dmesg - ION
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-27-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #40-Ubuntu SMP Tue Jul 9 00:17:05 UTC 2013 (Ubuntu 3.8.0-27.40-generic 3.8.13.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffc2e3f] usable
BIOS-e820: [mem 0x000000007ffc2e40-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000057fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Hewlett-Packard HP xw8400 Workstation/0A08h, BIOS 786D5 v02.38 10/25/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x580000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 100000000 mask F00000000 write-back
2 base 200000000 mask E00000000 write-back
3 base 400000000 mask F00000000 write-back
4 base 500000000 mask F80000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7ffc2 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fffc0-0x000fffcf] mapped at [ffff8800000fffc0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x7ffc1fff]
[mem 0x00000000-0x7fdfffff] page 2M
[mem 0x7fe00000-0x7ffc1fff] page 4k
kernel direct mapping tables up to 0x7ffc1fff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x57fffffff]
[mem 0x100000000-0x57fffffff] page 2M
kernel direct mapping tables up to 0x57fffffff @ [mem 0x7ffaf000-0x7ffc1fff]
RAMDISK: [mem 0x34298000-0x36143fff]
ACPI: RSDP 00000000000e9e10 00024 (v02 COMPAQ)
ACPI: XSDT 000000007ffc58ec 00064 (v01 HPQOEM SLIC-WKS 20101025 00000000)
ACPI: FACP 000000007ffc5a94 000F4 (v03 COMPAQ GREENCRK 00000001 00000000)
ACPI BIOS Bug: Error: 32/64X address mismatch in FADT/Gpe0Block: 0x0000F828/0x000000000001F030, using 32 (20121018/tbfadt-461)
ACPI: DSDT 000000007ffc5ee2 021A1 (v01 COMPAQ DSDT 00000001 MSFT 0100000E)
ACPI: FACS 000000007ffc5800 00040
ACPI: SSDT 000000007ffc8083 0735B (v01 COMPAQ PROJECT 00000001 MSFT 0100000E)
ACPI: APIC 000000007ffc5b88 000D4 (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: ASF! 000000007ffc5c5c 0006A (v32 COMPAQ GREENCRK 00000001 00000000)
ACPI: MCFG 000000007ffc5cc6 0003C (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: TCPA 000000007ffc5eb0 00032 (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: SLIC 000000007ffc5d02 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: HPET 000000007ffc5e78 00038 (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000057fffffff]
Initmem setup node 0 [mem 0x00000000-0x57fffffff]
NODE_DATA [mem 0x57fffb000-0x57fffffff]
[ffffea0000000000-ffffea0015ffffff] PMD -> [ffff88056b600000-ffff88057f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x57fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x7ffc1fff]
node 0: [mem 0x100000000-0x57fffffff]
On node 0 totalpages: 5242703
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 512002 pages, LIFO batch:31
Normal zone: 73728 pages used for memmap
Normal zone: 4644864 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec80000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 88
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
PM: Registered nosave memory: 000000007ffc2000 - 000000007ffc3000
PM: Registered nosave memory: 000000007ffc3000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88057fc00000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 5160777
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 20528876k/23068672k available (7012k kernel code, 2097860k absent, 441936k reserved, 6230k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:1560 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2659.908 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.81 BogoMIPS (lpj=10639632)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26709 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz (fam: 06, model: 0f, stepping: 07)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (42559.60 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xe0000000-0xe7ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000007ffd0e60 008C4 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 008C4 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20121018/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880562c64348), AE_ALREADY_EXISTS (20121018/psparse-537)
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20121018/nspredef-359)
pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci 0000:00:00.0: [8086:25c0] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:25fa] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:25e6] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0x4000-0x401f]
