dmesg - 130907
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 00:26:11 UTC 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000afee0000 (usable)
BIOS-e820: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
BIOS-e820: 00000000afee3000 - 00000000afef0000 (ACPI data)
BIOS-e820: 00000000afef0000 - 00000000aff00000 (reserved)
BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 0100000000 mask FFC0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000140000000 aka 5120M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xafee0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000afee0000
0000000000 - 00afe00000 page 2M
00afe00000 - 00afee0000 page 4k
kernel direct mapping tables up to afee0000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ b000-11000
RAMDISK: 37611000 - 37fef156
ACPI: RSDP 00000000000f7030 00024 (v02 DELL )
ACPI: XSDT 00000000afee3100 00054 (v01 DELL AS09 42302E31 AWRD 00000000)
ACPI: FACP 00000000afee9380 000F4 (v03 DELL AS09 42302E31 AWRD 00000000)
ACPI: DSDT 00000000afee3280 060B7 (v01 DELL AS09 00001000 MSFT 03000000)
ACPI: FACS 00000000afee0000 00040
ACPI: SLIC 00000000afee9580 00176 (v01 DELL AS09 42302E31 AWRD 00000000)
ACPI: SSDT 00000000afee9740 00248 (v01 DELL AS09 00000001 LTP 00000001)
ACPI: HPET 00000000afee9a00 00038 (v01 DELL AS09 42302E31 AWRD 00000098)
ACPI: MCFG 00000000afee9a80 0003C (v01 DELL AS09 42302E31 AWRD 00000000)
ACPI: APIC 00000000afee94c0 0007C (v01 DELL AS09 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
NODE_DATA [000000000000c000 - 0000000000013fff]
bootmap [0000000000014000 - 000000000003bfff] pages 28
(8 early reservations) ==> bootmem [0000000000 - 0140000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00016db584] TEXT DATA BSS ==> [0001000000 - 00016db584]
#3 [0037611000 - 0037fef156] RAMDISK ==> [0037611000 - 0037fef156]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [00016dc000 - 00016dc100] BRK ==> [00016dc000 - 00016dc100]
#6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
found SMP MP-table at [ffff8800000f4c70] f4c70
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004dfffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000afee0
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 982655
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3839 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 702232 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfefff000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000afee0000 - 00000000afee3000
PM: Registered nosave memory: 00000000afee3000 - 00000000afef0000
PM: Registered nosave memory: 00000000afef0000 - 00000000aff00000
PM: Registered nosave memory: 00000000aff00000 - 00000000b0000000
PM: Registered nosave memory: 00000000b0000000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880005000000 s90392 r8192 d24296 u1048576
pcpu-alloc: s90392 r8192 d24296 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 964631
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ 6096000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 3791972k/5242880k available (3087k kernel code, 1312260k absent, 138648k reserved, 2053k data, 592k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:424
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2310.329 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4620.65 BogoMIPS (lpj=9241316)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 00aff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01
Brought up 2 CPUs
Total of 2 processors activated (9241.61 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: group ffff88000500fbf0 cpus 0 group ffff88000510fbf0 cpus 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: group ffff88000510fbf0 cpus 1 group ffff88000500fbf0 cpus 0
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 0: io port [9000, ffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, efffffff]
node 0 link 0: mmio [f4000000, fe02ffff]
node 0 link 0: mmio [f0000000, f03fffff]
TOM2: 0000000140000000 aka 5120M
bus: [00,03] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [c0000000, f3ffffff]
bus: 00 index 3 mmio: [f4000000, ffffffff]
bus: 00 index 4 mmio: [140000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xfe024000-0xfe027fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
pci 0000:00:07.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
pci 0000:00:07.0: reg 14 io port: [0xec00-0xec07]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7]
pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3]
pci 0000:00:08.0: reg 18 io port: [0x970-0x977]
pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73]
pci 0000:00:08.0: reg 20 io port: [0xd800-0xd80f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
pci 0000:00:08.1: reg 10 io port: [0x9e0-0x9e7]
