dmesg - iozone-cfq-3
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000bad89fff] usable
BIOS-e820: [mem 0x00000000bad8a000-0x00000000baddbfff] ACPI NVS
BIOS-e820: [mem 0x00000000baddc000-0x00000000bae07fff] reserved
BIOS-e820: [mem 0x00000000bae08000-0x00000000bae08fff] usable
BIOS-e820: [mem 0x00000000bae09000-0x00000000bae0bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bae0c000-0x00000000bae0cfff] ACPI data
BIOS-e820: [mem 0x00000000bae0d000-0x00000000bae16fff] ACPI NVS
BIOS-e820: [mem 0x00000000bae17000-0x00000000bae3bfff] reserved
BIOS-e820: [mem 0x00000000bae3c000-0x00000000bae7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bae7f000-0x00000000baffffff] usable
BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Pro3, BIOS P1.10 04/25/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0BB800000 mask FFF800000 uncachable
3 base 0BC000000 mask FFC000000 uncachable
4 base 0C0000000 mask FC0000000 uncachable
5 base 23FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 1GB, type WB
reg 2, base: 3000MB, range: 8MB, type UC
reg 3, base: 3008MB, range: 64MB, type UC
reg 4, base: 3GB, range: 1GB, type UC
reg 5, base: 9214MB, range: 2MB, type UC
total RAM covered: 8118M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3000MB, range: 8MB, type UC
reg 3, base: 3008MB, range: 64MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 1GB, type WB
reg 6, base: 9214MB, range: 2MB, type UC
e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcf40-0x000fcf4f] mapped at [ffff8800000fcf40]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0xbaffffff]
[mem 0x00000000-0xbaffffff] page 2M
kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x23fdfffff]
[mem 0x100000000-0x23fdfffff] page 2M
kernel direct mapping tables up to 0x23fdfffff @ [mem 0xbaff6000-0xbaffffff]
RAMDISK: [mem 0x362ee000-0x3716efff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000badd4068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000baddb3c0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000badd4150 0726A (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bae0ef80 00040
ACPI: APIC 00000000baddb4b8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000baddb530 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000baddb638 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: AAFT 00000000baddb678 000D3 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 00000000baddb750 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
Initmem setup node 0 [mem 0x00000000-0x23fdfffff]
NODE_DATA [mem 0x23fdfc000-0x23fdfffff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xbad89fff]
node 0: [mem 0xbae08000-0xbae08fff]
node 0: [mem 0xbae7f000-0xbaffffff]
node 0: [mem 0x100000000-0x23fdfffff]
On node 0 totalpages: 2074777
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 744268 pages, LIFO batch:31
Normal zone: 20472 pages used for memmap
Normal zone: 1289736 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000bad8a000 - 00000000baddc000
PM: Registered nosave memory: 00000000baddc000 - 00000000bae08000
PM: Registered nosave memory: 00000000bae09000 - 00000000bae0c000
PM: Registered nosave memory: 00000000bae0c000 - 00000000bae0d000
PM: Registered nosave memory: 00000000bae0d000 - 00000000bae17000
PM: Registered nosave memory: 00000000bae17000 - 00000000bae3c000
PM: Registered nosave memory: 00000000bae3c000 - 00000000bae7f000
PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037915
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8070816k/9435136k available (6711k kernel code, 1136028k absent, 228292k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3292.586 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.17 BogoMIPS (lpj=13170344)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (26340.68 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbad8a000-0xbaddbfff] (335872 bytes)
PM: Registering ACPI NVS region [mem 0xbae09000-0xbae0bfff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0xbae0d000-0xbae16fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xbae3c000-0xbae7efff] (274432 bytes)
dummy:
RTC time: 23:47:17, date: 05/23/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bae0dc18 0038C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: SSDT 00000000bae0ee18 00084 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c8000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0xbfa00000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c8000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xbfa00000-0xffffffff]
pci 0000:00:00.0: >[8086:0100] type 00 class 0x060000
pci 0000:00:01.0: >[8086:0101] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: >[8086:0112] type 00 class 0x038000
pci 0000:00:02.0: >reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
pci 0000:00:02.0: >reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: >reg 20: [io 0xf000-0xf03f]