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0x4020-0x403f]
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 20: [io 0x4060-0x407f]
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xd3304000-0xd33043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
pci 0000:00:1f.1: reg 10: [io 0x40d0-0x40d7]
pci 0000:00:1f.1: reg 14: [io 0x40f0-0x40f3]
pci 0000:00:1f.1: reg 18: [io 0x40d8-0x40df]
pci 0000:00:1f.1: reg 1c: [io 0x40f4-0x40f7]
pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf]
pci 0000:00:1f.2: [8086:2682] type 00 class 0x010400
pci 0000:00:1f.2: reg 10: [io 0x40e0-0x40e7]
pci 0000:00:1f.2: reg 14: [io 0x40f8-0x40fb]
pci 0000:00:1f.2: reg 18: [io 0x40e8-0x40ef]
pci 0000:00:1f.2: reg 1c: [io 0x40fc-0x40ff]
pci 0000:00:1f.2: reg 20: [io 0x4080-0x409f]
pci 0000:00:1f.2: reg 24: [mem 0xd3304400-0xd33047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:10:00.0: [8086:3500] type 01 class 0x060400
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.3: [8086:350c] type 01 class 0x060400
pci 0000:10:00.3: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 10-20]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xd3c00000-0xd3ffffff]
pci 0000:1e:00.0: [8086:3510] type 01 class 0x060400
pci 0000:1e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:1e:01.0: [8086:3514] type 01 class 0x060400
pci 0000:1e:01.0: PME# supported from D0 D3hot D3cold
pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:10:00.0: PCI bridge to [bus 1e-20]
pci 0000:10:00.0: bridge window [mem 0xd3c00000-0xd3cfffff]
pci 0000:1e:00.0: PCI bridge to [bus 20]
pci 0000:1f:00.0: [14e4:1600] type 00 class 0x020000
pci 0000:1f:00.0: reg 10: [mem 0xd3c00000-0xd3c0ffff 64bit]
pci 0000:1f:00.0: PME# supported from D3hot D3cold
pci 0000:1f:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:1e:01.0: PCI bridge to [bus 1f]
pci 0000:1e:01.0: bridge window [mem 0xd3c00000-0xd3cfffff]
pci 0000:11:06.0: [1000:0050] type 00 class 0x010000
pci 0000:11:06.0: reg 10: [io 0x2000-0x20ff]
pci 0000:11:06.0: reg 14: [mem 0xd3e90000-0xd3e93fff 64bit]
pci 0000:11:06.0: reg 1c: [mem 0xd3e80000-0xd3e8ffff 64bit]
pci 0000:11:06.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:11:06.0: supports D1 D2
pci 0000:11:09.0: [103c:3220] type 00 class 0x010400
pci 0000:11:09.0: reg 10: [mem 0xd3e94000-0xd3e95fff 64bit]
pci 0000:11:09.0: reg 18: [io 0x2400-0x24ff]
pci 0000:11:09.0: reg 1c: [mem 0xd3e00000-0xd3e3ffff 64bit]
pci 0000:11:09.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:11:09.0: supports D1
pci 0000:11:0a.0: [0e11:b060] type 00 class 0x010400
pci 0000:11:0a.0: reg 10: [mem 0xd3e40000-0xd3e7ffff]
pci 0000:11:0a.0: reg 14: [mem 0xd3d00000-0xd3dfffff]
pci 0000:11:0a.0: reg 20: [io 0x2800-0x28ff]
pci 0000:11:0a.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:11:0a.0: supports D1
pci 0000:10:00.3: PCI bridge to [bus 11]
pci 0000:10:00.3: bridge window [io 0x2000-0x2fff]
pci 0000:10:00.3: bridge window [mem 0xd3d00000-0xd3efffff]
pci 0000:60:00.0: [1131:7164] type 00 class 0x048000
pci 0000:60:00.0: reg 10: [mem 0xd3400000-0xd37fffff 64bit]
pci 0000:60:00.0: reg 18: [mem 0xd3800000-0xd3bfffff 64bit]
pci 0000:60:00.0: supports D1 D2
pci 0000:60:00.0: PME# supported from D0 D1 D2
pci 0000:00:03.0: PCI bridge to [bus 60]
pci 0000:00:03.0: bridge window [mem 0xd3400000-0xd3bfffff]
pci 0000:40:00.0: [10de:0a64] type 00 class 0x030000
pci 0000:40:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:40:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:40:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:40:00.0: reg 24: [io 0x1000-0x107f]
pci 0000:40:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:40:00.1: [10de:0be3] type 00 class 0x040300
pci 0000:40:00.1: reg 10: [mem 0xd3000000-0xd3003fff]
pci 0000:00:04.0: PCI bridge to [bus 40]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:04.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus fe]
pci 0000:00:06.0: PCI bridge to [bus fd]
pci 0000:00:07.0: PCI bridge to [bus fc]
pci 0000:08:00.0: [8086:032c] type 01 class 0x060400
pci 0000:08:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 08-09]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd31fffff]
pci 0000:09:04.0: [103c:3220] type 00 class 0x010400
