dmesg - firstrun
CPU0 microcode updated early to revision 0xe, date = 2013-06-26
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10-3-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
Command line: BOOT_IMAGE=/vmlinuz-3.10-3-amd64 root=/dev/mapper/tp--tre-root ro quiet pcie_aspm=force
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76afff] usable
BIOS-e820: [mem 0x00000000bb76b000-0x00000000bb776fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb777000-0x00000000bb779fff] ACPI data
BIOS-e820: [mem 0x00000000bb77a000-0x00000000bb780fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb781000-0x00000000bb781fff] ACPI data
BIOS-e820: [mem 0x00000000bb782000-0x00000000bb78afff] ACPI NVS
BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: LENOVO 2904FYG/2904FYG, BIOS 6UET53WW (1.33 ) 09/02/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DBFFF uncachable
DC000-FFFFF write-protect
MTRR variable ranges enabled:
0 disabled
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 138000000 mask FF8000000 uncachable
5 base 0BC000000 mask FFC000000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f68e0-0x000f68ef] mapped at [ffff8800000f68e0]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0186e000, 0x0186efff] PGTABLE
BRK [0x0186f000, 0x0186ffff] PGTABLE
BRK [0x01870000, 0x01870fff] PGTABLE
init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[mem 0x137e00000-0x137ffffff] page 2M
BRK [0x01871000, 0x01871fff] PGTABLE
init_memory_mapping: [mem 0x134000000-0x137dfffff]
[mem 0x134000000-0x137dfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x133ffffff]
[mem 0x100000000-0x133ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbb27bfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbb1fffff] page 2M
[mem 0xbb200000-0xbb27bfff] page 4k
init_memory_mapping: [mem 0xbb282000-0xbb35efff]
[mem 0xbb282000-0xbb35efff] page 4k
init_memory_mapping: [mem 0xbb40f000-0xbb46efff]
[mem 0xbb40f000-0xbb46efff] page 4k
BRK [0x01872000, 0x01872fff] PGTABLE
init_memory_mapping: [mem 0xbb70f000-0xbb716fff]
[mem 0xbb70f000-0xbb716fff] page 4k
BRK [0x01873000, 0x01873fff] PGTABLE
init_memory_mapping: [mem 0xbb71f000-0xbb76afff]
[mem 0xbb71f000-0xbb76afff] page 4k
init_memory_mapping: [mem 0xbb7ff000-0xbb7fffff]
[mem 0xbb7ff000-0xbb7fffff] page 4k
RAMDISK: [mem 0x363fc000-0x371f5fff]
ACPI: RSDP 00000000000f68a0 00024 (v02 LENOVO)
ACPI: XSDT 00000000bb7ef2c4 0009C (v01 LENOVO TP-6U 00001330 LTP 00000000)
ACPI: FACP 00000000bb7ef400 000F4 (v04 LENOVO TP-6U 00001330 LNVO 00000001)
ACPI: DSDT 00000000bb7ef7d1 0F36C (v01 LENOVO TP-6U 00001330 MSFT 03000001)
ACPI: FACS 00000000bb6e7000 00040
ACPI: SSDT 00000000bb7ef5b4 0021D (v01 LENOVO TP-6U 00001330 MSFT 03000001)
ACPI: ECDT 00000000bb7feb3d 00052 (v01 LENOVO TP-6U 00001330 LNVO 00000001)
ACPI: APIC 00000000bb7feb8f 00084 (v01 LENOVO TP-6U 00001330 LNVO 00000001)
ACPI: MCFG 00000000bb7fec4b 0003C (v01 LENOVO TP-6U 00001330 LNVO 00000001)
ACPI: HPET 00000000bb7fec87 00038 (v01 LENOVO TP-6U 00001330 LNVO 00000001)
ACPI: ASF! 00000000bb7fedbe 000A4 (v16 LENOVO TP-6U 00001330 PTL 00000001)
ACPI: SLIC 00000000bb7fee62 00176 (v01 LENOVO TP-6U 00001330 LTP 00000000)
ACPI: BOOT 00000000bb7fefd8 00028 (v01 LENOVO TP-6U 00001330 LTP 00000001)
ACPI: SSDT 00000000bb6e591a 0084B (v01 LENOVO TP-6U 00001330 INTL 20050513)
ACPI: TCPA 00000000bb78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
ACPI: DMAR 00000000bb781000 000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
ACPI: SSDT 00000000bb779000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 00000000bb778000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 00000000bb777000 0049F (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
Initmem setup node 0 [mem 0x00000000-0x137ffffff]
NODE_DATA [mem 0x137ff9000-0x137ffcfff]
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133800000-ffff880136ffffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x137ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbb27bfff]
node 0: [mem 0xbb282000-0xbb35efff]
node 0: [mem 0xbb40f000-0xbb46efff]
node 0: [mem 0xbb70f000-0xbb716fff]
node 0: [mem 0xbb71f000-0xbb76afff]
node 0: [mem 0xbb7ff000-0xbb7fffff]
node 0: [mem 0x100000000-0x137ffffff]
On node 0 totalpages: 996267
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 10431 pages used for memmap
DMA32 zone: 762894 pages, LIFO batch:31
Normal zone: 3136 pages used for memmap
Normal zone: 229376 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
PM: Registered nosave memory: 00000000bb27c000 - 00000000bb282000
PM: Registered nosave memory: 00000000bb35f000 - 00000000bb371000
PM: Registered nosave memory: 00000000bb371000 - 00000000bb3f2000
PM: Registered nosave memory: 00000000bb3f2000 - 00000000bb40f000
PM: Registered nosave memory: 00000000bb46f000 - 00000000bb668000
PM: Registered nosave memory: 00000000bb668000 - 00000000bb6e8000
PM: Registered nosave memory: 00000000bb6e8000 - 00000000bb70f000