pci 0000:00:08.1: reg 14 io port: [0xbe0-0xbe3]
pci 0000:00:08.1: reg 18 io port: [0x960-0x967]
pci 0000:00:08.1: reg 1c io port: [0xb60-0xb63]
pci 0000:00:08.1: reg 20 io port: [0xc400-0xc40f]
pci 0000:00:08.1: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0d.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
pci 0000:00:0d.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:0d.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:00:04.0: transparent bridge
pci 0000:00:04.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:04.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
pci 0000:00:04.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff]
pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
pci 0000:00:09.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfdbfe000-0xfdbfffff]
pci 0000:03:00.0: PME# supported from D0 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:0b.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1080-0x10ff has been reserved
system 00:01: ioport range 0x1400-0x147f has been reserved
system 00:01: ioport range 0x1480-0x14ff has been reserved
system 00:01: ioport range 0x1800-0x187f has been reserved
system 00:01: ioport range 0x1880-0x18ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x294-0x297 has been reserved
system 00:08: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:09: iomem range 0xcf000-0xcffff has been reserved
system 00:09: iomem range 0xf0000-0xf7fff could not be reserved
system 00:09: iomem range 0xf8000-0xfbfff could not be reserved
system 00:09: iomem range 0xfc000-0xfffff could not be reserved
system 00:09: iomem range 0xfefff000-0xfefff0ff has been reserved
system 00:09: iomem range 0xafee0000-0xafefffff could not be reserved
system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
system 00:09: iomem range 0x0-0x9ffff could not be reserved
system 00:09: iomem range 0x100000-0xafedffff could not be reserved
system 00:09: iomem range 0xafef0000-0xbfeeffff could not be reserved
system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:09: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:09: iomem range 0xfff80000-0xfff80fff has been reserved
system 00:09: iomem range 0xfff90000-0xfffbffff has been reserved
system 00:09: iomem range 0xfffed000-0xfffeffff has been reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: 0xb000-0xbfff
pci 0000:00:04.0: MEM window: 0xfd900000-0xfd9fffff
pci 0000:00:04.0: PREFETCH window: 0xfde00000-0xfdefffff
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: 0xa000-0xafff
pci 0000:00:09.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:09.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: 0x9000-0x9fff
pci 0000:00:0b.0: MEM window: 0xfdb00000-0xfdbfffff
pci 0000:00:0b.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:01: resource 1 mem: [0xfd900000-0xfd9fffff]
pci_bus 0000:01: resource 2 pref mem [0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff]
pci_bus 0000:03: resource 2 pref mem [0xfda00000-0xfdafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:02.0: PCI INT A disabled
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:02.1: PCI INT B disabled
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Boot video device
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
pci 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
pci 0000:03:00.0: PCI INT A disabled
Unpacking initramfs...
Freeing initrd memory: 10104k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1378571494.592:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7425
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
Linux agpgart interface v0.103
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2013-09-07 16:31:35 UTC (1378571495)
Initalizing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 4252k
udev[81]: starting version 164
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:07.0: setting latency timer to 64
xhci_hcd 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:03:00.0: setting latency timer to 64
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: irq 16, io mem 0xfdbfe000
usb usb1: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb1: New USB device found, idVendor=1d6b, idProduct=0003
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:03:00.0
usb usb1: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
libata version 3.00 loaded.
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (15 C)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:a0:4b:4e:b8
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:02.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:08.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 21
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 21
ata2: port disabled. ignoring.
