dmesg - CubieBench
Initializing cgroup subsys cpuset
Linux version 3.0.62 (amery@builder) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #8 PREEMPT Sat Feb 16 20:53:23 UTC 2013
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun4i
Memory cut off:
MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
Ignoring unrecognised tag 0x00000000
Memory Reserved:
SYS : 0x43000000 - 0x4300ffff ( 64 kB)
VE : 0x44000000 - 0x48ffffff ( 80 MB)
G2D : 0x58000000 - 0x58ffffff ( 16 MB)
LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
Memory policy: ECC disabled, Data cache writeback
BROM Ver: 1100 1100 1623
chip-id: A10 (AW1623 revision C)
On node 0 totalpages: 245760
free_area_init_node: node 0, pgdat c07ff7f8, node_mem_map c08c5000
Normal zone: 1280 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 146176 pages, LIFO batch:31
HighMem zone: 768 pages used for memmap
HighMem zone: 97536 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 448MB 512MB = 960MB total
Memory: 834400k/834400k available, 148640k reserved, 393216K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc0032000 ( 168 kB)
.text : 0xc0032000 - 0xc07bb000 (7716 kB)
.data : 0xc07bc000 - 0xc08089b8 ( 307 kB)
.bss : 0xc08089dc - 0xc08c4798 ( 752 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:96 nr_irqs:96 96
timer0: Periodic Mode
Console: colour dummy device 80x30
Calibrating delay loop... 383.38 BogoMIPS (lpj=1916928)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
hw-breakpoint: debug architecture 0x4 unsupported.
SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
Initialize DMAC OK
bio: create slab at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Init eGon pin module V2.0
Switching to clocksource aw 64bits couter
Switched to NOHz mode on CPU #0
cfg80211: Calling CRDA to update world regulatory domain
FS-Cache: Loaded
CacheFiles: Loaded
[usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
[sw_hcd0]: usb host driver initialize........
[sw_hcd0]: open_usb_clock
[sw_hcd0]: host_init_state = 0
[sw_hcd0]: platform is usb host
[sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
[sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
wrn: hcd is not enable, need not start hcd
[sw_hcd0]: sw_usb_host0_disable start
-------sw_hcd0_soft_disconnect---------
[sw_hcd_host0]: Set USB Power OFF
wrn: hcd is not enable, need not stop hcd
[sw_hcd0]: close_usb_clock
[sw_hcd0]: sw_usb_host0_disable end
[sw_udc]: udc_init: version 20080411
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PMU: registered new PMU device of type 0
[pm]aw_pm_init!
audit: initializing netlink socket (disabled)
type=2000 audit(0.379:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.16)
msgmni has been set to 861
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi disp driver loaded (/dev/disp api 1.0)
serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
console [ttyS0] enabled
[uart]: used uart info.: 0x05
serial probe 0 irq 1 mapbase 0x01c28000
sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
serial probe 2 irq 3 mapbase 0x01c28800
sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
G2D: drv_g2d_init
G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
G2D: head:d8000000,tail:d9000000
G2D: Module initialized.major:251
brd: module loaded
loop: module loaded
[NAND]nand driver, init.
