dmesg - GCC_4.8
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-31-generic (root@OLIVEHILL) (gcc version 4.8.0 (GCC) ) #52 SMP Wed May 29 23:12:20 MDT 2013 (Ubuntu 3.5.0-31.52-generic 3.5.7.11)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000009d33ffff] usable
BIOS-e820: [mem 0x000000009d340000-0x000000009d4c5fff] reserved
BIOS-e820: [mem 0x000000009d4c6000-0x000000009d60efff] usable
BIOS-e820: [mem 0x000000009d60f000-0x000000009dad7fff] ACPI NVS
BIOS-e820: [mem 0x000000009dad8000-0x000000009e62efff] reserved
BIOS-e820: [mem 0x000000009e62f000-0x000000009e62ffff] usable
BIOS-e820: [mem 0x000000009e630000-0x000000009e637fff] ACPI NVS
BIOS-e820: [mem 0x000000009e638000-0x000000009e780fff] usable
BIOS-e820: [mem 0x000000009e781000-0x000000009ec2dfff] reserved
BIOS-e820: [mem 0x000000009ec2e000-0x000000009ec70fff] usable
BIOS-e820: [mem 0x000000009ec71000-0x000000009eff1fff] reserved
BIOS-e820: [mem 0x000000009eff2000-0x000000009effffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x9d693000 ACPI 2.0=0x9d693000 SMBIOS=0xf04c0 MPS=0xfd3f0
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003f000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002450000) (20MB)
efi: mem06: type=7, attr=0xf, range=[0x0000000002450000-0x00000000362ba000) (830MB)
efi: mem07: type=2, attr=0xf, range=[0x00000000362ba000-0x0000000037155000) (14MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000037155000-0x0000000069ab8000) (809MB)
efi: mem09: type=2, attr=0xf, range=[0x0000000069ab8000-0x000000008e171000) (582MB)
efi: mem10: type=7, attr=0xf, range=[0x000000008e171000-0x000000008e177000) (0MB)
efi: mem11: type=1, attr=0xf, range=[0x000000008e177000-0x000000008e195000) (0MB)
efi: mem12: type=7, attr=0xf, range=[0x000000008e195000-0x0000000091813000) (54MB)
efi: mem13: type=4, attr=0xf, range=[0x0000000091813000-0x000000009183e000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x000000009183e000-0x0000000091851000) (0MB)
efi: mem15: type=4, attr=0xf, range=[0x0000000091851000-0x0000000091859000) (0MB)
efi: mem16: type=7, attr=0xf, range=[0x0000000091859000-0x000000009185a000) (0MB)
efi: mem17: type=4, attr=0xf, range=[0x000000009185a000-0x000000009185b000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x000000009185b000-0x000000009185f000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x000000009185f000-0x000000009cd40000) (180MB)
efi: mem20: type=7, attr=0xf, range=[0x000000009cd40000-0x000000009d0d6000) (3MB)
efi: mem21: type=3, attr=0xf, range=[0x000000009d0d6000-0x000000009d340000) (2MB)
efi: mem22: type=0, attr=0xf, range=[0x000000009d340000-0x000000009d38e000) (0MB)
efi: mem23: type=0, attr=0xf, range=[0x000000009d38e000-0x000000009d4c6000) (1MB)
efi: mem24: type=7, attr=0xf, range=[0x000000009d4c6000-0x000000009d606000) (1MB)
efi: mem25: type=2, attr=0xf, range=[0x000000009d606000-0x000000009d60f000) (0MB)
efi: mem26: type=10, attr=0xf, range=[0x000000009d60f000-0x000000009d6a9000) (0MB)
efi: mem27: type=10, attr=0xf, range=[0x000000009d6a9000-0x000000009d6b1000) (0MB)
efi: mem28: type=10, attr=0xf, range=[0x000000009d6b1000-0x000000009dad8000) (4MB)
efi: mem29: type=6, attr=0x800000000000000f, range=[0x000000009dad8000-0x000000009e53c000) (10MB)
efi: mem30: type=6, attr=0x800000000000000f, range=[0x000000009e53c000-0x000000009e5e9000) (0MB)
efi: mem31: type=5, attr=0x800000000000000f, range=[0x000000009e5e9000-0x000000009e5f7000) (0MB)
efi: mem32: type=5, attr=0x800000000000000f, range=[0x000000009e5f7000-0x000000009e62f000) (0MB)
efi: mem33: type=4, attr=0xf, range=[0x000000009e62f000-0x000000009e630000) (0MB)
efi: mem34: type=10, attr=0xf, range=[0x000000009e630000-0x000000009e638000) (0MB)
efi: mem35: type=4, attr=0xf, range=[0x000000009e638000-0x000000009e781000) (1MB)
efi: mem36: type=6, attr=0x800000000000000f, range=[0x000000009e781000-0x000000009ec2e000) (4MB)
efi: mem37: type=4, attr=0xf, range=[0x000000009ec2e000-0x000000009ec4a000) (0MB)
efi: mem38: type=3, attr=0xf, range=[0x000000009ec4a000-0x000000009ec64000) (0MB)
