dmesg - md2k14ssd

Return To md2k14ssd System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
BIOS-e820: [mem 0x000000000009b400-0x000000000009bfff] reserved
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000adde3fff] usable
BIOS-e820: [mem 0x00000000adde4000-0x00000000addedfff] ACPI data
BIOS-e820: [mem 0x00000000addee000-0x00000000bbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000847ffefff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: HP ProLiant DL320e Gen8 v2, BIOS P80 09/01/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x847fff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00B8000000 mask 7FF8000000 uncachable
  1 base 00C0000000 mask 7FC0000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xadde4 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000095000] 95000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x847c00000-0x847dfffff]
 [mem 0x847c00000-0x847dfffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x844000000-0x847bfffff]
 [mem 0x844000000-0x847bfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x843ffffff]
 [mem 0x800000000-0x83fffffff] page 1G
 [mem 0x840000000-0x843ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xadde3fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0xadbfffff] page 2M
 [mem 0xadc00000-0xadde3fff] page 4k
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
 [mem 0x100000000-0x7ffffffff] page 1G
init_memory_mapping: [mem 0x847e00000-0x847ffefff]
 [mem 0x847e00000-0x847ffefff] page 4k
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
RAMDISK: [mem 0x35eec000-0x36f6dfff]
ACPI: RSDP 00000000000f4f00 00024 (v02 HP    )
ACPI: XSDT 00000000adde6400 000AC (v01 HP     ProLiant 00000002   \xffffffd2? 0000162E)
ACPI: FACP 00000000adde6540 000F4 (v03 HP     ProLiant 00000002   \xffffffd2? 0000162E)
ACPI: DSDT 00000000adde6640 02A13 (v01 HP         DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000adde4140 00040
ACPI: SPCR 00000000adde4180 00050 (v01 HP     SPCRRBSU 00000001   \xffffffd2? 0000162E)
ACPI: MCFG 00000000adde4200 0003C (v01 HP     ProLiant 00000001      00000000)
ACPI: HPET 00000000adde4240 00038 (v01 HP     ProLiant 00000002   \xffffffd2? 0000162E)
ACPI: FFFF 00000000adde4280 00064 (v02 HP     ProLiant 00000002   \xffffffd2? 0000162E)
ACPI: SPMI 00000000adde4300 00040 (v05 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: ERST 00000000adde4340 00230 (v01 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: APIC 00000000adde4580 00252 (v01 HP     ProLiant 00000002      00000000)
ACPI: FFFF 00000000adde4800 00176 (v01 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: BERT 00000000adde4980 00030 (v01 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: HEST 00000000adde49c0 000BC (v01 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: DMAR 00000000adde4a80 00494 (v01 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: FFFF 00000000adde63c0 0002D (v01 HP     ProLiant 00000001      00000000)
ACPI: SSDT 00000000adde9080 00137 (v03     HP  CRSPCI0 00000002   HP 00000001)
ACPI: SSDT 00000000adde91c0 002CB (v03     HP   riser0 00000002 INTL 20030228)
ACPI: SSDT 00000000adde94c0 00377 (v01     HP     pmab 00000001 INTL 20090625)
ACPI: SSDT 00000000adde9840 02864 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000847ffefff]
Initmem setup node 0 [mem 0x00000000-0x847ffefff]
  NODE_DATA [mem 0x847ffa000-0x847ffefff]
 [ffffea0000000000-ffffea00211fffff] PMD -> [ffff880827600000-ffff8808473fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x847ffefff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009afff]
  node   0: [mem 0x00100000-0xadde3fff]
  node   0: [mem 0x100000000-0x847ffefff]
On node 0 totalpages: 8347005
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3994 pages, LIFO batch:0
  DMA32 zone: 11064 pages used for memmap
  DMA32 zone: 708068 pages, LIFO batch:31
  Normal zone: 119296 pages used for memmap
  Normal zone: 7634943 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 64 CPUs, 56 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
PM: Registered nosave memory: [mem 0xadde4000-0xaddedfff]
PM: Registered nosave memory: [mem 0xaddee000-0xbbffffff]
PM: Registered nosave memory: [mem 0xbc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]
PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xbc000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:64 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880847400000 s86720 r8192 d23872 u131072
pcpu-alloc: s86720 r8192 d23872 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 
pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8216560
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32758804K/33388020K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 629216K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=64.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1192 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 133693440 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3292.465 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.93 BogoMIPS (lpj=13169860)
pid_max: default: 65536 minimum: 512
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27796 entries in 109 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000b5ffd000 end: 0x000000b5ffffff
