
EXT4-fs (sda3): re-mounted. Opts: (null)
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
loop: module loaded
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:02:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX AssocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
r8169 0000:02:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
eth0: no IPv6 routers present
wlan0: no IPv6 routers present
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
usb 2-1.2: New USB device found, idVendor=093b, idProduct=004e
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: DVDR PX-650US USB Device
usb 2-1.2: Manufacturer: Plextor
usb 2-1.2: SerialNumber: 201050125522
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1.2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 4:0:0:0: CD-ROM PLEXTOR DVDR PX-650US 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
usb 2-1.2: USB disconnect, device number 4
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from f0:7d:68:de:47:06 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with f0:7d:68:de:47:06 (try 1)
wlan0: authenticated
wlan0: associate with f0:7d:68:de:47:06 (try 1)
wlan0: RX ReassocResp from f0:7d:68:de:47:06 (capab=0x431 status=0 aid=1)
wlan0: associated