dmesg - unigine-GT440-athlonx2_64-3ghz
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-31-lowlatency (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #23-Ubuntu SMP PREEMPT Thu Sep 19 17:08:15 UTC 2013 (Ubuntu 3.8.0-31.23-lowlatency 3.8.13.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bffbffff] usable
BIOS-e820: [mem 0x00000000bffc0000-0x00000000bffcdfff] ACPI data
BIOS-e820: [mem 0x00000000bffce000-0x00000000bffeffff] ACPI NVS
BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffdfff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: MSI MS-7369/MS-7369, BIOS V2.9 03/17/2009
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0xbffbffff]
[mem 0x00000000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbffbffff] page 4k
kernel direct mapping tables up to 0xbffbffff @ [mem 0x1fffb000-0x1fffffff]
RAMDISK: [mem 0x3448e000-0x3623efff]
ACPI: RSDP 00000000000f9930 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bffc0000 00038 (v01 031709 RSDT0823 20090317 MSFT 00000097)
ACPI: FACP 00000000bffc0200 00084 (v01 031709 FACP0823 20090317 MSFT 00000097)
ACPI: DSDT 00000000bffc0440 04AAD (v01 1ADKU 1ADKU004 00000004 INTL 20051117)
ACPI: FACS 00000000bffce000 00040
ACPI: APIC 00000000bffc0390 00070 (v01 031709 APIC0823 20090317 MSFT 00000097)
ACPI: MCFG 00000000bffc0400 0003C (v01 031709 OEMMCFG 20090317 MSFT 00000097)
ACPI: OEMB 00000000bffce040 00071 (v01 031709 OEMB0823 20090317 MSFT 00000097)
ACPI: HPET 00000000bffc4ef0 00038 (v01 031709 OEMHPET0 20090317 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000bffbffff]
Initmem setup node 0 [mem 0x00000000-0xbffbffff]
NODE_DATA [mem 0xbffbb000-0xbffbffff]
[ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc600000-ffff8800bf5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xbffbffff]
On node 0 totalpages: 786255
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 12223 pages used for memmap
DMA32 zone: 770049 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
e820: [mem 0xbfffe000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8800bfc00000 s85248 r8192 d21248 u1048576
pcpu-alloc: s85248 r8192 d21248 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 773962
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ 2bb4000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 3049464k/3145472k available (7065k kernel code, 452k absent, 95556k reserved, 6182k data, 940k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
NR_IRQS:16640 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 12582912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2984.752 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5969.50 BogoMIPS (lpj=2984752)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26702 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (fam: 0f, model: 43, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (11938.86 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbffce000-0xbffeffff] (139264 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
node 0 link 0: io port [2000, 2fff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, fe0bffff]
bus: [bus 00-ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xc0000000-0xfcffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [10de:0444] type 00 class 0x050000
pci 0000:00:01.0: [10de:0441] type 00 class 0x060100
pci 0000:00:01.0: reg 10: [io 0x2f00-0x2fff]
pci 0000:00:01.1: [10de:0446] type 00 class 0x0c0500
pci 0000:00:01.1: reg 10: [io 0x2900-0x293f]
pci 0000:00:01.1: reg 20: [io 0x2d00-0x2d3f]
pci 0000:00:01.1: reg 24: [io 0x2e00-0x2e3f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.2: [10de:0445] type 00 class 0x050000
pci 0000:00:02.0: [10de:0454] type 00 class 0x0c0310
pci 0000:00:02.0: reg 10: [mem 0xfcdff000-0xfcdfffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:0455] type 00 class 0x0c0320
pci 0000:00:02.1: reg 10: [mem 0xfcdfec00-0xfcdfecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: [10de:044a] type 00 class 0x040300
pci 0000:00:07.0: reg 10: [mem 0xfcdf8000-0xfcdfbfff]
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: [10de:0449] type 01 class 0x060401
pci 0000:00:09.0: [10de:0448] type 00 class 0x01018a
pci 0000:00:09.0: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:0a.0: [10de:045d] type 00 class 0x010185
pci 0000:00:0a.0: reg 10: [io 0x0f80-0x0f87]
pci 0000:00:0a.0: reg 14: [io 0x0f00-0x0f03]
pci 0000:00:0a.0: reg 18: [io 0x0e80-0x0e87]
pci 0000:00:0a.0: reg 1c: [io 0x0e00-0x0e03]
pci 0000:00:0a.0: reg 20: [io 0xa800-0xa80f]
pci 0000:00:0a.0: reg 24: [mem 0xfcdfc000-0xfcdfdfff]
pci 0000:00:0b.0: [10de:045b] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: [10de:045a] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:0458] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: [10de:0459] type 01 class 0x060400
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:0a.0: [10ec:8185] type 00 class 0x020000
pci 0000:01:0a.0: reg 10: [io 0xc800-0xc8ff]
pci 0000:01:0a.0: reg 14: [mem 0xfceffc00-0xfceffdff]
