dmesg - pre-tuned
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-358.11.1.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed May 15 10:48:38 EDT 2013
Command line: ro root=/dev/mapper/vg0-Root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=no rd_LVM_LV=vg0/Swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_DM rd_LVM_LV=vg0/Root quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000df61f000 (usable)
BIOS-e820: 00000000df61f000 - 00000000df62c000 (ACPI data)
BIOS-e820: 00000000df62c000 - 00000000df62d000 (usable)
BIOS-e820: 00000000df62d000 - 00000000e4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000121ffff000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF4F40
DMI: HP ProLiant DL380 G6, BIOS P62 05/05/2011
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x121ffff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdf62d max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000df62d000
0000000000 - 00df600000 page 2M
00df600000 - 00df62d000 page 4k
kernel direct mapping tables up to df62d000 @ 8000-e000
init_memory_mapping: 0000000100000000-000000121ffff000
0100000000 - 121fe00000 page 2M
121fe00000 - 121ffff000 page 4k
kernel direct mapping tables up to 121ffff000 @ c000-53000
RAMDISK: 37085000 - 37fefc29
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000df620340 000B4 (v01 HP ProLiant 00000002 �? 0000162E)
ACPI: FACP 00000000df620440 000F4 (v03 HP ProLiant 00000002 �? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20090903/tbfadt-607)
ACPI: DSDT 00000000df620540 0200D (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000df61f100 00040
ACPI: SPCR 00000000df61f140 00050 (v01 HP SPCRRBSU 00000001 �? 0000162E)
ACPI: MCFG 00000000df61f1c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000df61f200 00038 (v01 HP ProLiant 00000002 �? 0000162E)
ACPI: FFFF 00000000df61f240 00064 (v02 HP ProLiant 00000002 �? 0000162E)
ACPI: SPMI 00000000df61f2c0 00040 (v05 HP ProLiant 00000001 �? 0000162E)
ACPI: ERST 00000000df61f300 001D0 (v01 HP ProLiant 00000001 �? 0000162E)
ACPI: APIC 00000000df61f500 0015E (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 00000000df61f680 00570 (v01 HP Proliant 00000001 �? 0000162E)
ACPI: FFFF 00000000df61fc00 00176 (v01 HP ProLiant 00000001 �? 0000162E)
ACPI: BERT 00000000df61fd80 00030 (v01 HP ProLiant 00000001 �? 0000162E)
ACPI: HEST 00000000df61fdc0 000BC (v01 HP ProLiant 00000001 �? 0000162E)
ACPI: DMAR 00000000df61fe80 00154 (v01 HP ProLiant 00000001 �? 0000162E)
ACPI: SSDT 00000000df622580 00125 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000df6226c0 00255 (v03 HP riser1a 00000002 INTL 20061109)
ACPI: SSDT 00000000df622940 003BB (v01 HP pcc 00000001 INTL 20090625)
ACPI: SSDT 00000000df622d00 00377 (v01 HP pmab 00000001 INTL 20090625)
ACPI: SSDT 00000000df623080 015C4 (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 1 -> APIC 16 -> Node 1
SRAT: PXM 1 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 22 -> Node 1
SRAT: Node 0 PXM 0 0-e0000000
SRAT: Node 0 PXM 0 100000000-920000000
SRAT: Node 1 PXM 1 920000000-1220000000
NUMA: Allocated memnodemap from 52000 - 52140
NUMA: Using 29 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000920000000
NODE_DATA [0000000000052140 - 000000000008613f]
bootmap [0000000000100000 - 0000000000223fff] pages 124
(9 early reservations) ==> bootmem [0000000000 - 0920000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201b0a4] TEXT DATA BSS ==> [0001000000 - 000201b0a4]
#3 [0037085000 - 0037fefc29] RAMDISK ==> [0037085000 - 0037fefc29]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [000201c000 - 000201c188] BRK ==> [000201c000 - 000201c188]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000052000] PGTABLE ==> [000000c000 - 0000052000]
