dmesg - g1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-25-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #37-Ubuntu SMP Thu Jun 6 20:47:30 UTC 2013 (Ubuntu 3.8.0-25.37-generic 3.8.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003be8ffff] usable
BIOS-e820: [mem 0x000000003be90000-0x000000003be9bfff] ACPI data
BIOS-e820: [mem 0x000000003be9c000-0x000000003befffff] ACPI NVS
BIOS-e820: [mem 0x000000003bf00000-0x000000003bffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Acer Aspire 3650 /Grapevine2, BIOS V1.30 05/09/2006
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3be90 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 020000000 mask FF0000000 write-back
2 base 030000000 mask FF8000000 write-back
3 base 038000000 mask FFC000000 write-back
4 base 03BF00000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 512MB, type WB
reg 1, base: 512MB, range: 256MB, type WB
reg 2, base: 768MB, range: 128MB, type WB
reg 3, base: 896MB, range: 64MB, type WB
reg 4, base: 959MB, range: 1MB, type UC
total RAM covered: 959M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 959MB, range: 1MB, type UC
reg 2, base: 960MB, range: 64MB, type UC
found SMP MP-table at [mem 0x000f7090-0x000f709f] mapped at [c00f7090]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x3432a000-0x3618cfff]
ACPI: RSDP 000f7000 00014 (v00 Acer )
ACPI: RSDT 3be95a7a 00038 (v01 Acer RSDT 06040000 LTP 00000000)
ACPI: FACP 3be9bf0a 00074 (v01 Acer GrapeII 06040000 ATI 000F4240)
ACPI: DSDT 3be961d7 05D33 (v01 Acer BONEFISH 06040000 MSFT 0100000E)
ACPI: FACS 3be9cfc0 00040
ACPI: APIC 3be9bf7e 00046 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 3be9bfc4 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: SSDT 3be95fe7 001F0 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
ACPI: SSDT 3be95ab2 00535 (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
66MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3be8ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x3be8ffff]
On node 0 totalpages: 245277
free_area_init_node: node 0, pgdat c18f5dc0, node_mem_map f747d200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 134 pages used for memmap
HighMem zone: 16908 pages, LIFO batch:3
Using APIC driver default
SB4X0 revision 0x83
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
e820: [mem 0x3c000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7469000 s35008 r0 d22336 u57344
pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243359
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 1963008 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0003be90)
Memory: 928520k/981568k available (6253k kernel code, 52588k reserved, 2970k data, 788k init, 68168k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1903000 - 0xc19c8000 ( 788 kB)
.data : 0xc161b530 - 0xc1902100 (2970 kB)
.text : 0xc1000000 - 0xc161b530 (6253 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f6c06000 soft=f6c08000
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration failed
tsc: PIT calibration matches PMTIMER. 1 loops
tsc: Detected 1466.746 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2933.49 BogoMIPS (lpj=5866984)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Disabled fast string operations
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26121 entries in 52 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) M CPU 410 @ 1.46GHz (fam: 06, model: 0e, stepping: 08)
Performance Events: Core events, core PMU driver.
... version: 1
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
Brought up 1 CPUs
smpboot: Total of 1 processors activated (2933.49 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x3be9c000-0x3befffff] (409600 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-0d] at [mem 0xe0000000-0xe0dfffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe0dfffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x3c000000-0xfebfffff] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
PCI: root bus 00: using default resources
pci_root PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0d] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci 0000:00:00.0: [1002:5a31] type 00 class 0x060000
pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400
pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xd0404000-0xd0404fff]
pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
pci 0000:00:13.1: reg 10: [mem 0xd0405000-0xd0405fff]
pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xd0406000-0xd0406fff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
pci 0000:00:14.0: reg 10: [io 0x8400-0x840f]
pci 0000:00:14.0: reg 14: [mem 0xd0407000-0xd04073ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0x8428-0x842f]
pci 0000:00:14.1: reg 14: [io 0x8434-0x8437]
pci 0000:00:14.1: reg 18: [io 0x8420-0x8427]
pci 0000:00:14.1: reg 1c: [io 0x8430-0x8433]
pci 0000:00:14.1: reg 20: [io 0x8410-0x841f]
pci 0000:00:14.2: [1002:437b] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xd0400000-0xd0403fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
pci 0000:01:05.0: [1002:5a62] type 00 class 0x030000
pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
pci 0000:01:05.0: reg 18: [mem 0xd0000000-0xd000ffff]
pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref]
pci 0000:09:04.0: [1524:1410] type 02 class 0x060700
pci 0000:09:04.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:09:04.0: supports D1 D2
pci 0000:09:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:06.0: [10ec:8139] type 00 class 0x020000
