dmesg - Complex
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@komainu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:12:00 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bffcffff] usable
BIOS-e820: [mem 0x00000000bffd0000-0x00000000bffddfff] ACPI data
BIOS-e820: [mem 0x00000000bffde000-0x00000000bfffffff] ACPI NVS
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: MSI MS-7309/MS-7309, BIOS V1.9 08/31/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 0100000000 mask FFC0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000140000000 aka 5120M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b39000, 0x01b39fff] PGTABLE
RAMDISK: [mem 0x34ed0000-0x3675ffff]
ACPI: RSDP 000f93e0 00014 (v00 ACPIAM)
ACPI: RSDT bffd0000 00038 (v01 A M I OEMRSDT 08000731 MSFT 00000097)
ACPI: FACP bffd0200 00084 (v02 A M I OEMFACP 08000731 MSFT 00000097)
ACPI: DSDT bffd0440 04395 (v01 1ADMB 1ADMB006 00000006 INTL 20051117)
ACPI: FACS bffde000 00040
ACPI: APIC bffd0390 00070 (v01 A M I OEMAPIC 08000731 MSFT 00000097)
ACPI: MCFG bffd0400 0003C (v01 A M I OEMMCFG 08000731 MSFT 00000097)
ACPI: OEMB bffde040 00060 (v01 A M I AMI_OEM 08000731 MSFT 00000097)
ACPI: HPET bffd47e0 00038 (v01 A M I OEMHPET0 08000731 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
4228MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b3a000, 0x01b3afff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbffcffff]
node 0: [mem 0x00000000-0x3fffffff]
On node 0 totalpages: 1048430
free_area_init_node: node 0, pgdat c1948bc0, node_mem_map f26d0020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 8457 pages used for memmap
HighMem zone: 820178 pages, LIFO batch:31
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]
e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bd0000 s36288 r0 d21056 u57344
pcpu-alloc: s36288 r0 d21056 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1046646
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 10485752 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00140000)
Memory: 4104808K/4193720K available (6351K kernel code, 607K rwdata, 2640K rodata, 880K init, 908K bss, 88912K reserved, 3280712K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1962000 - 0xc1a3e000 ( 880 kB)
.data : 0xc16341e4 - 0xc1961e00 (3255 kB)
.text : 0xc1000000 - 0xc16341e4 (6352 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2009.370 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.74 BogoMIPS (lpj=8037480)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 28K (c1a3e000 - c1a45000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27134 entries in 53 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (fam: 0f, model: 43, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f6ce6000 soft=f6cf0000
smpboot: Booting Node 0, Processors #1 OK
Initializing CPU#1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (8037.20 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbffde000-0xbfffffff] (139264 bytes)
regulator-dummy: no parameters
RTC time: 21:50:19, date: 10/26/13
NET: Registered protocol family 16
EISA bus registered
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, fe0bffff]
TOM2: 0000000140000000 aka 5120M
bus: [bus 00-ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xc0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x140000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
PCI: root bus 00: hardware-probed resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x140000000-0xfcffffffff]
pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
pci 0000:00:01.0: reg 0x10: [io 0x4f00-0x4fff]
pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io 0xdc00-0xdc3f]
pci 0000:00:01.1: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:01.1: reg 0x24: [io 0x6000-0x603f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xdbffb000-0xdbffbfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xdbffac00-0xdbffacff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
pci 0000:00:05.0: reg 0x10: [mem 0xdbff4000-0xdbff7fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
pci 0000:00:07.0: reg 0x10: [mem 0xdbff9000-0xdbff9fff]
pci 0000:00:07.0: reg 0x14: [io 0xd480-0xd487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.0: reg 0x10: [io 0xd400-0xd407]
pci 0000:00:08.0: reg 0x14: [io 0xd080-0xd083]
pci 0000:00:08.0: reg 0x18: [io 0xd000-0xd007]
pci 0000:00:08.0: reg 0x1c: [io 0xcc00-0xcc03]
pci 0000:00:08.0: reg 0x20: [io 0xc880-0xc88f]
pci 0000:00:08.0: reg 0x24: [mem 0xdbff8000-0xdbff8fff]
pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x140000000-0xfcffffffff] (subtractive decode)
