dmesg - sat11
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-41-generic (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #64~precise1-Ubuntu SMP Thu Sep 12 16:50:04 UTC 2013 (Ubuntu 3.5.0-41.64~precise1-generic 3.5.7.21)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c83e0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c83e1000-0x00000000c83e7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c83e8000-0x00000000c8cb1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8cb2000-0x00000000c90a1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c90a2000-0x00000000d91d9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d91da000-0x00000000d9276fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9277000-0x00000000d92d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d92d6000-0x00000000d9404fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d9405000-0x00000000d9ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dc000000-0x00000000de1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Supermicro X10SAE/X10SAE, BIOS 1.1 08/13/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 021FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3520MB, range: 64MB, type UC
[ 0.000000] reg 4, base: 8702MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 8126M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 3520MB, range: 64MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 8702MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [ffff8800000fd800]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xd9ffffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xd9ffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xd9ffffff @ [mem 0x1fffe000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fdfffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] [mem 0x200000000-0x21fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x21fdfffff @ [mem 0xd92d4000-0xd92d5fff]
[ 0.000000] RAMDISK: [mem 0x361fa000-0x370f4fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 SUPERM)
[ 0.000000] ACPI: XSDT 00000000d93de098 000AC (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000d93e9e28 0010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000d93de1d8 0BC4B (v02 SUPERM SMCI--MB 00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 00000000d9403080 00040
[ 0.000000] ACPI: APIC 00000000d93e9f38 00092 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000d93e9fd0 00044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000d93ea018 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000d93ea558 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000d93eb030 002DE (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000d93eb310 00348 (v01 PmRef ApTst 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 00000000d93eb658 0003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000d93eb698 00038 (v01 SUPERM SMCI--MB 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000d93eb6d0 00397 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000d93eba68 032DD (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: ASF! 00000000d93eed48 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 00000000d93eedf0 000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 00000000d93eeea8 00130 (v01 AMI AMI EINJ 00000000 00000000)
[ 0.000000] ACPI: ERST 00000000d93eefd8 00230 (v01 AMIER AMI ERST 00000000 00000000)
[ 0.000000] ACPI: HEST 00000000d93ef208 000A8 (v01 AMI AMI HEST 00000000 00000000)
[ 0.000000] ACPI: BERT 00000000d93ef2b0 00030 (v01 AMI AMI BERT 00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fdfffff]
[ 0.000000] NODE_DATA [mem 0x21fdfc000-0x21fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217400000-ffff88021f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xc83e0fff]
[ 0.000000] node 0: [mem 0xc83e8000-0xc8cb1fff]
[ 0.000000] node 0: [mem 0xc90a2000-0xd91d9fff]
[ 0.000000] node 0: [mem 0xd9277000-0xd92d5fff]
[ 0.000000] node 0: [mem 0xd9fff000-0xd9ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21fdfffff]
[ 0.000000] On node 0 totalpages: 2067408
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 867971 pages, LIFO batch:31
[ 0.000000] Normal zone: 18424 pages used for memmap
[ 0.000000] Normal zone: 1160712 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c83e1000 - 00000000c83e8000
[ 0.000000] PM: Registered nosave memory: 00000000c8cb2000 - 00000000c90a2000
[ 0.000000] PM: Registered nosave memory: 00000000d91da000 - 00000000d9277000
[ 0.000000] PM: Registered nosave memory: 00000000d92d6000 - 00000000d9405000
[ 0.000000] PM: Registered nosave memory: 00000000d9405000 - 00000000d9fff000
[ 0.000000] PM: Registered nosave memory: 00000000da000000 - 00000000dc000000
[ 0.000000] PM: Registered nosave memory: 00000000dc000000 - 00000000de200000
[ 0.000000] PM: Registered nosave memory: 00000000de200000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xde200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fa00000 s83584 r8192 d22912 u262144
[ 0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2032594
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8040404k/8910848k available (6827k kernel code, 641216k absent, 229228k reserved, 6342k data, 948k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.004000] TSC: PIT calibration matches HPET. 1 loops
[ 0.004000] Detected 3399.763 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.52 BogoMIPS (lpj=13599052)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000017] Security Framework initialized
[ 0.000024] AppArmor: AppArmor initialized
[ 0.000025] Yama: becoming mindful.
[ 0.000354] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001394] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001824] Mount-cache hash table entries: 256
[ 0.001930] Initializing cgroup subsys cpuacct
[ 0.001931] Initializing cgroup subsys memory
[ 0.001936] Initializing cgroup subsys devices
[ 0.001937] Initializing cgroup subsys freezer
[ 0.001938] Initializing cgroup subsys blkio
[ 0.001939] Initializing cgroup subsys perf_event
[ 0.001956] CPU: Physical Processor ID: 0
[ 0.001957] CPU: Processor Core ID: 0
[ 0.001960] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001960] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002693] mce: CPU supports 9 MCE banks
[ 0.002704] CPU0: Thermal monitoring enabled (TM1)
[ 0.002711] using mwait in idle threads.
[ 0.003866] ACPI: Core revision 20120320
[ 0.011200] ftrace: allocating 27640 entries in 108 pages
[ 0.019162] DMAR: Host address width 39
[ 0.019164] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.019169] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.019170] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.019173] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.019174] DMAR: RMRR base: 0x000000d9ea8000 end: 0x000000d9eb6fff
[ 0.019175] DMAR: RMRR base: 0x000000dc000000 end: 0x000000de1fffff
[ 0.019239] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.019240] HPET id 0 under DRHD base 0xfed91000
[ 0.019351] Enabled IRQ remapping in x2apic mode
[ 0.019352] Enabling x2apic
[ 0.019353] Enabled x2apic
[ 0.019357] Switched APIC routing to cluster x2apic.
