dmesg - generic
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-030800-generic (root@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201302181935 SMP Tue Feb 19 00:46:09 UTC 2013
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[ 0.000000] RAMDISK: [mem 0x3776a000-0x37bacfff]
[ 0.000000] ACPI: RSDP 000e0000 00024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 7fff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 7fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 7fff0410 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 7fff0200 00040
[ 0.000000] ACPI: SSDT 7fff0240 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] 1155MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x7ffeffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffeffff]
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c1921380, node_mem_map f676a200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2312 pages used for memmap
[ 0.000000] HighMem zone: 293610 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x80000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7be3000 s35008 r0 d22336 u57344
[ 0.000000] pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4194048 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007fff0)
[ 0.000000] Memory: 2059724k/2097088k available (6319k kernel code, 36912k reserved, 3078k data, 788k init, 1183688k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc192e000 - 0xc19f3000 ( 788 kB)
[ 0.000000] .data : 0xc162bdad - 0xc192d640 (3078 kB)
[ 0.000000] .text : 0xc1000000 - 0xc162bdad (6319 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5c06000 soft=f5c08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using PMTIMER reference calibration
[ 0.000000] tsc: Detected 1990.431 MHz processor
[ 0.016002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3980.86 BogoMIPS (lpj=7961724)
[ 0.016480] pid_max: default: 32768 minimum: 301
[ 0.020036] Security Framework initialized
[ 0.020692] AppArmor: AppArmor initialized
[ 0.021341] Yama: becoming mindful.
[ 0.022020] Mount-cache hash table entries: 512
[ 0.022844] Initializing cgroup subsys cpuacct
[ 0.024000] Initializing cgroup subsys memory
[ 0.024322] Initializing cgroup subsys devices
[ 0.025108] Initializing cgroup subsys freezer
[ 0.026405] Initializing cgroup subsys blkio
[ 0.026462] Initializing cgroup subsys perf_event
[ 0.028392] Initializing cgroup subsys hugetlb
[ 0.029475] mce: CPU supports 0 MCE banks
[ 0.030654] process: using mwait in idle threads
[ 0.031054] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.031054] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.031054] tlb_flushall_shift: 5
[ 0.063080] Freeing SMP alternatives: 24k freed
[ 0.086798] ACPI: Core revision 20121018
[ 0.088000] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.088167] ftrace: allocating 28640 entries in 56 pages
[ 0.100534] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.101291] smpboot: SMP motherboard not detected
[ 0.101985] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.104000] smpboot: SMP disabled
[ 0.104000] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 0.104000] Brought up 1 CPUs
[ 0.104000] smpboot: Total of 1 processors activated (3980.86 BogoMIPS)
[ 0.104019] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.104921] devtmpfs: initialized
[ 0.105700] EVM: security.selinux
[ 0.106371] EVM: security.SMACK64
[ 0.106988] EVM: security.capability
[ 0.108000] regulator-dummy: no parameters
[ 0.108000] NET: Registered protocol family 16
[ 0.108605] EISA bus registered
[ 0.109673] ACPI: bus type pci registered
[ 0.112127] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.113426] PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
[ 0.114250] PCI: Using configuration type 1 for base access
[ 0.115754] bio: create slab at 0
[ 0.116000] ACPI: Added _OSI(Module Device)
[ 0.116000] ACPI: Added _OSI(Processor Device)
[ 0.116259] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.117108] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.118412] ACPI: EC: Look up EC in DSDT
[ 0.120038] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.123518] ACPI: Interpreter enabled
[ 0.124000] ACPI: (supports S0 S5)
[ 0.124579] ACPI: Using PIC for interrupt routing
[ 0.126808] ACPI: No dock devices found.