pci 0000:02:00.0: [10de:0640] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xdc000000-0xddffffff 64bit]
pci 0000:02:00.0: reg 0x24: [io 0xec00-0xec7f]
pci 0000:02:00.0: reg 0x30: [mem 0xdef80000-0xdeffffff pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff]
pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffd0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x080f] has been reserved
system 00:07: [io 0x4000-0x407f] could not be reserved
system 00:07: [io 0x4080-0x40ff] has been reserved
system 00:07: [io 0x4400-0x447f] has been reserved
system 00:07: [io 0x4480-0x44ff] has been reserved
system 00:07: [io 0x4800-0x487f] has been reserved
system 00:07: [io 0x4880-0x48ff] has been reserved
system 00:07: [io 0x2000-0x207f] has been reserved
system 00:07: [io 0x2080-0x20ff] has been reserved
system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:07: [mem 0xffb80000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:0c: [io 0x0a00-0x0adf] has been reserved
system 00:0c: [io 0x0ae0-0x0aef] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff]
pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
pci 0000:00:04.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0xc0000000-0xffffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x140000000-0xfcffffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x140000000-0xfcffffffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdfffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25152K (f4ed0000 - f6760000)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1382824219.964:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1658
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: setting latency timer to 64
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xdbffac00
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4b7c2664fb134f99aaf5e09f5b6d30d43b5eac95'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 1:994:854
rtc_cmos 00:01: setting system clock to 2013-10-26 21:50:20 UTC (1382824220)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
isapnp: No Plug & Play device found
Freeing unused kernel memory: 880K (c1962000 - c1a3e000)
Write protecting the kernel text: 6356k
Write protecting the kernel read-only data: 2644k
NX-protecting the kernel data: 5932k
systemd-udevd[97]: starting version 204
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
sata_nv 0000:00:08.0: setting latency timer to 64
scsi0 : sata_nv
[drm] Initialized drm 1.1.0 20060810
floppy: module verification failed: signature and/or required key missing - tainting kernel
Floppy drive(s): fd0 is 1.44M
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
forcedeth 0000:00:07.0: setting latency timer to 64
wmi: Mapper loaded
FDC 0 is a post-1991 82077
usb 1-6: new high-speed USB device number 4 using ehci-pci
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x096000a1
nouveau [ DEVICE][0000:02:00.0] Chipset: G96 (NV96)
nouveau [ DEVICE][0000:02:00.0] Family : NV50
nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:02:00.0] BIT signature found
nouveau [ VBIOS][0000:02:00.0] version 62.94.4b.00.06
nouveau [ PFB][0000:02:00.0] RAM type: GDDR3
nouveau [ PFB][0000:02:00.0] RAM size: 512 MiB
nouveau [ PFB][0000:02:00.0] ZCOMP: 2048 tags
usb 1-6: New USB device found, idVendor=13fe, idProduct=5200
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product:
usb 1-6: Manufacturer:
usb 1-6: SerialNumber: 07073872AD793E65
nouveau [ PTHERM][0000:02:00.0] FAN control: PWM
nouveau [ PTHERM][0000:02:00.0] fan management: disabled
nouveau [ PTHERM][0000:02:00.0] internal sensor: yes
[TTM] Zone kernel: Available graphics memory: 425078 kiB
[TTM] Zone highmem: Available graphics memory: 2065434 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 512 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000300 00000028
nouveau [ DRM] DCB outp 01: 02000302 00020030
nouveau [ DRM] DCB outp 02: 04011310 00000028
nouveau [ DRM] DCB outp 03: 01022332 00020010
nouveau [ DRM] DCB conn 00: 00002030
nouveau [ DRM] DCB conn 01: 00000100
nouveau [ DRM] DCB conn 02: 00001261
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 2 available performance level(s)
nouveau [ DRM] 0: core 200MHz shader 400MHz memory 100MHz voltage 1000mV fanspeed 100%
nouveau [ DRM] 3: core 700MHz shader 1750MHz memory 1008MHz voltage 1100mV fanspeed 100%
nouveau [ DRM] c: core 400MHz shader 800MHz memory 601MHz voltage 1100mV fanspeed 59%
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-6:1.0
usbcore: registered new interface driver usb-storage