[ 0.019728] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059385] CPU0: Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz stepping 03
[ 0.165234] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
[ 0.165237] ... version: 3
[ 0.165238] ... bit width: 48
[ 0.165238] ... generic registers: 4
[ 0.165239] ... value mask: 0000ffffffffffff
[ 0.165239] ... max period: 000000007fffffff
[ 0.165240] ... fixed-purpose events: 3
[ 0.165241] ... event mask: 000000070000000f
[ 0.165330] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.165385] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
[ 0.261907] Brought up 8 CPUs
[ 0.261909] Total of 8 processors activated (54396.20 BogoMIPS).
[ 0.269123] devtmpfs: initialized
[ 0.269806] EVM: security.selinux
[ 0.269807] EVM: security.SMACK64
[ 0.269807] EVM: security.capability
[ 0.269829] PM: Registering ACPI NVS region [mem 0xc83e1000-0xc83e7fff] (28672 bytes)
[ 0.269830] PM: Registering ACPI NVS region [mem 0xd92d6000-0xd9404fff] (1241088 bytes)
[ 0.270233] dummy:
[ 0.270258] RTC time: 18:41:48, date: 09/27/13
[ 0.270277] NET: Registered protocol family 16
[ 0.270329] Trying to unpack rootfs image as initramfs...
[ 0.270376] ACPI: bus type pci registered
[ 0.270406] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.270408] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.275080] PCI: Using configuration type 1 for base access
[ 0.275608] bio: create slab at 0
[ 0.275649] ACPI: Added _OSI(Module Device)
[ 0.275651] ACPI: Added _OSI(Processor Device)
[ 0.275652] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.275652] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.276861] ACPI: EC: Look up EC in DSDT
[ 0.278213] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.280045] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.280211] _OSC request data:1 17
[ 0.321211] ACPI: SSDT 00000000d926cc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.321518] ACPI: Dynamic OEM Table Load:
[ 0.321519] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.357264] ACPI: SSDT 00000000d926c618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.357621] ACPI: Dynamic OEM Table Load:
[ 0.357623] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.361170] ACPI: SSDT 00000000d926bd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.361474] ACPI: Dynamic OEM Table Load:
[ 0.361475] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.373818] ACPI: Interpreter enabled
[ 0.373821] ACPI: (supports S0 S1 S4 S5)
[ 0.373839] ACPI: Using IOAPIC for interrupt routing
[ 0.377824] ACPI: Power Resource [FN00] (off)
[ 0.377861] ACPI: Power Resource [FN01] (off)
[ 0.377896] ACPI: Power Resource [FN02] (off)
[ 0.377931] ACPI: Power Resource [FN03] (off)
[ 0.377965] ACPI: Power Resource [FN04] (off)
[ 0.378317] ACPI: No dock devices found.
[ 0.378331] HEST: Table parsing has been initialized.
[ 0.378333] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.378516] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.378767] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.378769] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.378770] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.378771] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.378772] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.378773] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.378774] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.378775] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.378776] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.378777] pci_root PNP0A08:00: host bridge window [mem 0xde200000-0xfeafffff]
[ 0.378778] pci_root PNP0A08:00: host bridge window [mem 0x21fe00000-0x61fdfffff]
[ 0.378794] PCI host bridge to bus 0000:00
[ 0.378796] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.378797] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.378798] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.378799] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.378799] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.378800] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.378801] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.378802] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.378803] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.378804] pci_bus 0000:00: root bus resource [mem 0xde200000-0xfeafffff]
[ 0.378805] pci_bus 0000:00: root bus resource [mem 0x21fe00000-0x61fdfffff]
[ 0.378811] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
[ 0.378838] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000
[ 0.378845] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.378849] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.378852] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.378873] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.378879] pci 0000:00:03.0: reg 10: [mem 0xf7c34000-0xf7c37fff 64bit]
[ 0.378925] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.378941] pci 0000:00:14.0: reg 10: [mem 0xf7c20000-0xf7c2ffff 64bit]
[ 0.378993] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.379009] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.379026] pci 0000:00:16.0: reg 10: [mem 0xf7c40000-0xf7c4000f 64bit]
[ 0.379081] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.379105] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 0.379119] pci 0000:00:19.0: reg 10: [mem 0xf7c00000-0xf7c1ffff]
[ 0.379126] pci 0000:00:19.0: reg 14: [mem 0xf7c3d000-0xf7c3dfff]
[ 0.379133] pci 0000:00:19.0: reg 18: [io 0xf060-0xf07f]
[ 0.379185] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.379206] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.379224] pci 0000:00:1a.0: reg 10: [mem 0xf7c3c000-0xf7c3c3ff]
[ 0.379303] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.379325] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.379337] pci 0000:00:1b.0: reg 10: [mem 0xf7c30000-0xf7c33fff 64bit]
[ 0.379393] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.379410] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.379473] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.379494] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.379557] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.379577] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.379633] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.379651] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.379707] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.379724] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[ 0.379780] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.379803] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.379821] pci 0000:00:1d.0: reg 10: [mem 0xf7c3b000-0xf7c3b3ff]
[ 0.379900] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.379921] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100
[ 0.380028] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.380041] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.380047] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.380054] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.380060] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.380067] pci 0000:00:1f.2: reg 20: [io 0xf040-0xf05f]
[ 0.380073] pci 0000:00:1f.2: reg 24: [mem 0xf7c3a000-0xf7c3a7ff]
[ 0.380105] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.380118] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.380130] pci 0000:00:1f.3: reg 10: [mem 0xf7c39000-0xf7c390ff 64bit]
[ 0.380148] pci 0000:00:1f.3: reg 20: [io 0x0580-0x059f]
[ 0.380177] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
[ 0.380194] pci 0000:00:1f.6: reg 10: [mem 0xf7c38000-0xf7c38fff 64bit]
