dmesg - Gzip

Return To Gzip System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-30-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #44-Ubuntu SMP Thu Aug 22 20:52:24 UTC 2013 (Ubuntu 3.8.0-30.44-generic 3.8.13.6)
Command line: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic.efi.signed root=/dev/mapper/legion-root ro
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000ade3bfff] usable
BIOS-e820: [mem 0x00000000ade3c000-0x00000000ade6dfff] reserved
BIOS-e820: [mem 0x00000000ade6e000-0x00000000ade7dfff] ACPI data
BIOS-e820: [mem 0x00000000ade7e000-0x00000000af163fff] ACPI NVS
BIOS-e820: [mem 0x00000000af164000-0x00000000af856fff] reserved
BIOS-e820: [mem 0x00000000af857000-0x00000000af857fff] usable
BIOS-e820: [mem 0x00000000af858000-0x00000000af85efff] ACPI NVS
BIOS-e820: [mem 0x00000000af85f000-0x00000000afc89fff] usable
BIOS-e820: [mem 0x00000000afc8a000-0x00000000afef3fff] reserved
BIOS-e820: [mem 0x00000000afef4000-0x00000000afefffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by Acer Inc.
efi:  ACPI=0xade71000  ACPI 2.0=0xade71000  SMBIOS=0xaf80dc98 
efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x00000000000a0000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem02: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002444000) (20MB)
efi: mem03: type=7, attr=0xf, range=[0x0000000002444000-0x0000000034254000) (798MB)
efi: mem04: type=2, attr=0xf, range=[0x0000000034254000-0x0000000036122000) (30MB)
efi: mem05: type=7, attr=0xf, range=[0x0000000036122000-0x0000000080a7e000) (1193MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000080a7e000-0x00000000abc10000) (689MB)
efi: mem07: type=7, attr=0xf, range=[0x00000000abc10000-0x00000000abc16000) (0MB)
efi: mem08: type=2, attr=0xf, range=[0x00000000abc16000-0x00000000abdcf000) (1MB)
efi: mem09: type=1, attr=0xf, range=[0x00000000abdcf000-0x00000000abf03000) (1MB)
efi: mem10: type=7, attr=0xf, range=[0x00000000abf03000-0x00000000ac4eb000) (5MB)
efi: mem11: type=4, attr=0xf, range=[0x00000000ac4eb000-0x00000000ac522000) (0MB)
efi: mem12: type=7, attr=0xf, range=[0x00000000ac522000-0x00000000ac550000) (0MB)
efi: mem13: type=4, attr=0xf, range=[0x00000000ac550000-0x00000000ac587000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000ac587000-0x00000000ac59e000) (0MB)
efi: mem15: type=4, attr=0xf, range=[0x00000000ac59e000-0x00000000ac5ec000) (0MB)
efi: mem16: type=7, attr=0xf, range=[0x00000000ac5ec000-0x00000000ac603000) (0MB)
efi: mem17: type=4, attr=0xf, range=[0x00000000ac603000-0x00000000ac666000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000ac666000-0x00000000ac67d000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x00000000ac67d000-0x00000000ac6b4000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x00000000ac6b4000-0x00000000ac6cb000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x00000000ac6cb000-0x00000000ac719000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000ac719000-0x00000000ac730000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x00000000ac730000-0x00000000ac77d000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000ac77d000-0x00000000ac794000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x00000000ac794000-0x00000000ac7ad000) (0MB)