pci 0000:09:06.0: reg 10: [io 0xa000-0xa0ff]
pci 0000:09:06.0: reg 14: [mem 0xd0100000-0xd01000ff]
pci 0000:09:06.0: supports D1 D2
pci 0000:09:06.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 09-0e] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci 0000:09:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci_bus 0000:0a: busn_res: can not insert [bus 0a-ff] under [bus 09-0e] (conflicts with (null) [bus 09-0e])
pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 0d
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3be90000-0x3bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs SYN0701 SYN0700 SYN0002 PNP0f13 (active)
system 00:07: [io 0x1080] has been reserved
system 00:07: [io 0x0220-0x022f] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0530-0x0537] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x8000-0x805f] has been reserved
system 00:07: [io 0xfd60-0xfd6f] has been reserved
system 00:07: [io 0x8100-0x81ff window] has been reserved
system 00:07: [io 0x8210-0x821f] has been reserved
system 00:07: [io 0x0f40-0x0f47] has been reserved
system 00:07: [io 0x0280-0x0293] has been reserved
system 00:07: [io 0x087f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Switching to clocksource acpi_pm
pci 0000:09:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 09-0e] add_size 4000000
pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:14.4: BAR 15: assigned [mem 0x3c000000-0x3fffffff pref]
pci 0000:01:05.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref]
pci 0000:09:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:09:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:09:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:09:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:09:04.0: BAR 0: assigned [mem 0x40000000-0x40000fff]
pci 0000:09:04.0: BAR 15: assigned [mem 0x3c000000-0x3fffffff pref]
pci 0000:09:04.0: BAR 16: assigned [mem 0x44000000-0x47ffffff]
pci 0000:09:04.0: BAR 13: assigned [io 0xa400-0xa4ff]
pci 0000:09:04.0: BAR 14: assigned [io 0xa800-0xa8ff]
pci 0000:09:04.0: CardBus bridge to [bus 0a-0d]
pci 0000:09:04.0: bridge window [io 0xa400-0xa4ff]
pci 0000:09:04.0: bridge window [io 0xa800-0xa8ff]
pci 0000:09:04.0: bridge window [mem 0x3c000000-0x3fffffff pref]
pci 0000:09:04.0: bridge window [mem 0x44000000-0x47ffffff]
pci 0000:00:14.4: PCI bridge to [bus 09-0e]
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:00:14.4: bridge window [mem 0x3c000000-0x3fffffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd00fffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]
pci_bus 0000:09: resource 0 [io 0xa000-0xafff]
pci_bus 0000:09: resource 1 [mem 0xd0100000-0xd01fffff]
pci_bus 0000:09: resource 2 [mem 0x3c000000-0x3fffffff pref]
pci_bus 0000:09: resource 4 [io 0x0000-0xffff]
pci_bus 0000:09: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:0a: resource 0 [io 0xa400-0xa4ff]
pci_bus 0000:0a: resource 1 [io 0xa800-0xa8ff]
pci_bus 0000:0a: resource 2 [mem 0x3c000000-0x3fffffff pref]
pci_bus 0000:0a: resource 3 [mem 0x44000000-0x47ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31116k freed
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1370838916.531:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1741
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 14
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
isapnp: Scanning for PnP cards...
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xd0406000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-25-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0404000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-25-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0405000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-25-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
isapnp: No Plug & Play device found
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e20f7ab6198de3fe93af1d459153b337d0197de2'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:03: setting system clock to 2013-06-10 04:35:17 UTC (1370838917)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=13fe, idProduct=5100
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB DISK 3.0
usb 1-1: Manufacturer:
usb 1-1: SerialNumber: 070725C888640A40
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 788k freed
Write protecting the kernel text: 6256k
Write protecting the kernel read-only data: 2432k
NX-protecting the kernel data: 3984k
udevd[164]: starting version 175
Disabling lock debugging due to kernel taint
pata_atiixp 0000:00:14.1: setting latency timer to 64
Initializing USB Mass Storage driver...
scsi0 : pata_atiixp
scsi1 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi2 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
wmi: Mapper loaded
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:09:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too: 8139too Fast Ethernet driver 0.9.28
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:19/LNXVIDEO:00/input/input5
[drm] Initialized drm 1.1.0 20060810
8139too 0000:09:06.0 eth0: RealTek RTL8139 at 0x0001a000, 00:16:d4:16:b7:79, IRQ 22
ata1.01: ATAPI: PHILIPS CD-RW/DVD-ROM SCB5265, TY01, max UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:1:0: CD-ROM PHILIPS CDRW/DVD SCB5265 TY01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg0 type 5
usb 2-3: new full-speed USB device number 2 using ohci_hcd
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RS400 0x1002:0x5A62 0x1025:0x0109).
