dmesg - flten-openstack-disk-test-aio
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-23-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #35~precise1-Ubuntu SMP Fri Jan 25 17:13:26 UTC 2013 (Ubuntu 3.5.0-23.35~precise1-generic 3.5.7.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffcfff] usable
BIOS-e820: [mem 0x000000001fffd000-0x000000001fffffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Bochs Bochs, BIOS Bochs 01/01/2007
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1fffd max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [ffff8800000fdae0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000095000] 95000 size 24576
init_memory_mapping: [mem 0x00000000-0x1fffcfff]
[mem 0x00000000-0x1fdfffff] page 2M
[mem 0x1fe00000-0x1fffcfff] page 4k
kernel direct mapping tables up to 0x1fffcfff @ [mem 0x1fffa000-0x1fffcfff]
RAMDISK: [mem 0x1e531000-0x1f402fff]
ACPI: RSDP 00000000000fd980 00014 (v00 BOCHS )
ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000001fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000001fffd9b0 02589 (v01 BXPC BXDSDT 00000001 INTL 20100528)
ACPI: FACS 000000001fffff40 00040
ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 000000001fffd830 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000001fffcfff]
Initmem setup node 0 [mem 0x00000000-0x1fffcfff]
NODE_DATA [mem 0x1fff6000-0x1fff9fff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1cf1901, boot clock
[ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001dc00000-ffff88001e3fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009afff]
node 0: [mem 0x00100000-0x1fffcfff]
On node 0 totalpages: 130952
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3909 pages, LIFO batch:0
DMA32 zone: 1984 pages used for memmap
DMA32 zone: 124989 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88001fc00000 s83584 r8192 d22912 u2097152
pcpu-alloc: s83584 r8192 d22912 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
kvm-clock: cpu 0, msr 0:1fc13901, primary cpu clock
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 1fc0dfc0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 128898
Policy zone: DMA32
PID hash table entries: 2048 (order: 2, 16384 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 484488k/524276k available (6828k kernel code, 468k absent, 39320k reserved, 6342k data, 948k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:256 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Detected 2992.530 MHz processor.
Calibrating delay loop (skipped) preset value.. 5985.06 BogoMIPS (lpj=11970120)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 10 MCE banks
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20120320
ftrace: allocating 27653 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Common KVM processor stepping 01
Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
Brought up 1 CPUs
Total of 1 processors activated (5985.06 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
dummy:
RTC time: 13:17:18, date: 05/28/13
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 20: [io 0xc0e0-0xc0ef]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 20: [io 0xc080-0xc09f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
pci 0000:00:02.0: reg 30: [mem 0xfebd0000-0xfebdffff pref]
pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
pci 0000:00:03.0: reg 10: [io 0xc0a0-0xc0bf]
pci 0000:00:03.0: reg 14: [mem 0xfebf1000-0xfebf1fff]
pci 0000:00:03.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
pci 0000:00:04.0: reg 10: [io 0xc000-0xc03f]
pci 0000:00:04.0: reg 14: [mem 0xfebf2000-0xfebf2fff]
pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
pci 0000:00:05.0: reg 10: [io 0xc040-0xc07f]
pci 0000:00:05.0: reg 14: [mem 0xfebf3000-0xfebf3fff]
pci 0000:00:06.0: [1af4:1002] type 00 class 0x050000
pci 0000:00:06.0: reg 10: [io 0xc0c0-0xc0df]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x1fffd000-0x1fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xe0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0071]
pnp 00:01: [irq 8]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [io 0x0060]
pnp 00:02: [io 0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: [io 0x03f2-0x03f5]
pnp 00:04: [io 0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io 0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io 0x02f8-0x02ff]
pnp 00:06: [irq 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1369747039.440:1): initialized
Trying to unpack rootfs image as initramfs...
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 946
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xfc000000, mapped to 0xffffc90000180000, using 1408k, total 1408k
efifb: mode is 800x600x24, linelength=2400, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
virtio-pci 0000:00:03.0: setting latency timer to 64
virtio-pci 0000:00:04.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
virtio-pci 0000:00:05.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
virtio-pci 0000:00:06.0: setting latency timer to 64
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X
vda: vda1 vda2 < vda5 >
virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X
vdb: unknown partition table
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 45 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 46 for MSI/MSI-X
Freeing initrd memory: 15176k freed
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-23-generic uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 13:196:282
tty tty19: hash matches
rtc_cmos 00:01: setting system clock to 2013-05-28 13:17:20 UTC (1369747040)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 948k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1352k freed
Freeing unused kernel memory: 1048k freed
udevd[85]: starting version 175
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU 1.0
usb 1-1: SerialNumber: 42
FDC 0 is a S82078B
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: QEMU 1.0 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 1.0 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
EXT4-fs (vda1): INFO: recovery required on readonly filesystem
EXT4-fs (vda1): write access will be enabled during recovery
EXT4-fs (vda1): recovery complete
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 4192252k swap on /dev/vda5. Priority:-1 extents:1 across:4192252k
EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[340]: starting version 175
lp: driver loaded but no devices found
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
type=1400 audit(1369747057.243:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=526 comm="apparmor_parser"
type=1400 audit(1369747057.255:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
type=1400 audit(1369747057.255:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1
IPv6: eth0: IPv6 duplicate address fe80::f816:3eff:feb4:1e6 detected!
init: failsafe main process (658) killed by TERM signal
microcode: Microcode Update Driver: v2.00 , Peter Oruba
type=1400 audit(1369747060.875:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=854 comm="apparmor_parser"
type=1400 audit(1369747060.875:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=854 comm="apparmor_parser"
type=1400 audit(1369747060.875:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=854 comm="apparmor_parser"
type=1400 audit(1369747061.051:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=856 comm="apparmor_parser"