pci 0000:09:04.0: reg 10: [mem 0xd3140000-0xd3141fff 64bit]
pci 0000:09:04.0: reg 18: [io 0x3000-0x30ff]
pci 0000:09:04.0: reg 1c: [mem 0xd3100000-0xd313ffff 64bit]
pci 0000:09:04.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:09:04.0: supports D1
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:08:00.0: bridge window [mem 0xd3100000-0xd31fffff]
pci 0000:01:05.0: [104c:8023] type 00 class 0x0c0010
pci 0000:01:05.0: reg 10: [mem 0xd3204000-0xd32047ff]
pci 0000:01:05.0: reg 14: [mem 0xd3200000-0xd3203fff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd3200000-0xd32fffff]
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH2.MUPP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH2.MUPP.PTE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH2.MUPP.PTE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH2.PCIX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1.PXA_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20121018/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880562c64348), AE_ALREADY_EXISTS (20121018/psparse-537)
ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20121018/nspredef-359)
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
vgaarb: device added: PCI:0000:40:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:40:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ffc2e40-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [dma 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:0a: [dma 2]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:0d: [io 0x04d0-0x04d1] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0e: [io 0x0400-0x041f] has been reserved
system 00:0e: [io 0x0420-0x043f] has been reserved
system 00:0e: [io 0x0440-0x045f] has been reserved
system 00:0e: [io 0x0460-0x047f] has been reserved
system 00:0e: [io 0x0480-0x048f] has been reserved
system 00:0e: [io 0x0490-0x049f] has been reserved
system 00:0e: [io 0xf800-0xf81f] has been reserved
system 00:0e: [io 0xf820-0xf83f] has been reserved
system 00:0e: [io 0xf840-0xf85f] has been reserved
system 00:0e: [io 0xf860-0xf87f] has been reserved
system 00:0e: [io 0xfa00-0xfa3f] has been reserved
system 00:0e: [io 0xfc00-0xfc7f] has been reserved
system 00:0e: [io 0xfc80-0xfcff] has been reserved
system 00:0e: [io 0xfe00-0xfe7f] has been reserved
system 00:0e: [io 0xfe80-0xfeff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0f: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0f: [mem 0xffe00000-0xffffffff] has been reserved
system 00:0f: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0f: [mem 0xfe700000-0xfe7003ff] has been reserved
system 00:0f: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:0f: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:10: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:10: disabling [mem 0x000c0000-0x000e7fff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:10: disabling [mem 0x000e8000-0x000effff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:10: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:10: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:11:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:10: disabling [mem 0x000c0000-0x000e7fff disabled] because it overlaps 0000:11:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:10: disabling [mem 0x000e8000-0x000effff disabled] because it overlaps 0000:11:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:10: disabling [mem 0x000f0000-0x000fffff disabled] because it overlaps 0000:11:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref]
system 00:10: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:10: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:11: [mem 0xe0000000-0xefffffff] has been reserved
system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 18 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 08-09] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:02.0: BAR 15: assigned [mem 0x80000000-0x802fffff pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80300000-0x805fffff pref]
pci 0000:10:00.3: BAR 15: assigned [mem 0x80000000-0x802fffff pref]
pci 0000:1e:00.0: PCI bridge to [bus 20]
pci 0000:1e:01.0: PCI bridge to [bus 1f]
pci 0000:1e:01.0: bridge window [mem 0xd3c00000-0xd3cfffff]
pci 0000:10:00.0: PCI bridge to [bus 1e-20]
pci 0000:10:00.0: bridge window [mem 0xd3c00000-0xd3cfffff]
pci 0000:11:06.0: BAR 6: assigned [mem 0x80000000-0x800fffff pref]