dmar: RMRR base: 0x000000b5ff6000 end: 0x000000b5ffcfff
dmar: RMRR base: 0x000000b5f93000 end: 0x000000b5f94fff
dmar: RMRR base: 0x000000b5f8f000 end: 0x000000b5f92fff
dmar: RMRR base: 0x000000b5f7f000 end: 0x000000b5f8efff
dmar: RMRR base: 0x000000b1f7f000 end: 0x000000b5f7efff
dmar: RMRR base: 0x000000adf7f000 end: 0x000000b1f7efff
dmar: RMRR base: 0x000000adf7e000 end: 0x000000adf7efff
dmar: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
dmar: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
dmar: RMRR base: 0x000000c0000000 end: 0x000000dfffffff
IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 0
HPET id 0 under DRHD base 0xfed91000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7
Brought up 8 CPUs
smpboot: Total of 8 processors activated (52679.44 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
regulator-dummy: no parameters
RTC time: 12:07:20, date: 10/28/13
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xb8000000-0xbbffffff] (base 0xb8000000)
PCI: MMCONFIG at [mem 0xb8000000-0xbbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-0e])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00
acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed44fff] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-0e]
pci_bus 0000:00: root bus resource [mem 0xbc000000-0xfbffffff]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io  0x03c0-0x03df]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: [8086:0c09] type 01 class 0x060400
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfacf0000-0xfacfffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xface0000-0xface03ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfacd0000-0xfacd03ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c04] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io  0x1000-0x1007]
pci 0000:00:1f.2: reg 0x14: [io  0x1008-0x100b]
pci 0000:00:1f.2: reg 0x18: [io  0x1010-0x1017]
pci 0000:00:1f.2: reg 0x1c: [io  0x1018-0x101b]
pci 0000:00:1f.2: reg 0x20: [io  0x1020-0x103f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfacc0000-0xfacc07ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:04:00.0: [103c:323b] type 00 class 0x010400
pci 0000:04:00.0: reg 0x10: [mem 0xfbf00000-0xfbffffff 64bit]
pci 0000:04:00.0: reg 0x18: [mem 0xfbef0000-0xfbef03ff 64bit]
pci 0000:04:00.0: reg 0x20: [io  0x4000-0x40ff]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:04:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:01.0: PCI bridge to [bus 04]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbffffff]
pci 0000:00:01.1: PCI bridge to [bus 07]
pci 0000:02:00.0: [1590:005f] type 00 class 0x058000
pci 0000:02:00.0: reg 0x10: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xfbdf0000-0xfbdf7fff 64bit]
pci 0000:00:01.2: PCI bridge to [bus 02]
pci 0000:00:01.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:01.2:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:03:00.0: [14e4:165f] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfabf0000-0xfabfffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xfabe0000-0xfabeffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfabd0000-0xfabdffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:165f] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xfabc0000-0xfabcffff 64bit pref]
pci 0000:03:00.1: reg 0x18: [mem 0xfabb0000-0xfabbffff 64bit pref]
pci 0000:03:00.1: reg 0x20: [mem 0xfaba0000-0xfabaffff 64bit pref]
pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5:   bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
pci 0000:01:00.0: [103c:3306] type 00 class 0x088000
pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
pci 0000:01:00.0: reg 0x14: [mem 0xfbcf0000-0xfbcf01ff]
pci 0000:01:00.0: reg 0x18: [io  0x3400-0x34ff]
pci 0000:01:00.1: [102b:0533] type 00 class 0x030000
pci 0000:01:00.1: reg 0x10: [mem 0xbf000000-0xbfffffff pref]
pci 0000:01:00.1: reg 0x14: [mem 0xfbce0000-0xfbce3fff]
pci 0000:01:00.1: reg 0x18: [mem 0xfb000000-0xfb7fffff]
pci 0000:01:00.2: [103c:3307] type 00 class 0x088000
pci 0000:01:00.2: reg 0x10: [io  0x3800-0x38ff]
pci 0000:01:00.2: reg 0x14: [mem 0xfaff0000-0xfaff00ff]
pci 0000:01:00.2: reg 0x18: [mem 0xfae00000-0xfaefffff]
pci 0000:01:00.2: reg 0x1c: [mem 0xfad80000-0xfadfffff]
pci 0000:01:00.2: reg 0x20: [mem 0xfad70000-0xfad77fff]
pci 0000:01:00.2: reg 0x24: [mem 0xfad60000-0xfad67fff]
pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300
pci 0000:01:00.4: reg 0x20: [io  0x3c00-0x3c1f]
pci 0000:00:1c.7: PCI bridge to [bus 01]
pci 0000:00:1c.7:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.7:   bridge window [mem 0xfad00000-0xfbcfffff]
pci 0000:00:1c.7:   bridge window [mem 0xbf000000-0xbfffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.1
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff]
e820: reserve RAM buffer [mem 0xadde4000-0xafffffff]
e820: reserve RAM buffer [mem 0x847fff000-0x847ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x0408-0x040f] has been reserved
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0310-0x0313] has been reserved
system 00:00: [io  0x0316-0x0317] has been reserved
system 00:00: [io  0x0700-0x071f] has been reserved