pci 0000:01:0a.0: supports D1 D2
pci 0000:01:0a.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:08.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:08.0: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0xd800-0xd8ff]
pci 0000:03:00.0: reg 18: [mem 0xfcfff000-0xfcffffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0xfcfc0000-0xfcfdffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0c.0: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:04:00.0: [10de:0de0] type 00 class 0x030000
pci 0000:04:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:04:00.0: reg 24: [io 0xec00-0xec7f]
pci 0000:04:00.0: reg 30: [mem 0xfeb80000-0xfebfffff pref]
pci 0000:04:00.1: [10de:0bea] type 00 class 0x040300
pci 0000:04:00.1: reg 10: [mem 0xfeb7c000-0xfeb7ffff]
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci 0000:00:0d.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0d.0: bridge window [mem 0xfd000000-0xfebfffff]
pci 0000:00:0d.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:0e.0: PCI bridge to [bus 05]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffc0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x0800-0x080f] has been reserved
system 00:05: [io 0x2000-0x207f] has been reserved
system 00:05: [io 0x2080-0x20ff] has been reserved
system 00:05: [io 0x2400-0x247f] has been reserved
system 00:05: [io 0x2480-0x24ff] has been reserved
system 00:05: [io 0x2800-0x287f] has been reserved
system 00:05: [io 0x2880-0x28ff] has been reserved
system 00:05: [io 0x2c00-0x2c7f] has been reserved
system 00:05: [io 0x2c80-0x2cff] has been reserved
system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
system 00:05: [mem 0xfec80000-0x1fd93ffff] could not be reserved
system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x0a00-0x0a0f] has been reserved
system 00:09: [io 0x0a10-0x0a1f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:08.0: PCI bridge to [bus 01]
pci 0000:00:08.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:08.0: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0c.0: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci 0000:00:0d.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0d.0: bridge window [mem 0xfd000000-0xfebfffff]
pci 0000:00:0d.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:0e.0: PCI bridge to [bus 05]
pci 0000:00:08.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfce00000-0xfcefffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfebfffff]
pci_bus 0000:04: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:04:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30404k freed
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1379771932.750:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 6015
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: setting latency timer to 64
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xfcdfec00
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-31-lowlatency ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfcdff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-31-lowlatency ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e59e565c252613384a3d7a66114805de72124d0c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:07: setting system clock to 2013-09-21 13:58:53 UTC (1379771933)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 940k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1116k freed
Freeing unused kernel memory: 1088k freed
udevd[108]: starting version 175
pata_amd 0000:00:09.0: version 0.4.1
pata_amd 0000:00:09.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
pata_acpi 0000:00:0a.0: setting latency timer to 64
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
r8169 0000:03:00.0: irq 44 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffc90000634000, 00:1d:92:a0:9b:4f, XID 18000000 IRQ 44
r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
ahci 0000:00:0a.0: version 3.0
ahci 0000:00:0a.0: irq 45 for MSI/MSI-X
ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pio ccc
ahci 0000:00:0a.0: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc100 irq 45
ata4: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc180 irq 45
ata5: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc200 irq 45
ata6: SATA max UDMA/133 abar m8192@0xfcdfc000 port 0xfcdfc280 irq 45
ata2: port disabled--ignoring
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-9: INTEL SSDSC2CT060A3, 300i, max UDMA/133
ata3.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
ata5.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/100
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2CT06 300i PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg2 type 5
sdb: sdb1 sdb2 sdb3
sd 4:0:0:0: [sdb] Attached SCSI disk
usb 2-1: new low-speed USB device number 2 using ohci_hcd
usb 2-1: New USB device found, idVendor=046d, idProduct=c315
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Logitech USB Keyboard
usb 2-1: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