#8 [0000052000 - 0000052140] MEMNODEMAP ==> [0000052000 - 0000052140]
Bootmem setup node 1 0000000920000000-000000121ffff000
NODE_DATA [0000000920000040 - 000000092003403f]
bootmap [0000000920035000 - 0000000920154fff] pages 120
(9 early reservations) ==> bootmem [0920000000 - 121ffff000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000201b0a4] TEXT DATA BSS
#3 [0037085000 - 0037fefc29] RAMDISK
#4 [000009f400 - 0000100000] BIOS reserved
#5 [000201c000 - 000201c188] BRK
#6 [0000008000 - 000000c000] PGTABLE
#7 [000000c000 - 0000052000] PGTABLE
#8 [0000052000 - 0000052140] MEMNODEMAP
found SMP MP-table at [ffff8800000f4f80] f4f80
Reserving 133MB of memory at 48MB for crashkernel (System RAM: 74239MB)
[ffffea0000000000-ffffea000effffff] PMD -> [ffff880028600000-ffff880036ffffff] on node 0
[ffffea001ff00000-ffffea001fffffff] potential offnode page_structs
[ffffea000f000000-ffffea001fffffff] PMD -> [ffff880038000000-ffff880048ffffff] on node 0
[ffffea0020000000-ffffea003f7fffff] PMD -> [ffff880920200000-ffff88093f9fffff] on node 1
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0121ffff
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000df61f
0: 0x000df62c -> 0x000df62d
0: 0x00100000 -> 0x00920000
1: 0x00920000 -> 0x0121ffff
On node 0 totalpages: 9434558
DMA zone: 56 pages used for memmap
DMA zone: 173 pages reserved
DMA zone: 3769 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 896600 pages, LIFO batch:31
Normal zone: 116480 pages used for memmap
Normal zone: 8403200 pages, LIFO batch:31
On node 1 totalpages: 9437183
Normal zone: 129024 pages used for memmap
Normal zone: 9308159 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 32 CPUs, 24 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000df61f000 - 00000000df62c000
PM: Registered nosave memory: 00000000df62d000 - 00000000e4000000
PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u131072
pcpu-alloc: s94552 r8192 d24232 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 18611728
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg0-Root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=no rd_LVM_LV=vg0/Swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=133M@0M rd_NO_DM rd_LVM_LV=vg0/Root quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 74213048k/76021756k available (5221k kernel code, 534792k absent, 1273916k reserved, 7120k data, 1264k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1072
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 301989888 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2400.325 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.65 BogoMIPS (lpj=2400325)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21433 entries in 85 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000e7ffe000 flags: 0x1
dmar: IOMMU 0: reg_base_addr e7ffe000 ver 1:0 cap c90780106f0462 ecap f0207e
dmar: RMRR base: 0x000000df7fc000 end: 0x000000df7fdfff
dmar: RMRR base: 0x000000df7f5000 end: 0x000000df7fafff
dmar: RMRR base: 0x000000df63e000 end: 0x000000df63ffff
dmar: ATSR flags: 0x0
IOAPIC id 8 under DRHD base 0xe7ffe000
IOAPIC id 0 under DRHD base 0xe7ffe000
Enabled IRQ remapping in xapic mode
Setting APIC routing to physical flat
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz stepping 05
Performance Events: PEBS fmt1+, Nehalem events, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
CPU erratum AAJ80 worked around
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 1, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 1, Processors #3 Ok.
Booting Node 0, Processors #4 Ok.
Booting Node 1, Processors #5 Ok.
Booting Node 0, Processors #6 Ok.