efi: mem39: type=4, attr=0xf, range=[0x000000009ec64000-0x000000009ec65000) (0MB)
efi: mem40: type=3, attr=0xf, range=[0x000000009ec65000-0x000000009ec67000) (0MB)
efi: mem41: type=4, attr=0xf, range=[0x000000009ec67000-0x000000009ec71000) (0MB)
efi: mem42: type=6, attr=0x800000000000000f, range=[0x000000009ec71000-0x000000009eff2000) (3MB)
efi: mem43: type=4, attr=0xf, range=[0x000000009eff2000-0x000000009f000000) (0MB)
efi: mem44: type=7, attr=0xf, range=[0x0000000100001000-0x000000013f000000) (1007MB)
efi: mem45: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fec01000-0x00000000fec02000) (0MB)
efi: mem47: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem48: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
efi: mem49: type=11, attr=0x8000000000000001, range=[0x00000000fed40000-0x00000000fed45000) (0MB)
efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
efi: mem51: type=11, attr=0x8000000000000001, range=[0x00000000fed81000-0x00000000fed90000) (0MB)
efi: mem52: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./Kabini CRB, BIOS 4.6.5 04/15/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFE0000000 write-back
2 base 009F000000 mask FFFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000013f000000 aka 5104M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2544MB, range: 16MB, type UC
total RAM covered: 2544M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2544MB, range: 16MB, type UC
e820: update [mem 0x9f000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd620-0x000fd62f] mapped at [ffff8800000fd620]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x9effffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0x9effffff] page 2M
kernel direct mapping tables up to 0x9effffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100001000-0x13effffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13effffff] page 2M
kernel direct mapping tables up to 0x13effffff @ [mem 0x9d60c000-0x9d60efff]
RAMDISK: [mem 0x362ba000-0x37154fff]
ACPI: RSDP 000000009d693000 00024 (v02 ALASKA)
ACPI: XSDT 000000009d693088 00094 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000009d697bf0 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
ACPI: DSDT 000000009d6931b8 04A38 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 000000009dacd080 00040
ACPI: APIC 000000009d697d00 0007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000009d697d80 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000009d697dc8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 000000009d697e08 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: ASF! 000000009d697e40 000D6 (v32 AMD SB700ASF 00000001 TFSM 000F4240)
ACPI: BGRT 000000009d697f18 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 000000009d697f50 00CB4 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 000000009d698c08 06352 (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: CRAT 000000009d69ef60 003A8 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 000000009d69f308 013CA (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 000000009d6a06d8 0008C (v01 AMD CPMDFMOT 00000001 INTL 20051117)
ACPI: SSDT 000000009d6a0768 010E5 (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 000000009d6a1850 00D61 (v01 AMD CPMZPODD 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013effffff]
Initmem setup node 0 [mem 0x00000000-0x13effffff]
NODE_DATA [mem 0x13effc000-0x13effffff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009ffff]
node 0: [mem 0x00100000-0x9d33ffff]
node 0: [mem 0x9d4c6000-0x9d60efff]
node 0: [mem 0x9e62f000-0x9e62ffff]
node 0: [mem 0x9e638000-0x9e780fff]
node 0: [mem 0x9ec2e000-0x9ec70fff]
node 0: [mem 0x9eff2000-0x9effffff]
node 0: [mem 0x100001000-0x13effffff]
On node 0 totalpages: 902579
DMA zone: 64 pages used for memmap
DMA zone: 10 pages reserved
DMA zone: 3910 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 624228 pages, LIFO batch:31
Normal zone: 4032 pages used for memmap
Normal zone: 254015 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x06] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 000000009d340000 - 000000009d4c6000