PM: Registered nosave memory: 00000000bb717000 - 00000000bb71f000
PM: Registered nosave memory: 00000000bb76b000 - 00000000bb777000
PM: Registered nosave memory: 00000000bb777000 - 00000000bb77a000
PM: Registered nosave memory: 00000000bb77a000 - 00000000bb781000
PM: Registered nosave memory: 00000000bb781000 - 00000000bb782000
PM: Registered nosave memory: 00000000bb782000 - 00000000bb78b000
PM: Registered nosave memory: 00000000bb78b000 - 00000000bb78c000
PM: Registered nosave memory: 00000000bb78c000 - 00000000bb79f000
PM: Registered nosave memory: 00000000bb79f000 - 00000000bb7ff000
PM: Registered nosave memory: 00000000bb800000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s84928 r8192 d21568 u524288
pcpu-alloc: s84928 r8192 d21568 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 982623
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10-3-amd64 root=/dev/mapper/tp--tre-root ro quiet pcie_aspm=force
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3837888k/5111808k available (3643k kernel code, 1126740k absent, 147180k reserved, 3126k data, 920k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
NR_IRQS:33024 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.036 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.07 BogoMIPS (lpj=9576144)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
dmar: DRHD base: 0x000000fed91000 flags: 0x0
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
dmar: DRHD base: 0x000000fed93000 flags: 0x1
dmar: IOMMU 2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
dmar: RMRR base: 0x000000bb6e9000 end: 0x000000bb6fffff
dmar: RMRR base: 0x000000bde00000 end: 0x000000bfffffff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (fam: 06, model: 25, stepping: 02)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2 microcode updated early to revision 0xe, date = 2013-06-26
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19152.28 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
PM: Registering ACPI NVS region [mem 0xbb76b000-0xbb776fff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xbb77a000-0xbb780fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbb782000-0xbb78afff] (36864 bytes)
PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bb71aa18 0046F (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0046F (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT 00000000bb718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: SSDT 00000000bb719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: SSDT 00000000bb717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 2 docks/bays found
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc3fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xfc627800-0xfc62780f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
pci 0000:00:16.3: reg 10: [io 0x1808-0x180f]
pci 0000:00:16.3: reg 14: [mem 0xfc624000-0xfc624fff]
pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xfc600000-0xfc61ffff]
pci 0000:00:19.0: reg 14: [mem 0xfc625000-0xfc625fff]
pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xfc628000-0xfc6283ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b57] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfc620000-0xfc623fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xfc628400-0xfc6287ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b0f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x1860-0x1867]
pci 0000:00:1f.2: reg 14: [io 0x1814-0x1817]
pci 0000:00:1f.2: reg 18: [io 0x1818-0x181f]
pci 0000:00:1f.2: reg 1c: [io 0x1810-0x1813]
pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
pci 0000:00:1f.2: reg 24: [mem 0xfc627000-0xfc6277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xfc628800-0xfc6288ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 10: [mem 0xfc626000-0xfc626fff 64bit]
pci 0000:01:00.0: [10de:0a6c] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf8100000-0xf8101fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:05:00.0: [1180:e822] type 00 class 0x080500
pci 0000:05:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:05:00.0: reg 10: [mem 0xf8200000-0xf82000ff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05-0c]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf8200000-0xfbffffff]
pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: Enabled 3 GPEs in block 00 to 3F
acpi root: \_SB_.UNCR notify handler is installed
acpi root: \_SB_.PCI0 notify handler is installed
Found 2 acpi root devices
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb76b000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1180-0x11ff] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x1641] has been reserved
system 00:01: [io 0x1644-0x167f] could not be reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-0c]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf8200000-0xfbffffff]
pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0e]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf8100000-0xf81fffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf8200000-0xfbffffff]