pci 0000:11:0a.0: BAR 6: assigned [mem 0x80100000-0x801fffff pref]
pci 0000:11:09.0: BAR 6: assigned [mem 0x80200000-0x8023ffff pref]
pci 0000:10:00.3: PCI bridge to [bus 11]
pci 0000:10:00.3: bridge window [io 0x2000-0x2fff]
pci 0000:10:00.3: bridge window [mem 0xd3d00000-0xd3efffff]
pci 0000:10:00.3: bridge window [mem 0x80000000-0x802fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 10-20]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xd3c00000-0xd3ffffff]
pci 0000:00:02.0: bridge window [mem 0x80000000-0x802fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 60]
pci 0000:00:03.0: bridge window [mem 0xd3400000-0xd3bfffff]
pci 0000:40:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
pci 0000:00:04.0: PCI bridge to [bus 40]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:04.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus fe]
pci 0000:00:06.0: PCI bridge to [bus fd]
pci 0000:00:07.0: PCI bridge to [bus fc]
pci 0000:08:00.0: BAR 15: assigned [mem 0x80300000-0x803fffff pref]
pci 0000:09:04.0: BAR 6: assigned [mem 0x80300000-0x8033ffff pref]
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:08:00.0: bridge window [mem 0xd3100000-0xd31fffff]
pci 0000:08:00.0: bridge window [mem 0x80300000-0x803fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 08-09]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd31fffff]
pci 0000:00:1c.0: bridge window [mem 0x80300000-0x805fffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1e.0: bridge window [mem 0xd3200000-0xd32fffff]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: resource 6 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:00: resource 7 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 10 [io 0x0d00-0xffff]
pci_bus 0000:10: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:10: resource 1 [mem 0xd3c00000-0xd3ffffff]
pci_bus 0000:10: resource 2 [mem 0x80000000-0x802fffff pref]
pci_bus 0000:1e: resource 1 [mem 0xd3c00000-0xd3cfffff]
pci_bus 0000:1f: resource 1 [mem 0xd3c00000-0xd3cfffff]
pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:11: resource 1 [mem 0xd3d00000-0xd3efffff]
pci_bus 0000:11: resource 2 [mem 0x80000000-0x802fffff pref]
pci_bus 0000:60: resource 1 [mem 0xd3400000-0xd3bfffff]
pci_bus 0000:40: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:40: resource 1 [mem 0xd2000000-0xd30fffff]
pci_bus 0000:40: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xd3100000-0xd31fffff]
pci_bus 0000:08: resource 2 [mem 0x80300000-0x805fffff pref]
pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:09: resource 1 [mem 0xd3100000-0xd31fffff]
pci_bus 0000:09: resource 2 [mem 0x80300000-0x803fffff pref]
pci_bus 0000:01: resource 1 [mem 0xd3200000-0xd32fffff]
pci_bus 0000:01: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 5 [mem 0x80000000-0xdfffffff]
pci_bus 0000:01: resource 6 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 7 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:01: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 9 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 10 [io 0x0d00-0xffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:40:00.0: Boot video device
pci 0000:08:00.0: rerouting interrupts for [8086:032c]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31408k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7bfaf000-0x7ffaf000] (64MB) mapped at [ffff88007bfaf000-ffff88007ffaefff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1376856026.136:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 88 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
ata2: port disabled--ignoring
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 16, io mem 0xd3304000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00004060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-27-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b19078b01b96b975438ce0719f8a7eb15318eb67'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-08-18 20:00:27 UTC (1376856027)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1168k freed
Freeing unused kernel memory: 1080k freed
udevd[136]: starting version 175
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
Disabling lock debugging due to kernel taint
PTP clock support registered
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
HP CISS Driver (v 3.6.26)
Fusion MPT SAS Host driver 3.04.20
