dmesg - AIO
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-358.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Fri Feb 22 00:31:26 UTC 2013
Command line: ro root=/dev/mapper/vg_livedvd-lv_root rd_NO_LUKS rd_LVM_LV=vg_livedvd/lv_root LANG=zh_TW.UTF-8 rd_NO_MD crashkernel=128M rd_LVM_LV=vg_livedvd/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000deb8e000 (usable)
BIOS-e820: 00000000deb8e000 - 00000000df141000 (reserved)
BIOS-e820: 00000000df141000 - 00000000df395000 (ACPI NVS)
BIOS-e820: 00000000df395000 - 00000000df3a2000 (ACPI data)
BIOS-e820: 00000000df3a2000 - 00000000df3c1000 (ACPI NVS)
BIOS-e820: 00000000df3c1000 - 00000000df3c6000 (ACPI data)
BIOS-e820: 00000000df3c6000 - 00000000df409000 (ACPI NVS)
BIOS-e820: 00000000df409000 - 00000000df800000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
DMI 2.6 present.
SMBIOS version 2.6 @ 0xF0480
DMI: System manufacturer System Product Name/P8Z68-V LE, BIOS 3903 08/22/2012
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FF0000000 write-back
2 base 110000000 mask FF8000000 write-back
3 base 118000000 mask FFC000000 write-back
4 base 11C000000 mask FFE000000 write-back
5 base 11E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 256MB, type WB
reg 2, base: 4352MB, range: 128MB, type WB
reg 3, base: 4480MB, range: 64MB, type WB
reg 4, base: 4544MB, range: 32MB, type WB
reg 5, base: 4576MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 4080M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4592MB, range: 16MB, type UC
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000df800000
0000000000 - 00df800000 page 2M
kernel direct mapping tables up to df800000 @ 10000-15000
init_memory_mapping: 0000000100000000-000000011f000000
0100000000 - 011f000000 page 2M
kernel direct mapping tables up to 11f000000 @ 13000-19000
RAMDISK: 36fe7000 - 37fef5b8
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000df395078 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000df39f940 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000df395170 0A7C9 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 00000000df3bff80 00040
ACPI: APIC 00000000df39fa38 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000df39fad0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000df39fb10 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000df39fb48 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000df39feb8 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000df3a0868 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 00000000df3a1300 00078 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-000000011f000000
Bootmem setup node 0 0000000000000000-000000011f000000
NODE_DATA [0000000000014000 - 0000000000047fff]
bootmap [0000000000048000 - 000000000006bdff] pages 24
(8 early reservations) ==> bootmem [0000000000 - 011f000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201b0a4] TEXT DATA BSS ==> [0001000000 - 000201b0a4]
#3 [0036fe7000 - 0037fef5b8] RAMDISK ==> [0036fe7000 - 0037fef5b8]
#4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
#5 [000201c000 - 000201c40e] BRK ==> [000201c000 - 000201c40e]
#6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000]
found SMP MP-table at [ffff8800000fcd80] fcd80
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 4592MB)
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0011f000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000deb8e
0: 0x000df409 -> 0x000df800
0: 0x00100000 -> 0x0011f000
On node 0 totalpages: 1040146
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3820 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 894909 pages, LIFO batch:31
Normal zone: 1736 pages used for memmap
Normal zone: 125240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000deb8e000 - 00000000df141000
PM: Registered nosave memory: 00000000df141000 - 00000000df395000
PM: Registered nosave memory: 00000000df395000 - 00000000df3a2000
PM: Registered nosave memory: 00000000df3a2000 - 00000000df3c1000
PM: Registered nosave memory: 00000000df3c1000 - 00000000df3c6000
PM: Registered nosave memory: 00000000df3c6000 - 00000000df409000
PM: Registered nosave memory: 00000000df800000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at df800000 (gap: df800000:18800000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u262144
pcpu-alloc: s94552 r8192 d24232 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023969
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_livedvd-lv_root rd_NO_LUKS rd_LVM_LV=vg_livedvd/lv_root LANG=zh_TW.UTF-8 rd_NO_MD crashkernel=128M rd_LVM_LV=vg_livedvd/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3869652k/4702208k available (5220k kernel code, 541624k absent, 290932k reserved, 7121k data, 1264k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3410.903 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6821.80 BogoMIPS (lpj=3410903)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21428 entries in 85 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000df0d6000 end: 0x000000df0e4fff
dmar: No ATSR found
IOAPIC id 2 under DRHD base 0xfed90000
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Setting APIC routing to cluster x2apic
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (54574.44 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at df141000 (2441216 bytes)
PM: Registering ACPI NVS region at df3a2000 (126976 bytes)