nouveau [ DRM] MM: using CRYPT for buffer copies
ata1.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:92:3d:8a:cd
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi3 : pata_amd
scsi4 : pata_amd
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
nouveau [ DRM] allocated 1440x900 fb: 0x70000, bo f60b8000
fbcon: nouveaufb (fb0) is primary device
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Console: switching to colour frame buffer device 180x56
nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:02:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 0
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ata3.00: ATA-7: ST3120814A, 2AAA, max UDMA/100
ata3.00: 234441648 sectors, multi 16: LBA48
ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:900:0x11)
ata3.00: configured for UDMA/100
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL02, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 3:0:0:0: Direct-Access ATA ST3120814A 2AAA PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
ata4: port disabled--ignoring
sd 3:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
scsi 2:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdc] 60566016 512-byte logical blocks: (31.0 GB/28.8 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 2b 00 00 08
sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI removable disk
squashfs: version 4.0 (2009/01/31) Phillip Lougher
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT2-fs (loop1): warning: mounting unchecked fs, running e2fsck is recommended
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[2094]: starting version 204
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
lp: driver loaded but no devices found
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-cups-reload main process (2220) terminated with status 1
ppdev: user-space parallel port driver
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:02.0: setting latency timer to 64
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:02.0: irq 23, io mem 0xdbffb000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
i2c i2c-10: nForce2 SMBus adapter at 0x5000
i2c i2c-11: nForce2 SMBus adapter at 0x6000
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
microcode: AMD CPU family 0xf not supported
usb 2-3: new low-speed USB device number 2 using ohci-pci
kvm: Nested Virtualization enabled
device-mapper: multipath: version 1.5.1 loaded
usb 2-3: New USB device found, idVendor=045e, idProduct=00dd
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Comfort Curve Keyboard 2000
usb 2-3: Manufacturer: Microsoft
usb 2-4: new low-speed USB device number 3 using ohci-pci
usb 2-4: New USB device found, idVendor=046d, idProduct=c404
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: Trackball
usb 2-4: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
hda_intel: Disabling MSI
snd_hda_intel 0000:00:05.0: setting latency timer to 64
hda-intel 0000:00:05.0: Disabling 64bit DMA
hda-intel 0000:00:05.0: Enable delay in RIRB handling
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
init: failsafe main process (2362) killed by TERM signal
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2
hid-generic 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:02.0-3/input0
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input3
hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:02.0-3/input1
input: Logitech Trackball as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input4
hid-generic 0003:046D:C404.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:02.0-4/input0
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
SKU: Nid=0x0 sku_cfg=0x0000f603
SKU: port_connectivity=0x0
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Rear Mic=0x18
Front Mic=0x19
Line=0x1a
CD=0x1c
realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0883
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0xe2d60 offMax=0xe2d60
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.16_Ubuntu (interface 0x001a0005).
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 2 device(s) ...
vboxpci: IOMMU not found (not registered)
init: alsa-restore main process (2773) terminated with status 19
Adding 1032716k swap on /dev/zram0. Priority:5 extents:1 across:1032716k SSFS
Adding 1032716k swap on /dev/zram1. Priority:5 extents:1 across:1032716k SSFS
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
forcedeth 0000:00:07.0 eth12: MSI enabled
vboxguest: PCI device not found, probably running on physical hardware.
perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000