cmu_clk is 480
nand clk init end
offset 0xc: 0x6140
offset 0x14: 0x8200000b
[NAND] nand gpio_request
[NAND] nand driver version: 0x2 0x9
nand interrupte register ok
ret of NFC_ChangMode is 0
dma_hdle is 0
dma_hdle is 10000008
cmu_clk is 480
nand clk init end
offset 0xc: 0x6140
offset 0x14: 0x82000007
The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 7979008
The 1 disk name = bootloader, type = 0, class name = DISK, disk size = 32768
The 2 disk name = env, type = 0, class name = DISK, disk size = 32768
The 3 disk name = boot, type = 0, class name = DISK, disk size = 65536
The 4 disk name = system, type = 1, class name = DISK, disk size = 655360
The 5 disk name = data, type = 1, class name = DISK, disk size = 1048576
The 6 disk name = misc, type = 0, class name = DISK, disk size = 32768
The 7 disk name = recovery, type = 0, class name = DISK, disk size = 65536
The 8 disk name = cache, type = 1, class name = DISK, disk size = 262144
The 9 disk name = private, type = 0, class name = DISK, disk size = 32768
The 10 disk name = sysrecovery, type = 0, class name = DISK, disk size = 655360
The 11 disk name = UDISK, type = 0, class name = DISK, disk size = 4816896
The 11 disk size = 5062656
part total count = 12
nand: unknown partition table
nanda:
nandb: unknown partition table
nandc: unknown partition table
nandd: unknown partition table
nande: unknown partition table
nandf: unknown partition table
nandg: unknown partition table
nandh: unknown partition table
nandi:
nandj: unknown partition table
nandk:
benn: nand probe enter
[NAND]nand driver, ok.
[EMAC] ahb clk enable
[EMAC] ahb gate clk: 0x26140
emac MAC isn't valid!
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
ehci_irq: port change detect
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
[sw-ohci1]: open clock
sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
[sw-ehci2]: open clock
[sw-ehci2]: Set USB Power ON
sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
ehci_irq: port change detect
insmod_device_driver
[sw_udc]: sw_usb_device_enable start
[sw_udc]: usb_vbase = 0xf1c13000
[sw_udc]: sram_vbase = 0xf1c00000
The port change to OHCI now!
[sw_udc]: open_usb_clock
sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
ehci_irq: port change detect
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
[sw-ohci2]: open clock
udc->driver is null, udc is need not stop
[sw_udc]: sw_usb_device_enable end
sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
usb 3-1: new low speed USB device number 2 using sw-ohci
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
mousedev: PS/2 mouse device common for all mice
sunxi RTC version 0.1
sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380248073
[RTC] ERR: Set LOSC to external failed!!!
[RTC] WARNING: Rtc time will be wrong!!
using rtc device, rtc, for alarms
sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
i2c /dev entries driver
!!! base_Addr = 0xe88d2c00
config i2c gpio with gpio_config api
twi0, apb clock = 24000000
axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
I2C: i2c-0: AW16XX I2C adapter
**********start************
0x40
0xf8
0x28
0x0
0x0
**********end************
!!! base_Addr = 0xe88d4000
twi1, apb clock = 24000000
I2C: i2c-1: AW16XX I2C adapter
**********start************
0x40
0xf8
0x58
0x0
0x0
**********end************
!!! base_Addr = 0xe88d6400
twi2, apb clock = 24000000
I2C: i2c-2: AW16XX I2C adapter
**********start************
0x40
usb 4-1: new high speed USB device number 2 using sw-ehci
0xf8
0x58
0x0
0x0
**********end************
lirc_dev: IR Remote Control driver registered, major 250
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
[cedar dev]: install start!!!
[cedar dev]: install end!!!
[ace_drv] start!!!
[ace_drv] init end!!!
[pa_drv] start!!!
[pa_drv] init end!!!
print_constraints: axp20_ldo1: 1300 mV
print_constraints: axp20_ldo2: 1800 3300 mV at 3000 mV
print_constraints: axp20_ldo3: 700 3500 mV at 2800 mV
print_constraints: axp20_ldo4: 1250 3300 mV at 2800 mV
print_constraints: axp20_buck2: 700 2275 mV at 1400 mV
print_constraints: axp20_buck3: 700 3500 mV at 1250 mV
print_constraints: axp20_ldoio0: 1800 3300 mV at 2800 mV
input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
cpuidle: using governor ladder
cpuidle: using governor menu
[mmc_pm]: no sdio card used in configuration
[mmc]: sunximmc_init
[mmc]: sunxi mmc controller using config : 0xb
[mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[mmc]: mmc 0 power off !!
[mmc]: mmc0 Probe: base:0xe88de000 irq:32 dma:0 pdes:0xe7bfc000, ret 0.
[mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
[mmc]: mmc 1 power off !!
[mmc]: mmc1 Probe: base:0xe88e0000 irq:33 dma:0 pdes:0xe7004000, ret 0.
[mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
[mmc]: mmc 3 power off !!
[mmc]: mmc3 Probe: base:0xe88e2000 irq:35 dma:0 pdes:0xe7008000, ret 0.
sunxi_leds driver init
Registered led device: green:ph20:led1
Registered led device: blue:ph21:led2
input: CHICONY HP Basic USB Keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.0/input/input1
generic-usb 0003:03F0:0024.0001: input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-sw-ohci-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
enter sun4i Audio codec!!!
sun4i audio support initialized
sun4i Audio codec successfully loaded..
asoc: sndhdmi sun4i-hdmiaudio.0 mapping ok
ALSA device list:
#0: sun4i-CODEC Audio Codec
#1: sun4i-sndhdmi
IPv4 over IPv4 tunneling driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
802.1Q VLAN Support v1.8
[mmc_pm]: No sdio card, please check your config !!
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Registering SWP/SWPB emulation handler
registered taskstats version 1
ParseEDID
DDC_Init
EDID ready
DDC_Read
Sink : EDID bank 0:
0 1 2 3 4 5 6 7 8 9 A B C D E F
===============================================================================================
00 ff ff ff ff ff ff 00 4c 2d cd 05 34 32 52 4c
04 14 01 03 80 10 09 78 2a 60 41 a6 56 4a 9c 25
12 50 54 23 08 00 a9 40 81 80 81 40 81 00 95 00
b3 00 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
45 00 a0 5a 00 00 00 1e 01 1d 00 72 51 d0 1e 20
6e 28 55 00 a0 5a 00 00 00 1e 00 00 00 fd 00 32
3c 1e 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
00 53 79 6e 63 4d 61 73 74 65 72 0a 20 20 01 9d
===============================================================================================
EDID version: 1.3
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
Using above mode as preferred EDID mode
PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
DDC_Read
Sink : EDID bank 1:
0 1 2 3 4 5 6 7 8 9 A B C D E F
===============================================================================================
02 03 1c f1 48 90 04 1f 05 14 13 03 12 23 09 07
07 83 01 00 00 66 03 0c 00 10 00 80 01 1d 80 d0
72 1c 16 20 10 2c 25 80 a0 5a 00 00 00 9e 01 1d
80 18 71 1c 16 20 58 2c 25 00 a0 5a 00 00 00 9e
01 1d 00 bc 52 d0 1e 20 b8 28 55 40 a0 5a 00 00
00 1e 8c 0a d0 90 20 40 31 20 0c 40 55 00 a0 5a
[mmc]: mmc 0 detect change, present 1
00 00 00 18 8c 0a d0 8a 20 e0 2d 10 10 3e 96 00
a0 5a 00 00 00 18 00 00 00 00 00 00 00 00 00 46
===============================================================================================
Parse_VideoData_Block: VIC 16 (native) support
Parse_VideoData_Block: VIC 4 support
Parse_VideoData_Block: VIC 31 support
Parse_VideoData_Block: VIC 5 support
Parse_VideoData_Block: VIC 20 support
Parse_VideoData_Block: VIC 19 support
Parse_VideoData_Block: VIC 3 support
Parse_VideoData_Block: VIC 18 support
Parse_AudioData_Block: max channel=2
Parse_AudioData_Block: SampleRate code=7
Parse_AudioData_Block: WordLen code=7
Find HDMI Vendor Specific DataBlock
PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
disp clks: lcd 148500000 pre_scale 1 hdmi 148500000 pll 297000000 2x 0
[mmc]: mmc 0 power on !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
mmc0: new high speed SDHC card at address e624
mmcblk0: mmc0:e624 SU08G 7.40 GiB
mmcblk0: p1 p2
Console: switching to colour frame buffer device 240x67
regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 168K
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: ureadahead main process (52) terminated with status 5
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
[mmc_pm]: No sdio card, please check your config !!