efi: mem26: type=7, attr=0xf, range=[0x00000000ac7ad000-0x00000000ac7ae000) (0MB)
efi: mem27: type=4, attr=0xf, range=[0x00000000ac7ae000-0x00000000ac7af000) (0MB)
efi: mem28: type=7, attr=0xf, range=[0x00000000ac7af000-0x00000000ac7ba000) (0MB)
efi: mem29: type=4, attr=0xf, range=[0x00000000ac7ba000-0x00000000ac7bb000) (0MB)
efi: mem30: type=7, attr=0xf, range=[0x00000000ac7bb000-0x00000000ac7c1000) (0MB)
efi: mem31: type=4, attr=0xf, range=[0x00000000ac7c1000-0x00000000ac7c7000) (0MB)
efi: mem32: type=7, attr=0xf, range=[0x00000000ac7c7000-0x00000000ac7f0000) (0MB)
efi: mem33: type=4, attr=0xf, range=[0x00000000ac7f0000-0x00000000ac7f1000) (0MB)
efi: mem34: type=7, attr=0xf, range=[0x00000000ac7f1000-0x00000000ac80f000) (0MB)
efi: mem35: type=4, attr=0xf, range=[0x00000000ac80f000-0x00000000ac810000) (0MB)
efi: mem36: type=7, attr=0xf, range=[0x00000000ac810000-0x00000000ac813000) (0MB)
efi: mem37: type=4, attr=0xf, range=[0x00000000ac813000-0x00000000ac814000) (0MB)
efi: mem38: type=7, attr=0xf, range=[0x00000000ac814000-0x00000000ac825000) (0MB)
efi: mem39: type=4, attr=0xf, range=[0x00000000ac825000-0x00000000ac82b000) (0MB)
efi: mem40: type=7, attr=0xf, range=[0x00000000ac82b000-0x00000000ac85c000) (0MB)
efi: mem41: type=4, attr=0xf, range=[0x00000000ac85c000-0x00000000ac873000) (0MB)
efi: mem42: type=7, attr=0xf, range=[0x00000000ac873000-0x00000000ac874000) (0MB)
efi: mem43: type=4, attr=0xf, range=[0x00000000ac874000-0x00000000ac875000) (0MB)
efi: mem44: type=7, attr=0xf, range=[0x00000000ac875000-0x00000000ac879000) (0MB)
efi: mem45: type=4, attr=0xf, range=[0x00000000ac879000-0x00000000ac87a000) (0MB)
efi: mem46: type=7, attr=0xf, range=[0x00000000ac87a000-0x00000000ac88b000) (0MB)
efi: mem47: type=4, attr=0xf, range=[0x00000000ac88b000-0x00000000ac891000) (0MB)
efi: mem48: type=7, attr=0xf, range=[0x00000000ac891000-0x00000000ac8d8000) (0MB)
efi: mem49: type=4, attr=0xf, range=[0x00000000ac8d8000-0x00000000ac8da000) (0MB)
efi: mem50: type=7, attr=0xf, range=[0x00000000ac8da000-0x00000000ac8ee000) (0MB)
efi: mem51: type=4, attr=0xf, range=[0x00000000ac8ee000-0x00000000ac8f4000) (0MB)
efi: mem52: type=7, attr=0xf, range=[0x00000000ac8f4000-0x00000000ac912000) (0MB)
efi: mem53: type=4, attr=0xf, range=[0x00000000ac912000-0x00000000ac929000) (0MB)
efi: mem54: type=7, attr=0xf, range=[0x00000000ac929000-0x00000000ac940000) (0MB)
efi: mem55: type=4, attr=0xf, range=[0x00000000ac940000-0x00000000ac942000) (0MB)
efi: mem56: type=7, attr=0xf, range=[0x00000000ac942000-0x00000000ac957000) (0MB)
efi: mem57: type=4, attr=0xf, range=[0x00000000ac957000-0x00000000ac95d000) (0MB)
efi: mem58: type=7, attr=0xf, range=[0x00000000ac95d000-0x00000000ac96e000) (0MB)
efi: mem59: type=4, attr=0xf, range=[0x00000000ac96e000-0x00000000ac96f000) (0MB)
efi: mem60: type=7, attr=0xf, range=[0x00000000ac96f000-0x00000000ac97a000) (0MB)
efi: mem61: type=4, attr=0xf, range=[0x00000000ac97a000-0x00000000ac9a9000) (0MB)
efi: mem62: type=7, attr=0xf, range=[0x00000000ac9a9000-0x00000000ac9ab000) (0MB)
efi: mem63: type=4, attr=0xf, range=[0x00000000ac9ab000-0x00000000ac9ac000) (0MB)
efi: mem64: type=7, attr=0xf, range=[0x00000000ac9ac000-0x00000000ac9be000) (0MB)
efi: mem65: type=4, attr=0xf, range=[0x00000000ac9be000-0x00000000ac9c4000) (0MB)