pci 0000:00:16.0: >[8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: >reg 10: [mem 0xfb908000-0xfb90800f 64bit]
pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: >reg 10: [mem 0xfb907000-0xfb9073ff]
pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xfb900000-0xfb903fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: >[8086:244e] type 01 class 0x060401
pci 0000:00:1c.4: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: >[8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: >[8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: >[8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: >reg 10: [mem 0xfb906000-0xfb9063ff]
pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: >[8086:1c44] type 00 class 0x060100
pci 0000:00:1f.2: >[8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: >reg 10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: >reg 14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: >reg 18: [io 0xf090-0xf097]
pci 0000:00:1f.2: >reg 1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: >reg 20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: >reg 24: [mem 0xfb905000-0xfb9057ff]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xfb904000-0xfb9040ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0xf040-0xf05f]
pci 0000:01:00.0: >[10de:1086] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: >reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: >reg 1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:01:00.0: >reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: >reg 30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.1: >[10de:0e09] type 00 class 0x040300
pci 0000:01:00.1: >reg 10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: > bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:03:00.0: >[1b21:1080] type 01 class 0x060401
pci 0000:00:1c.4: >PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1c.4: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.4: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.4: > bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
pci 0000:00:1c.4: > bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
pci 0000:03:00.0: >PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:03:00.0: > bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: > bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: > bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: > bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:03:00.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
pci 0000:05:00.0: >[10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: >reg 10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: >reg 18: [mem 0xda104000-0xda104fff 64bit pref]
pci 0000:05:00.0: >reg 20: [mem 0xda100000-0xda103fff 64bit pref]
pci 0000:05:00.0: >supports D1 D2
pci 0000:05:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: >PCI bridge to [bus 05-05]
pci 0000:00:1c.5: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: > bridge window [mem 0xda100000-0xda1fffff 64bit pref]
pci 0000:06:00.0: >[1b6f:7023] type 00 class 0x0c0330
pci 0000:06:00.0: >reg 10: [mem 0xfb800000-0xfb807fff 64bit]
pci 0000:06:00.0: >supports D1 D2
pci 0000:06:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: >PCI bridge to [bus 06-06]
pci 0000:00:1c.6: > bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.7: >PCI bridge to [bus 07-07]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x1c) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbad8a000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbae09000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c8000-0x000dffff window]
pnp 00:00: >[mem 0xbfa00000-0xffffffff window]
pnp 00:00: >[mem 0x00000000 window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[mem 0xfed10000-0xfed19fff]
pnp 00:01: >[mem 0xe0000000-0xefffffff]
pnp 00:01: >[mem 0xfed90000-0xfed93fff]
pnp 00:01: >[mem 0xfed20000-0xfed3ffff]
pnp 00:01: >[mem 0xfee00000-0xfee0ffff]
system 00:01: >[mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:01: >[mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: >[mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: >[mem 0xfee00000-0xfee0ffff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: >[io 0x0290-0x029f]
pnp 00:02: >[io 0x0000-0xffffffffffffffff disabled]
system 00:02: >[io 0x0290-0x029f] has been reserved
system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: >[dma 4]
pnp 00:03: >[io 0x0000-0x000f]
pnp 00:03: >[io 0x0081-0x0083]
pnp 00:03: >[io 0x0087]
pnp 00:03: >[io 0x0089-0x008b]
pnp 00:03: >[io 0x008f]
pnp 00:03: >[io 0x00c0-0x00df]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: >[io 0x0070-0x0071]
pnp 00:04: >[irq 8]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x0010-0x001f]
pnp 00:06: >[io 0x0022-0x003f]
pnp 00:06: >[io 0x0044-0x005f]
pnp 00:06: >[io 0x0062-0x0063]
pnp 00:06: >[io 0x0065-0x006f]
pnp 00:06: >[io 0x0072-0x007f]