Booting Node 1, Processors #7
Brought up 8 CPUs
Total of 8 processors activated (38399.89 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e3ffffff
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL380 detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-19])
pci_root PNP0A08:00: host bridge window [mem 0xe7000000-0xfbffffff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0x4fff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed03fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed44fff]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed44fff] ignored
[Hardware Error]: This system BIOS has enabled interrupt remapping
on a chipset that contains an errata making that
feature unstable. Please reboot with nointremap
added to the kernel command line and contact
your BIOS vendor for an update
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1000-0x101f]
pci 0000:00:1d.1: reg 20: [io 0x1020-0x103f]
pci 0000:00:1d.2: reg 20: [io 0x1040-0x105f]
pci 0000:00:1d.3: reg 20: [io 0x1060-0x107f]
pci 0000:00:1d.7: reg 10: [mem 0xf1df0000-0xf1df03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:04:00.0: reg 10: [mem 0xfbe00000-0xfbffffff 64bit]
pci 0000:04:00.0: reg 18: [mem 0xfbdf0000-0xfbdf0fff 64bit]
pci 0000:04:00.0: reg 20: [io 0x4000-0x40ff]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:04:00.0: PME# supported from D0
pci 0000:04:00.0: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 04-04]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:02.0: PCI bridge to [bus 05-05]
pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 10-12]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:04.0: PCI bridge to [bus 13-13]
pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:05.0: PCI bridge to [bus 14-16]
pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:06.0: PCI bridge to [bus 17-19]
pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:07.0: PCI bridge to [bus 0d-0f]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:08.0: PCI bridge to [bus 0a-0c]
pci 0000:00:08.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:09.0: PCI bridge to [bus 07-09]
pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0a.0: PCI bridge to [bus 06-06]
pci 0000:00:0a.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10: [mem 0xf2000000-0xf3ffffff 64bit]
pci 0000:02:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf5ffffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10: [mem 0xf6000000-0xf7ffffff 64bit]
pci 0000:03:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:03.0: reg 10: [mem 0xe8000000-0xefffffff pref]
pci 0000:01:03.0: reg 14: [io 0x3000-0x30ff]
pci 0000:01:03.0: reg 18: [mem 0xf1ff0000-0xf1ffffff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff]
pci 0000:01:04.0: reg 14: [mem 0xf1fe0000-0xf1fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff]
pci 0000:01:04.2: reg 14: [mem 0xf1fd0000-0xf1fd07ff]
pci 0000:01:04.2: reg 18: [mem 0xf1fc0000-0xf1fc3fff]
pci 0000:01:04.2: reg 1c: [mem 0xf1f00000-0xf1f7ffff]
pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20: [io 0x3800-0x381f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10: [mem 0xf1ef0000-0xf1ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf1e00000-0xf1ffffff]
pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:00:1e.0: bridge window [mem 0xe7000000-0xfbffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x4fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT08._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT09._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT0A._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0077]
pnp 00:01: [io 0x0408-0x040f]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0020-0x003f]
pnp 00:01: [io 0x00a0-0x00bf]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0700-0x071f]
pnp 00:01: [io 0x0880-0x08ff]
pnp 00:01: [io 0x0900-0x097f]
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0c80-0x0c83]
pnp 00:01: [io 0x0cd4-0x0cd7]
pnp 00:01: [io 0x0f50-0x0f58]
pnp 00:01: [io 0x00f0]
pnp 00:01: [io 0x0ca0-0x0ca1]
pnp 00:01: [io 0x0ca4-0x0ca5]
pnp 00:01: [mem 0xe0000000-0xe3ffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xe7ffe000-0xe7ffffff]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [io 0x02f8-0x02ff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0ca2-0x0ca3]
pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [dma 7]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:08: [io 0x002e-0x002f]
pnp 00:08: [io 0x0620-0x065f]
pnp 00:08: [io 0x0680-0x069f]
pnp 00:08: [io 0x0600-0x061f]
pnp 00:08: [io 0x0660-0x067f]
pnp 00:08: [io 0x0300-0x031f]
pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:09: [irq 4]
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:0a: [io 0x0070-0x0071]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0700-0x071f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xe7ffe000-0xe7ffffff] could not be reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: BAR 15: assigned [mem 0xe7000000-0xe70fffff pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xe7100000-0xe71fffff pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xe7200000-0xe72fffff pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xe7000000-0xe707ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 04-04]
pci 0000:00:01.0: PCI bridge to [bus 04-04]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xe7000000-0xe70fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 05-05]
pci 0000:00:02.0: PCI bridge to [bus 05-05]
