dmesg - g
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10-3-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
Command line: initrd=/live/initrd.img boot=live config quiet BOOT_IMAGE=/live/vmlinuz
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/Rampage III GENE, BIOS 1003 09/20/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 1C0000000 mask FC0000000 uncachable
1 base 000000000 mask E00000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BF800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0186e000, 0x0186efff] PGTABLE
BRK [0x0186f000, 0x0186ffff] PGTABLE
BRK [0x01870000, 0x01870fff] PGTABLE
init_memory_mapping: [mem 0x1bfe00000-0x1bfffffff]
[mem 0x1bfe00000-0x1bfffffff] page 2M
BRK [0x01871000, 0x01871fff] PGTABLE
init_memory_mapping: [mem 0x1bc000000-0x1bfdfffff]
[mem 0x1bc000000-0x1bfdfffff] page 2M
init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[mem 0x180000000-0x1bbffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbf5fffff] page 2M
[mem 0xbf600000-0xbf77ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
[mem 0x100000000-0x17fffffff] page 2M
BRK [0x01872000, 0x01872fff] PGTABLE
BRK [0x01873000, 0x01873fff] PGTABLE
RAMDISK: [mem 0x7ef74000-0x7fffefff]
ACPI: RSDP 00000000000fb070 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf780100 0005C (v01 092011 XSDT2002 20110920 MSFT 00000097)
ACPI: FACP 00000000bf780290 000F4 (v03 092011 FACP2002 20110920 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 0C7C7 (v01 A1648 A1648000 00000000 INTL 20060113)
ACPI: FACS 00000000bf798000 00040
ACPI: APIC 00000000bf780390 000D8 (v01 092011 APIC2002 20110920 MSFT 00000097)
ACPI: MCFG 00000000bf780470 0003C (v01 092011 OEMMCFG 20110920 MSFT 00000097)
ACPI: OEMB 00000000bf798040 00072 (v01 092011 OEMB2002 20110920 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 00038 (v01 092011 OEMHPET 20110920 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 000B0 (v01 092011 OEMOSFR 20110920 MSFT 00000097)
ACPI: SSDT 00000000bf79a300 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001bfffffff]
Initmem setup node 0 [mem 0x00000000-0x1bfffffff]
NODE_DATA [mem 0x1bfff9000-0x1bfffcfff]
[ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9600000-ffff8801be9fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1bfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbf77ffff]
node 0: [mem 0x100000000-0x1bfffffff]
On node 0 totalpages: 1570589
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 10667 pages used for memmap
DMA32 zone: 780160 pages, LIFO batch:31
Normal zone: 10752 pages used for memmap
Normal zone: 786432 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
PM: Registered nosave memory: 00000000bf780000 - 00000000bf798000
PM: Registered nosave memory: 00000000bf798000 - 00000000bf7da000
PM: Registered nosave memory: 00000000bf7da000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8801bfc00000 s84928 r8192 d21568 u131072
pcpu-alloc: s84928 r8192 d21568 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1549093
Policy zone: Normal
Kernel command line: initrd=/live/initrd.img boot=live config quiet BOOT_IMAGE=/live/vmlinuz
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6102540k/7340032k available (3643k kernel code, 1057676k absent, 179816k reserved, 3126k data, 920k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
NR_IRQS:33024 nr_irqs:1216 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3070.415 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6140.83 BogoMIPS (lpj=12281660)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
Brought up 8 CPUs
smpboot: Total of 8 processors activated (49126.64 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf7980c0 0223C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0223C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:19.0: [8086:10ce] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xf7de0000-0xf7dfffff]
pci 0000:00:19.0: reg 14: [mem 0xf7ddf000-0xf7ddffff]
pci 0000:00:19.0: reg 18: [io 0xbc00-0xbc1f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xf7dde000-0xf7dde3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7dd8000-0xf7ddbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xb000-0xb01f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xf7ddd000-0xf7ddd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xa880-0xa887]
pci 0000:00:1f.2: reg 14: [io 0xa800-0xa803]
pci 0000:00:1f.2: reg 18: [io 0xa480-0xa487]
pci 0000:00:1f.2: reg 1c: [io 0xa400-0xa403]
pci 0000:00:1f.2: reg 20: [io 0xa080-0xa09f]
pci 0000:00:1f.2: reg 24: [mem 0xf7dd7000-0xf7dd77ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7ddc000-0xf7ddc0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
pci 0000:01:00.0: reg 10: [io 0xcc00-0xcc07]
pci 0000:01:00.0: reg 14: [io 0xc880-0xc883]
pci 0000:01:00.0: reg 18: [io 0xc800-0xc807]
pci 0000:01:00.0: reg 1c: [io 0xc480-0xc483]
pci 0000:01:00.0: reg 20: [io 0xc400-0xc40f]
pci 0000:01:00.0: reg 24: [mem 0xf7eff800-0xf7efffff]
pci 0000:01:00.0: reg 30: [mem 0xf7ee0000-0xf7eeffff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 10: [mem 0xf7ffe000-0xf7ffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:03:00.0: [10de:1200] type 00 class 0x030000
pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io 0xdc00-0xdc7f]
