dmesg - benchubuntu1310
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.6-20131025 (root@adminpri-HP-EliteBook-8570w) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #4 SMP Fri Oct 25 19:47:55 CEST 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd8fefff] usable
BIOS-e820: [mem 0x00000000bd8ff000-0x00000000bec7efff] reserved
BIOS-e820: [mem 0x00000000bec7f000-0x00000000bef5afff] usable
BIOS-e820: [mem 0x00000000bef5b000-0x00000000bef7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bef7f000-0x00000000beffefff] ACPI data
BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP EliteBook 8570w/176B, BIOS 68IAV Ver. F.42 07/15/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FF800000 mask FFF800000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask FC0000000 write-back
5 base 23E000000 mask FFE000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fcd000, 0x01fcdfff] PGTABLE
BRK [0x01fce000, 0x01fcefff] PGTABLE
BRK [0x01fcf000, 0x01fcffff] PGTABLE
init_memory_mapping: [mem 0x23de00000-0x23dffffff]
[mem 0x23de00000-0x23dffffff] page 2M
BRK [0x01fd0000, 0x01fd0fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23ddfffff]
[mem 0x23c000000-0x23ddfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbd8fefff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbd7fffff] page 2M
[mem 0xbd800000-0xbd8fefff] page 4k
init_memory_mapping: [mem 0xbec7f000-0xbef5afff]
[mem 0xbec7f000-0xbef5afff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
init_memory_mapping: [mem 0xbefff000-0xbeffffff]
[mem 0xbefff000-0xbeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x350aa000-0x3684cfff]
ACPI: RSDP 00000000000f2f10 00024 (v02 HPQOEM)
ACPI: XSDT 00000000beffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 00000000beffc000 0010C (v05 HPQOEM 176B 0000000F HP 00000001)
ACPI: DSDT 00000000befd6000 20720 (v02 HPQOEM 176B 00000001 INTL 20110112)
ACPI: FACS 00000000bec34000 00040
ACPI: HPET 00000000beffb000 00038 (v01 HPQOEM 176B 00000001 HP 00000001)
ACPI: APIC 00000000beffa000 000BC (v01 HPQOEM 176B 00000001 HP 00000001)
ACPI: MCFG 00000000beff9000 0003C (v01 HPQOEM 176B 00000001 HP 00000001)
ACPI: TCPA 00000000beff7000 00032 (v02 HPQOEM 176B 00000000 HP 00000001)
ACPI: SSDT 00000000befd3000 002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
ACPI: SSDT 00000000befd2000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
ACPI: FPDT 00000000befd0000 00044 (v01 HPQOEM 176B 00000001 HP 00000001)
ACPI: BGRT 00000000befcf000 00038 (v00 HPQOEM 176B 00000001 HP 00000001)
ACPI: SSDT 00000000befcc000 019EF (v01 HPQOEM NVIDIAGF 00000001 INTL 20110112)
ACPI: SSDT 00000000befcb000 009B6 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
ACPI: SSDT 00000000befca000 00AAD (v01 PmRef CpuPm 00003000 INTL 20110112)
ACPI: DMAR 00000000befc9000 00080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 00000000beff8000 000A5 (v32 HPQOEM 176B 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023dffffff]
Initmem setup node 0 [mem 0x00000000-0x23dffffff]
NODE_DATA [mem 0x23dff4000-0x23dff8fff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880235600000-ffff88023d5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbd8fefff]
node 0: [mem 0xbec7f000-0xbef5afff]
node 0: [mem 0xbefff000-0xbeffffff]
node 0: [mem 0x100000000-0x23dffffff]
On node 0 totalpages: 2079608
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12080 pages used for memmap
DMA32 zone: 773084 pages, LIFO batch:31
Normal zone: 20352 pages used for memmap
Normal zone: 1302528 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd8ff000-0xbec7efff]
PM: Registered nosave memory: [mem 0xbef5b000-0xbef7efff]
PM: Registered nosave memory: [mem 0xbef7f000-0xbeffefff]
PM: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88023dc00000 s86656 r8192 d23936 u262144
pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047091
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8079588K/8318432K available (7103K kernel code, 1078K rwdata, 3304K rodata, 1356K init, 1416K bss, 238844K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2693.788 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.57 BogoMIPS (lpj=10775152)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
Freeing SMP alternatives memory: 28K (ffffffff81e62000 - ffffffff81e69000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27607 entries in 108 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000bec0f000 end: 0x000000bec2efff
IOAPIC id 0 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (43100.60 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbef5b000-0xbef7efff] (147456 bytes)
regulator-dummy: no parameters
RTC time: 20:26:33, date: 10/25/13
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bec32018 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
ACPI: SSDT 00000000bec33a98 00303 (v01 PmRef ApIst 00003000 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20110112)
ACPI: SSDT 00000000bec31d98 00119 (v01 PmRef ApCst 00003000 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20110112)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [LPP] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd9420000-0xd942ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd9435000-0xd943500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd9400000-0xd941ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd943b000-0xd943bfff]
pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd943a000-0xd943a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd9430000-0xd9433fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd9439000-0xd94393ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x5068-0x506f]
pci 0000:00:1f.2: reg 0x14: [io 0x5074-0x5077]
pci 0000:00:1f.2: reg 0x18: [io 0x5060-0x5067]
pci 0000:00:1f.2: reg 0x1c: [io 0x5070-0x5073]
pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd9438000-0xd94387ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd9434000-0xd94340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
pci 0000:01:00.0: [10de:0ffc] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xd8ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xd9000000-0xd9003fff]
pci 0000:00:01.0: ASPM: Could not configure common clock
