dmesg - Complex
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:35:23 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f5ffbff] usable
BIOS-e820: [mem 0x000000007f5ffc00-0x000000007f601bff] ACPI NVS
BIOS-e820: [mem 0x000000007f603c00-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: Dell Inc. OptiPlex 745 /0KG317, BIOS 2.0.8 11/30/2006
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x7f5ff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 000000000 write-back
1 base 07F800000 mask FFF800000 uncachable
2 base 07F700000 mask FFFF00000 uncachable
3 base 080000000 mask F80000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 64GB, type WB
reg 1, base: 2040MB, range: 8MB, type UC
reg 2, base: 2039MB, range: 1MB, type UC
reg 3, base: 2GB, range: 2GB, type UC
total RAM covered: 63479M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 32GB, type WB
e820: update [mem 0x7f700000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x7f5fefff]
[mem 0x00000000-0x7f3fffff] page 2M
[mem 0x7f400000-0x7f5fefff] page 4k
kernel direct mapping tables up to 0x7f5fefff @ [mem 0x1fffc000-0x1fffffff]
RAMDISK: [mem 0x34234000-0x36111fff]
ACPI: RSDP 00000000000febf0 00024 (v02 DELL )
ACPI: XSDT 00000000000fce8e 0006C (v01 DELL B8K 00000014 ASL 00000061)
ACPI: FACP 00000000000fcfb6 000F4 (v03 DELL B8K 00000014 ASL 00000061)
ACPI: DSDT 00000000fff69ab8 04337 (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 000000007f5ffc00 00040
ACPI: SSDT 00000000fff6df0e 000AA (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fd0aa 00092 (v01 DELL B8K 00000014 ASL 00000061)
ACPI: BOOT 00000000000fd13c 00028 (v01 DELL B8K 00000014 ASL 00000061)
ACPI: ASF! 00000000000fd164 00092 (v32 DELL B8K 00000014 ASL 00000061)
ACPI: MCFG 00000000000fd1f6 0003E (v01 DELL B8K 00000014 ASL 00000061)
ACPI: HPET 00000000000fd234 00038 (v01 DELL B8K 00000014 ASL 00000061)
ACPI: TCPA 00000000000fd490 00032 (v01 DELL B8K 00000014 ASL 00000061)
ACPI: SLIC 00000000000fd26c 00176 (v01 DELL B8K 00000014 ASL 00000061)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007f5fefff]
Initmem setup node 0 [mem 0x00000000-0x7f5fefff]
NODE_DATA [mem 0x7f5fa000-0x7f5fefff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007cc00000-ffff88007ebfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x7f5fefff]
On node 0 totalpages: 521614
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 8088 pages used for memmap
DMA32 zone: 509543 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007f200000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 513456
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2005356k/2086908k available (7006k kernel code, 452k absent, 81100k reserved, 6238k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2793.238 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.47 BogoMIPS (lpj=11172952)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26690 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) D CPU 2.80GHz (fam: 0f, model: 04, stepping: 07)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Disabled fast string operations
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (11172.95 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7f5ffc00-0x7f601bff] (8192 bytes)
reboot: BIOS series board detected. Selecting Dell OptiPlex 745-method for reboots.
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI BIOS Bug: Warning: Incorrect checksum in table [TCPA] - 0x00, should be 0x89 (20121018/tbutils-324)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xff980800-0xff980bff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:2990] type 00 class 0x060000
pci 0000:00:02.0: [8086:2992] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xdfe00000-0xdfefffff]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0xecb8-0xecbf]
pci 0000:00:02.1: [8086:2993] type 00 class 0x038000
pci 0000:00:02.1: reg 10: [mem 0xdff00000-0xdfffffff]
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0xff20-0xff3f]
pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0xff00-0xff1f]
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xdfdfbc00-0xdfdfbfff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xdfdfc000-0xdfdfffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xff980800-0xff980bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20: [io 0xfec0-0xfecf]
pci 0000:00:1f.2: reg 24: [io 0xecc0-0xeccf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xdfdfbb00-0xdfdfbbff]
pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff]
pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
pci 0000:00:1f.5: reg 10: [io 0xfe40-0xfe47]
pci 0000:00:1f.5: reg 14: [io 0xfe50-0xfe53]
pci 0000:00:1f.5: reg 18: [io 0xfe60-0xfe67]
pci 0000:00:1f.5: reg 1c: [io 0xfe70-0xfe73]
pci 0000:00:1f.5: reg 20: [io 0xfed0-0xfedf]
pci 0000:00:1f.5: reg 24: [io 0xecd0-0xecdf]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:02:00.0: [14e4:167a] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0xdfbf0000-0xdfbfffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f5ffc00-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [io 0x0800-0x085f] has been reserved