[ 0.127475] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.128000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.128880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.129769] pci_root PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.132005] pci_root PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.133508] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.133512] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.133513] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.133515] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
[ 0.133520] PCI: root bus 00: using default resources
[ 0.133522] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.135116] PCI host bridge to bus 0000:00
[ 0.135825] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.136015] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.136780] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.137596] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.138015] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.138670] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.139167] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
[ 0.140174] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[ 0.141702] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.151380] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.152216] pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
[ 0.156772] pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
[ 0.163323] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.164491] pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
[ 0.165870] pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
[ 0.167215] pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
[ 0.172335] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 0.172453] pci 0000:00:05.0: reg 10: [io 0xd100-0xd1ff]
[ 0.172535] pci 0000:00:05.0: reg 14: [io 0xd200-0xd23f]
[ 0.173085] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.174302] pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
[ 0.181500] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.182288] pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
[ 0.183626] pci 0000:00:0b.0: reg 10: [mem 0xf0805000-0xf0805fff]
[ 0.190763] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.192154] pci 0000:00:0d.0: reg 10: [io 0xd240-0xd247]
[ 0.194536] pci 0000:00:0d.0: reg 18: [io 0xd250-0xd257]
[ 0.196344] pci 0000:00:0d.0: reg 20: [io 0xd260-0xd26f]
[ 0.197658] pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
[ 0.200187] pci_bus 0000:00: on NUMA node 0
[ 0.200266] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.204575] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 0.206284] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.207822] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.208000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.209533] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.210747] vgaarb: loaded
[ 0.212002] vgaarb: bridge control possible 0000:00:02.0
[ 0.212895] SCSI subsystem initialized
[ 0.213531] ACPI: bus type scsi registered
[ 0.214230] libata version 3.00 loaded.
[ 0.214260] ACPI: bus type usb registered
[ 0.214943] usbcore: registered new interface driver usbfs
[ 0.215689] usbcore: registered new interface driver hub
[ 0.216000] usbcore: registered new device driver usb
[ 0.216000] PCI: Using ACPI for IRQ routing
[ 0.216000] PCI: pci_cache_line_size set to 64 bytes
[ 0.216827] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.216858] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[ 0.217009] NetLabel: Initializing
[ 0.217552] NetLabel: domain hash size = 128
[ 0.220008] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.220875] NetLabel: unlabeled traffic allowed by default
[ 0.221787] Switching to clocksource refined-jiffies
[ 0.228173] AppArmor: AppArmor Filesystem Enabled
[ 0.229210] pnp: PnP ACPI init
[ 0.229906] ACPI: bus type pnp registered
[ 0.230645] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.230663] pnp 00:01: [dma 4]
[ 0.230684] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.230750] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.230781] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.231264] pnp: PnP ACPI: found 4 devices
[ 0.231913] ACPI: ACPI bus type pnp unregistered
[ 0.232000] PnPBIOS: Disabled by ACPI PNP
[ 0.269277] Switching to clocksource acpi_pm
[ 0.269973] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.269975] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.270023] NET: Registered protocol family 2
[ 0.270815] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.271623] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.272003] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.272003] TCP: reno registered
[ 0.272168] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.272904] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.273728] NET: Registered protocol family 1
[ 0.274411] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.274411] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.276177] pci 0000:00:02.0: Boot video device
[ 0.276527] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.277282] PCI: setting IRQ 11 as level-triggered
[ 0.277717] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.278464] PCI: setting IRQ 10 as level-triggered
[ 0.278540] PCI: CLS 0 bytes, default 64
[ 0.278581] Trying to unpack rootfs image as initramfs...
[ 0.364079] Freeing initrd memory: 4364k freed
[ 0.366780] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.368137] Initialise module verification
[ 0.368863] audit: initializing netlink socket (disabled)
[ 0.369587] type=2000 audit(1369951662.368:1): initialized
[ 0.393362] bounce pool size: 64 pages
[ 0.394027] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.396349] VFS: Disk quotas dquot_6.5.2
[ 0.397044] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.398206] fuse init (API version 7.20)
[ 0.398913] msgmni has been set to 1719
[ 0.399833] Key type asymmetric registered
[ 0.400072] Asymmetric key parser 'x509' registered
[ 0.401962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.403441] io scheduler noop registered
[ 0.404231] io scheduler deadline registered (default)
[ 0.404629] io scheduler cfq registered
[ 0.405419] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.406323] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.407312] ACPI: AC Adapter [AC] (on-line)
[ 0.408177] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.409372] ACPI: Power Button [PWRF]
[ 0.410039] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 0.411211] ACPI: Sleep Button [SLPF]
[ 0.413644] GHES: HEST is not enabled!