pci_bus 0000:05: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14312k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1382506781.528:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7523
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
0000:00:16.3: ttyS0 at I/O 0x1808 (irq = 17) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 131072K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2013-10-23 05:39:42 UTC (1382506782)
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 444k freed
Freeing unused kernel memory: 492k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
systemd-udevd[70]: starting version 204
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
usbcore: registered new device driver usb
[drm] Initialized drm 1.1.0 20060810
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfc628000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 19, io mem 0xfc628400
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (48 C)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:05:00.0: SDHCI controller found [1180:e822] (rev 1)
sdhci-pci 0000:05:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:05:00.0] using DMA
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:26:2d:f6:ee:8e
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
usb 1-1: new high-speed USB device number 2 using ehci-pci
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2394.003 MHz
Switching to clocksource tsc
usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: Biometric Coprocessor
usb 1-1.3: Manufacturer: UPEK
Console: switching to colour frame buffer device 180x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:02: registered as cooling_device0
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
acpi device:0c: registered as cooling_device1
ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
usb 1-1.4: new full-speed USB device number 4 using ehci-pci
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc627000 port 0xfc627100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xfc627000 port 0xfc627180 irq 43
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfc627000 port 0xfc627300 irq 43
ata6: SATA max UDMA/133 abar m2048@0xfc627000 port 0xfc627380 irq 43
usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Broadcom Bluetooth Device
usb 1-1.4: Manufacturer: Broadcom Corp
usb 1-1.4: SerialNumber: 78DD08B7D23C
usb 1-1.6: new high-speed USB device number 5 using ehci-pci
usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480d
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Integrated Camera
usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: TOSHIBA THNS128GG4BAAA-NonFDE, AGLA0203, max UDMA/100
ata1.00: 250069680 sectors, multi 16: LBA48
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNS128G AGLA PQ: 0 ANSI: 5
usb 2-1.4: new high-speed USB device number 3 using ehci-pci
usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0
usb 2-1.4: config 1 has no interface number 0
usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204
usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 2-1.4: Product: Qualcomm Gobi 2000
usb 2-1.4: Manufacturer: Qualcomm Incorporated
usb 2-1.8: new full-speed USB device number 4 using ehci-pci
usb 2-1.8: New USB device found, idVendor=1b96, idProduct=0001
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: DuoSense
usb 2-1.8: Manufacturer: N-trig
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ATAPI: Optiarc DVD RW AD-7930H, 1.D0, max UDMA/100
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7930H 1.D0 PQ: 0 ANSI: 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
bio: create slab at 1
bio: create slab at 1
PM: Starting manual resume from disk
PM: Hibernation image partition 253:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
PM: Marking nosave pages: [mem 0xbb27c000-0xbb281fff]
PM: Marking nosave pages: [mem 0xbb35f000-0xbb40efff]
PM: Marking nosave pages: [mem 0xbb46f000-0xbb70efff]
PM: Marking nosave pages: [mem 0xbb717000-0xbb71efff]
PM: Marking nosave pages: [mem 0xbb76b000-0xbb7fefff]
PM: Marking nosave pages: [mem 0xbb800000-0xffffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-1): mounted filesystem with ordered data mode
systemd-udevd[505]: starting version 204
ACPI: Requesting acpi_cpufreq
wmi: Mapper loaded
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 6UET53WW (1.33 ), EC 6UHT30WW-1.11
thinkpad_acpi: Lenovo ThinkPad T410s, model 2904FYG
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (on-line)
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
cfg80211: Calling CRDA to update world regulatory domain
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
input: PC Speaker as /devices/platform/pcspkr/input/input7
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
microcode: CPU0 sig=0x20652, pf=0x10, revision=0xe