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd90fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xd9300000-0xd93fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03-23]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd7ffffff]
pci 0000:24:00.0: [197b:2380] type 00 class 0x0c0010
pci 0000:24:00.0: reg 0x10: [mem 0xd9200000-0xd92007ff]
pci 0000:24:00.0: reg 0x14: [mem 0xd9205000-0xd92050ff]
pci 0000:24:00.1: [197b:2392] type 00 class 0x088000
pci 0000:24:00.1: reg 0x10: [mem 0xd9204000-0xd92040ff]
pci 0000:24:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
pci 0000:24:00.2: [197b:2391] type 00 class 0x080501
pci 0000:24:00.2: reg 0x10: [mem 0xd9203000-0xd92030ff]
pci 0000:00:1c.2: PCI bridge to [bus 24]
pci 0000:00:1c.2: bridge window [mem 0xd9200000-0xd92fffff]
pci 0000:25:00.0: [8086:0082] type 00 class 0x028000
pci 0000:25:00.0: reg 0x10: [mem 0xd9100000-0xd9101fff 64bit]
pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
pci 0000:25:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 25]
pci 0000:00:1c.3: bridge window [mem 0xd9100000-0xd91fffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd8ff000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbef5b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23e000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io 0x0200-0x027f] has been reserved
system 00:06: [io 0x1000-0x100f] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0x0400-0x047f] could not be reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0xef80-0xef9f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:09: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:0a: Plug and Play ACPI device, IDs SYN019b SYN0100 SYN0002 PNP0f13 (active)
pnp 00:0b: Plug and Play ACPI device, IDs HPQ6000 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:24:00.1: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-23] add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd2000000-0xd21fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xd2200000-0xd22fffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd9080000-0xd90fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd90fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xd9300000-0xd93fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03-23]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd7ffffff]
pci 0000:00:1c.1: bridge window [mem 0xd2000000-0xd21fffff 64bit pref]
pci 0000:24:00.1: BAR 6: assigned [mem 0xd2200000-0xd2207fff pref]
pci 0000:00:1c.2: PCI bridge to [bus 24]
pci 0000:00:1c.2: bridge window [mem 0xd9200000-0xd92fffff]
pci 0000:00:1c.2: bridge window [mem 0xd2200000-0xd22fffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 25]
pci 0000:00:1c.3: bridge window [mem 0xd9100000-0xd91fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd90fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xd9300000-0xd93fffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xd4000000-0xd7ffffff]
pci_bus 0000:03: resource 2 [mem 0xd2000000-0xd21fffff 64bit pref]
pci_bus 0000:24: resource 1 [mem 0xd9200000-0xd92fffff]
pci_bus 0000:24: resource 2 [mem 0xd2200000-0xd22fffff pref]
pci_bus 0000:25: resource 1 [mem 0xd9100000-0xd91fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:14.0: enabling device (0000 -> 0002)
pci 0000:00:14.0: can't derive routing for PCI INT A
pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
pci 0000:00:14.0: can't derive routing for PCI INT A
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 24204K (ffff8800350aa000 - ffff88003684d000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb98ff000-0xbd8ff000] (64MB) mapped at [ffff8800b98ff000-ffff8800bd8fefff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1382732795.524:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15827
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 45 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
pci 0000:24:00.1: Signaling PME through PCIe PME interrupt
pci 0000:24:00.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:25:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 1e12 ss_vid 103c ss_did 176b
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (48 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (35 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (42 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (29 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (28 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (127 C)
thermal LNXTHERM:06: registered as thermal_zone6
ACPI: Thermal Zone [DM1Z] (0 C)
thermal LNXTHERM:07: registered as thermal_zone7
ACPI: Thermal Zone [DM2Z] (0 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd943a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.6-20131025 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 16, io mem 0xd9439000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.6-20131025 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 46 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.6-20131025 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.6-20131025 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 17ecb94892867636f076a8bdd38824e6475e8ec6'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 1:401:448
rtc_cmos 00:07: setting system clock to 2013-10-25 20:26:36 UTC (1382732796)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1356K (ffffffff81d0f000 - ffffffff81e62000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1076K (ffff8800016f3000 - ffff880001800000)
Freeing unused kernel memory: 792K (ffff880001b3a000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
systemd-udevd[146]: starting version 204
video: module verification failed: signature and/or required key missing - tainting kernel
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
sdhci-pci 0000:24:00.1: SDHCI controller found [197b:2392] (rev 30)
e1000e 0000:00:19.0: setting latency timer to 64
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
mmc0: SDHCI controller on PCI [0000:24:00.1] using DMA
sdhci-pci 0000:24:00.2: SDHCI controller found [197b:2391] (rev 30)
sdhci-pci 0000:24:00.2: Refusing to bind to secondary interface.