efi: mem66: type=7, attr=0xf, range=[0x00000000ac9c4000-0x00000000ac9cd000) (0MB)
efi: mem67: type=4, attr=0xf, range=[0x00000000ac9cd000-0x00000000ac9d6000) (0MB)
efi: mem68: type=7, attr=0xf, range=[0x00000000ac9d6000-0x00000000ac9df000) (0MB)
efi: mem69: type=4, attr=0xf, range=[0x00000000ac9df000-0x00000000aca70000) (0MB)
efi: mem70: type=7, attr=0xf, range=[0x00000000aca70000-0x00000000aca7a000) (0MB)
efi: mem71: type=4, attr=0xf, range=[0x00000000aca7a000-0x00000000aca7c000) (0MB)
efi: mem72: type=7, attr=0xf, range=[0x00000000aca7c000-0x00000000aca7d000) (0MB)
efi: mem73: type=4, attr=0xf, range=[0x00000000aca7d000-0x00000000acb0c000) (0MB)
efi: mem74: type=7, attr=0xf, range=[0x00000000acb0c000-0x00000000acb0d000) (0MB)
efi: mem75: type=4, attr=0xf, range=[0x00000000acb0d000-0x00000000acbe9000) (0MB)
efi: mem76: type=7, attr=0xf, range=[0x00000000acbe9000-0x00000000acbea000) (0MB)
efi: mem77: type=4, attr=0xf, range=[0x00000000acbea000-0x00000000ad856000) (12MB)
efi: mem78: type=7, attr=0xf, range=[0x00000000ad856000-0x00000000adc3c000) (3MB)
efi: mem79: type=2, attr=0xf, range=[0x00000000adc3c000-0x00000000adc48000) (0MB)
efi: mem80: type=3, attr=0xf, range=[0x00000000adc48000-0x00000000ade3c000) (1MB)
efi: mem81: type=0, attr=0xf, range=[0x00000000ade3c000-0x00000000ade46000) (0MB)
efi: mem82: type=0, attr=0xf, range=[0x00000000ade46000-0x00000000ade6e000) (0MB)
efi: mem83: type=9, attr=0xf, range=[0x00000000ade6e000-0x00000000ade71000) (0MB)
efi: mem84: type=9, attr=0xf, range=[0x00000000ade71000-0x00000000ade7e000) (0MB)
efi: mem85: type=10, attr=0xf, range=[0x00000000ade7e000-0x00000000ae24c000) (3MB)
efi: mem86: type=10, attr=0xf, range=[0x00000000ae24c000-0x00000000af164000) (15MB)
efi: mem87: type=6, attr=0x800000000000000f, range=[0x00000000af164000-0x00000000af52a000) (3MB)
efi: mem88: type=6, attr=0x800000000000000f, range=[0x00000000af52a000-0x00000000af80f000) (2MB)
efi: mem89: type=5, attr=0x800000000000000f, range=[0x00000000af80f000-0x00000000af81d000) (0MB)
efi: mem90: type=5, attr=0x800000000000000f, range=[0x00000000af81d000-0x00000000af857000) (0MB)
efi: mem91: type=4, attr=0xf, range=[0x00000000af857000-0x00000000af858000) (0MB)
efi: mem92: type=10, attr=0xf, range=[0x00000000af858000-0x00000000af85f000) (0MB)
efi: mem93: type=4, attr=0xf, range=[0x00000000af85f000-0x00000000af9af000) (1MB)
efi: mem94: type=3, attr=0xf, range=[0x00000000af9af000-0x00000000afc5d000) (2MB)
efi: mem95: type=4, attr=0xf, range=[0x00000000afc5d000-0x00000000afc6a000) (0MB)
efi: mem96: type=3, attr=0xf, range=[0x00000000afc6a000-0x00000000afc7c000) (0MB)
efi: mem97: type=4, attr=0xf, range=[0x00000000afc7c000-0x00000000afc86000) (0MB)
efi: mem98: type=3, attr=0xf, range=[0x00000000afc86000-0x00000000afc8a000) (0MB)
efi: mem99: type=6, attr=0x800000000000000f, range=[0x00000000afc8a000-0x00000000afef4000) (2MB)
efi: mem100: type=4, attr=0xf, range=[0x00000000afef4000-0x00000000aff00000) (0MB)
efi: mem101: type=7, attr=0xf, range=[0x0000000100001000-0x0000000240000000) (5119MB)
efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
efi: mem106: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
efi: mem107: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB)
SMBIOS 2.7 present.