hda_codec: CX20585: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
platform microcode: firmware: agent loaded intel-ucode/06-25-02 into memory
microcode: CPU1 sig=0x20652, pf=0x10, revision=0xe
platform microcode: firmware: agent loaded intel-ucode/06-25-02 into memory
microcode: CPU2 sig=0x20652, pf=0x10, revision=0xe
platform microcode: firmware: agent loaded intel-ucode/06-25-02 into memory
microcode: CPU3 sig=0x20652, pf=0x10, revision=0xe
platform microcode: firmware: agent loaded intel-ucode/06-25-02 into memory
microcode: Microcode Update Driver: v2.00 , Peter Oruba
iwlwifi 0000:03:00.0: firmware: agent loaded iwlwifi-6000-4.ucode into memory
iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
tpm_tis 00:09: TPM is disabled/deactivated (0x6)
input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a QS57 TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input18
ntrig 0003:1B96:0001.0001: hidraw0: USB HID v1.10 Device [N-trig DuoSense] on usb-0000:00:1d.0-1.8/input0
ntrig 0003:1B96:0001.0001: Firmware version: 4.7.17.20.7 (1e08 8f22)
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
input: N-Trig Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input19
input: N-Trig MultiTouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input20
input: N-Trig Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input21
ntrig 0003:1B96:0001.0002: input,hidraw1: USB HID v1.10 Device [N-trig DuoSense] on usb-0000:00:1d.0-1.8/input1
ntrig 0003:1B96:0001.0002: Firmware version: 4.7.17.20.7 (1e08 8f22)
usbcore: registered new interface driver qcserial
qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480d)
usbcore: registered new interface driver btusb
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input22
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EXT3-fs (dm-1): using internal journal
fuse init (API version 7.22)
loop: module loaded
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 1 device(s) ...
Adding 3903484k swap on /dev/mapper/tp--tre-swap. Priority:-1 extents:1 across:3903484k SS
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-5): using internal journal
EXT3-fs (dm-5): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-3): using internal journal
EXT3-fs (dm-3): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-4): using internal journal
EXT3-fs (dm-4): mounted filesystem with ordered data mode
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
thinkpad_ec: thinkpad_ec 0.41 loaded.
hdaps: LENOVO ThinkPad T410 detected, setting orientation 1
hdaps: initial mode latch is 0x05
hdaps: setting ec_rate=250, filter_order=2
hdaps: device successfully initialized.
input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input23
input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input24
hdaps: driver successfully loaded.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input25
psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
bbswitch: version 0.7
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VID_
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG_.VID_
bbswitch: detected an Optimus _DSM function
pci 0000:01:00.0: enabling device (0104 -> 0107)
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
bbswitch: disabling discrete graphics
pci 0000:01:00.0: power state changed by ACPI to D3cold
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input26
usb 2-1.4: USB disconnect, device number 3
qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
qcserial 2-1.4:1.1: device disconnected
usb 2-1.4: new high-speed USB device number 5 using ehci-pci
usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205
usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 2-1.4: Product: Qualcomm Gobi 2000
usb 2-1.4: Manufacturer: Qualcomm Incorporated
qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
usbcore: registered new interface driver cdc_wdm
qmi_wwan 2-1.4:1.0: cdc-wdm0: USB WDM device
qmi_wwan 2-1.4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.4, WWAN/QMI device, a2:ca:0e:9f:40:ab
usbcore: registered new interface driver qmi_wwan
wlan0: authenticate with 2c:3f:38:5a:a9:a7
wlan0: send auth to 2c:3f:38:5a:a9:a7 (try 1/3)
wlan0: authenticated
iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:3f:38:5a:a9:a7 (try 1/3)
wlan0: RX AssocResp from 2c:3f:38:5a:a9:a7 (capab=0x11 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
wlan0: authenticate with 2c:3f:38:5a:a9:a8
wlan0: send auth to 2c:3f:38:5a:a9:a8 (try 1/3)
cfg80211: Calling CRDA for country: DE
wlan0: authenticated
iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: waiting for beacon from 2c:3f:38:5a:a9:a8
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: associate with 2c:3f:38:5a:a9:a8 (try 1/3)
wlan0: RX AssocResp from 2c:3f:38:5a:a9:a8 (capab=0x431 status=0 aid=46)
wlan0: associated
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: deauthenticating from 2c:3f:38:5a:a9:a8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered