dmesg - dcrawunique
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.7-031007-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201308150319 SMP Thu Aug 15 07:20:26 UTC 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
BIOS-e820: [mem 0x00000000bf780000-0x00000000bf78dfff] ACPI data
BIOS-e820: [mem 0x00000000bf78e000-0x00000000bf7cffff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
BIOS-e820: [mem 0x00000000bf7ed000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Packard Bell imedia S3810/imedia S3810, BIOS P01-A1 03/31/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-E7FFF write-through
E8000-EBFFF write-protect
EC000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
total RAM covered: 8192M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 1GB, type WB
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fca000, 0x01fcafff] PGTABLE
BRK [0x01fcb000, 0x01fcbfff] PGTABLE
BRK [0x01fcc000, 0x01fccfff] PGTABLE
init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[mem 0x23fe00000-0x23fffffff] page 2M
BRK [0x01fcd000, 0x01fcdfff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[mem 0x23c000000-0x23fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbf5fffff] page 2M
[mem 0xbf600000-0xbf77ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01fce000, 0x01fcefff] PGTABLE
RAMDISK: [mem 0x35a04000-0x36cf9fff]
ACPI: RSDP 00000000000fa660 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf780100 0006C (v01 ACRSYS ACRPRDCT 20100331 MSFT 00000097)
ACPI: FACP 00000000bf780290 000F4 (v04 ACRSYS FACP1128 20100331 MSFT 00000097)
ACPI: DSDT 00000000bf7805e0 0723D (v02 A12A1 A12A1010 00000010 INTL 20051117)
ACPI: FACS 00000000bf78e000 00040
ACPI: APIC 00000000bf780390 0008C (v02 ACRSYS APIC1128 20100331 MSFT 00000097)
ACPI: MCFG 00000000bf780420 0003C (v01 ACRSYS OEMMCFG 20100331 MSFT 00000097)
ACPI: SLIC 00000000bf780460 00176 (v01 ACRSYS ACRPRDCT 20100331 MSFT 00000097)
ACPI: OEMB 00000000bf78e040 00072 (v01 ACRSYS OEMB1128 20100331 MSFT 00000097)
ACPI: HPET 00000000bf78a5e0 00038 (v01 ACRSYS OEMHPET 20100331 MSFT 00000097)
ACPI: GSCI 00000000bf78e0c0 02024 (v01 ACRSYS GMCHSCI 20100331 MSFT 00000097)
ACPI: AWMI 00000000bf7900f0 0004E (v01 ACRSYS OEMB1128 20100331 MSFT 00000097)
ACPI: SSDT 00000000bf791980 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x00000000-0x23fffffff]
NODE_DATA [mem 0x23fff5000-0x23fff9fff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbf77ffff]
node 0: [mem 0x100000000-0x23fffffff]
On node 0 totalpages: 2094876
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12190 pages used for memmap
DMA32 zone: 780160 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000
PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000
PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
e820: [mem 0xc0000000-0xfed1ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88023fc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062121
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8145472k/9437184k available (7246k kernel code, 1057680k absent, 234032k reserved, 6044k data, 1360k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Experimental no-CBs for all CPUs
Experimental no-CBs CPUs: 0-255.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3058.964 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6117.92 BogoMIPS (lpj=12235856)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 30176 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz (fam: 06, model: 25, stepping: 02)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (24471.71 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf790140 01340 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 01340 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bf791480 004F4 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 004F4 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xfbdfc000-0xfbdfc3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfbdf8000-0xfbdfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xfbdf6000-0xfbdf63ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b08] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
pci 0000:00:1f.2: reg 24: [mem 0xfbdf4000-0xfbdf47ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xfbdff800-0xfbdff8ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfbee0000-0xfbefffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfbebc000-0xfbebffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 18: [mem 0xfafff000-0xfaffffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.6: PCI bridge to [bus 07]
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:07: [io 0x0a00-0x0a0f] has been reserved
system 00:07: [io 0x0a10-0x0a1f] has been reserved
system 00:07: [io 0x0a20-0x0a2f] has been reserved
system 00:07: [io 0x0a30-0x0a3f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
pci 0000:00:1c.6: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000
pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.6: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.7: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.6: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0400000-0xc05fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0800000-0xc09fffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0c00000-0xc0dfffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0e00000-0xc0ffffff 64bit pref]
pci 0000:00:1c.6: BAR 14: assigned [mem 0xc1000000-0xc11fffff]
pci 0000:00:1c.6: BAR 15: assigned [mem 0xc1200000-0xc13fffff 64bit pref]
pci 0000:00:1c.7: BAR 14: assigned [mem 0xc1400000-0xc15fffff]
pci 0000:00:1c.7: BAR 15: assigned [mem 0xc1600000-0xc17fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.6: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.7: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff]
pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xc0800000-0xc09fffff]
pci 0000:00:1c.3: bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.4: bridge window [mem 0xc0c00000-0xc0dfffff]
pci 0000:00:1c.4: bridge window [mem 0xc0e00000-0xc0ffffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 07]
pci 0000:00:1c.6: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.6: bridge window [mem 0xc1000000-0xc11fffff]
pci 0000:00:1c.6: bridge window [mem 0xc1200000-0xc13fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.7: bridge window [mem 0xc1400000-0xc15fffff]
pci 0000:00:1c.7: bridge window [mem 0xc1600000-0xc17fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 09]
pci 0000:00:1c.1: enabling device (0104 -> 0107)
pci 0000:00:1c.2: enabling device (0104 -> 0107)
pci 0000:00:1c.3: enabling device (0104 -> 0107)
pci 0000:00:1c.4: enabling device (0104 -> 0107)
pci 0000:00:1c.6: enabling device (0104 -> 0107)
pci 0000:00:1c.7: enabling device (0104 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xc0400000-0xc05fffff]
pci_bus 0000:04: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xc0800000-0xc09fffff]
pci_bus 0000:05: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xc0c00000-0xc0dfffff]
pci_bus 0000:06: resource 2 [mem 0xc0e00000-0xc0ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:07: resource 1 [mem 0xc1000000-0xc11fffff]
pci_bus 0000:07: resource 2 [mem 0xc1200000-0xc13fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xc1400000-0xc15fffff]