[ 0.414302] isapnp: Scanning for PnP cards...
[ 0.422499] ACPI: Battery Slot [BAT0] (battery present)
[ 0.785405] isapnp: No Plug & Play device found
[ 0.788751] Linux agpgart interface v0.103
[ 0.790657] brd: module loaded
[ 0.791834] loop: module loaded
[ 0.792066] ata_piix 0000:00:01.1: version 2.13
[ 0.793129] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.793507] scsi0 : ata_piix
[ 0.794218] scsi1 : ata_piix
[ 0.794876] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 0.795698] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 0.796942] libphy: Fixed MDIO Bus: probed
[ 0.797758] tun: Universal TUN/TAP device driver, 1.6
[ 0.798598] tun: (C) 1999-2004 Max Krasnyansky
[ 0.800143] PPP generic driver version 2.4.2
[ 0.800921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.801688] ehci-pci: EHCI PCI platform driver
[ 0.802392] ehci-pci 0000:00:0b.0: setting latency timer to 64
[ 0.802404] ehci-pci 0000:00:0b.0: EHCI Host Controller
[ 0.803145] ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 0.805146] ehci-pci 0000:00:0b.0: irq 10, io mem 0xf0805000
[ 0.816275] ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 0.817393] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.818761] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.820224] usb usb1: Product: EHCI Host Controller
[ 0.820224] usb usb1: Manufacturer: Linux 3.8.0-030800-generic ehci_hcd
[ 0.823100] usb usb1: SerialNumber: 0000:00:0b.0
[ 0.824970] hub 1-0:1.0: USB hub found
[ 0.825708] hub 1-0:1.0: 8 ports detected
[ 0.826846] ehci-platform: EHCI generic platform driver
[ 0.827634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.828089] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.828089] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.828532] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 0.829724] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
[ 0.884977] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.885766] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.887752] usb usb2: Product: OHCI Host Controller
[ 0.888626] usb usb2: Manufacturer: Linux 3.8.0-030800-generic ohci_hcd
[ 0.891327] usb usb2: SerialNumber: 0000:00:06.0
[ 0.893683] hub 2-0:1.0: USB hub found
[ 0.895231] hub 2-0:1.0: 8 ports detected
[ 0.896801] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.898140] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.439101] tsc: Refined TSC clocksource calibration: 1993.326 MHz
[ 1.439858] Switching to clocksource tsc
[ 1.440520] ata1.01: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.442777] ata1.01: configured for UDMA/33
[ 1.443996] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.444791] scsi 0:0:1:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.446318] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.447656] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.448387] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.449181] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.449502] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 1.450277] mousedev: PS/2 mouse device common for all mice
[ 1.452463] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.454431] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.455315] rtc0: alarms up to one day, 114 bytes nvram
[ 1.456042] device-mapper: uevent: version 1.0.3
[ 1.456851] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.458063] EISA: Probing bus 0 at eisa.0
[ 1.458743] Cannot allocate resource for EISA slot 4
[ 1.459474] EISA: Detected 0 cards.
[ 1.460018] cpufreq-nforce2: No nForce2 chipset.
[ 1.460646] cpuidle: using governor ladder
[ 1.461318] cpuidle: using governor menu
[ 1.461965] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.462698] EFI Variables Facility v0.08 2004-May-17
[ 1.463522] ashmem: initialized
[ 1.464266] TCP: cubic registered
[ 1.464631] NET: Registered protocol family 10
[ 1.466276] NET: Registered protocol family 17
[ 1.466982] Key type dns_resolver registered
[ 1.467806] Using IPI No-Shortcut mode
[ 1.468131] Loading module verification certificates
[ 1.472630] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e8b128d6c747d148feb8ac22260307dcdeffe9de'
[ 1.474102] registered taskstats version 1
[ 1.477052] Key type trusted registered
[ 1.479698] Key type encrypted registered
[ 1.483269] rtc_cmos rtc_cmos: setting system clock to 2013-05-30 22:07:43 UTC (1369951663)
[ 1.484335] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.485091] EDD information not available.