PM: Registered nosave memory: 000000009d60f000 - 000000009dad8000
PM: Registered nosave memory: 000000009dad8000 - 000000009e62f000
PM: Registered nosave memory: 000000009e630000 - 000000009e638000
PM: Registered nosave memory: 000000009e781000 - 000000009ec2e000
PM: Registered nosave memory: 000000009ec71000 - 000000009eff2000
PM: Registered nosave memory: 000000009f000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000
PM: Registered nosave memory: 00000000fec02000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0x9f000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88013ec00000 s83456 r8192 d23040 u524288
pcpu-alloc: s83456 r8192 d23040 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 882153
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3266100k/5226496k available (6657k kernel code, 1616180k absent, 344216k reserved, 6511k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1024 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1996.107 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.21 BogoMIPS (lpj=7984428)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 009f000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
ACPI: Core revision 20120320
ftrace: allocating 24995 entries in 98 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Eng Sample: 2M201079J4461_00/20/08/06_9830 stepping 01
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (15968.85 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9d60f000-0x9dad7fff] (5017600 bytes)
PM: Registering ACPI NVS region [mem 0x9e630000-0x9e637fff] (32768 bytes)
dummy:
RTC time: 9:40:44, date: 06/04/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
pci 0000:00:01.0: [1002:9830] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:01.0: reg 18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 24: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: reg 30: [mem 0xfeb40000-0xfeb5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xfeb64000-0xfeb67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 10: [mem 0xfeb68000-0xfeb69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 24: [mem 0xfeb6f000-0xfeb6f3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfeb6e000-0xfeb6efff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfeb6d000-0xfeb6d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfeb6c000-0xfeb6cfff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfeb6b000-0xfeb6b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfeb60000-0xfeb63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 10: [mem 0xfeb6a000-0xfeb6a0ff 64bit]
pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [io 0xec00-0xecff]
pci 0000:01:00.0: reg 18: [mem 0xfea0f000-0xfea0ffff 64bit]
pci 0000:01:00.0: reg 20: [mem 0xd0800000-0xd0803fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.1: [10ec:816a] type 00 class 0x070002
pci 0000:01:00.1: reg 10: [io 0xe800-0xe8ff]
pci 0000:01:00.1: reg 18: [mem 0xfea0e000-0xfea0efff 64bit]
pci 0000:01:00.1: reg 20: [mem 0xfea08000-0xfea0bfff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.2: [10ec:816b] type 00 class 0x070002
pci 0000:01:00.2: reg 10: [io 0xe400-0xe4ff]
pci 0000:01:00.2: reg 18: [mem 0xfea0d000-0xfea0dfff 64bit]
pci 0000:01:00.2: reg 20: [mem 0xfea04000-0xfea07fff 64bit]
pci 0000:01:00.2: supports D1 D2
pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.3: [10ec:816c] type 00 class 0x0c0701
pci 0000:01:00.3: reg 10: [io 0xe000-0xe0ff]
pci 0000:01:00.3: reg 18: [mem 0xfea0c000-0xfea0c0ff 64bit]
pci 0000:01:00.3: reg 20: [mem 0xfea00000-0xfea03fff 64bit]
pci 0000:01:00.3: supports D1 D2
pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 01-01]
pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