acpi device:02: registered as cooling_device8
ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
firewire_ohci 0000:24:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 2c:44:fd:65:df:cb
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
usb 1-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd9438000 port 0xd9438100 irq 48
ata2: SATA max UDMA/133 abar m2048@0xd9438000 port 0xd9438180 irq 48
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xd9438000 port 0xd9438280 irq 48
ata5: SATA max UDMA/133 abar m2048@0xd9438000 port 0xd9438300 irq 48
ata6: SATA max UDMA/133 abar m2048@0xd9438000 port 0xd9438380 irq 48
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-9: HGST HTS725050A7E630, GH2OA440, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HGST HTS725050A7 GH2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
firewire_core 0000:24:00.0: created device fw0: GUID ffe473fffffffffe, S400
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-1.1: SerialNumber: 0020901d3c91
tsc: Refined TSC clocksource calibration: 2693.880 MHz
usb 1-1.3: new high-speed USB device number 4 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATAPI: hp DVDRAM GT80N, R102, max UDMA/100
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp DVDRAM GT80N R102 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.3: New USB device found, idVendor=0461, idProduct=4dfe
usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-1.3: Product: HP HD Webcam [Fixed]
usb 1-1.3: Manufacturer: Primax Electronics Ltd.
usb 1-1.3: SerialNumber: PMX02
usb 2-1.6: new full-speed USB device number 3 using ehci-pci
usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: BCM20702A0
usb 2-1.6: Manufacturer: Broadcom Corp
usb 2-1.6: SerialNumber: 0C84DCE4C1B8
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
raid6: sse2x1 2890 MB/s
raid6: sse2x2 4008 MB/s
raid6: sse2x4 4717 MB/s
raid6: using algorithm sse2x4 (4717 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 9129.000 MB/sec
bio: create slab at 1
Btrfs loaded
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Adding 7811068k swap on /dev/sda5. Priority:-1 extents:1 across:7811068k FS
systemd-udevd[421]: starting version 204
cfg80211: Calling CRDA to update world regulatory domain
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x16
wmi: Mapper loaded
tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
lp: driver loaded but no devices found
device-mapper: multipath: version 1.5.1 loaded
[drm] Initialized drm 1.1.0 20060810
Linux video capture interface: v2.00
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
tpm_tis 00:03: TPM is disabled/deactivated (0x7)
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
hp_accel: laptop model unknown, using default axes configuration
usbcore: registered new interface driver btusb
lp0: using parport0 (interrupt-driven).
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:25:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:25:00.0: irq 50 for MSI/MSI-X
lis3lv02d: 8 bits 3DC sensor found
uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (0461:4dfe)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
iwlwifi 0000:25:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
mute LED gpio 1 polarity 0
autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0xc
Internal Mic=0x11
Line=0xf
autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x16
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ppdev: user-space parallel port driver
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HP WMI hotkeys as /devices/virtual/input/input10
type=1400 audit(1382732808.272:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=604 comm="apparmor_parser"
type=1400 audit(1382732808.272:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=603 comm="apparmor_parser"
type=1400 audit(1382732808.272:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=612 comm="apparmor_parser"
type=1400 audit(1382732808.272:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=604 comm="apparmor_parser"
type=1400 audit(1382732808.272:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=603 comm="apparmor_parser"
type=1400 audit(1382732808.272:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=612 comm="apparmor_parser"
type=1400 audit(1382732808.272:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=604 comm="apparmor_parser"
type=1400 audit(1382732808.272:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=603 comm="apparmor_parser"
type=1400 audit(1382732808.272:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=612 comm="apparmor_parser"
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input13
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.32 Wed Jun 19 15:51:20 PDT 2013
psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26c00, board id: 2009, fw id: 1119621
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (799) killed by TERM signal
type=1400 audit(1382732810.508:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=866 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (926) terminated with status 1
init: udev-fallback-graphics main process (945) terminated with status 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
wlan0: authenticate with 00:19:70:28:9c:ae
wlan0: send auth to 00:19:70:28:9c:ae (try 1/3)
wlan0: authenticated
wlan0: associate with 00:19:70:28:9c:ae (try 1/3)
wlan0: RX AssocResp from 00:19:70:28:9c:ae (capab=0x431 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
Netfilter messages via NETLINK v0.30.
device wlan0 entered promiscuous mode
device wlan0 left promiscuous mode
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)