dmesg - x264-test-1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-13-generic (buildd@aatxe) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 (Ubuntu 3.11.0-13.20-generic 3.11.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
Atom PSE erratum detected, BIOS microcode update recommended
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003f67ffff] usable
BIOS-e820: [mem 0x000000003f680000-0x000000003f6fffff] ACPI NVS
BIOS-e820: [mem 0x000000003f700000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: LG Electronics X120-L.C7LCHS/Xenia2 , BIOS PUMASF0B 05/18/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3f680 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 disabled
2 disabled
3 base 03F700000 mask 0FFF00000 uncachable
4 base 03F800000 mask 0FF800000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 3, base: 1015MB, range: 1MB, type UC
reg 4, base: 1016MB, range: 8MB, type UC
total RAM covered: 1015M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
found SMP MP-table at [mem 0x000f7c30-0x000f7c3f] mapped at [c00f7c30]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 4k
BRK [0x01b39000, 0x01b39fff] PGTABLE
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 4k
BRK [0x01b3a000, 0x01b3afff] PGTABLE
BRK [0x01b3b000, 0x01b3bfff] PGTABLE
BRK [0x01b3c000, 0x01b3cfff] PGTABLE
BRK [0x01b3d000, 0x01b3dfff] PGTABLE
BRK [0x01b3e000, 0x01b3efff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x33ffffff] page 4k
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
RAMDISK: [mem 0x35106000-0x3687afff]
ACPI: RSDP 000f7c00 00024 (v02 PTLTD )
ACPI: XSDT 3f6833d4 00084 (v01 LGE LGPC 06040000 LTP 00000000)
ACPI: FACP 3f68dc60 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
ACPI: DSDT 3f684e9d 08D4F (v01 LGE PUMA 06040000 INTL 20050309)
ACPI: FACS 3f68efc0 00040
ACPI: APIC 3f68dd54 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: HPET 3f68ddbc 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: MCFG 3f68ddf4 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: TCPA 3f68de30 00032 (v01 LGE COLUMBIA 06040000 PTL 00000001)
ACPI: SLIC 3f68de62 00176 (v01 LGE LGPC 06040000 YSB 00000001)
ACPI: BOOT 3f68dfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 3f684c93 0020A (v01 SataRe SataAhci 00001000 INTL 20050624)
ACPI: SSDT 3f684630 00663 (v01 LGE RKY_IGFX 00001000 INTL 20050624)
ACPI: SSDT 3f6839f4 0025F (v02 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 3f68394e 000A6 (v02 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 3f683458 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
122MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3f67ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x3f67ffff]
On node 0 totalpages: 259614
free_area_init_node: node 0, pgdat c1948b40, node_mem_map f7068020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 246 pages used for memmap
HighMem zone: 31362 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
e820: [mem 0x40000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bdb000 s36288 r0 d21056 u57344
pcpu-alloc: s36288 r0 d21056 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257830
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 2077688 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0003f680)
Memory: 990064K/1038456K available (6352K kernel code, 607K rwdata, 2640K rodata, 880K init, 908K bss, 48392K reserved, 125448K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1962000 - 0xc1a3e000 ( 880 kB)
.data : 0xc16343a4 - 0xc1961dc0 (3254 kB)
.text : 0xc1000000 - 0xc16343a4 (6352 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1600.052 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.10 BogoMIPS (lpj=6400208)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Atom PSE erratum detected, BIOS microcode update recommended
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (c1a3e000 - c1a45000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27140 entries in 54 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f4cf0000 soft=f4cf2000
smpboot: Booting Node 0, Processors #1 OK
Initializing CPU#1
Atom PSE erratum detected, BIOS microcode update recommended
Disabled fast string operations
Brought up 2 CPUs
smpboot: Total of 2 processors activated (6400.20 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x3f680000-0x3f6fffff] (524288 bytes)
regulator-dummy: no parameters
RTC time: 1:52:01, date: 11/07/13
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: BIOS BUG #81[00000000] found
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 3f684317 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 3f683c53 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 3f68455c 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 3f684292 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [CTHT] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf4000000-0xf407ffff]
pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xf4100000-0xf413ffff]
pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xf4080000-0xf40fffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf4340000-0xf4343fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf4344000-0xf43443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 00e0 (mask 000f)
pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x18a8-0x18af]
pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f]
pci 0000:00:1f.2: reg 0x18: [io 0x18a0-0x18a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b]
pci 0000:00:1f.2: reg 0x20: [io 0x1810-0x181f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf4344400-0xf43447ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x18c0-0x18df]
pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf8000000-0xf8000fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xf6000000-0xf600ffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf9ffffff 64bit pref]
pci 0000:03:00.0: [10ec:8199] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x14: [mem 0xf2000000-0xf2003fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x3f680000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x0800-0x080f] has been reserved