system 00:00: [io 0x0c00-0x0c7f] has been reserved
system 00:00: [io 0x0860-0x08ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x00100000-0x00ffffff] could not be reserved
system 00:08: [mem 0x01000000-0x7f5ffbff] could not be reserved
system 00:08: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:08: [mem 0xffc00000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:09: [io 0x0100-0x01fe] has been reserved
system 00:09: [io 0x0200-0x0277] has been reserved
system 00:09: [io 0x0280-0x02e7] has been reserved
system 00:09: [io 0x02f0-0x02f7] has been reserved
system 00:09: [io 0x0300-0x0377] has been reserved
system 00:09: [io 0x0380-0x03bb] has been reserved
system 00:09: [io 0x03c0-0x03e7] could not be reserved
system 00:09: [io 0x03f6-0x03f7] has been reserved
system 00:09: [io 0x0400-0x04cf] has been reserved
system 00:09: [io 0x04d2-0x057f] has been reserved
system 00:09: [io 0x0580-0x0677] has been reserved
system 00:09: [io 0x0680-0x0777] has been reserved
system 00:09: [io 0x0780-0x07bb] has been reserved
system 00:09: [io 0x07c0-0x07ff] has been reserved
system 00:09: [io 0x08e0-0x08ff] has been reserved
system 00:09: [io 0x0900-0x09fe] has been reserved
system 00:09: [io 0x0a00-0x0afe] has been reserved
system 00:09: [io 0x0b00-0x0bfe] has been reserved
system 00:09: [io 0x0c80-0x0caf] has been reserved
system 00:09: [io 0x0cc0-0x0cf7] has been reserved
system 00:09: [io 0x0d00-0x0dfe] has been reserved
system 00:09: [io 0x0e00-0x0efe] has been reserved
system 00:09: [io 0x0f00-0x0ffe] has been reserved
system 00:09: [io 0x2000-0x20fe] has been reserved
system 00:09: [io 0x2100-0x21fe] has been reserved
system 00:09: [io 0x2200-0x22fe] has been reserved
system 00:09: [io 0x2300-0x23fe] has been reserved
system 00:09: [io 0x2400-0x24fe] has been reserved
system 00:09: [io 0x2500-0x25fe] has been reserved
system 00:09: [io 0x2600-0x26fe] has been reserved
system 00:09: [io 0x2700-0x27fe] has been reserved
system 00:09: [io 0x2800-0x28fe] has been reserved
system 00:09: [io 0x2900-0x29fe] has been reserved
system 00:09: [io 0x2a00-0x2afe] has been reserved
system 00:09: [io 0x2b00-0x2bfe] has been reserved
system 00:09: [io 0x2c00-0x2cfe] has been reserved
system 00:09: [io 0x2d00-0x2dfe] has been reserved
system 00:09: [io 0x2e00-0x2efe] has been reserved
system 00:09: [io 0x2f00-0x2ffe] has been reserved
system 00:09: [io 0x5000-0x50fe] has been reserved
system 00:09: [io 0x5100-0x51fe] has been reserved
system 00:09: [io 0x5200-0x52fe] has been reserved
system 00:09: [io 0x5300-0x53fe] has been reserved
system 00:09: [io 0x5400-0x54fe] has been reserved
system 00:09: [io 0x5500-0x55fe] has been reserved
system 00:09: [io 0x5600-0x56fe] has been reserved
system 00:09: [io 0x5700-0x57fe] has been reserved
system 00:09: [io 0x5800-0x58fe] has been reserved
system 00:09: [io 0x5900-0x59fe] has been reserved
system 00:09: [io 0x5a00-0x5afe] has been reserved
system 00:09: [io 0x5b00-0x5bfe] has been reserved
system 00:09: [io 0x5c00-0x5cfe] has been reserved
system 00:09: [io 0x5d00-0x5dfe] has been reserved
system 00:09: [io 0x5e00-0x5efe] has been reserved
system 00:09: [io 0x5f00-0x5ffe] has been reserved
system 00:09: [io 0x6000-0x60fe] has been reserved
system 00:09: [io 0x6100-0x61fe] has been reserved
system 00:09: [io 0x6200-0x62fe] has been reserved
system 00:09: [io 0x6300-0x63fe] has been reserved
system 00:09: [io 0x6400-0x64fe] has been reserved
system 00:09: [io 0x6500-0x65fe] has been reserved
system 00:09: [io 0x6600-0x66fe] has been reserved
system 00:09: [io 0x6700-0x67fe] has been reserved
system 00:09: [io 0x6800-0x68fe] has been reserved
system 00:09: [io 0x6900-0x69fe] has been reserved
system 00:09: [io 0x6a00-0x6afe] has been reserved
system 00:09: [io 0x6b00-0x6bfe] has been reserved
system 00:09: [io 0x6c00-0x6cfe] has been reserved
system 00:09: [io 0x6d00-0x6dfe] has been reserved
system 00:09: [io 0x6e00-0x6efe] has been reserved
system 00:09: [io 0x6f00-0x6ffe] has been reserved
system 00:09: [io 0xa000-0xa0fe] has been reserved
system 00:09: [io 0xa100-0xa1fe] has been reserved
system 00:09: [io 0xa200-0xa2fe] has been reserved
system 00:09: [io 0xa300-0xa3fe] has been reserved
system 00:09: [io 0xa400-0xa4fe] has been reserved
system 00:09: [io 0xa500-0xa5fe] has been reserved
system 00:09: [io 0xa600-0xa6fe] has been reserved
system 00:09: [io 0xa700-0xa7fe] has been reserved
system 00:09: [io 0xa800-0xa8fe] has been reserved
system 00:09: [io 0xa900-0xa9fe] has been reserved
system 00:09: [io 0xaa00-0xaafe] has been reserved
system 00:09: [io 0xab00-0xabfe] has been reserved
system 00:09: [io 0xac00-0xacfe] has been reserved
system 00:09: [io 0xad00-0xadfe] has been reserved
system 00:09: [io 0xae00-0xaefe] has been reserved
system 00:09: [io 0xaf00-0xaffe] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfeda0000-0xfedacfff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:00:1c.4: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xdfc00000-0xdfcfffff]
pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfbfffff]
pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31608k freed
Simple Boot Flag at 0x7a set to 0x1
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1383307559.384:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 3978
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965Q Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20
ata_piix 0000:00:1f.5: MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 20
ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 20
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xdfdfbc00
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4fb521df0b0fa81f775431361b8076d5d0f1869a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-11-01 12:06:00 UTC (1383307560)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 2792.999 MHz
Switching to clocksource tsc
usb 2-4: new high-speed USB device number 2 using ehci-pci
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 300)
usb 2-4: New USB device found, idVendor=13fe, idProduct=5200
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product:
usb 2-4: Manufacturer:
usb 2-4: SerialNumber: 07073872AD793E65
ata1.00: ATA-7: ST3160812AS, 3.ADJ, max UDMA/133
ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3160812AS 3.AD PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 300)
ata2.01: link offline, clearing class 3 to NONE
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D300, max UDMA/33
ata2.00: applying bridge limits
ata2.00: configured for UDMA/33
usb 3-2: new low-speed USB device number 2 using uhci_hcd
scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D300 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 6x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[105]: starting version 175
usb 3-2: New USB device found, idVendor=046d, idProduct=c51b
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
[drm] Initialized drm 1.1.0 20060810
tg3.c:v3.128 (December 03, 2012)
Disabling lock debugging due to kernel taint
tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:18:8b:60:91:fa
tg3 0000:02:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 7-2: new low-speed USB device number 2 using uhci_hcd
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
hid-generic 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0
hid-generic 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-2/input1
[drm] initialized overlay support
usb 7-2: New USB device found, idVendor=413c, idProduct=2105
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Dell USB Keyboard
usb 7-2: Manufacturer: Dell
fbcon: inteldrmfb (fb0) is primary device
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input3
hid-generic 0003:413C:2105.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-2/input0
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
xor: automatically using best checksumming function:
generic_sse: 3827.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
scsi 4:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 60566016 512-byte logical blocks: (31.0 GB/28.8 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 2b 00 00 08
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT2-fs (loop1): warning: mounting unchecked fs, running e2fsck is recommended
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[2326]: starting version 175
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
lp: driver loaded but no devices found
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-cups-reload main process (2461) terminated with status 1
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \GIC3 1 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \GLBC 2 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SACT 3 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SSTS 4 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000008b0-0x00000000000008bf SystemIO conflicts with Region \GHI5 1 (20121018/utaddress-251)
ACPI Warning: 0x00000000000008b0-0x00000000000008bf SystemIO conflicts with Region \GHI0 2 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000880-0x00000000000008af SystemIO conflicts with Region \GIC2 1 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000880-0x00000000000008af SystemIO conflicts with Region \GIU3 2 (20121018/utaddress-251)
ACPI Warning: 0x0000000000000880-0x00000000000008af SystemIO conflicts with Region \GIC1 3 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
ppdev: user-space parallel port driver
microcode: CPU0 sig=0xf47, pf=0x10, revision=0x3
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU1 sig=0xf47, pf=0x10, revision=0x3
microcode: Microcode Update Driver: v2.00 , Peter Oruba
device-mapper: multipath: version 1.5.1 loaded
init: failsafe main process (2570) killed by TERM signal
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
tg3 0000:02:00.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
init: alsa-restore main process (2990) terminated with status 99
tg3 0000:02:00.0 eth6: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth6: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth6: link becomes ready
init: plymouth-stop pre-start process (3589) terminated with status 1