pci 0000:00:02.3: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP1._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x19) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs *4 5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x9d340000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d60f000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e630000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e781000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9ec71000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [mem 0xa0000000-0xbfffffff]
system 00:02: [mem 0xa0000000-0xbfffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0010-0x001f]
pnp 00:03: [io 0x0022-0x003f]
pnp 00:03: [io 0x0063]
pnp 00:03: [io 0x0065]
pnp 00:03: [io 0x0067-0x006f]
pnp 00:03: [io 0x0072-0x007f]
pnp 00:03: [io 0x0080]
pnp 00:03: [io 0x0084-0x0086]
pnp 00:03: [io 0x0088]
pnp 00:03: [io 0x008c-0x008e]
pnp 00:03: [io 0x0090-0x009f]
pnp 00:03: [io 0x00a2-0x00bf]
pnp 00:03: [io 0x00b1]
pnp 00:03: [io 0x00e0-0x00ef]
pnp 00:03: [io 0x04d0-0x04d1]
pnp 00:03: [io 0x040b]
pnp 00:03: [io 0x04d6]
pnp 00:03: [io 0x0c00-0x0c01]
pnp 00:03: [io 0x0c14]
pnp 00:03: [io 0x0c50-0x0c51]
pnp 00:03: [io 0x0c52]
pnp 00:03: [io 0x0c6c]
pnp 00:03: [io 0x0c6f]
pnp 00:03: [io 0x0cd0-0x0cd1]
pnp 00:03: [io 0x0cd2-0x0cd3]
pnp 00:03: [io 0x0cd4-0x0cd5]
pnp 00:03: [io 0x0cd6-0x0cd7]
pnp 00:03: [io 0x0cd8-0x0cdf]
pnp 00:03: [io 0x0800-0x089f]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0b20-0x0b3f]
pnp 00:03: [io 0x0900-0x090f]
pnp 00:03: [io 0x0910-0x091f]
pnp 00:03: [io 0xfe00-0xfefe]
pnp 00:03: [io 0x0060-0x005f disabled]
pnp 00:03: [io 0x0064-0x0063 disabled]
pnp 00:03: [mem 0xfec00000-0xfec00fff]
pnp 00:03: [mem 0xfee00000-0xfee00fff]
pnp 00:03: [mem 0xfed80000-0xfed8ffff]
pnp 00:03: [mem 0xfed61000-0xfed70fff]
pnp 00:03: [mem 0xfec10000-0xfec10fff]
pnp 00:03: [mem 0xfed00000-0xfed00fff]
pnp 00:03: [mem 0xff000000-0xffffffff]
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [io 0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:03: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:03: [mem 0xff000000-0xffffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 4]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0081-0x0083]
pnp 00:05: [io 0x0087]
pnp 00:05: [io 0x0089-0x008b]
pnp 00:05: [io 0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x005f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x00f0-0x00ff]
pnp 00:09: [irq 13]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.3: PCI bridge to [bus 01-01]
pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
pci 0000:00:02.3: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
Freeing initrd memory: 14956k freed
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8d813000-0x91812fff] (64MB) mapped at [ffff88008d813000-ffff880091812fff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1370338844.620:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 6778
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90012180000, using 5120k, total 5120k
efifb: mode is 1280x1024x32, linelength=5120, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
serial 0000:01:00.1: enabling device (0001 -> 0003)
serial 0000:01:00.2: enabling device (0001 -> 0003)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb6d000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-31-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb6b000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-31-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb6e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-31-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb6c000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-31-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.0-31-generic xhci_hcd
usb usb5: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.5.0-31-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=14dd, idProduct=1006
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: D2CIM-DVUSB VM/CCID
usb 1-1: Manufacturer: Raritan
usb 1-1: SerialNumber: DB889DAAC915A47
usb 3-3: new low-speed USB device number 2 using ohci_hcd
Refined TSC clocksource calibration: 1996.256 MHz.
Switching to clocksource tsc
i8042: No controller found
Initializing USB Mass Storage driver...