[drm] register mmio base: 0xD0000000
[drm] register mmio size: 65536
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:05.0: VRAM: 64M 0x000000003C000000 - 0x000000003FFFFFFF (64M used)
radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=64M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 446140 kiB
[TTM] Zone highmem: Available graphics memory: 480224 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 64M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 3 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000035700000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000040000000 and cpu addr 0xf5694000
[drm] Loading R300 Microcode
[drm] radeon: ring at 0x0000000040001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Panel ID String: AUO
[drm] Panel Size 1280x800
[drm] radeon legacy LVDS backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC2
[drm] Connector 1:
[drm] LVDS-1
[drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[drm] Encoders:
[drm] LCD1: INTERNAL_LVDS
[drm] Connector 2:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
[drm] fb mappable at 0xD8040000
[drm] vram apper at 0xD8000000
[drm] size 4096000
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:05.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:01:05.0 on minor 0
usb 2-3: New USB device found, idVendor=046d, idProduct=c52f
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: USB Receiver
usb 2-3: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb2/2-3/2-3:1.0/input/input6
hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb2/2-3/2-3:1.1/input/input7
hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input1
xor: automatically using best checksumming function:
pIII_sse : 3782.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
scsi 1:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 4
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sda] 61767680 512-byte logical blocks: (31.6 GB/29.4 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] No Caching mode page present
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
Btrfs loaded
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 1315836k swap on /dev/sda5. Priority:-1 extents:1 across:1315836k
EXT4-fs (sda1): re-mounted. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[672]: starting version 175
lp: driver loaded but no devices found
init: avahi-cups-reload main process (725) terminated with status 1
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ppdev: user-space parallel port driver
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
type=1400 audit(1370838940.414:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=752 comm="apparmor_parser"
type=1400 audit(1370838940.418:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=752 comm="apparmor_parser"
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
type=1400 audit(1370838941.566:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=887 comm="apparmor_parser"
type=1400 audit(1370838941.566:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=887 comm="apparmor_parser"
type=1400 audit(1370838941.566:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser"
microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
init: failsafe main process (896) killed by TERM signal
device-mapper: multipath: version 1.5.1 loaded
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0, board id: 3655, fw id: 41763
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
type=1400 audit(1370838942.578:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1020 comm="apparmor_parser"
type=1400 audit(1370838942.618:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1025 comm="apparmor_parser"
type=1400 audit(1370838942.618:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1025 comm="apparmor_parser"
type=1400 audit(1370838942.650:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1029 comm="apparmor_parser"
type=1400 audit(1370838942.650:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1029 comm="apparmor_parser"
yenta_cardbus 0000:09:04.0: CardBus bridge found [1025:0109]
yenta_cardbus 0000:09:04.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:09:04.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:09:04.0: TI: mfunc 0x00111212, devctl 0x44
yenta_cardbus 0000:09:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
yenta_cardbus 0000:09:04.0: Socket status: 30000006
yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff:
excluding 0xa000-0xa0ff 0xa400-0xa4ff 0xa800-0xa8ff
yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xd0100000-0xd01fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0100000-0xd01fffff:
excluding 0xd0100000-0xd010ffff
yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x3c000000-0x3fffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x3c000000-0x3fffffff:
excluding 0x3c000000-0x3fffffff
microcode: Microcode Update Driver: v2.00 , Peter Oruba
8139too 0000:09:06.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
acer_wmi: Acer Laptop ACPI-WMI Extras
excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x280-0x297 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
acer_wmi: Function bitmap for Communication Device: 0x20
acer_wmi: Disabling ACPI video driver
input: Acer BMA150 accelerometer as /devices/virtual/input/input9
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
excluding 0x878-0x87f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcffff 0xdc000-0xdffff 0xe4000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
snd_hda_intel 0000:00:14.2: irq 40 for MSI/MSI-X
init: alsa-restore main process (1167) terminated with status 19
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Creating 1 devices ...
Adding 480220k swap on /dev/zram0. Priority:100 extents:1 across:480220k SS
init: gdm main process (1259) killed by TERM signal
init: plymouth-stop pre-start process (1633) terminated with status 1
8139too 0000:09:06.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-hostnamed[3490]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[7371]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!