[ 0.380289] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.380371] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[ 0.380394] pci 0000:02:00.0: reg 10: [mem 0xf7b00000-0xf7b7ffff]
[ 0.380426] pci 0000:02:00.0: reg 18: [io 0xe000-0xe01f]
[ 0.380443] pci 0000:02:00.0: reg 1c: [mem 0xf7b80000-0xf7b83fff]
[ 0.380582] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.385117] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.385120] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.385124] pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.385192] pci 0000:03:00.0: [10e3:8113] type 01 class 0x060401
[ 0.385316] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385340] pci 0000:00:1c.5: PCI bridge to [bus 03-04]
[ 0.385345] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.385412] pci 0000:04:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.385443] pci 0000:04:03.0: reg 10: [mem 0xf7a04000-0xf7a047ff]
[ 0.385459] pci 0000:04:03.0: reg 14: [mem 0xf7a00000-0xf7a03fff]
[ 0.385593] pci 0000:04:03.0: supports D1 D2
[ 0.385594] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.385672] pci 0000:03:00.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.385682] pci 0000:03:00.0: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.385689] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.385690] pci 0000:03:00.0: bridge window [mem 0xf7a00000-0xf7afffff] (subtractive decode)
[ 0.385691] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.385692] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.385803] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.385831] pci 0000:05:00.0: reg 10: [mem 0xf7900000-0xf7901fff 64bit]
[ 0.385972] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.393153] pci 0000:00:1c.6: PCI bridge to [bus 05-05]
[ 0.393157] pci 0000:00:1c.6: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.393208] pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601
[ 0.393222] pci 0000:06:00.0: reg 10: [io 0xd050-0xd057]
[ 0.393232] pci 0000:06:00.0: reg 14: [io 0xd040-0xd043]
[ 0.393242] pci 0000:06:00.0: reg 18: [io 0xd030-0xd037]
[ 0.393253] pci 0000:06:00.0: reg 1c: [io 0xd020-0xd023]
[ 0.393263] pci 0000:06:00.0: reg 20: [io 0xd000-0xd01f]
[ 0.393273] pci 0000:06:00.0: reg 24: [mem 0xf7800000-0xf78001ff]
[ 0.401095] pci 0000:00:1c.7: PCI bridge to [bus 06-06]
[ 0.401098] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
[ 0.401102] pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.401124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.401178] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.401197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.401215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.401234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06.BR30._PRT]
[ 0.401263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
[ 0.401282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 0.401368] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.401647] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.405392] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.405419] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.405445] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.405468] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.405492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.405517] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.405542] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.405565] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.405613] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.405618] vgaarb: loaded
[ 0.405618] vgaarb: bridge control possible 0000:00:02.0
[ 0.405700] SCSI subsystem initialized
[ 0.405722] libata version 3.00 loaded.
[ 0.405732] ACPI: bus type usb registered
[ 0.405741] usbcore: registered new interface driver usbfs
[ 0.405746] usbcore: registered new interface driver hub
[ 0.405754] usbcore: registered new device driver usb
[ 0.405789] PCI: Using ACPI for IRQ routing
[ 0.406961] PCI: pci_cache_line_size set to 64 bytes
[ 0.407107] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.407108] e820: reserve RAM buffer [mem 0xc83e1000-0xcbffffff]
[ 0.407109] e820: reserve RAM buffer [mem 0xc8cb2000-0xcbffffff]
[ 0.407110] e820: reserve RAM buffer [mem 0xd91da000-0xdbffffff]
[ 0.407111] e820: reserve RAM buffer [mem 0xd92d6000-0xdbffffff]
[ 0.407112] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.407113] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.407163] NetLabel: Initializing
[ 0.407164] NetLabel: domain hash size = 128
[ 0.407164] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.407170] NetLabel: unlabeled traffic allowed by default
[ 0.407201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.407204] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.410218] Switching to clocksource hpet
[ 0.413533] AppArmor: AppArmor Filesystem Enabled
[ 0.413541] pnp: PnP ACPI init
[ 0.413547] ACPI: bus type pnp registered
[ 0.413691] pnp 00:00: [bus 00-3e]
[ 0.413692] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.413693] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.413694] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.413696] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.413697] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.413698] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.413699] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.413700] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.413701] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.413702] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.413702] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.413703] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.413704] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.413705] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.413706] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.413707] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.413708] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.413709] pnp 00:00: [mem 0xde200000-0xfeafffff window]
[ 0.413710] pnp 00:00: [mem 0x21fe00000-0x61fdfffff window]
[ 0.413745] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.413756] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.413775] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.413776] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.413782] pnp 00:02: [io 0x0000-0x001f]
[ 0.413783] pnp 00:02: [io 0x0081-0x0091]
[ 0.413784] pnp 00:02: [io 0x0093-0x009f]
[ 0.413784] pnp 00:02: [io 0x00c0-0x00df]
[ 0.413786] pnp 00:02: [dma 4]
[ 0.413797] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.413800] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.413808] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.413855] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.413865] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.413879] pnp 00:05: [io 0x00f0]
[ 0.413888] pnp 00:05: [irq 13]
[ 0.413897] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.413942] pnp 00:06: [io 0x002e-0x002f]
[ 0.413943] pnp 00:06: [io 0x004e-0x004f]
[ 0.413943] pnp 00:06: [io 0x0061]
[ 0.413945] pnp 00:06: [io 0x0063]
[ 0.413946] pnp 00:06: [io 0x0065]
[ 0.413947] pnp 00:06: [io 0x0067]
[ 0.413948] pnp 00:06: [io 0x0070]
[ 0.413949] pnp 00:06: [io 0x0080]
[ 0.413949] pnp 00:06: [io 0x0092]
[ 0.413950] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.413951] pnp 00:06: [io 0x0680-0x069f]
[ 0.413952] pnp 00:06: [io 0xffff]
[ 0.413953] pnp 00:06: [io 0xffff]
[ 0.413954] pnp 00:06: [io 0xffff]
[ 0.413955] pnp 00:06: [io 0x1c00-0x1cfe]