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [mem disabled]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 10-12]
pci 0000:00:03.0: PCI bridge to [bus 10-12]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 13-13]
pci 0000:00:04.0: PCI bridge to [bus 13-13]
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem disabled]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 14-16]
pci 0000:00:05.0: PCI bridge to [bus 14-16]
pci 0000:00:05.0: bridge window [io disabled]
pci 0000:00:05.0: bridge window [mem disabled]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 17-19]
pci 0000:00:06.0: PCI bridge to [bus 17-19]
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem disabled]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 0d-0f]
pci 0000:00:07.0: PCI bridge to [bus 0d-0f]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:08.0: PCI bridge to [bus 0a-0c]
pci 0000:00:08.0: PCI bridge to [bus 0a-0c]
pci 0000:00:08.0: bridge window [io disabled]
pci 0000:00:08.0: bridge window [mem disabled]
pci 0000:00:08.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 07-09]
pci 0000:00:09.0: PCI bridge to [bus 07-09]
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem disabled]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0a.0: PCI bridge to [bus 06-06]
pci 0000:00:0a.0: PCI bridge to [bus 06-06]
pci 0000:00:0a.0: bridge window [io disabled]
pci 0000:00:0a.0: bridge window [mem disabled]
pci 0000:00:0a.0: bridge window [mem pref disabled]
pci 0000:02:00.0: BAR 6: assigned [mem 0xe7100000-0xe710ffff pref]
pci 0000:02:00.1: BAR 6: assigned [mem 0xe7110000-0xe711ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf5ffffff]
pci 0000:00:1c.0: bridge window [mem 0xe7100000-0xe71fffff pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xe7200000-0xe720ffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0xe7210000-0xe721ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [io disabled]
pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xe7200000-0xe72fffff pref]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf1e00000-0xf1e1ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf1e20000-0xf1e2ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf1e00000-0xf1ffffff]
pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:08.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0xe7000000-0xfbffffff]
pci_bus 0000:00: resource 5 [io 0x1000-0x4fff]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff]
pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 11 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbffffff]
pci_bus 0000:04: resource 2 [mem 0xe7000000-0xe70fffff pref]
pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf5ffffff]
pci_bus 0000:02: resource 2 [mem 0xe7100000-0xe71fffff pref]
pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:03: resource 2 [mem 0xe7200000-0xe72fffff pref]
pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf1e00000-0xf1ffffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff 64bit pref]
pci_bus 0000:01: resource 4 [mem 0xe7000000-0xfbffffff]
pci_bus 0000:01: resource 5 [io 0x1000-0x4fff]
pci_bus 0000:01: resource 6 [io 0x0000-0x03af]
pci_bus 0000:01: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:01: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed44fff]
pci_bus 0000:01: resource 10 [io 0x03b0-0x03bb]
pci_bus 0000:01: resource 11 [io 0x03c0-0x03df]
pci_bus 0000:01: resource 12 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.1: PCI INT B disabled
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:03.0: Boot video device
pci 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
pci 0000:01:04.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15787k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1374173669.525:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 312C8769738C2C5A
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 49 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.2: irq 50 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: Adding SMBIOS-specified kcs state machine: duplicate interface
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ipmi_si: Adding PCI-specified kcs state machine
ipmi_si: Adding ACPI-specified kcs state machine: duplicate interface
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf1ef0000, slave address 0x0, irq 21
IRQ 21/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 21
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x11)
IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
[Firmware Bug]: APEI: Invalid bit width + offset in GAR [0xe8028/64/0/2/0]
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf1df0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.11.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-358.11.1.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-358.11.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-358.11.1.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-358.11.1.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-358.11.1.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:01:04.4
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:0a: setting system clock to 2013-07-18 18:54:31 UTC (1374173671)
Initalizing network drop monitor service
Freeing unused kernel memory: 1264k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 904k freed
Freeing unused kernel memory: 1676k freed
dracut: dracut-004-303.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: [email protected]
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB).