pnp 00:06: >[io 0x0080]
pnp 00:06: >[io 0x0084-0x0086]
pnp 00:06: >[io 0x0088]
pnp 00:06: >[io 0x008c-0x008e]
pnp 00:06: >[io 0x0090-0x009f]
pnp 00:06: >[io 0x00a2-0x00bf]
pnp 00:06: >[io 0x00e0-0x00ef]
pnp 00:06: >[io 0x04d0-0x04d1]
system 00:06: >[io 0x04d0-0x04d1] has been reserved
system 00:06: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: >[io 0x00f0-0x00ff]
pnp 00:07: >[irq 13]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: >[io 0x03f8-0x03ff]
pnp 00:08: >[irq 4]
pnp 00:08: >[dma 0 disabled]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: >[io 0x0400-0x0453]
pnp 00:09: >[io 0x0458-0x047f]
pnp 00:09: >[io 0x1180-0x119f]
pnp 00:09: >[io 0x0500-0x057f]
pnp 00:09: >[mem 0xfed1c000-0xfed1ffff]
pnp 00:09: >[mem 0xfec00000-0xfecfffff]
pnp 00:09: >[mem 0xfed08000-0xfed08fff]
pnp 00:09: >[mem 0xff000000-0xffffffff]
system 00:09: >[io 0x0400-0x0453] has been reserved
system 00:09: >[io 0x0458-0x047f] has been reserved
system 00:09: >[io 0x1180-0x119f] has been reserved
system 00:09: >[io 0x0500-0x057f] has been reserved
system 00:09: >[mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: >[mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: >[mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: >[mem 0xff000000-0xffffffff] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: >[io 0x0454-0x0457]
system 00:0a: >[io 0x0454-0x0457] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: >[mem 0xfed00000-0xfed003ff]
pnp 00:0b: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: > bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:03:00.0: >PCI bridge to [bus 04-04]
pci 0000:00:1c.4: >PCI bridge to [bus 03-04]
pci 0000:00:1c.5: >PCI bridge to [bus 05-05]
pci 0000:00:1c.5: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: > bridge window [mem 0xda100000-0xda1fffff 64bit pref]
pci 0000:00:1c.6: >PCI bridge to [bus 06-06]
pci 0000:00:1c.6: > bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.7: >PCI bridge to [bus 07-07]
pci 0000:03:00.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000c8000-0x000dffff]
pci_bus 0000:00: >resource 8 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:01: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: >resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:03: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: >resource 7 [mem 0x000c8000-0x000dffff]
pci_bus 0000:03: >resource 8 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:04: >resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:04: >resource 9 [io 0x0d00-0xffff]
pci_bus 0000:04: >resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: >resource 11 [mem 0x000c8000-0x000dffff]
pci_bus 0000:04: >resource 12 [mem 0xbfa00000-0xffffffff]
pci_bus 0000:05: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: >resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
pci_bus 0000:06: >resource 1 [mem 0xfb800000-0xfb8fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb6d8a000-0xbad89fff] (64MB) mapped at [ffff8800b6d8a000-ffff8800bad89fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1369352836.432:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15763
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:1c.5: >irq 42 for MSI/MSI-X
pcieport 0000:00:1c.6: >irq 43 for MSI/MSI-X
pcieport 0000:00:1c.7: >irq 44 for MSI/MSI-X
pcieport 0000:00:01.0: >Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: >Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.5: >Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.6: >Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.7: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: >service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 14852k freed
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: >version 3.0
ahci 0000:00:1f.2: >irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: >flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: >setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb905000 port 0xfb905100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xfb905000 port 0xfb905180 irq 45
ata3: SATA max UDMA/133 abar m2048@0xfb905000 port 0xfb905200 irq 45
ata4: SATA max UDMA/133 abar m2048@0xfb905000 port 0xfb905280 irq 45
ata5: SATA max UDMA/133 abar m2048@0xfb905000 port 0xfb905300 irq 45
ata6: SATA max UDMA/133 abar m2048@0xfb905000 port 0xfb905380 irq 45
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: >setting latency timer to 64
ehci_hcd 0000:00:1a.0: >EHCI Host Controller
ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: >debug port 2
ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xfb907000
ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.0
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >2 ports detected
ehci_hcd 0000:00:1d.0: >setting latency timer to 64
ehci_hcd 0000:00:1d.0: >EHCI Host Controller
ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: >debug port 2
ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xfb906000
ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:06:00.0: >xHCI Host Controller
xhci_hcd 0000:06:00.0: >new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: >irq 18, io mem 0xfb800000
xhci_hcd 0000:06:00.0: >irq 46 for MSI/MSI-X
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: xHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb3: >SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
xhci_hcd 0000:06:00.0: >xHCI Host Controller
xhci_hcd 0000:06:00.0: >new USB bus registered, assigned bus number 4
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: xHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb4: >SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 13:399:808
rtc_cmos 00:04: >setting system clock to 2013-05-23 23:47:17 UTC (1369352837)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5.00: ATAPI: Optiarc DVD RW AD-5260S, 1.00, max UDMA/100
ata5.00: configured for UDMA/100
ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
ata1.00: ATA-8: OCZ-AGILITY3, 2.11, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA OCZ-AGILITY3 2.11 PQ: 0 ANSI: 5
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: >[sda] Attached SCSI disk
scsi 1:0:0:0: >Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
sd 1:0:0:0: >[sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: >[sdb] 4096-byte physical blocks
sd 1:0:0:0: >Attached scsi generic sg1 type 0
sd 1:0:0:0: >[sdb] Write Protect is off
sd 1:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: >[sdb] Attached SCSI disk
scsi 4:0:0:0: >CD-ROM Optiarc DVD RW AD-5260S 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: >Attached scsi CD-ROM sr0
sr 4:0:0:0: >Attached scsi generic sg2 type 5
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[112]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: >irq 47 for MSI/MSI-X
r8169 0000:05:00.0: >eth0: RTL8168evl/8111evl at 0xffffc90000c6e000, 00:25:22:b5:36:e5, XID 0c900800 IRQ 47
r8169 0000:05:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >6 ports detected
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: >USB hub found
hub 2-1:1.0: >8 ports detected
usb 3-2: >new full-speed USB device number 2 using xhci_hcd
Refined TSC clocksource calibration: 3292.522 MHz.
Switching to clocksource tsc
usb 3-2: >New USB device found, idVendor=043d, idProduct=00f6
usb 3-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: >Product: 3400 Series
usb 3-2: >Manufacturer: Lexmark
usb 3-2: >SerialNumber: 22P0003210X02TJ
Initializing USB Mass Storage driver...
scsi6 : usb-storage 3-2:1.2
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:043D:00F6.0001: >hiddev0,hidraw0: USB HID v1.00 Device [Lexmark 3400 Series] on usb-0000:06:00.0-2/input3
usb 1-1.3: >new full-speed USB device number 3 using ehci_hcd
usb 1-1.3: >New USB device found, idVendor=046d, idProduct=c52b
usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: >Product: USB Receiver
usb 1-1.3: >Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0004: >hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input2
input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/input/input2
logitech-djdevice 0003:046D:C52B.0005: >input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:1a.0-1.3:1
input: Logitech Unifying Device. Wireless PID:2008 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/input/input3
logitech-djdevice 0003:046D:C52B.0006: >input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2008] on usb-0000:00:1a.0-1.3:2
usb 2-1.1: >new full-speed USB device number 3 using ehci_hcd
usb 2-1.1: >New USB device found, idVendor=1532, idProduct=0016
usb 2-1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: >Product: Razer DeathAdder
usb 2-1.1: >Manufacturer: Razer
input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4
hid-generic 0003:1532:0016.0007: >input,hidraw4: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1d.0-1.1/input0
EXT3-fs (loop0): recovery required on readonly filesystem
EXT3-fs (loop0): write access will be enabled during recovery
scsi scan: INQUIRY result too short (5), using 36
scsi 6:0:0:0: >Direct-Access Lexmark USB Mass Storage 200 PQ: 0 ANSI: 0
sd 6:0:0:0: >Attached scsi generic sg3 type 0
sd 6:0:0:0: >[sdc] Attached SCSI removable disk
kjournald starting. Commit interval 5 seconds
EXT3-fs (loop0): recovery complete
EXT3-fs (loop0): mounted filesystem with ordered data mode
Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT3-fs (loop0): using internal journal
udevd[455]: starting version 175
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: >enabling device (0006 -> 0007)
i915 0000:00:02.0: >setting latency timer to 64
pci 0000:00:00.0: >Intel Sandybridge Chipset
pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: >detected 65536K stolen memory
xhci_hcd 0000:06:00.0: >ERROR: unexpected command completion code 0x11.