[ 0.413955] pnp 00:06: [io 0x1d00-0x1dfe]
[ 0.413956] pnp 00:06: [io 0x1e00-0x1efe]
[ 0.413957] pnp 00:06: [io 0x1f00-0x1ffe]
[ 0.413958] pnp 00:06: [io 0x0ca4-0x0ca7]
[ 0.413959] pnp 00:06: [io 0x1800-0x18fe]
[ 0.413960] pnp 00:06: [io 0x164e-0x164f]
[ 0.413983] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.413984] system 00:06: [io 0xffff] has been reserved
[ 0.413985] system 00:06: [io 0xffff] has been reserved
[ 0.413986] system 00:06: [io 0xffff] has been reserved
[ 0.413987] system 00:06: [io 0x1c00-0x1cfe] has been reserved
[ 0.413988] system 00:06: [io 0x1d00-0x1dfe] has been reserved
[ 0.413989] system 00:06: [io 0x1e00-0x1efe] has been reserved
[ 0.413990] system 00:06: [io 0x1f00-0x1ffe] has been reserved
[ 0.413991] system 00:06: [io 0x0ca4-0x0ca7] has been reserved
[ 0.413992] system 00:06: [io 0x1800-0x18fe] has been reserved
[ 0.413993] system 00:06: [io 0x164e-0x164f] has been reserved
[ 0.413994] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.413998] pnp 00:07: [io 0x0070-0x0077]
[ 0.414003] pnp 00:07: [irq 8]
[ 0.414013] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.414025] pnp 00:08: [io 0x1854-0x1857]
[ 0.414041] system 00:08: [io 0x1854-0x1857] has been reserved
[ 0.414042] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.414087] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.414088] pnp 00:09: [io 0x0a00-0x0a1f]
[ 0.414088] pnp 00:09: [io 0x0a30-0x0a3f]
[ 0.414089] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.414106] system 00:09: [io 0x0a00-0x0a1f] has been reserved
[ 0.414108] system 00:09: [io 0x0a30-0x0a3f] has been reserved
[ 0.414109] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414249] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.414254] pnp 00:0a: [irq 4]
[ 0.414255] pnp 00:0a: [dma 0 disabled]
[ 0.414290] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.414409] pnp 00:0b: [io 0x02f8-0x02ff]
[ 0.414414] pnp 00:0b: [irq 3]
[ 0.414415] pnp 00:0b: [dma 0 disabled]
[ 0.414439] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.414450] pnp 00:0c: [io 0x0010-0x001f]
[ 0.414451] pnp 00:0c: [io 0x0022-0x003f]
[ 0.414452] pnp 00:0c: [io 0x0044-0x005f]
[ 0.414453] pnp 00:0c: [io 0x0062-0x0063]
[ 0.414454] pnp 00:0c: [io 0x0065-0x006f]
[ 0.414454] pnp 00:0c: [io 0x0072-0x007f]
[ 0.414455] pnp 00:0c: [io 0x0080]
[ 0.414456] pnp 00:0c: [io 0x0084-0x0086]
[ 0.414457] pnp 00:0c: [io 0x0088]
[ 0.414458] pnp 00:0c: [io 0x008c-0x008e]
[ 0.414459] pnp 00:0c: [io 0x0090-0x009f]
[ 0.414459] pnp 00:0c: [io 0x00a2-0x00bf]
[ 0.414460] pnp 00:0c: [io 0x00e0-0x00ef]
[ 0.414461] pnp 00:0c: [io 0x04d0-0x04d1]
[ 0.414481] system 00:0c: [io 0x04d0-0x04d1] has been reserved
[ 0.414482] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414735] pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
[ 0.414736] pnp 00:0d: [mem 0xfed10000-0xfed17fff]
[ 0.414737] pnp 00:0d: [mem 0xfed18000-0xfed18fff]
[ 0.414738] pnp 00:0d: [mem 0xfed19000-0xfed19fff]
[ 0.414739] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
[ 0.414740] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
[ 0.414741] pnp 00:0d: [mem 0xfed90000-0xfed93fff]
[ 0.414741] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
[ 0.414742] pnp 00:0d: [mem 0xff000000-0xffffffff]
[ 0.414744] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
[ 0.414745] pnp 00:0d: [mem 0xf7fef000-0xf7feffff]
[ 0.414746] pnp 00:0d: [mem 0xf7ff0000-0xf7ff0fff]
[ 0.414777] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.414778] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.414779] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.414780] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.414781] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.414783] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.414784] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.414785] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.414786] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
[ 0.414787] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.414788] system 00:0d: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.414789] system 00:0d: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.414791] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414920] pnp: PnP ACPI: found 14 devices
[ 0.414921] ACPI: ACPI bus type pnp unregistered
[ 0.420458] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
[ 0.420461] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
[ 0.420462] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01-01] add_size 200000
[ 0.420495] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.420496] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.420497] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.420500] pci 0000:00:1c.0: BAR 14: assigned [mem 0xde200000-0xde3fffff]
[ 0.420502] pci 0000:00:1c.0: BAR 15: assigned [mem 0xde400000-0xde5fffff 64bit pref]
[ 0.420504] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.420505] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.420507] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.420512] pci 0000:00:1c.0: bridge window [mem 0xde200000-0xde3fffff]
[ 0.420515] pci 0000:00:1c.0: bridge window [mem 0xde400000-0xde5fffff 64bit pref]
[ 0.420520] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.420522] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.420526] pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.420533] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[ 0.420539] pci 0000:03:00.0: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.420548] pci 0000:00:1c.5: PCI bridge to [bus 03-04]
[ 0.420552] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.420559] pci 0000:00:1c.6: PCI bridge to [bus 05-05]
[ 0.420563] pci 0000:00:1c.6: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.420569] pci 0000:00:1c.7: PCI bridge to [bus 06-06]
[ 0.420572] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
[ 0.420576] pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.420610] pci 0000:03:00.0: setting latency timer to 64
[ 0.420620] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.420622] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.420623] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420624] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.420624] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.420625] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.420626] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.420627] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.420628] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.420629] pci_bus 0000:00: resource 13 [mem 0xde200000-0xfeafffff]
[ 0.420630] pci_bus 0000:00: resource 14 [mem 0x21fe00000-0x61fdfffff]
[ 0.420632] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.420633] pci_bus 0000:01: resource 1 [mem 0xde200000-0xde3fffff]
[ 0.420634] pci_bus 0000:01: resource 2 [mem 0xde400000-0xde5fffff 64bit pref]
[ 0.420635] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.420636] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.420637] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.420638] pci_bus 0000:04: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.420639] pci_bus 0000:04: resource 5 [mem 0xf7a00000-0xf7afffff]
[ 0.420640] pci_bus 0000:05: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.420641] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.420642] pci_bus 0000:06: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.420657] NET: Registered protocol family 2