pci 0000:03:00.0: reg 30: [mem 0xfbd00000-0xfbd7ffff pref]
pci 0000:03:00.1: [10de:0e0c] type 00 class 0x040300
pci 0000:03:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbdfffff]
pci 0000:00:03.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:05:00.0: reg 10: [mem 0xfbeff000-0xfbeff7ff 64bit]
pci 0000:05:00.0: reg 18: [io 0xe800-0xe8ff]
pci 0000:05:00.0: supports D2
pci 0000:05:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0290-0x029f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0500-0x057f] could not be reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbdfffff]
pci 0000:00:03.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbdfffff]
pci_bus 0000:03: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 16940k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
audit: initializing netlink socket (disabled)
type=2000 audit(1380902516.648:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 11952
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2013-10-04 16:01:57 UTC (1380902517)
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 444k freed
Freeing unused kernel memory: 492k freed
systemd-udevd[93]: starting version 204
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
usbcore: registered new device driver usb
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
e1000e 0000:00:19.0: setting latency timer to 64
ehci-pci: EHCI PCI platform driver
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
e1000e 0000:00:19.0: irq 66 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.10-3-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:02:00.0
uhci_hcd: USB Universal Host Controller Interface driver
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
ACPI: bus type ATA registered
libata version 3.00 loaded.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.10-3-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) bc:ae:c5:06:f6:b5
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7dde000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.7
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7ddd000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b480
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.10-3-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b800
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.10-3-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1a.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.10-3-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1a.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.10-3-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b080
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: UHCI Host Controller
usb usb9: Manufacturer: Linux 3.10-3-amd64 uhci_hcd
usb usb9: SerialNumber: 0000:00:1d.1
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: UHCI Host Controller
usb usb10: Manufacturer: Linux 3.10-3-amd64 uhci_hcd
usb usb10: SerialNumber: 0000:00:1d.2
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 75 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7dd7000 port 0xf7dd7100 irq 75
ata2: SATA max UDMA/133 abar m2048@0xf7dd7000 port 0xf7dd7180 irq 75
ata3: SATA max UDMA/133 abar m2048@0xf7dd7000 port 0xf7dd7200 irq 75
ata4: SATA max UDMA/133 abar m2048@0xf7dd7000 port 0xf7dd7280 irq 75
ata5: SATA max UDMA/133 abar m2048@0xf7dd7000 port 0xf7dd7300 irq 75
ata6: SATA max UDMA/133 abar m2048@0xf7dd7000 port 0xf7dd7380 irq 75
ahci 0000:01:00.0: irq 76 for MSI/MSI-X
ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq fbs pio
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
ata7: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7eff900 irq 76
ata8: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7eff980 irq 76
ata9: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effa00 irq 76
ata10: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effa80 irq 76
ata11: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effb00 irq 76
ata12: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effb80 irq 76
ata13: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effc00 irq 76
ata14: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effc80 irq 76
firewire_core 0000:05:00.0: created device fw0: GUID 001fc6000005e1e8, S400
ata13: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
ata7: SATA link down (SStatus 0 SControl 300)
usb 10-1: new low-speed USB device number 2 using uhci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
usb 10-1: New USB device found, idVendor=045e, idProduct=00f9
usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-1: Product: Microsoft Wireless Desktop Receiver 3.1
usb 10-1: Manufacturer: Microsft
hidraw: raw HID events driver (C) Jiri Kosina
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3070.499 MHz
Switching to clocksource tsc
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/input/input0
microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input0
microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.1/input/input1
microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input1
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
scsi 13:0:0:0: Attached scsi generic sg2 type 3
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
aufs: module is from the staging directory, the quality is unknown, you have been warned.
