dmesg - everything
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-28-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #48~precise1-Ubuntu SMP Wed Apr 24 21:42:24 UTC 2013 (Ubuntu 3.5.0-28.48~precise1-generic 3.5.7.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cffbffff] usable
BIOS-e820: [mem 0x00000000cffc0000-0x00000000cffcdfff] ACPI data
BIOS-e820: [mem 0x00000000cffce000-0x00000000cffeffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffdfff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7376/K9A2 Platinum (MS-7376), BIOS V1.B0 06/21/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcffc0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcffbffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcffbffff] page 4k
kernel direct mapping tables up to 0xcffbffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22fffffff]
[mem 0x100000000-0x1ffffffff] page 1G
[mem 0x200000000-0x22fffffff] page 2M
kernel direct mapping tables up to 0x22fffffff @ [mem 0xcffbe000-0xcffbffff]
RAMDISK: [mem 0x36220000-0x37107fff]
ACPI: RSDP 00000000000fa940 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cffc0000 0003C (v01 062110 RSDT1332 20100621 MSFT 00000097)
ACPI: FACP 00000000cffc0200 00084 (v02 062110 FACP1332 20100621 MSFT 00000097)
ACPI: DSDT 00000000cffc0450 06F14 (v01 1ADNC 1ADNC001 00000001 INTL 20051117)
ACPI: FACS 00000000cffce000 00040
ACPI: APIC 00000000cffc0390 0007C (v01 062110 APIC1332 20100621 MSFT 00000097)
ACPI: MCFG 00000000cffc0410 0003C (v01 062110 OEMMCFG 20100621 MSFT 00000097)
ACPI: OEMB 00000000cffce040 00071 (v01 062110 OEMB1332 20100621 MSFT 00000097)
ACPI: SRAT 00000000cffc7370 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 00000000cffc7460 00038 (v01 062110 OEMHPET 20100621 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x22fffffff] -> [mem 0x00000000-0x22fffffff]
Initmem setup node 0 [mem 0x00000000-0x22fffffff]
NODE_DATA [mem 0x22fffc000-0x22fffffff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xcffbffff]
node 0: [mem 0x100000000-0x22fffffff]
On node 0 totalpages: 2096975
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 831488 pages, LIFO batch:31
Normal zone: 19456 pages used for memmap
Normal zone: 1225728 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000cffc0000 - 00000000cffce000
PM: Registered nosave memory: 00000000cffce000 - 00000000cfff0000
PM: Registered nosave memory: 00000000cfff0000 - 00000000cfffe000
PM: Registered nosave memory: 00000000cfffe000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
e820: [mem 0xcfffe000-0xffefffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061129
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ 91a0000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 8093440k/9175040k available (6820k kernel code, 787140k absent, 294460k reserved, 6347k data, 948k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using HPET reference calibration
Detected 2600.138 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.27 BogoMIPS (lpj=10400552)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
ACPI: Core revision 20120320
ftrace: allocating 27621 entries in 108 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (20801.10 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcffce000-0xcffeffff] (139264 bytes)
dummy:
RTC time: 14:13:12, date: 05/18/13
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
Trying to unpack rootfs image as initramfs...
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
TOM2: 0000000230000000 aka 8960M
bus: [00, 07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0x230000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5956] type 00 class 0x060000
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1002:597b] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1002:597e] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
pci 0000:00:12.0: reg 10: [io 0x9000-0x9007]
pci 0000:00:12.0: reg 14: [io 0x8000-0x8003]
pci 0000:00:12.0: reg 18: [io 0x7000-0x7007]
pci 0000:00:12.0: reg 1c: [io 0x6000-0x6003]
pci 0000:00:12.0: reg 20: [io 0x5000-0x500f]
pci 0000:00:12.0: reg 24: [mem 0xf9fff800-0xf9fffbff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xf9ffe000-0xf9ffefff]
pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
pci 0000:00:13.1: reg 10: [mem 0xf9ffd000-0xf9ffdfff]
pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
pci 0000:00:13.2: reg 10: [mem 0xf9ffc000-0xf9ffcfff]
pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
pci 0000:00:13.3: reg 10: [mem 0xf9ffb000-0xf9ffbfff]
pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
pci 0000:00:13.4: reg 10: [mem 0xf9ffa000-0xf9ffafff]
pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
pci 0000:00:13.5: reg 10: [mem 0xf9fff000-0xf9fff0ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xf9ff4000-0xf9ff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:05e1] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xa800-0xa87f]
pci 0000:01:00.0: reg 30: [mem 0xfe880000-0xfe8fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe8fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xb800-0xb8ff]
pci 0000:02:00.0: reg 18: [mem 0xfe9ff000-0xfe9fffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [105a:3f20] type 00 class 0x010400
pci 0000:03:00.0: reg 10: [io 0xc800-0xc87f]
pci 0000:03:00.0: reg 18: [io 0xc400-0xc4ff]
pci 0000:03:00.0: reg 1c: [mem 0xfeaff000-0xfeafffff]
pci 0000:03:00.0: reg 20: [mem 0xfeac0000-0xfeadffff]
pci 0000:03:00.0: reg 24: [mem 0xfeafc000-0xfeafdfff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: PCI bridge to [bus 03-03]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:04:00.0: [1106:3044] type 00 class 0x0c0010
pci 0000:04:00.0: reg 10: [mem 0xfebff800-0xfebfffff]
pci 0000:04:00.0: reg 14: [io 0xe800-0xe87f]
pci 0000:04:00.0: supports D2
pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
pci 0000:04:03.0: [1095:3114] type 00 class 0x010400
pci 0000:04:03.0: reg 10: [io 0xe400-0xe407]
pci 0000:04:03.0: reg 14: [io 0xe000-0xe003]
pci 0000:04:03.0: reg 18: [io 0xd800-0xd807]
pci 0000:04:03.0: reg 1c: [io 0xd400-0xd403]
pci 0000:04:03.0: reg 20: [io 0xd000-0xd00f]
pci 0000:04:03.0: reg 24: [mem 0xfebff400-0xfebff7ff]
pci 0000:04:03.0: reg 30: [mem 0xfeb00000-0xfeb7ffff pref]
pci 0000:04:03.0: supports D1 D2
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xd000-0xefff]
pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcffc0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io 0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io 0x03f0-0x03f5]
pnp 00:06: [io 0x03f7]
pnp 00:06: [irq 6]
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: [mem 0xfec00000-0xfec00fff]
pnp 00:08: [mem 0xfee00000-0xfee00fff]
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00b1]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: [io 0x040b]
pnp 00:09: [io 0x04d6]
pnp 00:09: [io 0x0c00-0x0c01]
pnp 00:09: [io 0x0c14]
pnp 00:09: [io 0x0c50-0x0c51]
pnp 00:09: [io 0x0c52]
pnp 00:09: [io 0x0c6c]
pnp 00:09: [io 0x0c6f]
pnp 00:09: [io 0x0cd0-0x0cd1]
pnp 00:09: [io 0x0cd2-0x0cd3]
pnp 00:09: [io 0x0cd4-0x0cd5]
pnp 00:09: [io 0x0cd6-0x0cd7]
pnp 00:09: [io 0x0cd8-0x0cdf]
pnp 00:09: [io 0x0800-0x089f]
pnp 00:09: [io 0x0b10-0x0b1f]
pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io 0x0900-0x090f]
pnp 00:09: [io 0x0910-0x091f]
pnp 00:09: [io 0xfe00-0xfefe]
pnp 00:09: [mem 0xffb80000-0xffbfffff]
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x040b] has been reserved
system 00:09: [io 0x04d6] has been reserved
system 00:09: [io 0x0c00-0x0c01] has been reserved
system 00:09: [io 0x0c14] has been reserved
system 00:09: [io 0x0c50-0x0c51] has been reserved
system 00:09: [io 0x0c52] has been reserved
system 00:09: [io 0x0c6c] has been reserved
system 00:09: [io 0x0c6f] has been reserved
system 00:09: [io 0x0cd0-0x0cd1] has been reserved
system 00:09: [io 0x0cd2-0x0cd3] has been reserved
system 00:09: [io 0x0cd4-0x0cd5] has been reserved
system 00:09: [io 0x0cd6-0x0cd7] has been reserved
system 00:09: [io 0x0cd8-0x0cdf] has been reserved
system 00:09: [io 0x0800-0x089f] has been reserved
system 00:09: [io 0x0b10-0x0b1f] has been reserved
system 00:09: [io 0x0900-0x090f] has been reserved
system 00:09: [io 0x0910-0x091f] has been reserved
system 00:09: [io 0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x0600-0x06df]
pnp 00:0a: [io 0x0ae0-0x0aef]
system 00:0a: [io 0x0600-0x06df] has been reserved
system 00:0a: [io 0x0ae0-0x0aef] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0xcfffffff]
pnp 00:0c: [mem 0xfec00000-0xffffffff]
pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x00100000-0xcfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe8fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:09.0: PCI bridge to [bus 03-03]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io 0xd000-0xefff]
pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
Freeing initrd memory: 15264k freed
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x00000007)
audit: initializing netlink socket (disabled)
type=2000 audit(1368886392.612:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15966
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: duty_cycle spans bit 4
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
pata_acpi 0000:00:14.1: setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xf9fff000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-28-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xf9ffe000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-28-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xf9ffd000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-28-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xf9ffc000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-28-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xf9ffb000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.0-28-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xf9ffa000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.5.0-28-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 13:996:232
rtc_cmos 00:02: setting system clock to 2013-05-18 14:13:13 UTC (1368886393)
powernow-k8: Found 1 AMD Phenom(tm) 9950 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 948k freed
usb 1-6: new high-speed USB device number 2 using ehci_hcd
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1360k freed
Freeing unused kernel memory: 1064k freed
udevd[97]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 43 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000c0e000, 00:21:85:16:4f:7c, XID 18000000 IRQ 43
r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: MSI K9A2 Platinum: enabling 64bit DMA
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fff900 irq 22
ata2: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fffa80 irq 22
ahci 0000:03:00.0: PDC42819 can only drive SATA devices with this driver
ahci 0000:03:00.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
ahci 0000:03:00.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata5: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc100 irq 17
ata6: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc180 irq 17
ata7: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc200 irq 17
ata8: SATA max UDMA/133 abar m8192@0xfeafc000 port 0xfeafc280 irq 17
scsi8 : pata_atiixp
scsi9 : pata_atiixp
ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
Floppy drive(s): fd0 is 1.44M
sata_sil 0000:04:03.0: version 2.4
sata_sil 0000:04:03.0: Applying R_ERR on DMA activate FIS errata fix
scsi10 : sata_sil
scsi11 : sata_sil
scsi12 : sata_sil
scsi13 : sata_sil
ata11: SATA max UDMA/100 mmio m1024@0xfebff400 tf 0xfebff480 irq 21
ata12: SATA max UDMA/100 mmio m1024@0xfebff400 tf 0xfebff4c0 irq 21
ata13: SATA max UDMA/100 mmio m1024@0xfebff400 tf 0xfebff680 irq 21
ata14: SATA max UDMA/100 mmio m1024@0xfebff400 tf 0xfebff6c0 irq 21
FDC 0 is a post-1991 82077
usb 1-6: New USB device found, idVendor=058f, idProduct=6362
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Mass Storage Device
usb 1-6: Manufacturer: Generic
usb 1-6: SerialNumber: 058F63626376
Initializing USB Mass Storage driver...
scsi14 : usb-storage 1-6:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 310)
usb 6-1: new low-speed USB device number 2 using ohci_hcd
ata4: softreset failed (device not ready)
ata4: applying PMP SRST workaround and retrying
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
Refined TSC clocksource calibration: 2600.182 MHz.
Switching to clocksource tsc
usb 6-1: New USB device found, idVendor=0a81, idProduct=0101
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB Keyboard
usb 6-1: Manufacturer: CHESEN
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATAPI: ATAPI iHAS220 6, 8L07, max UDMA/100
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/100
ata1.00: ATA-7: WDC WD3200AAKS-75SBA0, 12.01B01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 12.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM ATAPI iHAS220 6 8L07 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usb 6-2: new low-speed USB device number 3 using ohci_hcd
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 6-2: New USB device found, idVendor=046d, idProduct=c00e
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: USB-PS/2 Optical Mouse
usb 6-2: Manufacturer: Logitech
scsi 14:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 14:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 14:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
scsi 14:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 14:0:0:0: Attached scsi generic sg2 type 0
sd 14:0:0:1: Attached scsi generic sg3 type 0
sd 14:0:0:2: Attached scsi generic sg4 type 0
sd 14:0:0:3: Attached scsi generic sg5 type 0
sd 14:0:0:0: [sdb] Attached SCSI removable disk
sd 14:0:0:1: [sdc] Attached SCSI removable disk
sd 14:0:0:2: [sdd] Attached SCSI removable disk
sd 14:0:0:3: [sde] Attached SCSI removable disk
ata12: SATA link down (SStatus 0 SControl 310)
ata13: SATA link down (SStatus 0 SControl 310)
ata14: SATA link down (SStatus 0 SControl 310)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata1.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
ata1.00: irq_stat 0x08000000, interface fatal error
ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/88:00:30:9c:08/00:00:09:00:00/40 tag 0 ncq 69632 in
res 40/00:04:30:9c:08/00:00:09:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1: hard resetting link
firewire_core 0000:04:00.0: created device fw0: GUID 00dc100001642b8d, S400
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
ata1.00: irq_stat 0x08000000, interface fatal error
ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/80:00:00:7e:21/00:00:00:00:00/40 tag 0 ncq 65536 in
res 40/00:04:00:7e:21/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x50 SAct 0x7fffffff SErr 0x680900 action 0x6 frozen
ata1.00: irq_stat 0x08000000, interface fatal error
ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:00:b8:b0:10/00:00:00:00:00/40 tag 0 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/18:08:30:64:06/00:00:00:00:00/40 tag 1 ncq 12288 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:10:b0:b1:10/00:00:00:00:00/40 tag 2 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:18:f0:33:06/00:00:00:00:00/40 tag 3 ncq 4096 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/10:20:a0:16:05/00:00:00:00:00/40 tag 4 ncq 8192 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/a0:28:00:48:10/00:00:00:00:00/40 tag 5 ncq 81920 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:30:00:c3:08/00:00:00:00:00/40 tag 6 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:38:80:3e:0c/00:00:00:00:00/40 tag 7 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:40:98:b4:10/00:00:00:00:00/40 tag 8 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:48:a0:b3:10/00:00:00:00:00/40 tag 9 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:50:f8:c3:08/00:00:00:00:00/40 tag 10 ncq 4096 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/40:58:80:50:10/00:00:00:00:00/40 tag 11 ncq 32768 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:60:a8:b2:10/00:00:00:00:00/40 tag 12 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/88:68:78:3f:0c/00:00:00:00:00/40 tag 13 ncq 69632 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/28:70:90:b5:10/00:00:00:00:00/40 tag 14 ncq 20480 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:78:80:f2:10/00:00:00:00:00/40 tag 15 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:80:78:f3:10/00:00:00:00:00/40 tag 16 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:88:d0:ad:10/00:00:00:00:00/40 tag 17 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:90:c8:ae:10/00:00:00:00:00/40 tag 18 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:98:d8:ac:10/00:00:00:00:00/40 tag 19 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:a0:38:c6:05/00:00:00:00:00/40 tag 20 ncq 4096 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/10:a8:50:c6:05/00:00:00:00:00/40 tag 21 ncq 8192 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:b0:68:c6:05/00:00:00:00:00/40 tag 22 ncq 4096 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/10:b8:80:c6:05/00:00:00:00:00/40 tag 23 ncq 8192 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/18:c0:a0:c6:05/00:00:00:00:00/40 tag 24 ncq 12288 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:c8:d0:20:06/00:00:00:00:00/40 tag 25 ncq 4096 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:d0:f8:e3:06/00:00:00:00:00/40 tag 26 ncq 4096 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/d8:d8:28:a4:07/00:00:00:00:00/40 tag 27 ncq 110592 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/e8:e0:38:16:08/00:00:00:00:00/40 tag 28 ncq 118784 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/88:e8:30:21:08/00:00:00:00:00/40 tag 29 ncq 69632 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:f0:c0:af:10/00:00:00:00:00/40 tag 30 ncq 126976 in
res 40/00:84:78:f3:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
ata1: limiting SATA link speed to 1.5 Gbps
ata1.00: exception Emask 0x50 SAct 0x7fffffff SErr 0x680900 action 0x6 frozen
ata1.00: irq_stat 0x08000000, interface fatal error
ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:00:c0:af:10/00:00:00:00:00/40 tag 0 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:08:c8:4e:12/00:00:00:00:00/40 tag 1 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:10:c8:ce:15/00:00:00:00:00/40 tag 2 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/d8:18:28:a4:07/00:00:00:00:00/40 tag 3 ncq 110592 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:20:48:e3:13/00:00:00:00:00/40 tag 4 ncq 4096 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:28:00:c8:15/00:00:00:00:00/40 tag 5 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/a0:30:c0:74:11/00:00:00:00:00/40 tag 6 ncq 81920 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:38:f8:70:11/00:00:00:00:00/40 tag 7 ncq 4096 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:40:00:70:11/00:00:00:00:00/40 tag 8 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:48:f0:c9:15/00:00:00:00:00/40 tag 9 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:50:f8:c8:15/00:00:00:00:00/40 tag 10 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:58:d8:ac:10/00:00:00:00:00/40 tag 11 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:60:c8:ae:10/00:00:00:00:00/40 tag 12 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:68:d0:ad:10/00:00:00:00:00/40 tag 13 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:70:d0:cd:15/00:00:00:00:00/40 tag 14 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:78:d8:cc:15/00:00:00:00:00/40 tag 15 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:80:b8:d0:15/00:00:00:00:00/40 tag 16 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:88:d0:4d:12/00:00:00:00:00/40 tag 17 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:90:a8:b2:10/00:00:00:00:00/40 tag 18 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/40:98:80:50:10/00:00:00:00:00/40 tag 19 ncq 32768 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:a0:f8:c3:08/00:00:00:00:00/40 tag 20 ncq 4096 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:a8:a0:b3:10/00:00:00:00:00/40 tag 21 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:b0:98:b4:10/00:00:00:00:00/40 tag 22 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:b8:b0:d1:15/00:00:00:00:00/40 tag 23 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:c0:00:c3:08/00:00:00:00:00/40 tag 24 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:c8:e0:cb:15/00:00:00:00:00/40 tag 25 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:d0:e8:ca:15/00:00:00:00:00/40 tag 26 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/d0:d8:c0:4f:12/00:00:00:00:00/40 tag 27 ncq 106496 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:e0:b0:b1:10/00:00:00:00:00/40 tag 28 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:e8:c0:cf:15/00:00:00:00:00/40 tag 29 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/f8:f0:b8:b0:10/00:00:00:00:00/40 tag 30 ncq 126976 in
res 40/00:bc:b0:d1:15/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
Adding 8387580k swap on /dev/sda5. Priority:-1 extents:1 across:8387580k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[359]: starting version 175
lp: driver loaded but no devices found
microcode: CPU0: patch_level=0x01000095
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
MCE: In-kernel MCE decoding enabled.
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xfec000f0 already in use
wmi: Mapper loaded
EDAC MC: Ver: 2.1.0
type=1400 audit(1368886411.327:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=401 comm="apparmor_parser"
type=1400 audit(1368886411.327:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=401 comm="apparmor_parser"
type=1400 audit(1368886411.327:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=401 comm="apparmor_parser"
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
microcode: CPU1: patch_level=0x01000095
microcode: CPU2: patch_level=0x01000095
microcode: CPU3: patch_level=0x01000095
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:13.4/usb6/6-1/6-1:1.0/input/input2
hid-generic 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:13.4-1/input0
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:13.4/usb6/6-1/6-1:1.1/input/input3
hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:13.4-1/input1
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input4
hid-generic 0003:046D:C00E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.4-2/input0
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (846) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90011f00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
type=1400 audit(1368886411.827:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=955 comm="apparmor_parser"
type=1400 audit(1368886411.827:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=955 comm="apparmor_parser"
type=1400 audit(1368886411.827:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=955 comm="apparmor_parser"
type=1400 audit(1368886411.831:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=954 comm="apparmor_parser"
type=1400 audit(1368886411.831:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=960 comm="apparmor_parser"
type=1400 audit(1368886411.831:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=960 comm="apparmor_parser"
type=1400 audit(1368886411.835:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=965 comm="apparmor_parser"
ppdev: user-space parallel port driver
r8169 0000:02:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
r8169 0000:02:00.0: eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 36 callbacks suppressed
type=1400 audit(1368886430.047:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1949 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
type=1400 audit(1368886718.242:25): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=981 comm="cupsd" pid=981 comm="cupsd" capability=36 capname="block_suspend"
Broke affinity for irq 16
CPU 1 is now offline
Broke affinity for irq 18
CPU 2 is now offline
CPU 3 is now offline
SMP alternatives: switching to UP code
SMP alternatives: switching to SMP code
Booting Node 0 Processor 1 APIC 0x1
LVT offset 1 assigned for vector 0x400
Booting Node 0 Processor 2 APIC 0x2
Booting Node 0 Processor 3 APIC 0x3
udevadm: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.
sd 14:0:0:1: [sdc] 250880 512-byte logical blocks: (128 MB/122 MiB)
sd 14:0:0:1: [sdc] No Caching mode page present
sd 14:0:0:1: [sdc] Assuming drive cache: write through
sd 14:0:0:1: [sdc] No Caching mode page present
sd 14:0:0:1: [sdc] Assuming drive cache: write through
sdc: sdc1
type=1400 audit(1368887250.458:26): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=981 comm="cupsd" pid=981 comm="cupsd" capability=36 capname="block_suspend"
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
usb 1-8: new high-speed USB device number 5 using ehci_hcd
usb 1-8: New USB device found, idVendor=058f, idProduct=6387
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: Mass Storage
usb 1-8: Manufacturer: Generic
usb 1-8: SerialNumber: 91008971
scsi15 : usb-storage 1-8:1.0
scsi 15:0:0:0: Direct-Access Generic Flash Disk 8.08 PQ: 0 ANSI: 4
scsi 15:0:0:1: Direct-Access Generic Flash Disk 8.09 PQ: 0 ANSI: 4
sd 15:0:0:0: Attached scsi generic sg6 type 0
sd 15:0:0:1: Attached scsi generic sg7 type 0
sd 15:0:0:0: [sdf] 1913472 512-byte logical blocks: (979 MB/934 MiB)
sd 15:0:0:1: [sdg] 99712 512-byte logical blocks: (51.0 MB/48.6 MiB)
sd 15:0:0:0: [sdf] Write Protect is off
sd 15:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 15:0:0:1: [sdg] Write Protect is on
sd 15:0:0:1: [sdg] Mode Sense: 23 00 80 00
sd 15:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 15:0:0:1: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sdg: sdg1
sd 15:0:0:1: [sdg] Attached SCSI removable disk
sd 15:0:0:0: [sdf] Attached SCSI removable disk
usb 1-8: USB disconnect, device number 5
type=1400 audit(1368889231.566:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=981 comm="cupsd" pid=981 comm="cupsd" capability=36 capname="block_suspend"