system 00:05: [io 0x1000-0x107f] could not be reserved
system 00:05: [io 0x1180-0x11bf] has been reserved
system 00:05: [io 0x1640-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x06a0-0x06af] has been reserved
system 00:06: [io 0x06b0-0x06ff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs SYN1302 PNP0f13 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
pci 0000:02:00.0: BAR 6: assigned [mem 0xf6020000-0xf603ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x40000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:02: resource 2 [mem 0xf6000000-0xf9ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf3ffffff]
pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: resource 10 [mem 0x40000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 24020K (f5106000 - f687b000)
Simple Boot Flag at 0x38 set to 0x1
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1383789121.388:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1735
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x20220
intel_idle: v0.4 model 0x1C
intel_idle: lapic_timer_reliable_states 0x2
tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (64 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ1] (47 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ2] (40 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
ACPI: Battery Slot [CMB0] (battery present)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf4344000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-13-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 121c3931998f688796d5ac98c50cd636878ded2d'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 5:996:861
rtc_cmos 00:07: setting system clock to 2013-11-07 01:52:02 UTC (1383789122)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-1: new high-speed USB device number 2 using ehci-pci
isapnp: No Plug & Play device found
Freeing unused kernel memory: 880K (c1962000 - c1a3e000)
Write protecting the kernel text: 6356k
Write protecting the kernel read-only data: 2644k
NX-protecting the kernel data: 5932k
systemd-udevd[96]: starting version 204
video: module verification failed: signature and/or required key missing - tainting kernel
acpi device:06: registered as cooling_device3
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
usb 1-1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Mass Storage Device
usb 1-1: Manufacturer: JetFlash
usb 1-1: SerialNumber: EE2EUGFX
wmi: Mapper loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
microcode: CPU0 updated to revision 0x218, date = 2009-04-10
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 43 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8102e at 0xf841e000, 00:e0:91:3c:1a:12, XID 04c00000 IRQ 43
microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
microcode: CPU1 updated to revision 0x218, date = 2009-04-10
scsi3 : ahci
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ata1: SATA max UDMA/133 abar m1024@0xf4344400 port 0xf4344500 irq 42
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0xf4344400 port 0xf4344600 irq 42
ata4: DUMMY
[drm] Memory usable by graphics device = 256M
i915 0000:00:02.0: setting latency timer to 64
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
usb 1-3: new high-speed USB device number 4 using ehci-pci
usb 1-3: New USB device found, idVendor=0cf3, idProduct=9271
usb 1-3: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-3: Product: USB2.0 WLAN
usb 1-3: Manufacturer: ATHEROS
usb 1-3: SerialNumber: 12345
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: ST9320310AS, 0001TSM1, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
usb 1-5: new high-speed USB device number 5 using ehci-pci
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9320310AS 0001 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
fbcon: inteldrmfb (fb0) is primary device
usb 1-5: New USB device found, idVendor=05c8, idProduct=0303
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: FS13FF-183
usb 1-5: Manufacturer: Vimicro Corp.
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi4 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
Console: switching to colour frame buffer device 128x36
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 2-2: new full-speed USB device number 2 using uhci_hcd
usb 2-2: New USB device found, idVendor=046d, idProduct=c52b
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Receiver
usb 2-2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 5-1: new full-speed USB device number 2 using uhci_hcd
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2
input: Logitech Unifying Device. Wireless PID:4008 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/input/input6
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4008] on usb-0000:00:1d.0-2:1
input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/input/input7
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:1d.0-2:2
scsi 4:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
usb 5-1: New USB device found, idVendor=18e8, idProduct=6252
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Broadcom Bluetooth USB
usb 5-1: Manufacturer: Broadcom Corp
sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[317]: starting version 204
lp: driver loaded but no devices found
EXT4-fs (sda1): Ignoring removed nobh option
EXT4-fs (sda1): Mount option "nouser_xattr" will be removed by 3.5
Contact linux-ext4@vger.kernel.org if you think we should keep it.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,barrier=0,nobh,nodelalloc,journal_ioprio=0,nouser_xattr
intel_rng: FWH not detected
ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
r8187se: module is from the staging directory, the quality is unknown, you have been warned.
r8187se:
Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
r8187se: Copyright (c) 2004-2005, Andrea Merello
r8180: Initializing module
r8180: Wireless extensions version 22
r8180: Initializing proc filesystem
r8180: Configuring chip resources
rtl8180_init:Error channel plan! Set to default.