usb 2-2: new high speed USB device using ehci_hcd and address 3
usb 2-2: New USB device found, idVendor=090c, idProduct=1000
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: USB DISK
usb 2-2: Manufacturer: SMI Corporation
usb 2-2: SerialNumber: AA04012800007466
usb 2-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata5.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
usb 2-5: new high speed USB device using ehci_hcd and address 4
usb 2-5: New USB device found, idVendor=0644, idProduct=0200
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: CA-200
usb 2-5: Manufacturer: TEAC
usb 2-5: SerialNumber: 000001101518
usb 2-5: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 2-8: new high speed USB device using ehci_hcd and address 6
usb 2-8: New USB device found, idVendor=0781, idProduct=5580
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-8: Product: Extreme
usb 2-8: Manufacturer: SanDisk
usb 2-8: SerialNumber: AA010821121104254820
usb 2-8: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb 3-1: new low speed USB device using ohci_hcd and address 2
usb 3-1: New USB device found, idVendor=192f, idProduct=0916
usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 3-1: configuration #1 chosen from 1 choice
usb 3-7: new low speed USB device using ohci_hcd and address 3
usb 3-7: New USB device found, idVendor=045e, idProduct=00b4
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-7: Product: Microsoft® Digital Media Keyboard
usb 3-7: Manufacturer: Microsoft
usb 3-7: configuration #1 chosen from 1 choice
ata3: link is slow to respond, please be patient (ready=0)
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access USB Stick 2.0 ME 1100 PQ: 0 ANSI: 0 CCS
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0
scsi 7:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0
scsi 7:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0
scsi 7:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0
sd 6:0:0:0: [sda] 15858688 512-byte logical blocks: (8.11 GB/7.56 GiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] Attached SCSI removable disk
sd 7:0:0:0: [sdb] Attached SCSI removable disk
sd 7:0:0:1: [sdc] Attached SCSI removable disk
sd 7:0:0:2: [sdd] Attached SCSI removable disk
sd 7:0:0:3: [sde] Attached SCSI removable disk
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 8:0:0:0: [sdf] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 8:0:0:0: [sdf] Write Protect is off
sd 8:0:0:0: [sdf] Mode Sense: 53 00 00 08
sd 8:0:0:0: [sdf] Assuming drive cache: write through
sd 8:0:0:0: [sdf] Assuming drive cache: write through
sdf: sdf1 sdf2
sd 8:0:0:0: [sdf] Assuming drive cache: write through
sd 8:0:0:0: [sdf] Attached SCSI removable disk
ata3: SRST failed (errno=-16)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: Patriot Torqx 2 32GB SSD, S5FAM007, max UDMA/100
ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA Patriot Torqx 2 S5FA PQ: 0 ANSI: 5
sd 2:0:0:0: [sdg] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 2:0:0:0: [sdg] Write Protect is off
sd 2:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: sdg1 sdg2
sd 2:0:0:0: [sdg] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-9: WDC WD30EZRX-00DC0B0, 80.00A80, max UDMA/133
ata4.00: 5860533168 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 80.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdh] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
scsi 4:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdh] 4096-byte physical blocks
sd 4:0:0:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdh] Write Protect is off
sd 3:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdi] Write Protect is off
sdh:
sd 4:0:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdi: sdi1 sdi2 sdi3 sdi4 < sdi5 sdi6 >
sd 4:0:0:0: [sdi] Attached SCSI disk
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222BB SB00 PQ: 0 ANSI: 5
sdh1 sdh2 sdh3 sdh4
sd 3:0:0:0: [sdh] Attached SCSI disk
usbcore: registered new interface driver hiddev
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input1
generic-usb 0003:192F:0916.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-1/input0
input: Microsoft Microsoft® Digital Media Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-7/3-7:1.0/input/input2
generic-usb 0003:045E:00B4.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Keyboard ] on usb-0000:00:02.0-7/input0
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 7:0:0:0: Attached scsi generic sg1 type 0
sd 7:0:0:1: Attached scsi generic sg2 type 0
sd 7:0:0:2: Attached scsi generic sg3 type 0
sd 7:0:0:3: Attached scsi generic sg4 type 0
sd 8:0:0:0: Attached scsi generic sg5 type 0
sd 2:0:0:0: Attached scsi generic sg6 type 0
sd 3:0:0:0: Attached scsi generic sg7 type 0
sd 4:0:0:0: Attached scsi generic sg8 type 0
sr 5:0:0:0: Attached scsi generic sg9 type 5
input: Microsoft Microsoft® Digital Media Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-7/3-7:1.1/input/input3
generic-usb 0003:045E:00B4.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Keyboard ] on usb-0000:00:02.0-7/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 6914.000 MB/sec
xor: using function: generic_sse (6914.000 MB/sec)
raid6: int64x1 2105 MB/s
raid6: int64x2 2683 MB/s
raid6: int64x4 2102 MB/s
raid6: int64x8 1924 MB/s
raid6: sse2x1 1126 MB/s
raid6: sse2x2 1902 MB/s
raid6: sse2x4 2831 MB/s
raid6: using algorithm sse2x4 (2831 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 800c0910 to a partition!