pci_bus 0000:08: resource 2 [mem 0xc1600000-0xc17fffff 64bit pref]
pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:09: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:09: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19416k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1377077018.500:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15947
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (13 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THRS] (32 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbdfc000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.7-031007-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbdf6000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.7-031007-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5116d96fb7fca548a4acc69ea377c7dc0ca5cbd3'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:02: setting system clock to 2013-08-21 09:23:39 UTC (1377077019)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1360k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 936k freed
Freeing unused kernel memory: 868k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
udevd[125]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 41 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc90000c64000, 90:fb:a6:89:b8:9c, XID 0c100000 IRQ 41
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
microcode: CPU0 sig=0x20652, pf=0x2, revision=0x9
microcode: CPU0 sig=0x20652, pf=0x2, revision=0x9
microcode: CPU0 updated to revision 0xd, date = 2011-09-01
microcode: CPU1 sig=0x20652, pf=0x2, revision=0x9
microcode: CPU1 sig=0x20652, pf=0x2, revision=0x9
microcode: CPU1 updated to revision 0xd, date = 2011-09-01
microcode: CPU2 sig=0x20652, pf=0x2, revision=0x9
microcode: CPU2 sig=0x20652, pf=0x2, revision=0x9
microcode: CPU2 updated to revision 0xd, date = 2011-09-01
microcode: CPU3 sig=0x20652, pf=0x2, revision=0x9
microcode: CPU3 sig=0x20652, pf=0x2, revision=0x9
microcode: CPU3 updated to revision 0xd, date = 2011-09-01
microcode: Microcode Update Driver: v2.00 , Peter Oruba
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x174B:0xE145).
[drm] register mmio base: 0xFBEE0000
[drm] register mmio size: 131072
ATOM BIOS: CEDAR
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 4084038 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:01:00.0: radeon_uvd: Can't load firmware "radeon/CYPRESS_uvd.bin"
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4380 irq 42
[drm] Loading CEDAR Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88022e5e3c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88022e5e3c0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 43 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 0
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133
ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.15 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-1.4: New USB device found, idVendor=050d, idProduct=0237
usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.4: Product: USB 2.0 Hub [MTT]
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 7 ports detected
usb 1-1.5: new low-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 3058.999 MHz
Switching to clocksource tsc
usb 1-1.5: New USB device found, idVendor=046d, idProduct=c05b
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: USB Optical Mouse
usb 1-1.5: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input3
hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.5/input0
usb 2-1.5: new high-speed USB device number 3 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-1.5: New USB device found, idVendor=058f, idProduct=6362
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: Mass Storage Device
usb 2-1.5: Manufacturer: Generic
usb 2-1.5: SerialNumber: 058F63626420
usb-storage 2-1.5:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-1.5:1.0
usbcore: registered new interface driver usb-storage
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access Generic- SM/xD Picture 1.02 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:3: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:1: [sdd] Attached SCSI removable disk
sd 6:0:0:2: [sde] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Attached SCSI removable disk
EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
EXT4-fs (sdb1): write access will be enabled during recovery
EXT4-fs (sdb1): orphan cleanup on readonly fs
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1570641
EXT4-fs (sdb1): 1 orphan inode deleted
EXT4-fs (sdb1): recovery complete
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead main process (404) terminated with status 5
Adding 8397820k swap on /dev/sdb5. Priority:-1 extents:1 across:8397820k SSFS
udevd[503]: starting version 175
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \LEDC 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
type=1400 audit(1377069822.209:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=651 comm="apparmor_parser"
type=1400 audit(1377069822.209:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=651 comm="apparmor_parser"
type=1400 audit(1377069822.209:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=651 comm="apparmor_parser"
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
SKU: Nid=0x1d sku_cfg=0x4014c601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000004
SKU: customization=0x000000c6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4014c601 for NID 0x1d
realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0662
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
init: avahi-cups-reload main process (1033) terminated with status 1
hda-intel 0000:01:00.1: Enable sync_write for stable communication
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
type=1400 audit(1377069822.509:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1093 comm="apparmor_parser"
type=1400 audit(1377069822.509:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1093 comm="apparmor_parser"
gpio_ich: GPIO from 180 to 255 on gpio_ich
init: failsafe main process (1213) killed by TERM signal
type=1400 audit(1377069822.785:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1350 comm="apparmor_parser"
type=1400 audit(1377069822.785:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1350 comm="apparmor_parser"
type=1400 audit(1377069822.785:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1350 comm="apparmor_parser"
type=1400 audit(1377069822.789:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1348 comm="apparmor_parser"
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x1ee offMax=0xf0e
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.16 (interface 0x001a0005).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (1791) terminated with status 1
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input10
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
microcode: CPU0 sig=0x20652, pf=0x2, revision=0xd
microcode: CPU0 updated to revision 0xe, date = 2013-06-26
microcode: CPU1 sig=0x20652, pf=0x2, revision=0xd
microcode: CPU1 updated to revision 0xe, date = 2013-06-26
microcode: CPU2 sig=0x20652, pf=0x2, revision=0xd
microcode: CPU2 updated to revision 0xe, date = 2013-06-26
microcode: CPU3 sig=0x20652, pf=0x2, revision=0xd
microcode: CPU3 updated to revision 0xe, date = 2013-06-26