tg3.c:v3.128 (December 03, 2012)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xd3304400 port 0xd3304500 irq 19
ata4: SATA max UDMA/133 abar m1024@0xd3304400 port 0xd3304580 irq 19
ata5: SATA max UDMA/133 abar m1024@0xd3304400 port 0xd3304600 irq 19
ata6: SATA max UDMA/133 abar m1024@0xd3304400 port 0xd3304680 irq 19
ata7: SATA max UDMA/133 abar m1024@0xd3304400 port 0xd3304700 irq 19
ata8: SATA max UDMA/133 abar m1024@0xd3304400 port 0xd3304780 irq 19
tg3 0000:1f:00.0 eth0: Tigon3 [partno(BCM95752) rev 6001] (PCI Express) MAC address 00:1c:c4:ae:03:0c
tg3 0000:1f:00.0 eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:1f:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:1f:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
FDC 0 is a post-1991 82077
firewire_ohci 0000:01:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
cciss 0000:11:09.0: cciss0: at PCI 0000:11:09.0 IRQ 52 using DAC
cciss 0000:11:09.0: blocks= 15627854000 block_size= 512
cciss 0000:11:09.0: blocks= 15627854000 block_size= 512
cciss/c0d0: p1
scsi8 : cciss
mptbase: ioc0: Initiating bringup
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8.00: ATAPI: HL-DT-ST BD-RE WH14NS40, 1.00, max UDMA/100
ata8.00: configured for UDMA/100
scsi 7:0:0:0: CD-ROM HL-DT-ST BD-RE WH14NS40 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 7:0:0:0: Attached scsi CD-ROM sr0
sr 7:0:0:0: Attached scsi generic sg0 type 5
usb 2-1: new full-speed USB device number 2 using uhci_hcd
firewire_core 0000:01:05.0: created device fw0: GUID 0060b0000024f051, S400
usb 2-1: New USB device found, idVendor=0451, idProduct=2046
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 2659.999 MHz
Switching to clocksource tsc
ioc0: LSISAS1064 A4: Capabilities={Initiator}
usb 2-1.2: new low-speed USB device number 3 using uhci_hcd
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c016
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Optical USB Mouse
usb 2-1.2: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1.2/input0
usb 2-1.4: new low-speed USB device number 4 using uhci_hcd
usb 2-1.4: New USB device found, idVendor=047b, idProduct=0011
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: Standard USB Keyboard
usb 2-1.4: Manufacturer: Silitek
input: Silitek Standard USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input3
hid-generic 0003:047B:0011.0002: input,hidraw1: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:1d.0-1.4/input0
scsi9 : ioc0: LSISAS1064 A4, FwRev=01100000h, Ports=1, MaxQ=511, IRQ=62
cciss 0000:11:0a.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date.
cciss 0000:11:0a.0: cciss1: at PCI 0000:11:0a.0 IRQ 56 using DAC
cciss/c1d0: p1
cciss/c1d0: p1 size 4255184682 extends beyond EOD, truncated
cciss/c1d1: unknown partition table
scsi10 : cciss
cciss 0000:09:04.0: PCI IRQ 24 -> rerouted to legacy IRQ 16
cciss 0000:09:04.0: cciss2: at PCI 0000:09:04.0 IRQ 16 using DAC
cciss/c2d0: p1 p2 p3
scsi11 : cciss
md: bind
md: bind
md: raid0 personality registered for level 0
md/raid0:md0: md_size is 4255186688 sectors.
md: RAID0 configuration for md0 - 1 zone
md: zone0=[cciss/c1d0/cciss/c1d1]
zone-offset= 0KB, device-offset= 0KB, size=2127593344KB
md0: detected capacity change from 0 to 2178655584256
md0: p1
xor: automatically using best checksumming function:
generic_sse: 9304.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid1 personality registered for level 1
raid6: sse2x1 3669 MB/s
raid6: sse2x2 7230 MB/s
raid6: sse2x4 8166 MB/s
raid6: using algorithm sse2x4 (8166 MB/s)
raid6: using ssse3x2 recovery algorithm
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
Btrfs loaded
EXT4-fs (cciss!c2d0p2): INFO: recovery required on readonly filesystem
EXT4-fs (cciss!c2d0p2): write access will be enabled during recovery
EXT4-fs (cciss!c2d0p2): recovery complete
EXT4-fs (cciss!c2d0p2): mounted filesystem with ordered data mode. Opts: (null)
Adding 4520956k swap on /dev/cciss/c2d0p3. Priority:-1 extents:1 across:4520956k
EXT4-fs (cciss!c2d0p2): re-mounted. Opts: errors=remount-ro
EXT4-fs (cciss!c2d0p1): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[680]: starting version 175
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp: driver loaded but no devices found
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
Linux video capture interface: v2.00
nvidia: module license 'NVIDIA' taints kernel.
saa7164 driver loaded
CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
saa7164[0]/0: found at 0000:60:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xd3400000
ACPI Warning: 0x000000000000f828-0x000000000000f82f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
wmi: Mapper loaded
vgaarb: device changed decodes: PCI:0000:40:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
hda_intel: Disabling MSI
hda-intel 0000:40:00.1: Handle VGA-switcheroo audio client
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
microcode: CPU0 sig=0x6f7, pf=0x40, revision=0x6b
device-mapper: multipath: version 1.5.1 loaded
saa7164_downloadfirmware() no first image
saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
lp0: using parport0 (interrupt-driven).
gpio_ich: ACPI BAR is unavailable, GPI 0 - 15 unavailable
gpio_ich: GPIO from 206 to 255 on gpio_ich
ppdev: user-space parallel port driver
microcode: CPU1 sig=0x6f7, pf=0x40, revision=0x6b
microcode: CPU2 sig=0x6f7, pf=0x40, revision=0x6b
microcode: CPU3 sig=0x6f7, pf=0x40, revision=0x6b
microcode: CPU4 sig=0x6f7, pf=0x40, revision=0x6b
microcode: CPU5 sig=0x6f7, pf=0x40, revision=0x6b
microcode: CPU6 sig=0x6f7, pf=0x40, revision=0x6b
microcode: CPU7 sig=0x6f7, pf=0x40, revision=0x6b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: disabled by bios
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
input: HP WMI hotkeys as /devices/virtual/input/input4
saa7164_downloadfirmware() firmware read 4019072 bytes.
saa7164_downloadfirmware() firmware loaded.
Firmware file header part 1:
.FirmwareSize = 0x0
.BSLSize = 0x0
.Reserved = 0x3d538
.Version = 0x3
saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
saa7164_downloadfirmware() FirmwareSize = 0x1fd6
saa7164_downloadfirmware() BSLSize = 0x0
saa7164_downloadfirmware() Reserved = 0x0
saa7164_downloadfirmware() Version = 0x1661c00
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:04.0/0000:40:00.1/sound/card0/input5
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:04.0/0000:40:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:04.0/0000:40:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:04.0/0000:40:00.1/sound/card0/input8
saa7164_downloadimage() Image downloaded, booting...
saa7164_downloadimage() Image booted successfully.
starting firmware download(2)
saa7164_downloadimage() Image downloaded, booting...
saa7164_downloadimage() Image booted successfully.
firmware download complete.
tveeprom 0-0000: Hauppauge model 88061, rev C4F2, serial# 8538097
tveeprom 0-0000: MAC address is 00:0d:fe:82:47:f1
tveeprom 0-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
tveeprom 0-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
tveeprom 0-0000: audio processor is SAA7164 (idx 43)
tveeprom 0-0000: decoder processor is SAA7164 (idx 40)
tveeprom 0-0000: has radio, has IR receiver, has no IR transmitter
saa7164[0]: Hauppauge eeprom: model=88061
tda18271 1-0060: creating new instance
TDA18271HD/C2 detected @ 1-0060
DVB: registering new adapter (saa7164)
saa7164 0000:60:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
tda18271 2-0060: creating new instance
TDA18271HD/C2 detected @ 2-0060
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete
DVB: registering new adapter (saa7164)
saa7164 0000:60:00.0: DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
saa7164[0]: registered device video0 [mpeg]
saa7164[0]: registered device video1 [mpeg]
saa7164[0]: registered device vbi0 [vbi]
saa7164[0]: registered device vbi1 [vbi]
init: udev-fallback-graphics main process (1140) terminated with status 1
JFS: nTxBlock = 8192, nTxLock = 65536
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: failsafe main process (1187) killed by TERM signal
init: idmapd main process (1261) terminated with status 1
init: idmapd main process ended, respawning
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (1379) terminated with status 1
tg3 0000:1f:00.0: irq 89 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81cbb100)
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x840 offMax=0xf430
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.12 (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
tg3 0000:1f:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:1f:00.0 eth0: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
init: plymouth-stop pre-start process (2858) terminated with status 1
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete
nemo[3816]: segfault at 0 ip 00007f29646fb453 sp 00007fffbfe0d9a8 error 6 in libgio-2.0.so.0.3600.0[7f296462b000+153000]