system 00:00: [io  0x0880-0x08ff] has been reserved
system 00:00: [io  0x0900-0x097f] has been reserved
system 00:00: [io  0x0cd4-0x0cd7] has been reserved
system 00:00: [io  0x0cd0-0x0cd3] has been reserved
system 00:00: [io  0x0f50-0x0f58] has been reserved
system 00:00: [io  0x0ca0-0x0ca1] has been reserved
system 00:00: [io  0x0ca4-0x0ca5] has been reserved
system 00:00: [io  0x02f8-0x02ff] has been reserved
system 00:00: [mem 0xb8000000-0xbbffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed91fff] could not be reserved
system 00:00: [mem 0xfed90000-0xfed91fff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [dma 7]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0a] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0a] add_size 200000
pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 03] add_size 400000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:01.0: BAR 15: assigned [mem 0xbc000000-0xbc0fffff pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc100000-0xbc2fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xbc300000-0xbc4fffff 64bit pref]
pci 0000:00:1c.5: BAR 14: assigned [mem 0xbc500000-0xbc9fffff]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.5: BAR 13: assigned [io  0x5000-0x5fff]
pci 0000:04:00.0: BAR 6: assigned [mem 0xbc000000-0xbc07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 04]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbffffff]
pci 0000:00:01.0:   bridge window [mem 0xbc000000-0xbc0fffff pref]
pci 0000:00:01.1: PCI bridge to [bus 07]
pci 0000:00:01.2: PCI bridge to [bus 02]
pci 0000:00:01.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:01.2:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xbc100000-0xbc2fffff]
pci 0000:00:1c.0:   bridge window [mem 0xbc300000-0xbc4fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfab00000-0xfab3ffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0xfab40000-0xfab7ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.5:   bridge window [mem 0xbc500000-0xbc9fffff]
pci 0000:00:1c.5:   bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 01]
pci 0000:00:1c.7:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.7:   bridge window [mem 0xfad00000-0xfbcfffff]
pci 0000:00:1c.7:   bridge window [mem 0xbf000000-0xbfffffff 64bit pref]
pci_bus 0000:00: resource 4 [mem 0xbc000000-0xfbffffff]
pci_bus 0000:00: resource 5 [io  0x1000-0xffff]
pci_bus 0000:00: resource 6 [io  0x0000-0x03af]
pci_bus 0000:00: resource 7 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 8 [io  0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff]
pci_bus 0000:00: resource 10 [io  0x03b0-0x03bb]
pci_bus 0000:00: resource 11 [io  0x03c0-0x03df]
pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbffffff]
pci_bus 0000:04: resource 2 [mem 0xbc000000-0xbc0fffff pref]
pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:0a: resource 1 [mem 0xbc100000-0xbc2fffff]
pci_bus 0000:0a: resource 2 [mem 0xbc300000-0xbc4fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xbc500000-0xbc9fffff]
pci_bus 0000:03: resource 2 [mem 0xfab00000-0xfabfffff 64bit pref]
pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbcfffff]
pci_bus 0000:01: resource 2 [mem 0xbf000000-0xbfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.1: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16904K (ffff880035eec000 - ffff880036f6e000)
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa9de4000-0xadde4000] (64MB) mapped at [ffff8800a9de4000-ffff8800adde3fff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1382962040.420:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pcieport 0000:00:01.1: irq 42 for MSI/MSI-X
pcieport 0000:00:01.2: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
APEI: Can not request [mem 0x000e8024-0x000e804f] for APEI ERST registers
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 21, io mem 0xface0000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 20, io mem 0xfacd0000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb3: SerialNumber: 0000:01:00.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 10 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb5: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 1:466:128
acpi PNP0C02:00: hash matches
acpi device:03: hash matches
rtc_cmos 00:07: setting system clock to 2013-10-28 12:07:21 UTC (1382962041)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
systemd-udevd[257]: starting version 204
HP HPSA Driver (v 2.0.2-1)
hpsa 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
hpsa 0000:04:00.0: MSIX
hpsa 0000:04:00.0: irq 45 for MSI/MSI-X
hpsa 0000:04:00.0: irq 46 for MSI/MSI-X
hpsa 0000:04:00.0: irq 47 for MSI/MSI-X
hpsa 0000:04:00.0: irq 48 for MSI/MSI-X
hpsa 0000:04:00.0: irq 49 for MSI/MSI-X
hpsa 0000:04:00.0: irq 50 for MSI/MSI-X
hpsa 0000:04:00.0: irq 51 for MSI/MSI-X
hpsa 0000:04:00.0: irq 52 for MSI/MSI-X
pps_core: module verification failed: signature and/or required key missing - tainting kernel
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 53 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
tg3.c:v3.132 (May 21, 2013)
hpsa 0000:04:00.0: hpsa0:  at IRQ 45 using DAC
scsi0 : hpsa
hpsa 0000:04:00.0: RAID              device c0b3t0l0 added.