r8180: Channel plan is 0
Dot11d_Init()
r8180: MAC controller is a RTL8187SE b/g
r8180: usValue is 0x100
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
leds_ss4200: no LED devices found
r8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!
r8180: IRQ 18
r8180: Driver probe completed
usbcore: registered new interface driver btusb
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x40038205
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000003
SKU: customization=0x00000082
SKU: external_amp=0x0
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Internal Mic=0x19
Mic=0x18
realtek: No valid SSID, checking pincfg 0x40038205 for NID 0x1d
realtek: Enabling init ASM_ID=0x8205 CODEC_ID=10ec0269
cfg80211: Calling CRDA to update world regulatory domain
Linux video capture interface: v2.00
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
type=1400 audit(1383789138.655:2): apparmor="STATUS" operation="profile_load" parent=414 profile="unconfined" name="/sbin/dhclient" pid=420 comm="apparmor_parser"
type=1400 audit(1383789138.655:3): apparmor="STATUS" operation="profile_load" parent=414 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
type=1400 audit(1383789138.655:4): apparmor="STATUS" operation="profile_load" parent=414 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
type=1400 audit(1383789138.659:5): apparmor="STATUS" operation="profile_replace" parent=414 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
type=1400 audit(1383789138.659:6): apparmor="STATUS" operation="profile_replace" parent=414 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
type=1400 audit(1383789138.659:7): apparmor="STATUS" operation="profile_replace" parent=414 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
uvcvideo: Found UVC 1.00 device FS13FF-183 (05c8:0303)
input: FS13FF-183 as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 526267
usb 1-3: ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
usb 1-3: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
ath9k_htc 1-3:1.0: ath9k_htc: HTC initialized with 33 credits
ath9k_htc 1-3:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: Atheros AR9271 Rev:1
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: failsafe main process (504) killed by TERM signal
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (605) terminated with status 1
type=1400 audit(1383789144.551:8): apparmor="STATUS" operation="profile_load" parent=630 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=727 comm="apparmor_parser"
type=1400 audit(1383789144.551:9): apparmor="STATUS" operation="profile_load" parent=630 profile="unconfined" name="/usr/sbin/cupsd" pid=727 comm="apparmor_parser"
type=1400 audit(1383789144.563:10): apparmor="STATUS" operation="profile_replace" parent=630 profile="unconfined" name="/usr/sbin/cupsd" pid=727 comm="apparmor_parser"
type=1400 audit(1383789145.099:11): apparmor="STATUS" operation="profile_replace" parent=786 profile="unconfined" name="/sbin/dhclient" pid=791 comm="apparmor_parser"
type=1400 audit(1383789145.099:12): apparmor="STATUS" operation="profile_replace" parent=786 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=791 comm="apparmor_parser"
type=1400 audit(1383789145.099:13): apparmor="STATUS" operation="profile_replace" parent=786 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=791 comm="apparmor_parser"
type=1400 audit(1383789145.107:14): apparmor="STATUS" operation="profile_replace" parent=786 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=791 comm="apparmor_parser"
type=1400 audit(1383789145.107:15): apparmor="STATUS" operation="profile_replace" parent=786 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=791 comm="apparmor_parser"
type=1400 audit(1383789145.107:16): apparmor="STATUS" operation="profile_replace" parent=786 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=791 comm="apparmor_parser"
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8180: Bringing up iface
type=1400 audit(1383789145.579:17): apparmor="STATUS" operation="profile_load" parent=786 profile="unconfined" name="/usr/bin/evince" pid=792 comm="apparmor_parser"
r8180: Card successfully reset
r8180: WIRELESS_MODE_G
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
bio: create slab at 1
r8180: Bringing up iface
r8180: Card successfully reset
r8180: WIRELESS_MODE_G
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8180: Bringing up iface
r8180: Card successfully reset
Adding 2194428k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:2194428k FS
r8180: WIRELESS_MODE_G
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan1: authenticate with 18:17:25:21:55:56
wlan1: send auth to 18:17:25:21:55:56 (try 1/3)
wlan1: authenticated
wlan1: associate with 18:17:25:21:55:56 (try 1/3)
wlan1: RX AssocResp from 18:17:25:21:55:56 (capab=0x411 status=0 aid=2)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
=>>>>>>>>>>=============================>set power:1, 46966!
perf samples too long (2560 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5018 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf samples too long (10078 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
perf samples too long (103351 > 20000), lowering kernel.perf_event_max_sample_rate to 6250
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 11.916 msecs
perf samples too long (102645 > 40000), lowering kernel.perf_event_max_sample_rate to 3250
perf samples too long (101843 > 76923), lowering kernel.perf_event_max_sample_rate to 1750
init: tty2 main process ended, respawning