dmesg - 1200
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@panlong) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:19:42 UTC 2013 (Ubuntu 3.8.0-19.29-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dddd9fff] usable
BIOS-e820: [mem 0x00000000dddda000-0x00000000ddfd0fff] reserved
BIOS-e820: [mem 0x00000000ddfd1000-0x00000000ddfe0fff] ACPI data
BIOS-e820: [mem 0x00000000ddfe1000-0x00000000de103fff] ACPI NVS
BIOS-e820: [mem 0x00000000de104000-0x00000000de86dfff] reserved
BIOS-e820: [mem 0x00000000de86e000-0x00000000de86efff] usable
BIOS-e820: [mem 0x00000000de86f000-0x00000000de8b1fff] ACPI NVS
BIOS-e820: [mem 0x00000000de8b2000-0x00000000decd3fff] usable
BIOS-e820: [mem 0x00000000decd4000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: ASUSTeK Computer INC. CM6330_CM6630_CM6730_CM6830-8/CM6330_CM6630_CM6730_CM6830, BIOS 0402 08/27/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FF0000000 write-back
2 base 210000000 mask FF8000000 write-back
3 base 218000000 mask FFC000000 write-back
4 base 21C000000 mask FFE000000 write-back
5 base 21E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 256MB, type WB
reg 2, base: 8448MB, range: 128MB, type WB
reg 3, base: 8576MB, range: 64MB, type WB
reg 4, base: 8640MB, range: 32MB, type WB
reg 5, base: 8672MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 8176M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8688MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [c00fd830]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x7eaef000-0x7fffefff]
Allocated new RAMDISK: [mem 0x366ee000-0x37bfd2ad]
Move RAMDISK from [mem 0x7eaef000-0x7fffe2ad] to [mem 0x366ee000-0x37bfd2ad]
ACPI: RSDP 000f0490 00024 (v02 ALASKA)
ACPI: XSDT ddfd4080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP ddfde740 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT ddfd4188 0A5B3 (v02 ALASKA A M I 00000021 INTL 20051117)
ACPI: FACS de102080 00040
ACPI: APIC ddfde850 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT ddfde8c8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG ddfde910 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET ddfde950 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT ddfde988 00495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT ddfdee20 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT ddfdf7d0 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MSDM ddfe0268 00055 (v01 ALASKA A M I 01072009 00000000)
ACPI: DMAR ddfe02c0 00078 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: BGRT ddfe0338 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
7796MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x1effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xdddd9fff]
node 0: [mem 0xde86e000-0xde86efff]
node 0: [mem 0xde8b2000-0xdecd3fff]
node 0: [mem 0xdeff4000-0xdeffffff]
node 0: [mem 0x00000000-0x1effffff]
On node 0 totalpages: 2085270
free_area_init_node: node 0, pgdat c18f6100, node_mem_map f230d200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 15593 pages used for memmap
HighMem zone: 1841442 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f22c2000 s35008 r0 d22336 u57344
pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2067893
Kernel command line: initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
allocated 17792896 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0021f000)
Memory: 8220544k/8896512k available (6251k kernel code, 120536k reserved, 2973k data, 784k init, 7428140k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1903000 - 0xc19c7000 ( 784 kB)
.data : 0xc161ad30 - 0xc19023c0 (2973 kB)
.text : 0xc1000000 - 0xc161ad30 (6251 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f0c08000 soft=f0c0a000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3093.219 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.43 BogoMIPS (lpj=12372876)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26115 entries in 52 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3350P CPU @ 3.10GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
CPU 1 irqstacks, hard=f0d08000 soft=f0d0a000
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1
CPU 2 irqstacks, hard=f0d84000 soft=f0d86000
Initializing CPU#2
#2
CPU 3 irqstacks, hard=f0dd2000 soft=f0dd4000
#3 OK
Initializing CPU#3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (24745.75 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xddfe1000-0xde103fff] (1191936 bytes)
PM: Registering ACPI NVS region [mem 0xde86f000-0xde8b1fff] (274432 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT ddf82018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT ddf83a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT ddf81d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf7309000-0xf730900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7307000-0xf73073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7300000-0xf7303fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7306000-0xf73063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7305000-0xf73050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
pci 0000:01:00.0: [10de:1049] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xf7200000-0xf7207fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:05:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:00:1c.4: PCI bridge to [bus 05-06] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:07:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:07:00.0: reg 10: [io 0xc050-0xc057]
pci 0000:07:00.0: reg 14: [io 0xc040-0xc043]
pci 0000:07:00.0: reg 18: [io 0xc030-0xc037]
pci 0000:07:00.0: reg 1c: [io 0xc020-0xc023]
pci 0000:07:00.0: reg 20: [io 0xc000-0xc01f]
pci 0000:07:00.0: reg 24: [mem 0xf7100000-0xf71001ff]
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05.P8P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdddda000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde86f000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdecd4000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] has been reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xe0000000-0xe0000fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:00:1c.4: PCI bridge to [bus 05-06]
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:05:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:06: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:06: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:06: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:06: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:06: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:06: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:06: resource 17 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21568k freed