mdadm: sending ioctl 800c0910 to a partition!
md: md0 stopped.
md: bind
raid1: raid set md0 active with 1 out of 2 mirrors
md0: detected capacity change from 0 to 805305180160
md0: unknown partition table
EXT4-fs (sdg1): mounted filesystem with ordered data mode
udev[568]: starting version 164
processor LNXCPU:00: registered as cooling_device1
processor LNXCPU:01: registered as cooling_device2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c40
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
EDAC MC: Ver: 2.1.0 Feb 24 2013
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
EDAC amd64_edac: Ver: 3.2.0 Feb 24 2013
[drm] Initialized drm 1.1.0 20060810
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22
nouveau 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 22 (level, low) -> IRQ 22
nouveau 0000:00:0d.0: setting latency timer to 64
[drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2)
[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PROM
[drm] nouveau 0000:00:0d.0: ... BIOS signature not found
[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:00:0d.0: ... appears to be valid
[drm] nouveau 0000:00:0d.0: BIT BIOS found
[drm] nouveau 0000:00:0d.0: Bios version 05.61.32.25
[drm] nouveau 0000:00:0d.0: BIT table 'd' not found
[drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:00:0d.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:00:0d.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07
[drm] nouveau 0000:00:0d.0: 2: 0x00000110: type 0x10 idx 1 tag 0xff
[drm] nouveau 0000:00:0d.0: 3: 0x00000111: type 0x11 idx 1 tag 0xff
[drm] nouveau 0000:00:0d.0: 4: 0x00000113: type 0x13 idx 1 tag 0xff
[drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023
[drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 98830003
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDEB3
[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xE00A
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xE00B
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xE18D
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xE1D6
[TTM] Zone kernel: Available graphics memory: 1901336 kiB.
[drm] nouveau 0000:00:0d.0: 256 MiB VRAM
[drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
[drm] nouveau 0000:00:0d.0: Allocating FIFO number 0
[drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:00:0d.0: Initial CRTC_OWNER is 0
[drm] nouveau 0000:00:0d.0: Saving VGA fonts
[drm] nouveau 0000:00:0d.0: DCB type 4 not known
[drm] nouveau 0000:00:0d.0: Detected a VGA connector
[drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: allocated 1600x1200 fb: 0x49000, bo ffff88013eb82200
[drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A
Console: switching to colour frame buffer device 200x75
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.15 20090420 for 0000:00:0d.0 on minor 0
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:05.0: setting latency timer to 64
hda_codec: ALC888: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input6
loop: module loaded
input: PC Speaker as /devices/platform/pcspkr/input/input7
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
EXT4-fs (sdh1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdh1): mounted filesystem with ordered data mode
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Adding 4194296k swap on /media/DAT/swap0. Priority:-1 extents:4 across:4464632k
fuse init (API version 7.13)
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
forcedeth 0000:00:07.0: irq 26 for MSI/MSI-X
eth0: no link during initialization.
ADDRCONF(NETDEV_UP): eth0: link is not ready
kvm: Nested Virtualization enabled
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xf (2300 MHz), vid 0xc
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xd
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xf
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x11
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[drm] nouveau 0000:00:0d.0: Allocating FIFO number 1
[drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 1
Clocksource tsc unstable (delta = -72785070 ns)
CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
eth0: link down.
eth0: link down.
NMI watchdog is permanently disabled
[drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A
eth0: link up.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] nouveau 0000:00:0d.0: Setting dpms mode 1 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)