[ 1.485841] Freeing unused kernel memory: 788k freed
[ 1.486700] Write protecting the kernel text: 6320k
[ 1.487467] Write protecting the kernel read-only data: 2544k
[ 1.488228] NX-protecting the kernel data: 3920k
[ 1.513661] udevd[91]: starting version 175
[ 1.670475] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.671411] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.688154] e1000 0000:00:03.0: setting latency timer to 64
[ 2.095355] usb 2-1: new full-speed USB device number 2 using ohci_hcd
[ 2.139852] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:e5:ac:1e
[ 2.140526] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.141457] ahci 0000:00:0d.0: version 3.0
[ 2.142136] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 2.142929] PCI: setting IRQ 5 as level-triggered
[ 2.143054] ahci: SSS flag set, parallel bus scan disabled
[ 2.143946] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 2.144508] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 2.146438] ahci 0000:00:0d.0: setting latency timer to 64
[ 2.147713] scsi2 : ahci
[ 2.148417] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 5
[ 2.347131] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
[ 2.351274] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.354109] usb 2-1: Product: USB Tablet
[ 2.356684] usb 2-1: Manufacturer: VirtualBox
[ 2.468602] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.471593] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 2.474780] ata3.00: 20971520 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 2.477935] ata3.00: configured for UDMA/133
[ 2.482317] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 2.485901] sd 2:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
[ 2.487360] sd 2:0:0:0: [sda] Write Protect is off
[ 2.488114] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.488137] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.488570] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.492146] sda: sda1 sda2 < sda5 >
[ 2.493406] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.590851] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.860315] udevd[250]: starting version 175
[ 3.176644] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 3.181351] microcode: CPU0 sig=0x206a7, pf=0x1, revision=0x0
[ 3.188615] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.190016] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 3.194532] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3.405523] parport_pc 00:03: reported by Plug and Play ACPI
[ 4.153995] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 4.182802] ppdev: user-space parallel port driver
[ 8.089471] init: ureadahead main process (688) terminated with status 5
[ 8.142149] lp: driver loaded but no devices found
[ 8.257992] Adding 2095100k swap on /dev/sda5. Priority:-1 extents:1 across:2095100k
[ 8.286939] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.539371] init: failsafe main process (840) killed by TERM signal
[ 8.742377] type=1400 audit(1369951670.753:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=910 comm="apparmor_parser"
[ 8.742789] type=1400 audit(1369951670.753:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=910 comm="apparmor_parser"
[ 8.742996] type=1400 audit(1369951670.753:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=910 comm="apparmor_parser"
[ 8.761118] type=1400 audit(1369951670.773:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=917 comm="apparmor_parser"
[ 10.446419] init: udev-fallback-graphics main process (1206) terminated with status 1
[ 10.470619] init: plymouth-splash main process (1211) terminated with status 1
[ 10.477745] init: friendly-recovery post-stop process (680) terminated with status 1