mousedev: PS/2 mouse device common for all mice
scsi0 : usb-storage 1-1:1.0
rtc_cmos 00:06: RTC can wake from S4
scsi1 : usb-storage 1-1:1.1
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 1:385:676
vtconsole vtcon1: hash matches
rtc_cmos 00:06: setting system clock to 2013-06-04 09:40:46 UTC (1370338846)
powernow-k8: Found 1 AMD Eng Sample: 2M201079J4461_00/20/08/06_9830 (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2000 MHz)
powernow-k8: 1 : pstate 1 (1800 MHz)
powernow-k8: 2 : pstate 2 (1600 MHz)
powernow-k8: 3 : pstate 3 (1200 MHz)
powernow-k8: 4 : pstate 4 (1000 MHz)
powernow-k8: 5 : pstate 5 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1524k freed
Freeing unused kernel memory: 1112k freed
udevd[105]: starting version 175
usb 3-3: New USB device found, idVendor=14dd, idProduct=1007
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=7
usb 3-3: Product: D2CIM-DVUSB
usb 3-3: Manufacturer: Raritan
usb 3-3: SerialNumber: HUX33003370000007
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: enabling device (0000 -> 0003)
r8169 0000:01:00.0: irq 77 for MSI/MSI-X
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
r8169 0000:01:00.0: eth0: RTL8168dp/8111dp at 0xffffc900016a6000, 00:00:1a:1b:34:5a, XID 08b00000 IRQ 77
r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi2 : ahci
scsi3 : ahci
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ata1: SATA max UDMA/133 abar m1024@0xfeb6f000 port 0xfeb6f100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb6f000 port 0xfeb6f180 irq 19
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
mmc0: no vmmc regulator found
Registered led device: mmc0::
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: ATAPI: ASUS BC-12D1ST, 1.01, max UDMA/133
ata1.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM ASUS BC-12D1ST 1.01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
input: Raritan D2CIM-DVUSB as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input2
hid-generic 0003:14DD:1007.0001: input,hidraw0: USB HID v1.10 Keyboard [Raritan D2CIM-DVUSB] on usb-0000:00:12.0-3/input0
input: Raritan D2CIM-DVUSB as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input3
hid-generic 0003:14DD:1007.0002: input,hidraw1: USB HID v1.10 Mouse [Raritan D2CIM-DVUSB] on usb-0000:00:12.0-3/input1
input: Raritan D2CIM-DVUSB as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.2/input/input4
hid-generic 0003:14DD:1007.0003: input,hidraw2: USB HID v1.10 Mouse [Raritan D2CIM-DVUSB] on usb-0000:00:12.0-3/input2
scsi 1:0:0:0: Direct-Access Raritan Virtual Disc 2 0.01 PQ: 0 ANSI: 3
scsi 0:0:0:0: CD-ROM Raritan Virtual Disc 1 0.01 PQ: 0 ANSI: 3
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdb] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB)
sd 1:0:0:0: [sdb] Write Protect is on
sd 1:0:0:0: [sdb] Mode Sense: 03 00 80 00
sr1: scsi3-mmc drive: 0x/0x cd/rw tray
sr 0:0:0:0: Attached scsi CD-ROM sr1
sr 0:0:0:0: Attached scsi generic sg3 type 5
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Adding 3610620k swap on /dev/sda3. Priority:-1 extents:1 across:3610620k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[352]: starting version 175
lp: driver loaded but no devices found
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si 0000:01:00.3: probing via PCI
ipmi_si 0000:01:00.3: enabling device (0000 -> 0003)
ipmi_si 0000:01:00.3: [io 0xe000-0xe0ff] regsize 1 spacing 1 irq 35
ipmi_si: Adding PCI-specified kcs state machine
ipmi_si: Trying PCI-specified kcs state machine at i/o address 0xe000, slave address 0x0, irq 35
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI Error: [^^^PB2_.VGA_.AFN7] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCD_._BCM] (Node ffff880139044730), AE_NOT_FOUND (20120320/psparse-536)
ACPI Error: Evaluating _BCM failed (20120320/video-372)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
snd_hda_intel 0000:00:01.1: irq 78 for MSI/MSI-X
microcode: CPU0: patch_level=0x07000106
microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
microcode: CPU1: patch_level=0x07000106
microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
microcode: CPU2: patch_level=0x07000106
microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
microcode: CPU3: patch_level=0x07000106
microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
init: failsafe main process (804) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
type=1400 audit(1370338857.423:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=883 comm="apparmor_parser"
type=1400 audit(1370338857.423:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=883 comm="apparmor_parser"
type=1400 audit(1370338857.447:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=911 comm="apparmor_parser"
type=1400 audit(1370338857.451:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=909 comm="apparmor_parser"
type=1400 audit(1370338857.451:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=908 comm="apparmor_parser"
type=1400 audit(1370338857.451:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=909 comm="apparmor_parser"
type=1400 audit(1370338857.451:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=908 comm="apparmor_parser"
type=1400 audit(1370338857.451:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=911 comm="apparmor_parser"
type=1400 audit(1370338857.451:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=910 comm="apparmor_parser"
type=1400 audit(1370338857.451:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=911 comm="apparmor_parser"
r8169 0000:01:00.0: eth0: link down
r8169 0000:01:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:01:00.0: eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ipmi_si: There appears to be no BMC at this location
sdb: detected capacity change from 4051697664 to 0
usb 1-1: USB disconnect, device number 2