PM: Registering ACPI NVS region at df3c6000 (274432 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20090903/nsinit-347)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xf730b000-0xf730b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf7308000-0xf73083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf7300000-0xf7303fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf7307000-0xf73073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf7306000-0xf73067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf7305000-0xf73050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xf7200000-0xf7207fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xf7100000-0xf7107fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.6: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:1c.7: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.7: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.7: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.7: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.7: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.7: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.7: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.7: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.7: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.7: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.7: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:06:00.0: bridge window [io 0xfff000-0x0000] (disabled)
pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:06:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 29 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 25, 26, 27, 28, 29, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 25 for MSI
hpet: hpet3 irq 26 for MSI
hpet: hpet4 irq 27 for MSI
hpet: hpet5 irq 28 for MSI
hpet: hpet6 irq 29 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x0200-0x020f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
pnp 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0290-0x029f]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0c: [io 0x03f8-0x03ff]
pnp 00:0c: [irq 4]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0d: [mem 0xfed10000-0xfed17fff]
pnp 00:0d: [mem 0xfed18000-0xfed18fff]
pnp 00:0d: [mem 0xfed19000-0xfed19fff]
pnp 00:0d: [mem 0xf8000000-0xfbffffff]
pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
pnp 00:0d: [mem 0xfed90000-0xfed93fff]
pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
pnp 00:0d: [mem 0xff000000-0xffffffff]
pnp 00:0d: [mem 0xfee00000-0xfeefffff]
pnp 00:0d: [mem 0xf2200000-0xf2200fff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x0200-0x020f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0d: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0d: [mem 0xf2200000-0xf2200fff] has been reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io disabled]
pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem disabled]
pci 0000:00:1c.6: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [mem disabled]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem disabled]
pci 0000:00:1c.7: bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:06:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:06: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:06: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:06: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:07: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:07: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:07: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:07: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:07: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:07: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:07: resource 17 [mem 0xe0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:03:00.0: PCI INT A disabled
pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:04:00.0: PCI INT A disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16417k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1372132104.534:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7589
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 6AA10540A705B299
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 30 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000df0ee018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000df0efa98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000df0f0c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf7308000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7307000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-358.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2013-06-25 03:48:25 UTC (1372132105)
Initalizing network drop monitor service
Freeing unused kernel memory: 1264k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 904k freed
Freeing unused kernel memory: 1676k freed
dracut: dracut-004-303.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
udev: starting version 147
ACPI: WMI: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5000a2)
[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.16.68.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:01:00.0: DCB version 4.0
[drm] nouveau 0000:01:00.0: DCB outp 00: 01000302 00020030
[drm] nouveau 0000:01:00.0: DCB outp 01: 02000300 00000000
[drm] nouveau 0000:01:00.0: DCB outp 02: 01032310 00000000
[drm] nouveau 0000:01:00.0: DCB outp 03: 02021362 00020010
[drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:01:00.0: DCB conn 01: 00002161
[drm] nouveau 0000:01:00.0: DCB conn 02: 00000200
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6B8A
[drm] nouveau 0000:01:00.0: 0x6E4C: Condition still not met after 20ms, skipping following opcodes
usb 1-1: new high speed USB device number 2 using ehci_hcd
[drm] nouveau 0000:01:00.0: 0x6E50: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x702A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x7EF8
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x7F1A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x807C
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x80E1
[drm] nouveau 0000:01:00.0: 0x6A0A: Condition still not met after 20ms, skipping following opcodes
[TTM] Zone kernel: Available graphics memory: 1944958 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR2)
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
[drm] nouveau 0000:01:00.0: 3 available performance level(s)
[drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 900mV
[drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 324MHz voltage 900mV
[drm] nouveau 0000:01:00.0: 3: core 625MHz shader 1360MHz memory 400MHz voltage 1100mV
[drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 324MHz voltage 900mV
[drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Refined TSC clocksource calibration: 3411.126 MHz.