[ 117.777596] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 125.584781] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 150.973016] gsettings[1460]: segfault at 8 ip b752ba94 sp bf9dc72c error 6 in libgio-2.0.so.0.3200.3[b7484000+153000]
[ 151.129606] gsettings[1463]: segfault at 8 ip b757ca94 sp bf9f498c error 6 in libgio-2.0.so.0.3200.3[b74d5000+153000]
[ 168.033958] gsettings[1510]: segfault at 8 ip b75bea94 sp bf9e579c error 6 in libgio-2.0.so.0.3200.3[b7517000+153000]
[ 168.112534] gsettings[1513]: segfault at 8 ip b7535a94 sp bfb00d2c error 6 in libgio-2.0.so.0.3200.3[b748e000+153000]
[ 251.958272] gsettings[1552]: segfault at 8 ip b75a5a94 sp bfb0751c error 6 in libgio-2.0.so.0.3200.3[b74fe000+153000]
[ 252.051484] gsettings[1555]: segfault at 8 ip b754aa94 sp bfe982ec error 6 in libgio-2.0.so.0.3200.3[b74a3000+153000]
[ 280.567995] gsettings[1594]: segfault at 8 ip b74e4a94 sp bff249cc error 6 in libgio-2.0.so.0.3200.3[b743d000+153000]
[ 280.665463] gsettings[1597]: segfault at 8 ip b75d9a94 sp bfd61ccc error 6 in libgio-2.0.so.0.3200.3[b7532000+153000]
[ 298.150000] gsettings[1636]: segfault at 8 ip b7509a94 sp bfe0402c error 6 in libgio-2.0.so.0.3200.3[b7462000+153000]
[ 298.228085] gsettings[1639]: segfault at 8 ip b7570a94 sp bfdba37c error 6 in libgio-2.0.so.0.3200.3[b74c9000+153000]
[ 308.548602] gsettings[1680]: segfault at 8 ip b7579a94 sp bf8662fc error 6 in libgio-2.0.so.0.3200.3[b74d2000+153000]
[ 308.628380] gsettings[1683]: segfault at 8 ip b7556a94 sp bf90bc9c error 6 in libgio-2.0.so.0.3200.3[b74af000+153000]
[ 314.292642] gsettings[1722]: segfault at 8 ip b7573a94 sp bfde2afc error 6 in libgio-2.0.so.0.3200.3[b74cc000+153000]
[ 314.377863] gsettings[1725]: segfault at 8 ip b74e6a94 sp bf81085c error 6 in libgio-2.0.so.0.3200.3[b743f000+153000]
[ 314.850791] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 374.897047] gsettings[1764]: segfault at 8 ip b7576a94 sp bfdd9cdc error 6 in libgio-2.0.so.0.3200.3[b74cf000+153000]
[ 374.979877] gsettings[1767]: segfault at 8 ip b753ea94 sp bfd2103c error 6 in libgio-2.0.so.0.3200.3[b7497000+153000]
[ 433.567743] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 541.962110] gsettings[1809]: segfault at 8 ip b756aa94 sp bfa55fcc error 6 in libgio-2.0.so.0.3200.3[b74c3000+153000]
[ 542.048701] gsettings[1812]: segfault at 8 ip b74f0a94 sp bfe5dd3c error 6 in libgio-2.0.so.0.3200.3[b7449000+153000]
[ 549.829498] gsettings[1852]: segfault at 8 ip b754ba94 sp bf8ea0cc error 6 in libgio-2.0.so.0.3200.3[b74a4000+153000]
[ 549.914442] gsettings[1855]: segfault at 8 ip b7531a94 sp bf91b8cc error 6 in libgio-2.0.so.0.3200.3[b748a000+153000]
[ 758.090553] gsettings[1897]: segfault at 8 ip b753ca94 sp bfe7d53c error 6 in libgio-2.0.so.0.3200.3[b7495000+153000]
[ 758.174432] gsettings[1900]: segfault at 8 ip b74eba94 sp bfe32f3c error 6 in libgio-2.0.so.0.3200.3[b7444000+153000]
[ 812.415912] gsettings[2359]: segfault at 8 ip b755ca94 sp bfd4295c error 6 in libgio-2.0.so.0.3200.3[b74b5000+153000]
[ 812.495848] gsettings[2362]: segfault at 8 ip b7502a94 sp bf993dfc error 6 in libgio-2.0.so.0.3200.3[b745b000+153000]
[ 907.537782] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1322.752499] gsettings[10337]: segfault at 8 ip b7563a94 sp bfa6a03c error 6 in libgio-2.0.so.0.3200.3[b74bc000+153000]
[ 1322.848539] gsettings[10340]: segfault at 8 ip b753ca94 sp bfd1fb1c error 6 in libgio-2.0.so.0.3200.3[b7495000+153000]
[ 1388.913131] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1676.726596] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1854.120783] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 2172.979092] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 2477.003862] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 2578.150867] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 3064.928757] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 3266.993877] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.