DMI: Packard Bell imedia S2110/imedia S2110, BIOS P11-A0                  08/09/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0AFF00000 mask FFFF00000 uncachable
  3 base 0B0000000 mask FF0000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000240000000 aka 9216M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 2815MB, range: 1MB, type UC
reg 3, base: 2816MB, range: 256MB, type UC
total RAM covered: 2815M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 256MB, type WB
reg 3, base: 2815MB, range: 1MB, type UC
e820: update [mem 0xaff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xaff00 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xafefffff]
 [mem 0x00000000-0x7fffffff] page 1G
 [mem 0x80000000-0xafdfffff] page 2M
 [mem 0xafe00000-0xafefffff] page 4k
kernel direct mapping tables up to 0xafefffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100001000-0x23fffffff]
 [mem 0x100001000-0x1001fffff] page 4k
 [mem 0x100200000-0x13fffffff] page 2M
 [mem 0x140000000-0x23fffffff] page 1G
kernel direct mapping tables up to 0x23fffffff @ [mem 0xadc45000-0xadc47fff]
RAMDISK: [mem 0x34254000-0x36121fff]
ACPI: RSDP 00000000ade71000 00024 (v02 ACRSYS)
ACPI: XSDT 00000000ade71078 00074 (v01 ACRSYS ACRPRDCT 01072009 AMI  00010013)
ACPI: FACP 00000000ade78088 0010C (v05 ACRSYS ACRPRDCT 01072009 AMI  00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
ACPI: DSDT 00000000ade71180 06F02 (v02 ACRSYS ACRPRDCT 00000000 INTL 20051117)
ACPI: FACS 00000000af15d080 00040
ACPI: APIC 00000000ade78198 00062 (v03 ACRSYS ACRPRDCT 01072009 AMI  00010013)
ACPI: FPDT 00000000ade78200 00044 (v01 ACRSYS ACRPRDCT 01072009 AMI  00010013)
ACPI: MCFG 00000000ade78248 0003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00010013)
ACPI: MSDM 00000000ade78288 00055 (v03 ACRSYS ACRPRDCT 01072009 AMI  00010013)
ACPI: SLIC 00000000ade782e0 00176 (v01 ACRSYS ACRPRDCT 01072009 AMI  00010013)
ACPI: HPET 00000000ade78458 00038 (v01 ACRSYS ACRPRDCT 01072009 AMI  00000005)
ACPI: VFCT 00000000ade78490 03C84 (v01   AMDG GOPTODRV 00000001 AMDG 00000001)
ACPI: SSDT 00000000ade7c118 00386 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: SSDT 00000000ade7c4a0 0168E (v02    AMD     ALIB 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x00000000-0x23fffffff]
  NODE_DATA [mem 0x23fffb000-0x23fffffff]
 [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237a00000-ffff88023f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x23fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009ffff]
  node   0: [mem 0x00100000-0xade3bfff]
  node   0: [mem 0xaf857000-0xaf857fff]
  node   0: [mem 0xaf85f000-0xafc89fff]
  node   0: [mem 0xafef4000-0xafefffff]
  node   0: [mem 0x100001000-0x23fffffff]
On node 0 totalpages: 2023939
  DMA zone: 64 pages used for memmap
  DMA zone: 9 pages reserved
  DMA zone: 3911 pages, LIFO batch:0
  DMA32 zone: 11082 pages used for memmap
  DMA32 zone: 698154 pages, LIFO batch:31
  Normal zone: 20480 pages used for memmap
  Normal zone: 1290239 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000ade3c000 - 00000000ade6e000
PM: Registered nosave memory: 00000000ade6e000 - 00000000ade7e000
PM: Registered nosave memory: 00000000ade7e000 - 00000000af164000
PM: Registered nosave memory: 00000000af164000 - 00000000af857000
PM: Registered nosave memory: 00000000af858000 - 00000000af85f000
PM: Registered nosave memory: 00000000afc8a000 - 00000000afef4000
PM: Registered nosave memory: 00000000aff00000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xaff00000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s85056 r8192 d21440 u1048576
pcpu-alloc: s85056 r8192 d21440 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1992304
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic.efi.signed root=/dev/mapper/legion-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7831344k/9437184k available (7014k kernel code, 1341428k absent, 264412k reserved, 6229k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
NR_IRQS:16640 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 32505856 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1397.119 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.23 BogoMIPS (lpj=5588476)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00aff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26715 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD E1-1200 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (5588.47 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xade7e000-0xaf163fff] (19816448 bytes)
PM: Registering ACPI NVS region [mem 0xaf858000-0xaf85efff] (28672 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
pci 0000:00:01.0: [1002:9809] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 14: [io  0xf000-0xf0ff]
pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io  0xf140-0xf147]
pci 0000:00:11.0: reg 14: [io  0xf130-0xf133]
pci 0000:00:11.0: reg 18: [io  0xf120-0xf127]
pci 0000:00:11.0: reg 1c: [io  0xf110-0xf113]
pci 0000:00:11.0: reg 20: [io  0xf100-0xf10f]
pci 0000:00:11.0: reg 24: [mem 0xfeb4f000-0xfeb4f3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfeb4a000-0xfeb4afff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfeb49000-0xfeb49fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfeb48000-0xfeb480ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [io  0xe000-0xe0ff]
pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:15.2:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE04._PRT]
 pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xade3c000-0xafffffff]
e820: reserve RAM buffer [mem 0xaf858000-0xafffffff]
e820: reserve RAM buffer [mem 0xafc8a000-0xafffffff]
e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x040b] has been reserved
system 00:01: [io  0x04d6] has been reserved
system 00:01: [io  0x0c00-0x0c01] has been reserved
system 00:01: [io  0x0c14] has been reserved
system 00:01: [io  0x0c50-0x0c51] has been reserved
system 00:01: [io  0x0c52] has been reserved
system 00:01: [io  0x0c6c] has been reserved
system 00:01: [io  0x0c6f] has been reserved
system 00:01: [io  0x0cd0-0x0cd1] has been reserved
system 00:01: [io  0x0cd2-0x0cd3] has been reserved
system 00:01: [io  0x0cd4-0x0cd5] has been reserved
system 00:01: [io  0x0cd6-0x0cd7] has been reserved
system 00:01: [io  0x0cd8-0x0cdf] has been reserved
system 00:01: [io  0x0800-0x089f] has been reserved
system 00:01: [io  0x0b20-0x0b3f] has been reserved
system 00:01: [io  0x0900-0x090f] has been reserved
system 00:01: [io  0x0910-0x091f] has been reserved
system 00:01: [io  0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0480-0x049f] has been reserved
system 00:02: [io  0x04a0-0x04af] has been reserved
system 00:02: [io  0x04b0-0x04bf] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:0a: [mem 0xb0000000-0xbfffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:04.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:04.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
pci 0000:00:04.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:04.0:   bridge window [mem 0xd0100000-0xd02fffff]
pci 0000:00:04.0:   bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:15.2:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
pci_bus 0000:02: resource 4 [io  0x0000-0x03af]
pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:02: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:02: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31544k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa84eb000-0xac4eb000] (64MB) mapped at [ffff8800a84eb000-ffff8800ac4eafff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1379055979.716:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 15403
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90012080000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4e000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4c000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb49000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 3a8155c013f798de7084673b6e86215ebed17697'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-09-13 07:06:20 UTC (1379055980)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1168k freed
Freeing unused kernel memory: 1076k freed
usb 3-3: new high-speed USB device number 2 using ehci-pci
udevd[97]: starting version 175
Disabling lock debugging due to kernel taint
[drm] Initialized drm 1.1.0 20060810
usb 3-3: New USB device found, idVendor=0bda, idProduct=0158
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: USB2.0-CRW
usb 3-3: Manufacturer: Generic
usb 3-3: SerialNumber: 20071114173400000
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
scsi1 : ahci
r8169 0000:04:00.0: irq 40 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90001da6000, ec:a8:6b:ad:13:a5, XID 0c900800 IRQ 40
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
wmi: Mapper loaded
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f380 irq 19
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (PALM 0x1002:0x9809 0x1025:0x0592).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
[drm] ACPI VFCT contains a BIOS for 00:01.0 1002:9809, size 15360
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:00:01.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
usb 5-1: new low-speed USB device number 2 using ohci_hcd
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[TTM] Zone  kernel: Available graphics memory: 3944962 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading PALM Microcode
tsc: Refined TSC clocksource calibration: 1397.024 MHz
Switching to clocksource tsc
acpi device:11: registered as cooling_device2
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff88022df4ec00
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff88022df4ec0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 41 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm]   VGA-1
[drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Console: switching to colour frame buffer device 240x67
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
scsi6 : usb-storage 3-3:1.0
usbcore: registered new interface driver ums-realtek
usb 5-1: New USB device found, idVendor=046d, idProduct=c31d
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Keyboard
usb 5-1: Manufacturer: Logitech
usb 3-3: USB disconnect, device number 2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input3
hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:13.0-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/input/input4
hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:13.0-1/input1
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000AAKX-22ERMA0, 17.01H17, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-2 17.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATAPI: ATAPI   DVD A  DH16ACSH, JA11, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            ATAPI    DVD A  DH16ACSH  JA11 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
bio: create slab  at 1
r8169 0000:04:00.0 eth0: link down
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
r8169 0000:04:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Adding 3899388k swap on /dev/mapper/legion-swap_1.  Priority:-1 extents:1 across:3899388k 
udevd[513]: starting version 175
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90001df0b00). heartbeat=60 sec (nowayout=0)
microcode: CPU0: patch_level=0x0500010d
type=1400 audit(1379056006.111:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=625 comm="apparmor_parser"
type=1400 audit(1379056006.111:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=625 comm="apparmor_parser"
type=1400 audit(1379056006.111:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=625 comm="apparmor_parser"
type=1400 audit(1379056006.115:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=682 comm="apparmor_parser"
type=1400 audit(1379056006.115:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=682 comm="apparmor_parser"
type=1400 audit(1379056006.115:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=682 comm="apparmor_parser"
lp: driver loaded but no devices found
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
microcode: CPU1: patch_level=0x0500010d
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
hda_codec: ALC662 rev1: SKU not ready 0x411111f0
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-cups-reload main process (984) terminated with status 1
ppdev: user-space parallel port driver
type=1400 audit(1379056010.359:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1005 comm="apparmor_parser"
type=1400 audit(1379056010.363:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1005 comm="apparmor_parser"
Bridge firewalling registered
device eth0 entered promiscuous mode
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
init: failsafe main process (934) killed by TERM signal
type=1400 audit(1379056014.631:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1446 comm="apparmor_parser"
type=1400 audit(1379056014.631:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1446 comm="apparmor_parser"
type=1400 audit(1379056014.631:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1447 comm="apparmor_parser"
type=1400 audit(1379056014.631:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1447 comm="apparmor_parser"
type=1400 audit(1379056014.639:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1448 comm="apparmor_parser"
type=1400 audit(1379056014.639:15): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1449 comm="apparmor_parser"
type=1400 audit(1379056014.639:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1448 comm="apparmor_parser"
type=1400 audit(1379056014.639:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1449 comm="apparmor_parser"
type=1400 audit(1379056014.639:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1449 comm="apparmor_parser"
type=1400 audit(1379056014.659:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1450 comm="apparmor_parser"
init: kdm main process (1538) killed by TERM signal
postgres (1805): /proc/1805/oom_adj is deprecated, please use /proc/1805/oom_score_adj instead.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
cgroup: libvirtd (1825) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
cgroup: libvirtd (1825) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: libvirtd (1825) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
br0: port 1(eth0) entered forwarding state
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x326 offMax=0xc4c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (2693) terminated with status 1

Return To Gzip System Information