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
udevd[181]: starting version 175
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
scsi0 : sw_ahci_platform
init: Failed to create pty - disabling logging for job
ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
ata1: SATA link down (SStatus 0 SControl 300)
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
UMP: Inserting UMP device driver. Compiled: Feb 16 2013, time: 20:47:37
UMP: Using OS memory backend, allocation limit: 134217728
init: Temporary process spawn error: No such file or directory
UMP: UMP device driver loaded
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
mali: use config clk_div 3
mali: clk_div 3
Mali: mali clock set completed, clock is 320000000 Mhz
mali: use config clk_div 3
mali: clk_div 3
Mali: mali clock set completed, clock is 320000000 Mhz
Mali: Mali device driver loaded
init: plymouth-splash main process (266) terminated with status 2
init: plymouth main process (53) killed by SEGV signal
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
[drm] Initialized drm 1.1.0 20060810
Mali DRM initialize, driver name: mali_drm, version 2.1
[drm] Initialized mali_drm 2.1.1 20101111 on minor 0
Mali DRM initialize, driver name: mali_drm, version 2.1
[drm] Initialized mali_drm 2.1.1 20101111 on minor 1
init: failsafe main process (407) killed by TERM signal
wemac wemac.0: WARNING: no IRQ resource flags set.
usbcore: registered new interface driver rtl8192cu
wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: hybrid-gfx main process (520) terminated with status 1
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: tty1 main process (545) killed by TERM signal
Warning: this sunxi disp driver will see significant redesign.
Applications using /dev/disp directly will break.
For more information visit:
[DISP] not supported scaler input pixel format:0 in Scaler_sw_para_to_reg1
UMP: New session opened
[pm]valid
[pm]valid
[pm]valid
[pm]valid
[pm]valid
[pm]valid
[pm]valid
[pm]valid
[pm]valid
[pm]valid
[pm]valid
[pm]valid
warning: process `colord' used the deprecated sysctl system call with 8.1.2.
[HDMI-AUDIO] PCM trigger start...
eth0: no IPv6 routers present
[HDMI-AUDIO] PCM trigger stop...
ehci_irq: port change detect
usb 4-1: USB disconnect, device number 2
ehci_irq: port change detect
ehci_irq: port change detect
The port change to OHCI now!
usb 5-1: new full speed USB device number 2 using sw-ohci
input: Logitech USB Receiver as /devices/platform/sw-ohci.2/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:046D:C525.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-sw-ohci-1/input0
input: Logitech USB Receiver as /devices/platform/sw-ohci.2/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:046D:C525.0003: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-sw-ohci-1/input1
[HDMI-AUDIO] PCM trigger start...
[HDMI-AUDIO] PCM trigger stop...
usb 5-1: USB disconnect, device number 2
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
[HDMI-AUDIO] PCM trigger start...
[HDMI-AUDIO] PCM trigger stop...
[HDMI-AUDIO] PCM trigger start...
[HDMI-AUDIO] PCM trigger stop...
[HDMI-AUDIO] PCM trigger start...
[HDMI-AUDIO] PCM trigger stop...
[HDMI-AUDIO] PCM trigger start...
[HDMI-AUDIO] PCM trigger stop...
ehci_irq: port change detect
ehci_irq: port change detect
The port change to OHCI now!
usb 5-1: new full speed USB device number 3 using sw-ohci
input: Logitech USB Receiver as /devices/platform/sw-ohci.2/usb5/5-1/5-1:1.0/input/input4
generic-usb 0003:046D:C525.0004: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-sw-ohci-1/input0
input: Logitech USB Receiver as /devices/platform/sw-ohci.2/usb5/5-1/5-1:1.1/input/input5
generic-usb 0003:046D:C525.0005: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-sw-ohci-1/input1