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000ddf48000 end: 0x000000ddf64fff
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1377602057.640:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1589
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
ata_piix 0000:00:1f.5: MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7307000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7306000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
isapnp: No Plug & Play device found
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fceb9fd088cf158e29d83343e1c98bf8ab23d94a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:05: setting system clock to 2013-08-27 11:14:18 UTC (1377602058)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3: SATA link down (SStatus 0 SControl 330)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
ata4.00: ATAPI: ASUS DVD RAM GH92N, AS00, max UDMA/100
ata4.00: configured for UDMA/100
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 3092.973 MHz
Switching to clocksource tsc
usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0158
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB2.0-CRW
usb 1-1.3: Manufacturer: Generic
usb 1-1.3: SerialNumber: 20071114173400000
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=0461, idProduct=0010
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Keyboard
usb 2-1.1: Manufacturer: NOVATEK
usb 2-1.2: new low-speed USB device number 4 using ehci-pci
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c054
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Optical Mouse
usb 2-1.2: Manufacturer: Logitech
usb 2-1.5: new high-speed USB device number 5 using ehci-pci
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link down (SStatus 0 SControl 330)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 0 SControl 330)
ata2.01: SATA link down (SStatus 0 SControl 0)
scsi 3:0:0:0: CD-ROM ASUS DVD RAM GH92N AS00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 784k freed
Write protecting the kernel text: 6252k
Write protecting the kernel read-only data: 2432k
NX-protecting the kernel data: 3988k
udevd[118]: starting version 175
usb 2-1.5: New USB device found, idVendor=13fe, idProduct=4100
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: Silicon-Power8G
usb 2-1.5: Manufacturer: UFD 2.0
usb 2-1.5: SerialNumber: 12061006044E600269DACCF3383
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
Disabling lock debugging due to kernel taint
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-1.5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 46 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xf842a000, 30:85:a9:a8:ab:41, XID 0c900800 IRQ 46
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.1/input0
ahci 0000:07:00.0: version 3.0
ahci 0000:07:00.0: irq 47 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata5: SATA max UDMA/133 abar m512@0xf7100000 port 0xf7100100 irq 47
ata6: SATA max UDMA/133 abar m512@0xf7100000 port 0xf7100180 irq 47
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input3
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d9090a1
nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
nouveau [ DEVICE][0000:01:00.0] Family : NVD0
hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.1/input1
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
hid-generic 0003:046D:C054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
scsi5 : usb-storage 1-1.3:1.0
usbcore: registered new interface driver ums-realtek
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 75.19.66.00.06
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
usb 1-1.3: USB disconnect, device number 3
[TTM] Zone kernel: Available graphics memory: 407390 kiB
[TTM] Zone highmem: Available graphics memory: 4121460 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] BIT BIOS found
nouveau [ DRM] Bios version 75.19.66.00
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000300 00000000
nouveau [ DRM] DCB outp 01: 01000302 00020030
nouveau [ DRM] DCB outp 02: 02011362 00020010
nouveau [ DRM] DCB outp 03: 04022310 00000000
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002161
nouveau [ DRM] DCB conn 02: 00000200
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 2 available performance level(s)
nouveau [ DRM] 1: core 270MHz shader 540MHz memory 405MHz voltage 900mV
nouveau [ DRM] 3: core 810MHz shader 1620MHz memory 800MHz voltage 1040mV
nouveau [ DRM] c: core 270MHz shader 540MHz memory 405MHz voltage 900mV
nouveau [ DRM] MM: using COPY0 for buffer copies
nouveau [ DRM] allocated 1920x1080 fb: 0x60000, bo f77d7200
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-8: WDC WD10EALX-229BA0, 15.01H15, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA WDC WD10EALX-229 15.0 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 6:0:0:0: [sda] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: Direct-Access UFD 2.0 Silicon-Power8G PMAP PQ: 0 ANSI: 4
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
xor: automatically using best checksumming function:
avx : 24499.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
squashfs: version 4.0 (2009/01/31) Phillip Lougher
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[1316]: starting version 175
device-mapper: multipath: version 1.5.1 loaded
init: avahi-cups-reload main process (1606) terminated with status 1
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 48 for MSI/MSI-X
init: failsafe main process (1534) killed by TERM signal
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
lp: driver loaded but no devices found
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
ppdev: user-space parallel port driver
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0[ 18.643964] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
asus_wmi: Disabling ACPI video driver
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20121018/utaddress-251)
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_GPE.GPIO 3 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
kvm: disabled by bios
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
init: alsa-restore main process (1789) terminated with status 99
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ubuntu-geoip-pr[3928]: segfault at abcdef ip 00abcdef sp bfba59bc error 14 in ubuntu-geoip-provider[8048000+4000]
systemd-hostnamed[6208]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[13495]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!