[drm] register mmio base: 0xF1FF0000
[drm] register mmio size: 65536
radeon 0000:01:03.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M used)
radeon 0000:01:03.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 37116340 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 64M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000037880000).
radeon 0000:01:03.0: WB disabled
radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0xffff880037817000
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x00000000C8001000
[drm] ring test succeeded in 1 usecs
usb 6-1: new full speed USB device number 2 using uhci_hcd
Refined TSC clocksource calibration: 2400.084 MHz.
Switching to clocksource tsc
usb 6-1: New USB device found, idVendor=03f0, idProduct=1027
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Virtual Keyboard
usb 6-1: Manufacturer: HP
usb 6-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input2
generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input3
generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] VGA-2
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] fb mappable at 0xE8040000
[drm] vram apper at 0xE8000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.22.0 20080528 for 0000:01:03.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
HP HPSA Driver (v 3.2.0-RH1)
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:04:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
hpsa 0000:04:00.0: setting latency timer to 64
hpsa 0000:04:00.0: MSIX
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:04:00.0: irq 51 for MSI/MSI-X
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:04:00.0: irq 52 for MSI/MSI-X
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:04:00.0: irq 53 for MSI/MSI-X
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:04:00.0: irq 54 for MSI/MSI-X
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:04:00.0: irq 55 for MSI/MSI-X
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:04:00.0: irq 56 for MSI/MSI-X
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:04:00.0: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:04:00.0: irq 58 for MSI/MSI-X
hpsa 0000:04:00.0: hpsa0: at IRQ 51 using DAC
scsi0 : hpsa
hpsa 0000:04:00.0: RAID device c0b3t0l0 added.
hpsa 0000:04:00.0: Direct-Access device c0b0t0l0 added.
hpsa 0000:04:00.0: Direct-Access device c0b0t0l1 added.
scsi 0:3:0:0: RAID HP P410i 5.70 PQ: 0 ANSI: 5
scsi 0:0:0:0: Direct-Access HP LOGICAL VOLUME 5.70 PQ: 0 ANSI: 5
scsi 0:0:0:1: Direct-Access HP LOGICAL VOLUME 5.70 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1720102192 512-byte logical blocks: (880 GB/820 GiB)
sd 0:0:0:1: [sdb] 286677120 512-byte logical blocks: (146 GB/136 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 6b 00 00 08
sd 0:0:0:1: [sdb] Write Protect is off
sd 0:0:0:1: [sdb] Mode Sense: 6b 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:1: [sdb] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes vg0/Swap vg0/Root
dracut: inactive '/dev/vg0/Root' [108.00 GiB] inherit
dracut: inactive '/dev/vg0/Swap' [8.00 GiB] inherit
dracut: inactive '/dev/vg0/Local' [2.00 GiB] inherit
dracut: inactive '/dev/vg0/Var' [4.00 GiB] inherit
dracut: inactive '/dev/vg0/VarLog' [20.00 GiB] inherit
dracut: inactive '/dev/vg0/Home' [2.00 GiB] inherit
dracut: inactive '/dev/vg0/Opt' [2.00 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg0-Root
dracut: Loading SELinux policy
SELinux: 2048 avtab hash slots, 278203 rules.
SELinux: 2048 avtab hash slots, 278203 rules.
SELinux: 9 users, 12 roles, 3899 types, 205 bools, 1 sens, 1024 cats
SELinux: 81 classes, 278203 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1374173673.746:2): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 May 15 2013
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:02:00.0: setting latency timer to 64
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:02:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 16, node addr 18:a9:05:50:98:26
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
bnx2 0000:02:00.1: setting latency timer to 64
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:02:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f2000000, IRQ 17, node addr 18:a9:05:50:98:28
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
bnx2 0000:03:00.0: setting latency timer to 64
bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:03:00.0: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 18, node addr 18:a9:05:50:98:2a
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
bnx2 0000:03:00.1: setting latency timer to 64
bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:03:00.1: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 19, node addr 18:a9:05:50:98:2c
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-1a-05
Microcode Update Driver: v2.00 , Peter Oruba
scsi 0:3:0:0: Attached scsi generic sg0 type 12
sd 0:0:0:0: Attached scsi generic sg1 type 0
sd 0:0:0:1: Attached scsi generic sg2 type 0
hpwdt 0000:01:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF), priority: LAST (default = 0/LAST).