hid-generic 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-1/input0
usb 2-2: new low-speed USB device number 3 using ohci_hcd
usb 2-2: New USB device found, idVendor=046d, idProduct=c05a
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Optical Mouse
usb 2-2: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input3
hid-generic 0003:046D:C05A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:02.0-2/input0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 4385736k swap on /dev/sdb3. Priority:-1 extents:1 across:4385736k
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[646]: starting version 175
lp: driver loaded but no devices found
init: avahi-cups-reload main process (701) terminated with status 1
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
i2c i2c-0: nForce2 SMBus adapter at 0x2d00
i2c i2c-1: nForce2 SMBus adapter at 0x2e00
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
lp0: using parport0 (interrupt-driven).
type=1400 audit(1379771936.497:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=797 comm="apparmor_parser"
type=1400 audit(1379771936.498:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=797 comm="apparmor_parser"
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
type=1400 audit(1379771936.605:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=840 comm="apparmor_parser"
type=1400 audit(1379771936.605:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=840 comm="apparmor_parser"
type=1400 audit(1379771936.606:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=840 comm="apparmor_parser"
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
cfg80211: Calling CRDA to update world regulatory domain
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
hda_intel: Disabling MSI
snd_hda_intel 0000:00:07.0: setting latency timer to 64
microcode: AMD CPU family 0xf not supported
kvm: Nested Virtualization enabled
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
init: failsafe main process (965) killed by TERM signal
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: hwaddr 404a0356a86b, RTL8185vD + rtl8225
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.30 Wed Mar 27 16:56:45 PDT 2013
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
type=1400 audit(1379771937.154:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1082 comm="apparmor_parser"
type=1400 audit(1379771937.154:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1082 comm="apparmor_parser"
type=1400 audit(1379771937.155:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1083 comm="apparmor_parser"
type=1400 audit(1379771937.155:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1083 comm="apparmor_parser"
init: alsa-restore main process (1146) terminated with status 19
input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input4
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input5
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input6
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input7
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
hda_intel: Disabling MSI
hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
Bridge firewalling registered
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0d.0/0000:04:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0d.0/0000:04:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0d.0/0000:04:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0d.0/0000:04:00.1/sound/card1/input15
init: udev-fallback-graphics main process (1289) terminated with status 1
init: kdm main process (1302) killed by TERM signal
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
cgroup: libvirtd (1263) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
cgroup: libvirtd (1263) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: libvirtd (1263) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0x42200 offMax=0x42200
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (2022) terminated with status 1
wlan0: authenticate with 64:66:b3:82:8d:a4
wlan0: send auth to 64:66:b3:82:8d:a4 (try 1/3)
wlan0: authenticated
wlan0: associate with 64:66:b3:82:8d:a4 (try 1/3)
wlan0: associate with 64:66:b3:82:8d:a4 (try 2/3)
wlan0: RX AssocResp from 64:66:b3:82:8d:a4 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: winbind main process (2511) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2513) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2516) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2519) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2522) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2525) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2529) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2531) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2533) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2536) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (2538) terminated with status 127
init: winbind respawning too fast, stopped
systemd-hostnamed[2799]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)