[ 0.420759] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.421175] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.422049] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.422160] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.422162] TCP: reno registered
[ 0.422170] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.422190] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.422230] NET: Registered protocol family 1
[ 0.422236] pci 0000:00:02.0: Boot video device
[ 0.430438] Freeing initrd memory: 15340k freed
[ 0.462400] PCI: CLS 64 bytes, default 64
[ 0.462404] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.462405] software IO TLB [mem 0xd51da000-0xd91d9fff] (64MB) mapped at [ffff8800d51da000-ffff8800d91d9fff]
[ 0.462758] audit: initializing netlink socket (disabled)
[ 0.462763] type=2000 audit(1380307308.356:1): initialized
[ 0.477665] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.478663] VFS: Disk quotas dquot_6.5.2
[ 0.478682] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.478906] fuse init (API version 7.19)
[ 0.478944] msgmni has been set to 15733
[ 0.479162] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.479181] io scheduler noop registered
[ 0.479181] io scheduler deadline registered (default)
[ 0.479192] io scheduler cfq registered
[ 0.479279] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 0.479361] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.479433] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.479501] pcieport 0000:00:1c.6: irq 45 for MSI/MSI-X
[ 0.479570] pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
[ 0.479622] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.479625] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.479633] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.479634] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.479638] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.479647] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.479648] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.479649] pci 0000:04:03.0: Signaling PME through PCIe PME interrupt
[ 0.479652] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.479660] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.479661] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.479664] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[ 0.479672] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 0.479673] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.479676] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 0.479682] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.479714] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 8c10 ss_vid 15d9 ss_did 805
[ 0.479729] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.479731] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.479755] intel_idle: does not run on family 6 model 60
[ 0.479796] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.479799] ACPI: Power Button [PWRB]
[ 0.479817] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.479818] ACPI: Power Button [PWRF]
[ 0.479849] ACPI: Fan [FAN0] (off)
[ 0.479863] ACPI: Fan [FAN1] (off)
[ 0.479875] ACPI: Fan [FAN2] (off)
[ 0.479888] ACPI: Fan [FAN3] (off)
[ 0.479900] ACPI: Fan [FAN4] (off)
[ 0.479932] ACPI: Requesting acpi_cpufreq
[ 0.481178] Monitor-Mwait will be used to enter C-1 state
[ 0.481180] Monitor-Mwait will be used to enter C-2 state
[ 0.481183] ACPI: acpi_idle registered with cpuidle
[ 0.486006] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.486008] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.486102] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.486103] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.486156] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 0.486218] \_SB_:_OSC request failed
[ 0.486219] _OSC request data:1 1 0
[ 0.486222] _OSC request data:1 1 0
[ 0.486223] GHES: APEI firmware first mode is enabled by APEI bit.
[ 0.506614] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.526955] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.547820] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.568186] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.568343] Linux agpgart interface v0.103
[ 0.568958] brd: module loaded
[ 0.569269] loop: module loaded
[ 0.569424] Fixed MDIO Bus: probed
[ 0.569443] tun: Universal TUN/TAP device driver, 1.6
[ 0.569443] tun: (C) 1999-2004 Max Krasnyansky
[ 0.569463] PPP generic driver version 2.4.2
[ 0.569493] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.569523] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.569526] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.569530] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.569548] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.573428] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.573438] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7c3c000
[ 0.582207] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.582218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.582219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.582220] usb usb1: Product: EHCI Host Controller
[ 0.582221] usb usb1: Manufacturer: Linux 3.5.0-41-generic ehci_hcd
[ 0.582222] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.582278] hub 1-0:1.0: USB hub found
[ 0.582280] hub 1-0:1.0: 2 ports detected
[ 0.582319] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.582322] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.582325] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.582340] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.586208] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.586216] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7c3b000
[ 0.598197] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.598204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.598205] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.598206] usb usb2: Product: EHCI Host Controller
[ 0.598207] usb usb2: Manufacturer: Linux 3.5.0-41-generic ehci_hcd
[ 0.598208] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.598255] hub 2-0:1.0: USB hub found
[ 0.598256] hub 2-0:1.0: 2 ports detected
[ 0.598283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.598290] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.598316] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.598319] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.598321] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.598390] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.598419] xhci_hcd 0000:00:14.0: irq 47 for MSI/MSI-X
[ 0.598447] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.598448] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.598449] usb usb3: Product: xHCI Host Controller
[ 0.598449] usb usb3: Manufacturer: Linux 3.5.0-41-generic xhci_hcd
[ 0.598450] usb usb3: SerialNumber: 0000:00:14.0
[ 0.598489] xHCI xhci_add_endpoint called for root hub
[ 0.598490] xHCI xhci_check_bandwidth called for root hub
[ 0.598500] hub 3-0:1.0: USB hub found
[ 0.598514] hub 3-0:1.0: 15 ports detected
[ 0.598570] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.598572] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.598586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.598587] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.598588] usb usb4: Product: xHCI Host Controller
[ 0.598589] usb usb4: Manufacturer: Linux 3.5.0-41-generic xhci_hcd
[ 0.598590] usb usb4: SerialNumber: 0000:00:14.0
[ 0.598622] xHCI xhci_add_endpoint called for root hub
[ 0.598623] xHCI xhci_check_bandwidth called for root hub
[ 0.598632] hub 4-0:1.0: USB hub found
[ 0.598641] hub 4-0:1.0: 6 ports detected
[ 0.598763] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.598767] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[ 0.604104] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