usb 3-2: >Not enough bandwidth for altsetting 0
usblp: can't set desired altsetting 0 on interface 1
usbcore: registered new interface driver usblp
xhci_hcd 0000:06:00.0: >ERROR: unexpected command completion code 0x11.
usb 3-2: >Not enough bandwidth for altsetting 0
wmi: Mapper loaded
lp: driver loaded but no devices found
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
i915 0000:00:02.0: >irq 48 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1369345658.500:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=683 comm="apparmor_parser"
type=1400 audit(1369345658.500:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=683 comm="apparmor_parser"
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
init: failsafe main process (742) killed by TERM signal
type=1400 audit(1369345658.636:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=886 comm="apparmor_parser"
type=1400 audit(1369345658.636:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=885 comm="apparmor_parser"
type=1400 audit(1369345658.636:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=883 comm="apparmor_parser"
type=1400 audit(1369345658.636:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=886 comm="apparmor_parser"
type=1400 audit(1369345658.640:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=885 comm="apparmor_parser"
type=1400 audit(1369345658.640:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=886 comm="apparmor_parser"
type=1400 audit(1369345658.640:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=883 comm="apparmor_parser"
type=1400 audit(1369345658.640:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=884 comm="apparmor_parser"
[drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
microcode: Microcode Update Driver: v2.00 , Peter Oruba
init: alsa-restore main process (932) terminated with status 19
No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
i915: No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
mei 0000:00:16.0: >setting latency timer to 64
mei 0000:00:16.0: >irq 49 for MSI/MSI-X
[drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c8300a1)
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \_SB_.PCI0.GFX0.TCOI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPR2 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: >irq 50 for MSI/MSI-X
[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
mei 0000:00:16.0: >wd: failed to find the client
r8169 0000:05:00.0: >eth0: link down
r8169 0000:05:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.10.27.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:01:00.0: DCB version 4.0
[drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000000
[drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00020030
[drm] nouveau 0000:01:00.0: DCB outp 02: 04011380 00000000
[drm] nouveau 0000:01:00.0: DCB outp 03: 08011382 00020030
[drm] nouveau 0000:01:00.0: DCB outp 04: 02022362 00020010
[drm] nouveau 0000:01:00.0: DCB outp 05: 048333b6 0f220010
[drm] nouveau 0000:01:00.0: DCB outp 06: 04033372 00020010
[drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:01:00.0: DCB conn 01: 00010130
[drm] nouveau 0000:01:00.0: DCB conn 02: 00002261
[drm] nouveau 0000:01:00.0: DCB conn 03: 00020346
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6A28
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x70DA
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x85AA
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x85B4
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8828
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x888D
[drm] nouveau 0000:01:00.0: 0x888D: Condition still not met after 20ms, skipping following opcodes
[TTM] Zone kernel: Available graphics memory: 4044596 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:01:00.0: Detected 1280MiB VRAM (GDDR5)
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: 0 available performance level(s)
[drm] nouveau 0000:01:00.0: c: core 50MHz shader 101MHz memory 135MHz voltage 913mV fanspeed 40%
[drm] nouveau 0000:01:00.0: MM: using COPY0 for buffer copies
xhci_hcd 0000:06:00.0: >ERROR: unexpected command completion code 0x11.
usb 3-2: >Not enough bandwidth for altsetting 0
xhci_hcd 0000:06:00.0: >ERROR: unexpected command completion code 0x11.
usb 3-2: >Not enough bandwidth for altsetting 0
[drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x120000, bo ffff8801e59b2800
fbcon: nouveaufb (fb1) is primary device
fbcon: Remapping primary device, fb1, to tty 1-63
fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 1
hda_intel: Disabling MSI
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
r8169 0000:05:00.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] nouveau 0000:01:00.0: 906e not supported yet
postgres (1250): /proc/1250/oom_adj is deprecated, please use /proc/1250/oom_score_adj instead.
init: plymouth-stop pre-start process (1707) terminated with status 1
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:01:00.0: PMFB1_SUBP0: 0x037f0040
[drm] nouveau 0000:01:00.0: PMFB1_SUBP1: 0x037f0000
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000
[drm] nouveau 0000:01:00.0: PFIFO: unknown status 0x40000000