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.3.0, timer margin: 30 seconds (nowayout=0).
hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
power_meter ACPI000D:00: Found ACPI power meter.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-5, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-6, type ext4), uses xattr
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-3, type ext4), uses xattr
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-4, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 8388600k swap on /dev/mapper/vg0-Swap. Priority:-1 extents:1 across:8388600k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 67 for MSI/MSI-X
bnx2 0000:02:00.0: eth0: using MSIX
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2 0000:02:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1600 MHz, 2400 MHz
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
eth0: no IPv6 routers present
readahead-collector: sorting
readahead-collector: finished
type=1400 audit(1374166517.211:34919): avc: denied { execute } for pid=2543 comm="sshd" name="auth-wrapper-helper" dev=dm-0 ino=11827 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:etc_t:s0 tclass=file
type=1400 audit(1374166517.211:34920): avc: denied { execute_no_trans } for pid=2543 comm="sshd" path="/etc/ssh/auth-wrapper-helper" dev=dm-0 ino=11827 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:etc_t:s0 tclass=file
type=1400 audit(1374166517.738:34921): avc: denied { write } for pid=2551 comm="xauth" name="root" dev=dm-3 ino=103 scontext=unconfined_u:unconfined_r:xauth_t:s0-s0:c0.c1023 tcontext=system_u:object_r:var_t:s0 tclass=dir
type=1400 audit(1374166517.738:34922): avc: denied { add_name } for pid=2551 comm="xauth" name="efo-c" scontext=unconfined_u:unconfined_r:xauth_t:s0-s0:c0.c1023 tcontext=system_u:object_r:var_t:s0 tclass=dir
type=1400 audit(1374166517.738:34923): avc: denied { create } for pid=2551 comm="xauth" name="efo-c" scontext=unconfined_u:unconfined_r:xauth_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:var_t:s0 tclass=file
type=1400 audit(1374166517.738:34924): avc: denied { open } for pid=2551 comm="xauth" name="efo-c" dev=dm-3 ino=152 scontext=unconfined_u:unconfined_r:xauth_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:var_t:s0 tclass=file
type=1400 audit(1374166517.738:34925): avc: denied { link } for pid=2551 comm="xauth" name="efo-c" dev=dm-3 ino=152 scontext=unconfined_u:unconfined_r:xauth_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:var_t:s0 tclass=file
type=1400 audit(1374166517.744:34926): avc: denied { remove_name } for pid=2551 comm="xauth" name="efo" dev=dm-3 ino=149 scontext=unconfined_u:unconfined_r:xauth_t:s0-s0:c0.c1023 tcontext=system_u:object_r:var_t:s0 tclass=dir
type=1400 audit(1374166517.744:34927): avc: denied { unlink } for pid=2551 comm="xauth" name="efo" dev=dm-3 ino=149 scontext=unconfined_u:unconfined_r:xauth_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:var_t:s0 tclass=file
type=1400 audit(1374170087.244:34928): avc: denied { write } for pid=2022 comm="ntpd" name="ntp.drift.TEMP" dev=dm-0 ino=31 scontext=system_u:system_r:ntpd_t:s0 tcontext=system_u:object_r:etc_t:s0 tclass=file
type=1400 audit(1374170448.196:34929): avc: denied { execute } for pid=19911 comm="sshd" name="auth-wrapper-helper" dev=dm-0 ino=11827 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:etc_t:s0 tclass=file
type=1400 audit(1374170448.196:34930): avc: denied { execute_no_trans } for pid=19911 comm="sshd" path="/etc/ssh/auth-wrapper-helper" dev=dm-0 ino=11827 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:etc_t:s0 tclass=file