[ 0.604108] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 0.604111] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 0.604114] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X
[ 0.604118] xhci_hcd 0000:05:00.0: irq 52 for MSI/MSI-X
[ 0.604121] xhci_hcd 0000:05:00.0: irq 53 for MSI/MSI-X
[ 0.604125] xhci_hcd 0000:05:00.0: irq 54 for MSI/MSI-X
[ 0.604128] xhci_hcd 0000:05:00.0: irq 55 for MSI/MSI-X
[ 0.604248] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.604249] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.604250] usb usb5: Product: xHCI Host Controller
[ 0.604251] usb usb5: Manufacturer: Linux 3.5.0-41-generic xhci_hcd
[ 0.604252] usb usb5: SerialNumber: 0000:05:00.0
[ 0.604287] xHCI xhci_add_endpoint called for root hub
[ 0.604288] xHCI xhci_check_bandwidth called for root hub
[ 0.604299] hub 5-0:1.0: USB hub found
[ 0.604305] hub 5-0:1.0: 2 ports detected
[ 0.604338] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.604340] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[ 0.607462] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.607463] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.607464] usb usb6: Product: xHCI Host Controller
[ 0.607465] usb usb6: Manufacturer: Linux 3.5.0-41-generic xhci_hcd
[ 0.607465] usb usb6: SerialNumber: 0000:05:00.0
[ 0.607497] xHCI xhci_add_endpoint called for root hub
[ 0.607498] xHCI xhci_check_bandwidth called for root hub
[ 0.607507] hub 6-0:1.0: USB hub found
[ 0.607514] hub 6-0:1.0: 2 ports detected
[ 0.607585] usbcore: registered new interface driver libusual
[ 0.607604] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.610133] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.610135] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.610204] mousedev: PS/2 mouse device common for all mice
[ 0.610273] rtc_cmos 00:07: RTC can wake from S4
[ 0.610365] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.610386] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.610415] device-mapper: uevent: version 1.0.3
[ 0.610446] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.610493] cpuidle: using governor ladder
[ 0.610557] cpuidle: using governor menu
[ 0.610558] EFI Variables Facility v0.08 2004-May-17
[ 0.610652] ashmem: initialized
[ 0.610716] TCP: cubic registered
[ 0.610764] NET: Registered protocol family 10
[ 0.610865] NET: Registered protocol family 17
[ 0.610870] Key type dns_resolver registered
[ 0.610944] PM: Hibernation image not present or could not be loaded.
[ 0.610948] registered taskstats version 1
[ 0.612040] Key type trusted registered
[ 0.613052] Key type encrypted registered
[ 0.614686] Magic number: 13:91:697
[ 0.614793] rtc_cmos 00:07: setting system clock to 2013-09-27 18:41:48 UTC (1380307308)
[ 0.615849] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.615850] EDD information not available.
[ 0.616966] Freeing unused kernel memory: 948k freed
[ 0.617024] Write protecting the kernel read-only data: 12288k
[ 0.619365] Freeing unused kernel memory: 1356k freed
[ 0.621193] Freeing unused kernel memory: 1060k freed
[ 0.630594] udevd[120]: starting version 175
[ 0.645070] dca service started, version 1.12.1
[ 0.645288] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 0.645290] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 0.645330] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.645390] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.645420] e1000e 0000:00:19.0: irq 56 for MSI/MSI-X
[ 0.645578] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.0.1-k
[ 0.645580] igb: Copyright (c) 2007-2012 Intel Corporation.
[ 0.646065] igb 0000:02:00.0: irq 57 for MSI/MSI-X
[ 0.646071] igb 0000:02:00.0: irq 58 for MSI/MSI-X
[ 0.646077] igb 0000:02:00.0: irq 59 for MSI/MSI-X
[ 0.646082] igb 0000:02:00.0: irq 60 for MSI/MSI-X
[ 0.646087] igb 0000:02:00.0: irq 61 for MSI/MSI-X
[ 0.690455] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 0.690458] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:25:90:86:c7:6b
[ 0.690515] igb 0000:02:00.0: eth0: PBA No: 011000-000
[ 0.690516] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 0.702312] firewire_ohci 0000:04:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 0.841271] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:86:c7:6a
[ 0.841273] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
[ 0.841303] e1000e 0000:00:19.0: eth1: MAC: 11, PHY: 12, PBA No: 0100FF-0FF
[ 0.841361] ahci 0000:00:1f.2: version 3.0
[ 0.841448] ahci 0000:00:1f.2: irq 62 for MSI/MSI-X
[ 0.841526] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.841528] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.841530] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.878446] scsi0 : ahci
[ 0.878549] scsi1 : ahci
[ 0.878700] scsi2 : ahci
[ 0.878819] scsi3 : ahci
[ 0.878945] scsi4 : ahci
[ 0.879021] scsi5 : ahci
[ 0.879249] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 62
[ 0.879252] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 62
[ 0.879254] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 62
[ 0.879256] ata4: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a280 irq 62
[ 0.879258] ata5: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a300 irq 62
[ 0.879260] ata6: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a380 irq 62
[ 0.879359] ahci 0000:06:00.0: irq 63 for MSI/MSI-X
[ 0.879382] ahci: SSS flag set, parallel bus scan disabled
[ 0.879417] ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.879419] ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 0.879583] scsi6 : ahci
[ 0.879674] scsi7 : ahci
[ 0.879707] ata7: SATA max UDMA/133 abar m512@0xf7800000 port 0xf7800100 irq 63
[ 0.879710] ata8: SATA max UDMA/133 abar m512@0xf7800000 port 0xf7800180 irq 63
[ 0.894032] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.026355] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.026357] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.026504] hub 1-1:1.0: USB hub found
[ 1.026603] hub 1-1:1.0: 6 ports detected
[ 1.137954] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.197923] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.197943] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.197959] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.197981] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.197998] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.198017] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.206005] firewire_core 0000:04:03.0: created device fw0: GUID 0030480000109c6c, S400
[ 1.270243] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.270246] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.270480] hub 2-1:1.0: USB hub found
[ 1.270584] hub 2-1:1.0: 8 ports detected
[ 1.369783] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.381749] ata7.00: ATA-8: KINGSTON SV300S37A120G, 505ABBF1, max UDMA/133
[ 1.381752] ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.391681] ata7.00: configured for UDMA/133
[ 1.391766] scsi 6:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5
[ 1.391859] sd 6:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.391879] sd 6:0:0:0: [sda] Write Protect is off
[ 1.391880] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.391886] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.391894] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 1.392368] sda: sda1 sda2 < sda5 sda6 >
[ 1.392840] sd 6:0:0:0: [sda] Attached SCSI disk
[ 1.437744] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 1.461723] Refined TSC clocksource calibration: 3399.995 MHz.