hpsa 0000:04:00.0: Direct-Access     device c0b0t0l0 added.
scsi 0:3:0:0: RAID              HP       P222             4.68 PQ: 0 ANSI: 5
scsi 0:0:0:0: Direct-Access     HP       LOGICAL VOLUME   4.68 PQ: 0 ANSI: 5
scsi 0:3:0:0: Attached scsi generic sg0 type 12
sd 0:0:0:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sda] 234372285 512-byte logical blocks: (119 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfacc0000 port 0xfacc0100 irq 53
ata2: SATA max UDMA/133 abar m2048@0xfacc0000 port 0xfacc0180 irq 53
ata3: SATA max UDMA/133 abar m2048@0xfacc0000 port 0xfacc0200 irq 53
ata4: SATA max UDMA/133 abar m2048@0xfacc0000 port 0xfacc0280 irq 53
ata5: SATA max UDMA/133 abar m2048@0xfacc0000 port 0xfacc0300 irq 53
ata6: SATA max UDMA/133 abar m2048@0xfacc0000 port 0xfacc0380 irq 53
sd 0:0:0:0: [sda] Attached SCSI disk
tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 84:34:97:11:60:80
tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 84:34:97:11:60:81
tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
usb 4-3: new high-speed USB device number 2 using xhci_hcd
usb 4-3: New USB device found, idVendor=0424, idProduct=2660
usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 2 ports detected
tsc: Refined TSC clocksource calibration: 3292.375 MHz
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Adding 1000444k swap on /dev/sda3.  Priority:-1 extents:1 across:1000444k SSFS
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd-udevd[476]: starting version 204
lp: driver loaded but no devices found
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF)
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.2, timer margin: 30 seconds (nowayout=0).
ACPI Warning: 0x0000000000000928-0x000000000000092f SystemIO conflicts with Region \SGPE 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x16
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x16
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x16
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x16
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x16
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x16
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x16
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x16
microcode: Microcode Update Driver: v2.00 , Peter Oruba
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xbf000000, mapped to 0xffffc90007800000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
type=1400 audit(1382962043.921:2): apparmor="STATUS" operation="profile_load" parent=552 profile="unconfined" name="/sbin/dhclient" pid=555 comm="apparmor_parser"
type=1400 audit(1382962043.921:3): apparmor="STATUS" operation="profile_load" parent=552 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=555 comm="apparmor_parser"
type=1400 audit(1382962043.921:4): apparmor="STATUS" operation="profile_load" parent=552 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=555 comm="apparmor_parser"
tg3 0000:03:00.0: irq 54 for MSI/MSI-X
tg3 0000:03:00.0: irq 55 for MSI/MSI-X
tg3 0000:03:00.0: irq 56 for MSI/MSI-X
tg3 0000:03:00.0: irq 57 for MSI/MSI-X
tg3 0000:03:00.0: irq 58 for MSI/MSI-X
type=1400 audit(1382962043.949:5): apparmor="STATUS" operation="profile_replace" parent=637 profile="unconfined" name="/sbin/dhclient" pid=640 comm="apparmor_parser"
type=1400 audit(1382962043.949:6): apparmor="STATUS" operation="profile_replace" parent=637 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=640 comm="apparmor_parser"
type=1400 audit(1382962043.949:7): apparmor="STATUS" operation="profile_replace" parent=637 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=640 comm="apparmor_parser"
type=1400 audit(1382962044.005:8): apparmor="STATUS" operation="profile_replace" parent=631 profile="unconfined" name="/sbin/dhclient" pid=634 comm="apparmor_parser"
type=1400 audit(1382962044.005:9): apparmor="STATUS" operation="profile_replace" parent=631 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=634 comm="apparmor_parser"
type=1400 audit(1382962044.005:10): apparmor="STATUS" operation="profile_replace" parent=631 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=634 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: failsafe main process (700) killed by TERM signal
tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:03:00.0 eth0: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
perf samples too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

Return To md2k14ssd System Information