aufs 3.10-20130826
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs test_add:294:busybox[385]: uid/gid/perm //filesystem.squashfs/ 0/0/0777, 0/0/0755
systemd-udevd[906]: starting version 204
wmi: Mapper loaded
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
EDAC MC: Ver: 3.0.0
ACPI: Requesting acpi_cpufreq
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[drm] Initialized drm 1.1.0 20060810
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x15
input: PC Speaker as /devices/platform/pcspkr/input/input4
platform microcode: firmware: agent loaded intel-ucode/06-1a-05 into memory
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU0 updated to revision 0x19, date = 2013-06-21
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-1a-05 into memory
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU1 updated to revision 0x19, date = 2013-06-21
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-1a-05 into memory
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU2 updated to revision 0x19, date = 2013-06-21
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-1a-05 into memory
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU3 updated to revision 0x19, date = 2013-06-21
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-1a-05 into memory
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU4 updated to revision 0x19, date = 2013-06-21
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-1a-05 into memory
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU5 updated to revision 0x19, date = 2013-06-21
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-1a-05 into memory
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU6 updated to revision 0x19, date = 2013-06-21
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-1a-05 into memory
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU7 updated to revision 0x19, date = 2013-06-21
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20130328/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.GPS0 2 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SBG6 1 (20130328/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 2 (20130328/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.GPS0 3 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda_intel: Disabling MSI
hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
iTCO_vendor_support: vendor-support=0
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
MXM: GUID detected in BIOS
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0ce000a1
nouveau [ DEVICE][0000:03:00.0] Chipset: GF114 (NVCE)
nouveau [ DEVICE][0000:03:00.0] Family : NVC0
nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:03:00.0] BIT signature found
nouveau [ VBIOS][0000:03:00.0] version 70.24.11.00.01
nouveau [ PFB][0000:03:00.0] RAM type: GDDR5
nouveau [ PFB][0000:03:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
nouveau [ PTHERM][0000:03:00.0] FAN control: PWM
nouveau [ PTHERM][0000:03:00.0] fan management: disabled
nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[TTM] Zone kernel: Available graphics memory: 3060674 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
mtrr: type mismatch for d8000000,8000000 old: write-back new: write-combining
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000300 00000000
nouveau [ DRM] DCB outp 01: 01000302 00020030
nouveau [ DRM] DCB outp 02: 04011380 00000000
nouveau [ DRM] DCB outp 03: 08011382 00020030
nouveau [ DRM] DCB outp 04: 02022362 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00010130
nouveau [ DRM] DCB conn 02: 00002261
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 3 available performance level(s)
nouveau [ DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 950mV
nouveau [ DRM] 1: core 405MHz shader 810MHz memory 324MHz voltage 950mV
nouveau [ DRM] 3: core 900MHz shader 1800MHz memory 2004MHz voltage 962mV-1050mV
nouveau [ DRM] c: core 50MHz shader 101MHz memory 135MHz voltage 950mV fanspeed 55%
nouveau [ DRM] MM: using COPY0 for buffer copies
nouveau [ DRM] allocated 1920x1080 fb: 0x60000, bo ffff8801b4984400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:03:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
fuse init (API version 7.22)
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
e1000e 0000:00:19.0: irq 66 for MSI/MSI-X
e1000e 0000:00:19.0: irq 66 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 66 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Link Status Change
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready