dmesg - 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-30-generic (buildd@akateko) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #44-Ubuntu SMP Thu Aug 22 20:54:42 UTC 2013 (Ubuntu 3.8.0-30.44-generic 3.8.13.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfe7ffff] usable
BIOS-e820: [mem 0x00000000cfe80000-0x00000000cfe97fff] ACPI data
BIOS-e820: [mem 0x00000000cfe98000-0x00000000cfecffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M4A77T, BIOS 2401 05/18/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x430000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000430000000 aka 17152M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x34650000-0x3631ffff]
ACPI: RSDP 000fb510 00024 (v02 ACPIAM)
ACPI: XSDT cfe80100 0005C (v01 051811 XSDT1038 20110518 MSFT 00000097)
ACPI: FACP cfe80290 000F4 (v03 051811 FACP1038 20110518 MSFT 00000097)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
ACPI: DSDT cfe80450 0DB3A (v01 A1540 A1540001 00000001 INTL 20060113)
ACPI: FACS cfe98000 00040
ACPI: APIC cfe80390 0007C (v01 051811 APIC1038 20110518 MSFT 00000097)
ACPI: MCFG cfe80410 0003C (v01 051811 OEMMCFG 20110518 MSFT 00000097)
ACPI: OEMB cfe98040 00072 (v01 051811 OEMB1038 20110518 MSFT 00000097)
ACPI: SRAT cfe8f650 000C8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET cfe8f720 00038 (v01 051811 OEMHPET 20110518 MSFT 00000097)
ACPI: SSDT cfe8f760 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
16260MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xcfe7ffff]
node 0: [mem 0x00000000-0x2fffffff]
On node 0 totalpages: 4193806
free_area_init_node: node 0, pgdat c18f7f00, node_mem_map ec050200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 32521 pages used for memmap
HighMem zone: 3933049 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
e820: [mem 0xcff00000-0xff6fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7b96000 s35008 r0 d22336 u57344
pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4159501
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 35127168 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00430000)
Memory: 16561988k/17563648k available (6258k kernel code, 213236k reserved, 2974k data, 788k init, 15862280k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1905000 - 0xc19ca000 ( 788 kB)
.data : 0xc161c8f0 - 0xc1904240 (2974 kB)
.text : 0xc1000000 - 0xc161c8f0 (6258 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
NR_IRQS:2304 nr_irqs:728 16
CPU 0 irqstacks, hard=f7408000 soft=f740a000
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3255.263 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6510.52 BogoMIPS (lpj=13021052)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26141 entries in 52 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) II X2 255 Processor (fam: 10, model: 06, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f74e8000 soft=f74ea000
Initializing CPU#1
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (13021.05 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfe98000-0xcfecffff] (229376 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
TOM2: 0000000430000000 aka 17152M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0x430000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 24: [mem 0xfbcffc00-0xfbcfffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfbcfe000-0xfbcfefff]
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 10: [mem 0xfbcfd000-0xfbcfdfff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfbcff800-0xfbcff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfbcfc000-0xfbcfcfff]
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 10: [mem 0xfbcfb000-0xfbcfbfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfbcff400-0xfbcff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfbcf4000-0xfbcf7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfbcfa000-0xfbcfafff]
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:94c3] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfbdf0000-0xfbdfffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa10] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfbdec000-0xfbdeffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1102:7006] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:07.0: PCI bridge to [bus 02-03]
pci 0000:00:07.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:03:00.0: [1102:0009] type 00 class 0x040300
pci 0000:03:00.0: reg 10: [mem 0xfbefc000-0xfbefffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:04:00.0: reg 18: [mem 0xfafff000-0xfaffffff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
pci 0000:04:00.0: reg 30: [mem 0xfbff0000-0xfbffffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:0a.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfe80000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0b00-0x0b3f] has been reserved
system 00:08: [io 0x0800-0x089f] has been reserved
system 00:08: [io 0x0b00-0x0b0f] has been reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x0230-0x023f] has been reserved
system 00:09: [io 0x0290-0x029f] has been reserved
system 00:09: [io 0x0300-0x030f] has been reserved
system 00:09: [io 0x0a30-0x0a3f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfefffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:07.0: PCI bridge to [bus 02-03]
pci 0000:00:07.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:0a.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:04: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29504k freed
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1378680778.020:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1424
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfbcff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfbcff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcfe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcfd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcfa000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 6780d094f850d74b33615e841427c3cb80cda14b'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:01: setting system clock to 2013-09-08 22:52:58 UTC (1378680778)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
isapnp: No Plug & Play device found
Freeing unused kernel memory: 788k freed
Write protecting the kernel text: 6260k
Write protecting the kernel read-only data: 2436k
NX-protecting the kernel data: 3980k
udevd[100]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[drm] Initialized drm 1.1.0 20060810
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: irq 43 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168d/8111d at 0xf8428000, bc:ae:c5:8e:06:93, XID 083000c0 IRQ 43
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi3 : ahci
scsi4 : ahci
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff80 irq 22
pata_atiixp 0000:00:14.1: setting latency timer to 64
[drm] initializing kernel modesetting (RV610 0x1002:0x94C3 0x1043:0x01C2).
[drm] register mmio base: 0xFBDF0000
[drm] register mmio size: 65536
ATOM BIOS: 94C3.10.56.00.05.AS03
radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
mtrr: base or size exceeds the MTRR width
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 64bits DDR
scsi6 : pata_atiixp
wmi: Mapper loaded
[TTM] Zone kernel: Available graphics memory: 365012 kiB
[TTM] Zone highmem: Available graphics memory: 8296152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
scsi7 : pata_atiixp
[drm] probing gen 2 caps for device 1002:5978 = 2/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[drm] Loading RV610 Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffc73c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffc73c0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 44 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 0 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DIN-1
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] DFP1: INTERNAL_LVTM1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 4-2: new low-speed USB device number 2 using ohci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB01, max UDMA/100
ata4.00: configured for UDMA/100
ata3.00: ATA-8: WDC WD10EALS-00Z8A0, 05.01D05, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata1.00: ATA-8: OCZ-AGILITY3, 2.25, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.25 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3254.999 MHz
Switching to clocksource tsc
ata2.00: ATA-7: ST3160815AS, 3.ADA, max UDMA/133
ata2.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 31/32)
usb 4-2: New USB device found, idVendor=413c, idProduct=2003
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Dell USB Keyboard
usb 4-2: Manufacturer: Dell
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST3160815AS 3.AD PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA WDC WD10EALS-00Z 05.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input2
hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:12.1-2/input0
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 4-3: new low-speed USB device number 3 using ohci_hcd
usb 4-3: New USB device found, idVendor=09da, idProduct=000a
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: PS/2+USB Mouse
usb 4-3: Manufacturer: A4Tech
input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input3
a4tech 0003:09DA:000A.0002: input,hidraw1: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:12.1-3/input0
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[405]: starting version 175
lp: driver loaded but no devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SOR1 1 (20121018/utaddress-251)
ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 2 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3c
sp5100_tco: failed to find MMIO address, giving up.
usb 3-2: new full-speed USB device number 2 using ohci_hcd
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
type=1400 audit(1378673580.259:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=619 comm="apparmor_parser"
type=1400 audit(1378673580.259:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=619 comm="apparmor_parser"
type=1400 audit(1378673580.259:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=619 comm="apparmor_parser"
microcode: CPU0: patch_level=0x010000b6
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
microcode: CPU0: new patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000b6
microcode: CPU1: new patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: disabled by bios
usb 3-2: New USB device found, idVendor=093a, idProduct=2628
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
gspca_main: gspca_pac7302-2.14.0 probing 093a:2628
input: gspca_pac7302 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/input/input10
usbcore: registered new interface driver gspca_pac7302
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (877) killed by TERM signal
type=1400 audit(1378673581.399:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=977 comm="apparmor_parser"
type=1400 audit(1378673581.399:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=977 comm="apparmor_parser"
type=1400 audit(1378673581.399:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=977 comm="apparmor_parser"
type=1400 audit(1378673581.403:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=981 comm="apparmor_parser"
type=1400 audit(1378673581.403:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=981 comm="apparmor_parser"
type=1400 audit(1378673581.407:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=981 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-cups-reload main process (1019) terminated with status 1
r8169 0000:04:00.0 eth0: link down
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-stop pre-start process (1417) terminated with status 1
r8169 0000:04:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 1-3: new high-speed USB device number 5 using ehci-pci
usb 1-3: New USB device found, idVendor=04e8, idProduct=6860
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: SAMSUNG_Android
usb 1-3: Manufacturer: SAMSUNG
usb 1-3: SerialNumber: f2180d4e
cdc_acm 1-3:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-3:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usb 1-3: USB disconnect, device number 5
usb 1-3: new high-speed USB device number 6 using ehci-pci
usb 1-3: New USB device found, idVendor=04e8, idProduct=6860
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: SAMSUNG_Android
usb 1-3: Manufacturer: SAMSUNG
usb 1-3: SerialNumber: f2180d4e
cdc_acm 1-3:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-3:1.1: ttyACM0: USB ACM device
usb 1-3: USB disconnect, device number 6
usb 1-3: new high-speed USB device number 7 using ehci-pci
usb 1-3: New USB device found, idVendor=04e8, idProduct=685e
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: SAMSUNG_Android
usb 1-3: Manufacturer: SAMSUNG
usb 1-3: SerialNumber: f2180d4e
Initializing USB Mass Storage driver...
scsi8 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 8:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: [sdd] 122807296 512-byte logical blocks: (62.8 GB/58.5 GiB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 0f 00 00 00
sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: unknown partition table
sd 8:0:0:0: [sdd] Attached SCSI removable disk
usb 1-3: USB disconnect, device number 7
sd 8:0:0:0: [sdd] Synchronizing SCSI cache
sd 8:0:0:0: [sdd]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 2-4: new high-speed USB device number 2 using ehci-pci
usb 2-4: New USB device found, idVendor=0bda, idProduct=0119
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: USB2.0-CRW
usb 2-4: Manufacturer: Generic
usb 2-4: SerialNumber: 20090815198100000
scsi9 : usb-storage 2-4:1.0
scsi 9:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 9:0:0:0: Attached scsi generic sg4 type 0
sd 9:0:0:0: [sdd] 122809344 512-byte logical blocks: (62.8 GB/58.5 GiB)
sd 9:0:0:0: [sdd] Write Protect is off
sd 9:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 9:0:0:0: [sdd] No Caching mode page present
sd 9:0:0:0: [sdd] Assuming drive cache: write through
sd 9:0:0:0: [sdd] No Caching mode page present
sd 9:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 9:0:0:0: [sdd] No Caching mode page present
sd 9:0:0:0: [sdd] Assuming drive cache: write through
sd 9:0:0:0: [sdd] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 2
usb 2-4: new high-speed USB device number 3 using ehci-pci
usb 2-4: New USB device found, idVendor=0bda, idProduct=0119
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: USB2.0-CRW
usb 2-4: Manufacturer: Generic
usb 2-4: SerialNumber: 20090815198100000
scsi10 : usb-storage 2-4:1.0
scsi 10:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:0: [sdd] 122809344 512-byte logical blocks: (62.8 GB/58.5 GiB)
sd 10:0:0:0: [sdd] Write Protect is off
sd 10:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 10:0:0:0: [sdd] No Caching mode page present
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sd 10:0:0:0: [sdd] No Caching mode page present
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 10:0:0:0: [sdd] No Caching mode page present
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sd 10:0:0:0: [sdd] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 3
usb 1-3: new high-speed USB device number 8 using ehci-pci
usb 1-3: New USB device found, idVendor=04e8, idProduct=685e
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: SAMSUNG_Android
usb 1-3: Manufacturer: SAMSUNG
usb 1-3: SerialNumber: f2180d4e
scsi11 : usb-storage 1-3:1.0
usb 1-3: USB disconnect, device number 8
usb 2-4: new high-speed USB device number 4 using ehci-pci
usb 2-4: New USB device found, idVendor=125f, idProduct=a91a
usb 2-4: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 2-4: Product: Portable HDD CH91
usb 2-4: Manufacturer: A-DATA
usb 2-4: SerialNumber: MA6116VE4018
scsi12 : usb-storage 2-4:1.0
usb 2-4: USB disconnect, device number 4
usb 2-4: new high-speed USB device number 5 using ehci-pci
usb 2-4: New USB device found, idVendor=125f, idProduct=a91a
usb 2-4: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 2-4: Product: Portable HDD CH91
usb 2-4: Manufacturer: A-DATA
usb 2-4: SerialNumber: MA6116VE4018
scsi13 : usb-storage 2-4:1.0
scsi 13:0:0:0: Direct-Access A-DATA HDD CH91 PQ: 0 ANSI: 0
sd 13:0:0:0: Attached scsi generic sg4 type 0
sd 13:0:0:0: [sdd] 625142447 512-byte logical blocks: (320 GB/298 GiB)
sd 13:0:0:0: [sdd] Write Protect is off
sd 13:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 13:0:0:0: [sdd] No Caching mode page present
sd 13:0:0:0: [sdd] Assuming drive cache: write through
sd 13:0:0:0: [sdd] No Caching mode page present
sd 13:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 13:0:0:0: [sdd] No Caching mode page present
sd 13:0:0:0: [sdd] Assuming drive cache: write through
sd 13:0:0:0: [sdd] Attached SCSI disk
usb 2-4: USB disconnect, device number 5
usb 6-1: new full-speed USB device number 2 using ohci_hcd
usb 6-1: not running at top speed; connect to a high speed hub
usb 6-1: New USB device found, idVendor=125f, idProduct=a91a
usb 6-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 6-1: Product: Portable HDD CH91
usb 6-1: Manufacturer: A-DATA
usb 6-1: SerialNumber: MA6116VE4018
scsi14 : usb-storage 6-1:1.0
scsi 14:0:0:0: Direct-Access A-DATA HDD CH91 PQ: 0 ANSI: 0
sd 14:0:0:0: Attached scsi generic sg4 type 0
sd 14:0:0:0: [sdd] 625142447 512-byte logical blocks: (320 GB/298 GiB)
sd 14:0:0:0: [sdd] Write Protect is off
sd 14:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 14:0:0:0: [sdd] No Caching mode page present
sd 14:0:0:0: [sdd] Assuming drive cache: write through
sd 14:0:0:0: [sdd] No Caching mode page present
sd 14:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
usb 6-1: reset full-speed USB device number 2 using ohci_hcd
sd 14:0:0:0: [sdd] No Caching mode page present
sd 14:0:0:0: [sdd] Assuming drive cache: write through
sd 14:0:0:0: [sdd] Attached SCSI disk
usb 6-1: reset full-speed USB device number 2 using ohci_hcd
usb 1-3: new high-speed USB device number 9 using ehci-pci
usb 1-3: New USB device found, idVendor=04e8, idProduct=685e
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: SAMSUNG_Android
usb 1-3: Manufacturer: SAMSUNG
usb 1-3: SerialNumber: f2180d4e
scsi15 : usb-storage 1-3:1.0
scsi 15:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg5 type 0
sd 15:0:0:0: [sde] 122807296 512-byte logical blocks: (62.8 GB/58.5 GiB)
sd 15:0:0:0: [sde] Write Protect is off
sd 15:0:0:0: [sde] Mode Sense: 0f 00 00 00
sd 15:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: unknown partition table
sd 15:0:0:0: [sde] Attached SCSI removable disk
usb 1-3: USB disconnect, device number 9
sd 15:0:0:0: [sde] Synchronizing SCSI cache
sd 15:0:0:0: [sde]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
audit_printk_skb: 33 callbacks suppressed
type=1400 audit(1378684041.534:22): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=3892 comm="apparmor_parser"
type=1400 audit(1378684041.534:23): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam///usr/sbin/mysqld" pid=3892 comm="apparmor_parser"
vlc[7422]: segfault at 4 ip b1a89625 sp bfec4bc0 error 4 in libQtDBus.so.4.8.4[b1a49000+7c000]
usb 6-1: reset full-speed USB device number 2 using ohci_hcd
usb 6-1: reset full-speed USB device number 2 using ohci_hcd
usb 6-1: reset full-speed USB device number 2 using ohci_hcd
usb 6-1: device descriptor read/64, error -110
usb 6-1: device descriptor read/64, error -110
usb 6-1: reset full-speed USB device number 2 using ohci_hcd
usb 6-1: device descriptor read/64, error -110
usb 6-1: device descriptor read/64, error -110
usb 6-1: reset full-speed USB device number 2 using ohci_hcd
usb 6-1: device descriptor read/8, error -110
usb 6-1: device descriptor read/8, error -110
usb 6-1: reset full-speed USB device number 2 using ohci_hcd
usb 6-1: device descriptor read/8, error -110
usb 6-1: device descriptor read/8, error -110
sd 14:0:0:0: Device offlined - not ready after error recovery
usb 6-1: USB disconnect, device number 2
sd 14:0:0:0: [sdd] Unhandled error code
sd 14:0:0:0: [sdd]
Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
sd 14:0:0:0: [sdd] CDB:
Read(10): 28 00 0c 9b ed cf 00 00 01 00
end_request: I/O error, dev sdd, sector 211545551
FAT-fs (sdd1): Directory bread(block 211545488) failed
FAT-fs (sdd1): Directory bread(block 211545489) failed
FAT-fs (sdd1): Directory bread(block 211545490) failed
FAT-fs (sdd1): Directory bread(block 211545491) failed
FAT-fs (sdd1): Directory bread(block 211545492) failed
FAT-fs (sdd1): Directory bread(block 211545493) failed
FAT-fs (sdd1): Directory bread(block 211545494) failed
FAT-fs (sdd1): Directory bread(block 211545495) failed
FAT-fs (sdd1): Directory bread(block 211545496) failed
FAT-fs (sdd1): Directory bread(block 211545497) failed
usb 6-1: new full-speed USB device number 3 using ohci_hcd
usb 6-1: device descriptor read/64, error -110
usb 6-1: device descriptor read/64, error -110
usb 6-1: new full-speed USB device number 4 using ohci_hcd
usb 6-1: device descriptor read/64, error -110
usb 6-1: device descriptor read/64, error -110
usb 6-1: new full-speed USB device number 5 using ohci_hcd
usb 6-1: device descriptor read/8, error -110
usb 6-1: device descriptor read/8, error -110
usb 6-1: new full-speed USB device number 6 using ohci_hcd
usb 6-1: device descriptor read/8, error -110
usb 6-1: device descriptor read/8, error -110
hub 6-0:1.0: unable to enumerate USB device on port 1