[ 1.461727] Switching to clocksource tsc
[ 1.513161] usb 3-1: New USB device found, idVendor=0a81, idProduct=0101
[ 1.513163] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.513165] usb 3-1: Product: USB Keyboard
[ 1.513166] usb 3-1: Manufacturer: CHESEN
[ 1.513560] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.513564] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.513566] usb 3-1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
[ 1.625629] usb 3-10: new high-speed USB device number 3 using xhci_hcd
[ 1.650213] usb 3-10: New USB device found, idVendor=0cf3, idProduct=9271
[ 1.650216] usb 3-10: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1.650217] usb 3-10: Product: USB2.0 WLAN
[ 1.650218] usb 3-10: Manufacturer: ATHEROS
[ 1.650219] usb 3-10: SerialNumber: 12345
[ 1.709587] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.746008] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1.789534] usbcore: registered new interface driver usbhid
[ 1.789536] usbhid: USB HID core driver
[ 1.900662] Adding 8268796k swap on /dev/sda6. Priority:-1 extents:1 across:8268796k SS
[ 1.904620] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1.904624] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1.908559] udevd[386]: starting version 175
[ 1.915655] lp: driver loaded but no devices found
[ 1.924557] [drm] Initialized drm 1.1.0 20060810
[ 1.929010] [drm] Memory usable by graphics device = 2048M
[ 1.929016] i915 0000:00:02.0: setting latency timer to 64
[ 1.938629] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input2
[ 1.939661] hid-generic 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:14.0-1/input0
[ 1.945191] type=1400 audit(1380332509.825:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=513 comm="apparmor_parser"
[ 1.945412] type=1400 audit(1380332509.829:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=513 comm="apparmor_parser"
[ 1.945524] type=1400 audit(1380332509.829:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=513 comm="apparmor_parser"
[ 1.948182] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input3
[ 1.948231] hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:14.0-1/input1
[ 1.948296] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/input/input4
[ 1.948339] hid-generic 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Mouse [CHESEN USB Keyboard] on usb-0000:00:14.0-1/input2
[ 1.952462] cfg80211: Calling CRDA to update world regulatory domain
[ 1.958856] [drm:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100
[ 1.958905] i915 0000:00:02.0: irq 64 for MSI/MSI-X
[ 1.958912] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.958913] [drm] Driver supports precise vblank timestamp query.
[ 1.958942] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.962148] usb 3-10: ath9k_htc: Firmware htc_9271.fw requested
[ 1.962175] usbcore: registered new interface driver ath9k_htc
[ 1.965534] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x10
[ 1.994233] cfg80211: World regulatory domain updated:
[ 1.994235] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1.994236] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1.994237] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1.994238] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1.994239] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1.994240] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.009034] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x10
[ 2.009682] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x10
[ 2.010282] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x10
[ 2.010855] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x10
[ 2.011437] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x10
[ 2.012004] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x10
[ 2.012672] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x10
[ 2.013285] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 2.160117] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 2.192283] init: failsafe main process (842) killed by TERM signal
[ 2.224794] type=1400 audit(1380332510.105:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=911 comm="apparmor_parser"
[ 2.224853] type=1400 audit(1380332510.105:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=917 comm="apparmor_parser"
[ 2.225025] type=1400 audit(1380332510.105:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=910 comm="apparmor_parser"
[ 2.225106] type=1400 audit(1380332510.105:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=911 comm="apparmor_parser"
[ 2.225258] type=1400 audit(1380332510.109:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=910 comm="apparmor_parser"
[ 2.225273] type=1400 audit(1380332510.109:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=911 comm="apparmor_parser"
[ 2.230945] Bluetooth: Core ver 2.16
[ 2.230955] NET: Registered protocol family 31
[ 2.230957] Bluetooth: HCI device and connection manager initialized
[ 2.230958] Bluetooth: HCI socket layer initialized
[ 2.230959] Bluetooth: L2CAP socket layer initialized
[ 2.230962] Bluetooth: SCO socket layer initialized
[ 2.231897] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.231899] Bluetooth: BNEP filters: protocol multicast
[ 2.231929] ppdev: user-space parallel port driver
[ 2.233701] Bluetooth: RFCOMM TTY layer initialized
[ 2.233704] Bluetooth: RFCOMM socket layer initialized
[ 2.233705] Bluetooth: RFCOMM ver 1.11
[ 2.240976] fbcon: inteldrmfb (fb0) is primary device
[ 2.241045] Console: switching to colour frame buffer device 160x64
[ 2.241061] fb0: inteldrmfb frame buffer device
[ 2.241061] drm: registered panic notifier
[ 2.241325] i915 0000:00:02.0: More than 8 outputs detected
[ 2.250208] i915_hsw: fixme: max PWM is zero
[ 2.250312] acpi device:61: registered as cooling_device13
[ 2.250340] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.250374] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.250435] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.250495] snd_hda_intel 0000:00:03.0: irq 65 for MSI/MSI-X
[ 2.264636] init: alsa-restore main process (996) terminated with status 19
[ 2.266621] hda_codec: invalid CONNECT_LIST verb 3[0]:0
[ 2.266831] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 2.267042] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
[ 2.292952] usb 3-10: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 2.306383] hda_codec: ALC1150: SKU not ready 0x00000000
[ 2.314172] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 2.314240] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 2.314282] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 2.314322] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 2.314362] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 2.314400] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 2.314437] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 2.314621] ACPI Warning: 0x0000000000001860-0x000000000000187f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 2.314625] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.314626] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 2.314629] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 2.314631] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.314634] ACPI Warning: 0x0000000000001c00-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20120320/utaddress-251)
[ 2.314636] ACPI Warning: 0x0000000000001c00-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20120320/utaddress-251)
[ 2.314638] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.314639] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.400813] e1000e 0000:00:19.0: irq 56 for MSI/MSI-X
[ 2.501151] e1000e 0000:00:19.0: irq 56 for MSI/MSI-X
[ 2.501526] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2.501712] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2.530254] ath9k_htc 3-10:1.0: ath9k_htc: HTC initialized with 33 credits
[ 2.795957] ath9k_htc 3-10:1.0: ath9k_htc: FW Version: 1.3
[ 2.795960] ath: EEPROM regdomain: 0x809c
[ 2.795960] ath: EEPROM indicates we should expect a country code
[ 2.795961] ath: doing EEPROM country->regdmn map search
[ 2.795962] ath: country maps to regdmn code: 0x52
[ 2.795963] ath: Country alpha2 being used: CN
[ 2.795963] ath: Regpair used: 0x52
[ 2.795965] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795966] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795967] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795967] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795968] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795969] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795970] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795970] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795971] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795972] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795972] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795973] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795974] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795975] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795975] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795976] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795977] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795978] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795978] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795979] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795980] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2.795980] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 2.795981] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 2.795982] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 2.795983] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 2.799978] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2.799979] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.799990] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2.799991] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.799991] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2.799992] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.799993] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2.799993] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.799994] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2.799995] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.799995] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2.799996] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.799997] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2.799997] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.799998] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2.799999] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.799999] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2.800000] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.800001] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2.800001] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.800002] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2.800003] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.800003] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2.800004] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.800005] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2.800006] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.800006] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2.800007] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.342003] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.342171] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.343693] ieee80211 phy0: Atheros AR9271 Rev:1
[ 3.343702] cfg80211: Calling CRDA for country: CN
[ 3.345299] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345301] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345302] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345303] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345303] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345304] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345305] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345305] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345306] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345307] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345307] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345308] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345309] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345310] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345310] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345311] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345312] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345312] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345313] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345314] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345314] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345315] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345316] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345316] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345317] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 3.345318] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3.345318] cfg80211: Disabling freq 2484 MHz
[ 3.345320] cfg80211: Regulatory domain changed to country: CN
[ 3.345321] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.345321] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3.345322] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 3.345916] Registered led device: ath9k_htc-phy0
[ 3.772804] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.772951] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.836341] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 7.842330] wlan0: authenticate with 00:12:5f:03:58:20
[ 8.121238] wlan0: direct probe to 00:12:5f:03:58:20 (try 1/3)
[ 8.321685] wlan0: send auth to 00:12:5f:03:58:20 (try 2/3)
[ 8.325121] wlan0: authenticated
[ 8.461569] wlan0: associate with 00:12:5f:03:58:20 (try 1/3)
[ 8.470552] wlan0: RX AssocResp from 00:12:5f:03:58:20 (capab=0x411 status=0 aid=1)
[ 8.481183] wlan0: associated
[ 8.481511] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8.481565] cfg80211: Calling CRDA for country: TW
[ 8.483497] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483499] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483500] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483501] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483502] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483503] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483503] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483504] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483505] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483506] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483506] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483507] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483508] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483509] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483509] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483510] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483511] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483512] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483512] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483513] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483514] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 8.483515] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483515] cfg80211: Disabling freq 2467 MHz
[ 8.483516] cfg80211: Disabling freq 2472 MHz
[ 8.483517] cfg80211: Disabling freq 2484 MHz
[ 8.483519] cfg80211: Regulatory domain changed to country: TW
[ 8.483520] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.483521] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.483521] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 8.483522] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 180.365351] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[ 180.365354] {1}[Hardware Error]: APEI generic hardware error status
[ 180.365355] {1}[Hardware Error]: severity: 2, corrected
[ 180.365369] {1}[Hardware Error]: section: 0, severity: 2, corrected
[ 180.365369] {1}[Hardware Error]: flags: 0x01
[ 180.365370] {1}[Hardware Error]: primary
[ 180.365371] {1}[Hardware Error]: fru_text: CorrectedErr
[ 180.365371] {1}[Hardware Error]: section_type: memory error
[ 180.365372] {1}[Hardware Error]: node: 0
[ 180.365373] {1}[Hardware Error]: device: 0
[ 180.365373] {1}[Hardware Error]: error_type: 2, single-bit ECC
[ 846.263309] audit_printk_skb: 42 callbacks suppressed
[ 846.263314] type=1400 audit(1380333354.819:25): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=957 comm="cupsd" pid=957 comm="cupsd" capability=36 capname="block_suspend"