Switching to clocksource tsc
[drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x320000, bo ffff8801180dd400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
dracut: Starting plymouth daemon
usb 2-1.6: new full speed USB device number 3 using ehci_hcd
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x4 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7306000 port 0xf7306200 irq 31
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 2-1.6: New USB device found, idVendor=0557, idProduct=8021
usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.6: configuration #1 chosen from 1 choice
hub 2-1.6:1.0: USB hub found
hub 2-1.6:1.0: 4 ports detected
usb 2-1.6.1: new low speed USB device number 4 using ehci_hcd
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI _SDD failed (AE 0x5)
usb 2-1.6.1: New USB device found, idVendor=0557, idProduct=2213
usb 2-1.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6.1: Product: CS84U V1.1.101
usb 2-1.6.1: Manufacturer: ATEN Advance Tech Inc.
usb 2-1.6.1: configuration #1 chosen from 1 choice
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI _SDD failed (AE 0x5)
ata3.00: ACPI: failed the second time, disabled
ata3.00: ATA-9: SED2E-M SATA SSD 32GB, M0328A4K, max UDMA/133
ata3.00: 62423040 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SED2E-M SATA SSD M032 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 62423040 512-byte logical blocks: (31.9 GB/29.7 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
input: ATEN Advance Tech Inc. CS84U V1.1.101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input4
generic-usb 0003:0557:2213.0001: input,hidraw0: USB HID v1.00 Keyboard [ATEN Advance Tech Inc. CS84U V1.1.101] on usb-0000:00:1d.0-1.6.1/input0
input: ATEN Advance Tech Inc. CS84U V1.1.101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.1/input/input5
generic-usb 0003:0557:2213.0002: input,hidraw1: USB HID v1.00 Mouse [ATEN Advance Tech Inc. CS84U V1.1.101] on usb-0000:00:1d.0-1.6.1/input1
dracut: Scanning devices sda2 for LVM logical volumes vg_livedvd/lv_root vg_livedvd/lv_swap
dracut: inactive '/dev/vg_livedvd/lv_root' [25.43 GiB] inherit
dracut: inactive '/dev/vg_livedvd/lv_swap' [3.84 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_livedvd-lv_root
dracut: Loading SELinux policy
type=1404 audit(1372132117.165:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 276421 rules.
SELinux: 2048 avtab hash slots, 276421 rules.
SELinux: 9 users, 12 roles, 3889 types, 201 bools, 1 sens, 1024 cats
SELinux: 81 classes, 276421 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1372132117.485:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disabling MSI
snd_hda_intel 0000:01:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0xf000-0xf01f] conflicts with ACPI region SMBI [io 0xf000-0xf00f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sd 2:0:0:0: Attached scsi generic sg0 type 0
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x26
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x26
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x26
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x26
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x26
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x26
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x26
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x26
platform microcode: firmware: requesting intel-ucode/06-2a-07
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0x28, date = 2012-04-24
microcode: CPU1 updated to revision 0x28, date = 2012-04-24
microcode: CPU2 updated to revision 0x28, date = 2012-04-24
microcode: CPU3 updated to revision 0x28, date = 2012-04-24
microcode: CPU4 updated to revision 0x28, date = 2012-04-24
microcode: CPU5 updated to revision 0x28, date = 2012-04-24
microcode: CPU6 updated to revision 0x28, date = 2012-04-24
microcode: CPU7 updated to revision 0x28, date = 2012-04-24
xhci_hcd 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:03:00.0: setting latency timer to 64
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: irq 16, io mem 0xf7200000
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:03:00.0: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:03:00.0: irq 34 for MSI/MSI-X
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:03:00.0: irq 35 for MSI/MSI-X
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:03:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:03:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:03:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:03:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:03:00.0: irq 40 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-358.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:03:00.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-358.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:03:00.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:04:00.0: irq 17, io mem 0xf7100000
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
alloc irq_desc for 47 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-358.el6.x86_64 xhci_hcd
usb usb5: SerialNumber: 0000:04:00.0
usb usb5: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
usb usb6: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-358.el6.x86_64 xhci_hcd
usb usb6: SerialNumber: 0000:04:00.0
usb usb6: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
r8169 0000:05:00.0: irq 49 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xffffc90005088000, f4:6d:04:61:7e:3e, XID 0c900800 IRQ 49
r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
Adding 4030456k swap on /dev/mapper/vg_livedvd-lv_swap. Priority:-1 extents:1 across:4030456k SSD
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
readahead-disable-service: delaying service auditd
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.13 (Sep 07, 2012)
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.12 (Jun 04, 2012)
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
r8169 0000:05:00.0: firmware: requesting rtl_nic/rtl8168e-3.fw
r8169 0000:05:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
fuse init (API version 7.13)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
readahead-collector: starting delayed service auditd
readahead-collector: sorting
readahead-collector: finished
r8169 0000:05:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
r8169 0000:05:00.0: eth0: link down
r8169 0000:05:00.0: eth0: link up